How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

how to print to my wireless all in one photosmart prem c410 when printer is not powered on?

Hi,
You cant print to a printer that you physicly turned off. Most network printer have a sleep mode, so leave it on and after a while it should go into a sleepmode. And should wake up when a printjob is being sent.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

HT4356 I have an air-print enabled printer: HP Premium e-all-in-one C310. Can't print from iPad iOS6. They're on the same network, but have different IP addresses. On the iPad it's 192.16.1.126 and on my printer it's 192.168.1.133. Can I match them? H

I can't print from my iPad2 to my air-print enabled printer (HP Premium e-all-in-one C310). They're on the same network, but have differed IP addresses! The iPad IP is 192-168-1.126 and the printer is 192-168.1.133. That's the only difference I can see. Is there a way to fix this?

fyi:
you put periods between the numbers.
Each device needs a unique number.
for the 192.168.1 the right must number should vary. 192.168.1.x
the numbers you have look ok.
Power off all devices: wifi router, printer, ipad.. wait 10 minutes. poweron router ... wait power on printer wait then power on ipad.
cross fingers.
Robert

"Incompatible print cartridge" error from All-in-one Photosmart Premium C309g-m

I just bought a new Photo Black cartridge for my printer, and I'm getting this message on my computer when printing:
"The following print cartridge(s) is/are not intended for use in this printer as it is currently configured.
Photo black"
I already tried reseating and cleaning the cartridge with no change.
Can anybody tell me what this means or offer suggestions on next steps? I really don't want to have to buy another cartridge.
Thanks,
-- Chris

Hi Comptronic; thanks for your suggestion.
I checked my cartridge--it's an HP Photo Black 564, which matches what the site you suggested says. The other 4 cartridges are also 564s, and it's only this one that reports the problem, so I think it's the right one.
When this error occurs, does this mean the printer isn't using the cartridge, or does it still use it anyway? The printouts look about the same despite the error, so I don't know if it's still using the cartridge or compensating with the other 4 cartridges.
Thanks,
--Chris

C6180 All In One Photosmart. Software and drivers will not install on Windows 8.

C6180 All In One Photosmart
on
Windows 8 64bit
Acer Aspire V5-552PG
AMD A10- 5757M
Radeon HD 8750M dedicated
Software and drivers package will only unpack but not install.
When the unpacking bar reaches the end, it disapears without any following actions.
I have of course tried it over again many times, and I have deleted the download and redownloaded it again but the same happens every time.
Any idea on how to solve this?
Sincerly
FLFO

HI FLFO:
I have done some research on your post. I have found a document with steps to help resolve the stall you're experiencing during your printer installation.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&lc...
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Envelopes do not print properly using an All-in-One Photosmart C410a and C310a

My HP C410a is USB attached. Serial
Using Windows 7, SP2 (Home Premium - desktop); and Windows XP (laptop)
Using Word 2010 (WIN7) and Word 2007 (WIN/XP)
The printer has latest drivers: PS_AIO_07_C410_FSW_Full_Win_enu_140_222.exe
April 1, 2010
It prints normal pages OK, e.g.: there are no anomalies.
But, when I print an envelope from Word 2010 it does not print on the envelope as expected (a No. 10 envelope), but rather the printer IGNORES the formatting in Word and prints the address as if the envelope in the printer is an 8-1/2”x11” page, in landscape mode (the only correct action).
I have uninstalled and deleted the driver multiple times.
Yes, I last did the uninstall Sunday June 12, 2011; followed by a fresh install.
Yes, I printed an envelope after the fresh install and it printed properly.
Today, the anomaly (the address prints in the wrong location, e.g.: middle of an 8-1/2”x11” page) has recurred.
Between Sunday and today, I did not make any changes in my system, e.g.: no Windows, Office, etc. updates. And, I did not change any of the envelope formatting or print options in Word 2010.
This is NOT a physical problem, rollers, print head, etc. as the printer is barely one month old --- and do note that the envelope (actually multiple) printed properly the other day - Sunday.
This is not the first time that this has occurred. Yes, on previous occasions I uninstalled and installed the drivers.
AND, more importantly, I have a laptop that uses the same printer, same driver, and Word 2007. It too now prints the envelope address incorrectly, e.g.: as if it is an 8-1/2”x11” page.
Hence, there is something inherently bad, wrong, defective, etc. inside the printer itself.
Before sending me on an Easter egg hunt, do notel:
Restarting, e.g.; power off /on /off / on does not work or fix the issue.
Uninstalling drivers and reinstalling drivers does not work, as explained.
Switching PC’s, as explained does not work.
Using different software suites, e.g.: Word 2007 (Windows XP – Professional) and Word 2010 does not work.
There are NO new updates from HP per the HP Solution Center.
What is HP’s solution?

