How To Print To Video?

I have a cheap PAl video camera I need to put my video on to submit to a Film Festival and when I capture through the camera (I shot the footage on a different PAL Camera)it captures but when I try to print to video it doesn't work. What can I do? Thanks!

What seems to happen?
What camera is it? Try switching to FW Basic (not sure that really helps, but sometimes magically it does).
Have you done this before?
Will it CRASH RECORD directly from the timeline?
OH -- here's an important question:
When you play the timeline with the camera connected... are you able to see it on the camera's display? (Make sure external video is set to ALL FRAMES (VIEW menu))
Good luck,
CaptM

Similar Messages

  • How to print to video multiple sequences

    I currently utilize FCP4 HD. How can I print to tape/video multiple sequences without nesting?
    G4 Power Mac Desktop   Mac OS X (10.3.9)   FCP4 HD

    David,
    I respectfully disagree. I call 'nesting' the merging of all clips in a selected group into one quasi-clip (Sequence->Nest Items). Sort of like like merging layers in Photoshop with the difference being that in FCP you can still access individual clips or layers in a nest by double-clicking to open the nest in it's own Sequence.
    You can apply a filter globally to a nest by dropping the filter on the nest - the filter will affect every clip within the nest. You can't do that with the copy & paste method.
    The copy & paste method doesn't merge anything; all clips and layers remain as they did in the Sequence from which they were copied.
    Calling that method 'nesting' would only serve to confuse people because they are two distinctly different actions and treated differently by FCP.
    -DH

  • How to print to video a 24fps project?

    hi everyone,
    i'm trying to make an NTSC copy of my 24fps project that was generated from clips that were original NTSC but reverse telecined in cinema tools.
    the camcorder seems to record the audio but it doesn't record the video.
    really appreciate any advice ASAP. thanks!
    joshua

    you need a 24fps deck. Your camera is 30fps. the only deck you'll find will be the HDCAM that's $1000 per day to rent.

  • How to Print a Character in Reverse video ...?

    Hi Could any one of you help me " How to print a character in Reverse Video " in SMART Forms and in SAP Scripts.
    Regards,
    Saravanan
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Mar 26, 2009 5:31 PM

    deepak_c3 wrote:
    Thanks for the info.,
    where should the page number n-1-i be returned ?
    Which method implementation of Pageable interface should return the page number ?w.r.t. your first question: don't return that number but return page n-1-i when page i is requested; your document will be printed in reverse order. Your class should implement the entire interface and wrap the original Pageable. (for that number n your class can consult the wrapped interface; read the API for the Pageable interface).
    kind regards,
    Jos

  • How to download How Do I? videos for my HP Officejet 6500 E709n printer?

    Dear Sir or Madam: Is there any way to download "How Do I?" video clips from the HP Solution Center for my HP Officejet 6500 E709n printer and save them directly to the desktop area of my Windows XP Home desktop computer? Please reply back soon. Thanks. Sincerely, Egan

    See requirements for AirPrint (http://support.apple.com/kb/ht4356):
    If your printer supports AirPrint but does not work then:
    Your printer might need a firmware update
    Your printer must be on the same WiFi network
    Your router must support Bonjour (Zero-configuration networking).
    For troubleshooting:
    Turn Off iPad, WiFi router (remove from power), and Printer (remove from power).
    Turn on WiFi router
    Wait 30 seconds
    Turn on printer
    Wait 30 seconds
    Turn on iPad
    Try to print.

  • Customize countdown in Print to Video--How to??

    Customize countdown in Print to Video--How to??
    FCP 4.5HD.
    Ted.

