How to print smartform on both side of pages.

Hi,
I have requirment of printing the smarform on both side of the page. for example the header data and item date on front of the page and terms and condition on the back of the page... can anyone help wht printer settings and wht changes in the smartform needed... its very urgent pls help ASAP.
Thanks in advance.
Abhishek Pandey.

Hi Abhishek,
In PAGE node u have Output Options Tab.
In Output Options U can find the field Print Mode
There u need to give the D.
Default: No change of print mode
S Begin new page in SIMPLEX mode (single-sided)
D Begin new page in DUPLEX mode (double-sided)
T Begin new page in TUMBLE DUPLEX mode (double-sided)
   DUPLEX:
     The current print mode is set to DUPLEX (double-sided print, long-edge
     binding) and a new page is started. A form page defined with DUPLEX is
     always printed on the front of the page, never on the back of the page.
     If the next form page contains the attribute value DEFAULT, it is output
     on the back of the page.
Best regards,
raam

Similar Messages

  • Printing on the both sides of page

    Is there any way I can print through Java on the both sides of page? ( I mean duplex way).
    I have pdf document generated through java and I have this requirement to print some of the docs on both sides of page. Could anybody help please.

    you need to check the hardware api and send the correct command to the printer

  • How can i print on the both sides of the paper on printer 5520

    how can i print on the both sides of the paper on printer 5520 when printing too many papers?

    Hi hamad5520
    I have included a document for two sided printing.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03476083&lc=en&product=5157536&tmp...
    Hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Can't figure out how to print on the right side of a greeting card using a 5X7 when folded

    I have a HP Officejet Pro 8500A.   I am trying to print a greeting card, but cannot figure out how to print on the right side of the paper so that it's on the correct side when folded.    The paper is 5X7 when folded, 10X7 laid flat.

    shgilljx,
    Welcome to the forums. I will try to explain this in simple terms, and you'll have to play with it. We'll use plain paper, cut to 10x7. You'll need a marker, 4-5 sheets of paper.  
    Lay paper flat, number top 1, bottom 2. Flip paper over right to left. number top 3, and bottom 4.Draw a line where the fold would be on each page.1) Put paper with number 3 side up in printer.
    To create both templates using MW Office, do this. The requires 2 documents. One is graphic, one is text.
    Text template: The text will be printed on number 2.  That means your wording must be within the bottom half of the page.
    Graphic template: The image must be rotated 180 degrees.The image must be within the top half of the page.
    Print the text template. Insert side #3 into the printer. The text should print on side #2.
    Print the graphic template: Insert side #1 into the printer. The graphic should print on side #3.
    When folded, all should be correct, if I did it right.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Printing scripi on both side  of paper

    Hi All,
    I want to print script on both side of paper.
    my observations.
    the output device they are using it prints report on both side of paper.
    in script , processing mode selected D  and i am printing dunning letters.
    in main program used NEW-PAGE. that should not make any difference.
    let me know from script side what i have to do and also from my device type what else i have to check.
    urgent
    Regards
    Gopal

    hi,
      We can print both sides of the paper
    <b>You switch to duplex or tumble duplex mode with a form page for which one of these modes is specified. To continue printing in the current mode, for follow-on pages you must define another page in which the Print mode field is empty. Otherwise, the following pages after the mode switch will continue to be printed only on the front sides of new sheets of paper.
    The reason: When SAPscript sends a page with Print mode D or T to the printer, it not only sets the print mode accordingly. To ensure that the first page in the new mode is correctly output, SAPscript also instructs the printer to output the page on the front side of a sheet. If SAPscript sends a sequence of D or T pages to the printer, the output is printed only on the front side of each sheet.
    You define a first page named FIRST for a form to be printed in duplex mode. You therefore set the Print mode in FIRST to D.
    To make the duplex printing work correctly, you must define a second page FOLLOWER in which Print mode is left empty. In the form definition, you specify FOLLOWER as the follow-on page for FIRST and for itself as well.
    Your text is then printed in duplex mode. FIRST switches the printer to duplex mode and forces printing of the first page on the front side of a new sheet. FOLLOWER accepts the duplex mode and sends no further mode print controls to the printer. The printer therefore alternately prints FOLLOWER pages on the fronts and backs of sheets.</b>
    The print controls that must be defined for a device type depend upon the SAPscript printer driver that is to be used with the device type.
    set the followint print control.
    <b>SPMDU</b>
    Begin duplex printing (both sides of paper). (Needed only if supported by device.)
    <u><b>follow this link it will help.</b></u>
    http://solutions.brother.com/Library/pdf/SAP_install_latest.pdf
    http://wiki.ittoolbox.com/index.php/HOWTO:Sap_script
    regards,
    AshokReddy.
    Message was edited by:
            Ashok Reddy