This is not a problem with the printer - Word 2010 has it's own way of printing envelopes and labels that you must follow regardless of the printer. I have included some screenshots below to guide you along - I hope you find this helpful. The 3rd pic has the important areas marked with red rectangles - those are different from the defaults that Word ALWAYS seems to present at least on my system. With the following procedure, load the envelope as instruction in the HP Solution Center How-Do-I... videos (search for envelope - it should be among the first few articles you are presented in the search results).
Regards,
Himanshu

HP B210 all-in-one Photosmart Plus won't print black when new black cartridge installed!!

Ugh!! This printer is driving us insane! EVERY time we install a new black ink cartridge (HP 564) the printer decides it doesn't want to print black any more! I've tried the whole cleaning this and that they say is needed. I've aligned, reset, etc. and nothing works. What makes me mad is the printer works fine until the day we swap out the black ink. I've had this issue before but it was random luck it came back to life and we have no idea how it happened. What can we do to fix this ANNOYI NG problem?? Thanks in advance.

SaraLV wrote:
By the way: after this whole conversation, suggesting the standard troubleshooting steps is RIDICULOUS.That might be true if one could assume that someone posting in the thread has already read (and tried) the posts in the thread. My experience is that there are many folks that find a thread, perhaps through a Google search, but they do not actually read the thread but rather put their information on the end of the thread as a reply. I see this even when there is a solution marked for the thread, the thread here is a good (or bad) example of this. For your case have you tried the standard troubleshooting steps? Did you check the vents? Did you try soaking the printhead as described here? Is there any sign of black printing at all in the test page?

How can i add a wireless printer HP officejet 6310 all in one? is it possible

How can i add a wireless printer HP officejet 6310 all in one? is it possible..?

Hi @millep
To answer your question, no the Officejet 2620 is not a wireless printer;
- Source: Printer specifications
As for the USB cable, personally, I believe the intention is to bring down the cost of the printer by selling the USB cable separately. Many people already have printer USB cables kicking around the house, so instead of paying more for the printer and having an extra cable I believe the theory is reduce the cost and sell the USB separately for those who need to purchase one.
I hope this answers your inquiry.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing problem - HP Officejet Pro 8500 Wireless All-in-One Printer, Red color fads on 4th copy

I have an HP HP Officejet Pro 8500 Wireless All-in-One Printer, and am trying to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have brand new HP ink, and am printing on HP Color Injet Paper. I have renectly replaced the Black/Yellow printhead (at least 6 months ago). At first when I cleaned the printheads, I could print 2 or 3 pages showing my RED color. Then turns back to magenta. When I received the test patterns after cleaning the print heads they are all perfect with no lines.
What is going on and how can I fix it?
This question was solved.
View Solution.

Hi TM1997,
I understand you have an Officejet 8500 Wireless that is not printing red properly, it keeps turning to magenta. I'm sorry to hear this, but I will definitely do my best to help you!
As I'm sure you saw, when replacing the black and yellow printhead, that there are two printheads in the Officejet 8500 and the second one controls the magenta and cyan. I would suggest that you first have a look through this Troubleshooting Print Quality Issues document. You can also manually clean your printhead with the steps in this 'The Following Printhead Appears to be Missing or Damaged' or 'The Following Printhead has a Problem... document.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

I have a HP office Jet 4500 wireless All- In One, how do I delete the customer participation program

Hi
The customer Participation Program is taking up so much space that I want to remove it from my laptop.
I have a HP Office Jet 4500 wireless All In One. When I attempt to remove it I get a message that says if I remove the program
my device will no longer work.. How can I safely remove it without damaging my equiptment from working?

couple of questions about this:
Are you scanning from the printer, or with software on the computer? If from the computer, are you initiating the scan from Windows, HP software, or Word?
If you put a legal size document in the feeder, and press scan, unless the defaults have been changed to letter size, it should scan the entire legal size sheet. You should be able to go into the settings and change that if the default has been set to letter.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Solution centre not working for windows 7 and wireless all in one, altho can print ok

I have installed an officejet 6500 wireless all in one on my HP Elitebook running Windows 7 64 bit.
Although the printer installed - albeit with an error for Microsoft.net4 that was resolved after a re reboot - HP Solution Centre v14 wont start. Indicated device installation wasnt complete, plugged in USB and tried to uninstall/re-install all same thing.
Ran Network, scan and print utilities and have MacAfee and firewalls all dis-abled during install. After the error pop up it just closes.
The printer works fine and I can scan through the webscan option but what's happened to solution centre?