    If you didn't use black after the couple of frames of the "2," what would you put between there and the starty of program?
    You CAN change the black if you want... but there's a reason for :02 of black:
    It's expected and necessary in live television.
    Black is necessary on the tape in order to be able to go from "black to black" as when going into a commercial break.
    ------- stop here if you don't want the background on why---
    The tape is cued to a specific number of seconds ahead of sound and then rolled when the director calls a "roll tape" or "Roll VTR _" cue. The countdown rolls by in the monitor, and the director and technical director can see when picture's up, then take the video.
    There's usually a fade to black out of program and then eithe a cut or fade to the next video/audio source.
    A similar process happens at the end of the commercial. At a specific number of seconds before the end of commercial #1, commercial #2 is rolled... then taken... and so forth if things are coming off of separate tape machines.
    Black at the head and tail of spots lets a simple routing switcher make the change from playback device to playback device.
    In the "olden days" before automated tape playback machines, commercials were either on film reels (edited together into clusters with a countdown at the beginning and black leader on the tail,) on a videotape that was edited together in a similar fashion... or... (sometimes dangerously so) rolled from four or five different tape machines "live" on the air.
    If things were rolled "live," one right after another, I'm sure that there were a lot of praying break operators in stations where equipment was old, maintainence was lax and Murphy was a regular visitor.
    The countdown and black on each commercial was a necessary timing tool in order to get through the break cleanly. I can tell you from experience that NOT having them made life verrry dicey when it came to getting in and out of program elements cleanly.
    The RCA TCR 100 Cart machine and the Ampex model that did the same thing) would play all the elements in a break and do the switching in between... simplifying the process... until there was a breakdown of the machine, and then you should have seen the scramble in Master Control and/or the tape room.
    Its a lot different these days if the station or network airing the commercials plays spots (commercials) off a file server... it's a different game entirely.
    Everything is automated and "trimmed" when it's transferred (or start and finish marked on the file).
    In that case. the countdown is not needed to get the commercial on the air... but is included to ensure that there's a reference for where the spot actually begins. The :02 of black is still included, since stations traditionally fade or cut to black between spots.
    The countdown itself was designed to allow theater projectionists make smooth changes from reel to reel as a movie was projected on the screen.
    The projectionist would thread the film on the incoming projector so that the first "10" was in the gate.
    As the outgoing reel ended... little cue dots in the upper right hand corner of the screen "cued" the projectionist when to roll the upcoming reel... and then a specific number of seconds later—ten in our example—a second set of cue dots (four frames worth) on the screen would cue him to hit the changeover button, opening a douser on the incoming projector and closing one on the outgoing projector... and swapping audio sources at the same time.
    The countdown performs a similar function in live television: The tape is cued to a specific number of seconds ahead of sound and then rolled when the director calls a "roll tape" or "Roll VTR _" cue. The countdown rolls by in the monitor, and the director and technical director can see when picture's up, then take the video.
    You'd think that woould be the case for movie packages and syndicated television shows, right?

  • How do I print to video on a Sony PD 150?

    I can't figure it out! The timeline displays on the LCD monitor of the Sony camera. I can hear the sound through the camera's headphones. But when I choose File > Print to Video... and then choose OK, it tells me "Ready for playback, click OK to start recording media onto deck".
    I click OK, but then I get "Unable to perform edit operation. The tape appears to be write protected or the deck may be in Local mode."
    Does anybody know what I need to do? The tape is not write protected, but the camera belongs to a friend and I don't know anything about Local mode.
    Please help. Thanks!

    On the PD 150, you close the outside door without first closing the tape carriage on the inside. By doing so, the inside metallic carriage that physically holds the tape doesn't quiiiiite click into place (although the outer door has clicked shut). But since you heard the click, you assumed you were fine. And then you pulled your hair out for half an hour.

  • How do I print to video  HD footage captured from HD Canon HD20?

    So far I've not seen any solutions on the discussion threads for those of us who are unsuccessful in printing to video via firewire back to our HD cameras for archive or display on a HD display via HDMI.
    I have combed the posts in several places for settings, and believe mine are correct. FCP
    seems happy to export. My camera is obviously not recognized so that it can record.
    This seems to be a serious, major, and wide-spread flow in FCP's current work flow, or
    am I "unclear" on the concept? Thanks in advance! Apple folks... are you there??

    Well, I just BOUGHT this camera yesterday (HV20) and...well...I haven't printed back to tape yet. Don't think I plan to. I'll be making DVDs and outputting to higher end HD formats...like DVCPRO HD or...or...well, that's probably about it.
    I don't know what the issue people have with Canon is. I have a GL-1...never had an issue shooting and capturing with it. I pulled the HV20 out of the box, switched it to 24f mode, shutter to 48. Shot for 10 min, captured it without an issue (HDV 1080i60 Firewire Basic) and even captured ONE clip...the camera was started and stopped a dozen times.
    But, I haven't printed to tape. I just wanted to say that I have had a positive experience with the camera.
    http://docs.info.apple.com/article.html?artnum=306389
    Shane