  • How To Print Field Value in TOP-OF-PAGE During Line Selection.

    How To Print Field Value in TOP-OF-PAGE During Line Selection when double click on field.

    (If my memory serves me well (not used for long time ago)
    Assign values to system fields sy-tvar0 - sy-tvar9, they will replace the placeholders "&0" through "&9" in the list headers and column headers.
    TOP-OF-PAGE DURING LINE-SELECTION.
         WRITE: / 'Interactive Report &3'.
      WRITE record-vbeln TO sy-tvar3.
    Regards,
    Raymond

  • How to print the Actual Check on 1st Page if line items are more for F110_p

    Hi,
    How to print the Actual Check on 1st page if the line items are more in F110_PRENUM_CHCK script. The standard script is printing at the last page of line items.
    I tried using
    IF &PAGE& EQ '1 '
    /E 545 --> text element
    ENDIF
    but it is of no use.
    Please let me know if anyone knows. Thanks in Advance.

    Hi Krishna,
    I guess, there is no other possible way to acheive this without modifying the standard driver program. Why because? in you driver program you check window will be called only on the last page... but before you change your driver program give a try like shown below....
    Not sure, but give a try... In the first page you will be printing some void check try to replace the code inside the text element of void check with original check and make all the check void... note: in this text element, be sure you write two conditions...
    IF &PAGE& = 1.
    **PRint all check values..
    ELSE.
    ***Print void values
    ENDIF.
    Close the thread if your question is answered.
    Regards,
    Sairam

  • How to print header in first and last  page only in SAPSCRIPT

    Hi!
    How to print header in first and last  page only in SAPSCRIPT,
    in between pages,  I need to print all line items in MAIN window only .
    Thanks in anticipation!
    Aki.

    Hi All,
    Thanks for your early update...but my requirement here is
    I have two pages (FIRST , NEXT ) First is having Header, Main and Footer
    NEXT is having Main and Footer ..I am printing PO here..let us think that my PO is having 20lines items , let us assume that it takes five pages...
    Now how application is printing is ..first set of data is printing in FIRST page and remainiang data distributed to 4 pages printing in NEXT page ..but what my requirement is , I need fifth page print on FIRST page, instead of NEXT page... Ultimately I need last set of data always print in FIRST ie out of 5 pages 1st print on FIRST 2nd 3rd 4th print on NEXT and 5th print again on FIRST .
    hope you this will clear you.
    Thanks!

  • Laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly.

    laserjet 2600n not printing black on one side of page. already cleaned the laser/scanner assembly. i've cleaned the assembly a few times beofre to restor the colors as the printer is in a semi-dusti environment.  after cleaning the printer was fine, then about a week later, the black - and only the black - stopped printing on the right side of the page.  the text is straight across left to right then starts to waver and then then stops altogether.  i tried a different black toner cartidge and the problem remains.