Great information.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Officejet Pro 8500 Wireless All-in-One Printer - A909g printhead

The printer has not been 100% for a few weeks. It would align the printhead fine. When printing, it didn't always print everything - one time blues would be missing, another black would be missing. Received a message saying the ink was out of date. Picked up new ink yesterday, installed it and the printer went thru it's normal routine - cleaning and aligning. It would print the page which was not good and then realign again.
I read up on how to change the printheads. Problem is the printheads are stuck over to the right. I have pressed the * button and done anything else I could find. What do I do now?
Carol Belles

Hey @carolinva,
I understand that you're having print quality printhead related issues on your HP Officejet 8500 Wireless All-in-One Printer. I would like to work with you today in resolving the issue of not being able to remove your Printheads. Now I understand that you have already tried new cartridges and run the cleaning and aligning on the product to no avail. At this point you have determined that the printheads are defective.
Just so you are aware there are two printheads in your product. There is a Black and Yellow Printhead and a Cyan and Magenta Printhead. Because your quality issue is affecting blues and blacks than both printheads may be defective. The printheads run for about $64.99 a piece plus tax in the United States. Also, there is a chance that you could replace both printheads and the issue not be resolved because it's a hardware failure of your ink system. Therefore, the next step would be to replace the printer. New printers do not use the same ink systems as your Officejet 8500 printer so the Printheads would do you no good if you have to replace your product.
Part Number for HP 940 Black and Yellow Printhead: C4900a
Part Number for HP 940 Magenta and Cyan Printhead: C4901a
I'm going to provide you steps on how to properly remove the printheads in your product. Because your printheads failed to initially move to the left I'm going to have you start by running a power reset.
Step 1: Power Reset:
With your printer powered on, disconnect your power cable.
After 30 seconds, plug your power cable back in to the printer.
Your printer should turn on automatically.
Once the printer returns to the ready state, follow the steps below.
Replacing the Printhead for HP Officejet Pro 8500 All-in-One Printer Series (A909)
Please let me know if the steps provided resolve your issue. Should you have further issues be sure to let me know. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Scanning to Computer, HP Officejet Pro 8500 Wireless All in one Printer A909g

I am unable to scan to computer with Win 8.1 using my HP Officejet Pro 8500 Wireless all in one Printer A909g. I can scan to email. The system says my drivers and software are up to date. When trying to scan to computer all I get is a blank scan file with no scan number (Scan_Doc0054) as I used to with Vista. In Vista I was able to drive the whole process from my computer. When scanning to email now I have to drive it from my printer as opposed to the computer.
I restarted an old computer running Vista and the 'scan to computer' function is operational. As far as I am aware there are no other functional problems with the printer.
Any help would be very much appreciated. Thank you.

Hi John046,
I am sorry to hear that did not work for you, I do have some more options for you to try:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. Windows Defender - Turn On or Off in Windows 8.
Disable any firewalls. Disable firewall Windows 8.
Re-install using the HP Printer Install Wizard for Windows.
If that does not resolve your issue, please call our phone support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8500 wireless all-in-one printer

Just bought second-hand HP Officejet Pro 8500 wireless all-in-one printer. Have no clue how to get it working. I plugged it in and it seems to be operational, but when trying to print, it did not work. Have an HP Pavilion laptop with Windows 8.1. Can anyone help me?

Hi @trudi39 , and welcome to the HP Forums!
I can see from your post you are experiencing print issues. I would like to help!
Do you receive any errors?
Does it print a blank page, or nothing at all?
Are you connected via wireless, ethernet or a USB cable?
In the meantime, I would recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Problem with HP Officejet 6500 Wireless All-in-One Printer - E709n

I have a HP Officejet 6500 Wireless All-in-One Printer - E709n that keeps going off-line all the time.
How do I fix this problem?

What operating system? If Win 7 64-bit, try this: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=mp-89191-1
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How to print to HP PSC1110 All-In-One Printer connected to WinXP PC?

Hello everybody,
I would like to us an HP PSC1110 "all-in-one" printer connected to a Windows PC in another room.
The easy part: The printer shows up in the browsing window, under the correct Windows domain, when I try to add an "other Printer" device.
The difficult part: When I try to select the printer model from the list of HP printer models provided, it does not show up, although HP PSC 1110 is included in the list of supported printers.
I also tried the ESP HP-deskjet drivers, both old and new version. But those result in printer errors on the Windows PC.
BTW: Printing over the net works well from other Windows PCs!
Can somebody out there who had a similar problem before give me a hint how to set up printing to an HP "all-in-one" over the Windows-Network?
Thank you,
Detlef

Thank you for the detailed information. Maybe I should have added a few screenshots too.
The suggested procedure probably works for a HP Photosmart Printer. However, the PSC1110 is a "Printer, Scanner, Copier" all-in-one device. Unfortunately, this one does not show up in the menus, although it is supposed to be supported. I assume that only an USB backend is available, but no SMB backend.
Is this correct? Is there a workaround?
Thank you for your feedback
DC

How to print to my wireless all in one photosmart prem c410 when printer is not powered on?

Similar Messages

Maybe you are looking for