    > so this is strictly a hardware issue as no drivers are involved. Yup. > Still prints all black.   Ok its not the controller. > Still prints all black.   Ok its not the fuser. >  its still prints all black. OK its not the laser itself > it still prints all black. Not that part either. > What else left is there?  Formatter board hasnt been mentioned.  Something is sending a command to the printer that is telling it to open up the doors and charge the entire page.  Normally the laser is responsible for charging the media.  As the media passes over the toner doors it atracts toner particles.  Then as the paper continues it rolls past the fuser where heat melts the particles into permanent place. > The power supply board maybe?   Perhaps but not likely.  If you have a spare you could try it but power supply problems usually result with the machine unable to boot or print correctly, not printing too much as you have described here. > Is there another part you would reccomend I look at?
    You could try the old Halfway test just to verify that the problem is coming from teh laser/toner part of the printer.  http://www.printertechs.com/printer-troubleshooting/halfway-test Your paper may have somehow gotten a staic charge that opposes the charge of the toner, thus auto attracting all particles in range as it passes over the toner doors.  Might want to grab a fresh ream of paper to test and rule somethign crazy like that out. Not very many options left after that.     

  • How I can print on the both sides of the paper on printer P2055d

    Can printer P2055d print on both side of the paper? How I turn on duplex? I do not have a manual.

    Hi hamad5520
    I have included a document for two sided printing.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03476083&lc=en&product=5157536&tmp...
    Hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to print on the first side and the back side, like in a book?

    HP PHOTOSMART 6510 B 211 a
    Windows XP
    Product N° CQ 761B
    [serial number removed for privacy]

    Hi AUQUE,
    Here is a link to a document that will show you how to duplex (print on both sides of the paper ).
    Along with the document is a video. Hope this helps.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Unable to enable duplex printing through e-Print (Print on both sides - flip pages on short edges)

    I need to print on both sides on the HP Envy 100 - 410a.  How do I enable this feature.  Everytime I try this on ePrint, I have the email attachment printing out on two separate papers.  If I print direct from the document, then this does correctly print on the same paper on both sides, just the way I want it.
    I need to get ePrint to work on both sides of the paper (flip pages by short edges) by emailing the attachment.
    Any help would be greatly appreciated.

    Unfortunately, Duplex is not supported on ePrint at this moment.
    I work for HP.

  • How to print a field on the last page of Smartform?

    HI FRIENDS,
    I NEED TO PRINT ONLY ONE FIELD IN LAST PAGE OF FORM SMARTFORM
    HOW DO I CHECK last page. I tried WITH THE FIELDS OF TABLE
    SYSF BUT NOT worked.
    Thank you.
    ROGERIO VAZ

    Hi,
    Goto the conditions tab of that window and enable the check box for Only after the end of main window.
    This will surely print your field in the last page.
    try this and get back to me if any issues.
    Regards,
    Anand.

  • How to print a field on the last page of Smartform with more  of 2 pages?

    HI FRIENDS,
    I NEED TO PRINT ONLY ONE FIELD IN LAST PAGE OF FORM SMARTFORM
    HOW DO I CHECK last page. I tried WITH THE FIELDS OF TABLE
    SFSY BUT NOT worked.      
    The form has  more of  2 pages.
    Thank you.
    ROGERIO VAZ

    Hi ,
    You dont have to hard code anything to achieve this functionality,
    just create a window and in that window define a text element to print
    that variable.In the conditions tab of that window check the check box
    "only after end of main window".i think you might have used a main window,
    so irrespective of the no of pages the smartform prints,it always displays that
    field in the last page of the smartform.
    regards,
    srikanth.

  • How to print Smartform in Draft mode.

    HI all,
    we are using Wipro LQ DSI 5232 printer, our problem is while printing smartform , its coming in Roman but it should come in Draft Mode.
    When it goes to Roman mode the printing become very slow.
    How to set in default Draft mode.
    Regards,
    Rahul.

    Hi,
    there is an SBO setting inside
    Administation>System Init>Print preferences>Print Draft Watermark on Draft
    Then a "DRAFT" watermark will appear if it's printed before adding.
    In CR use a stored proc to get data back according to the Objectid@.
    Then if its the object id of a draft then add a CR watermark.
    Hope this helps.
    Regards,
    D

Maybe you are looking for