  • Problem with Print to Video in FCP 6.0

    In the past I have been able to print to video with FCP 5, now not working with FCP 6. My Sony HVR A1U is seen by FCP, I can log & capture no problem. When I go to print to video, the sequence does not show up on my camera LCD and I cannot capture it. I have checked the system profiler and under firewire the camera is listed. In the print to video window I have checked Automatically Start Recording, but this has no effect.
    Thank you for your advice

    Just curious. How do you get your computer too see the HVR. I am using I movie HD and it does not see anything. Is there a camera setup procedure? I looked at the vague manual which was no help.
    Thanks in Advance
    Thom

  • Print to video HDV not working

    I'm having problems with printing my HDV project to the camera.
    On a DV project it works, but when I open my HDV project I cannot choose any external video options,
    I can log and capture, but not the other way.
    I read that the edit to tape function does not work in HDV, but printing to video should.
    Just don't know how
    Maybe someone can help me
    Thank you!

    If it's a sony camera involved, select the "Easy Setup" that matches the sequence setting... like 1080i for example, and see if this doesn't clear things up. Make sure the camera is in VTR mode as well. If it's not a Sony camera check the settings it uses here: http://www.apple.com/finalcutstudio/resources/devicelist.php
    Jerry

  • FCP7  print to video doesn't work on one timeline but does on another., FCP7  print to video doesn't work on one timeline but does on another.

    I have a project which I captured from .mov and want to print to video : dvd.  The image shows on the monitor but does not work to capture.  The other sequence that is open does run to capture.  What's wrong and how do I fix it.
    Thanks
    BTW, we do this a lot!!!  This glitch is new.  And yes we have rendered the sequence.
    Tom

    Print to Video only works with some Sequence settings via Firewire to the recording device.  Are your Sequence settings for both Sequences the same?
    -DH

  • Project won't print to video

    Hi,
    I have FCE2. I'm trying to print my project to video. I've used both Sony and Canon Mini DV camcorders. When I hit "Ok to start recording media onto deck", the project plays back ontop of a black screen on my computer and my camera is rolling, it says "rec", there is timecode moving, but when I play it back, nothing is there. It does not record anything.
    When I do the same thing in iMovie, it DOES work! I can see what I'm recording in the camcorder and it DOES print to video and it DOES playback after I'm done.
    What am I doing wrong in FCE2?
    Thanks,
    Squibb

    Please give full specs for your system, computer, drives, devices, how everything's connected, settings on the camera in record mode, settings in FCE. Trash your preferences, reboot, connect everything correctly, launch the application. Does it see the camera? If not, do not proceed to PTT.

  • How to print a series of index photos billfold sized photos

    I would like to know how to print index sized photos as well as a series of wallet size photos (all of different subjects) on teh photosmart 7520 all in one....there has to be a way to do it.  
    This question was solved.
    View Solution.

    Thanks, Banhien.
    Sharon, here's a link to the multi-up prints templates, which put multiple photos on a page:
    Learn More: Multi-up Prints
    For more options, try the collage print projects. Both are in the Prints menu.
    Hope this helps,
    RocketLife 
    RocketLife, developer of HP Photo Creations
    » Visit the HP Photo Creations Facebook page — news, tips, and inspiration
    » See the HP Photo Creations video tours — cool tips in under 2 minutes
    » Contact Customer Support — get answers from the experts

  • How to print envelopes hp laser jet pro mfp m225dw

    Can you please advise as to how I can print invitation style (4 3/8 x 5 2/4) envelopes on the Laser Jet Pro MFP M225dw?  Also, if my template is set up for a horizontal mail merge configuration, how should the envelope be inserted into the printer?

    Hey @Shaggs,
    I would like to assist you today with printing on envelopes with your HP LaserJet Pro MFP M225dw.
    Please refer to the document below for step by step instructions on how to load envelopes in your printers paper tray:
    Loading Plain Paper and Envelopes
    Once you have your envelope loaded properly, open up the program that you want to print envelopes from. Because Word seems to be the standard program that people print envelopes from I'm going to provide you with the envelope printing instructions for that specific program. Should these steps not work for you, be sure to respond to this post with your Operating System and the program that you're printing from.
    What's my OS?
    How to Print Envelopes from Word:
    1. Open Word and click on Mailings at the top
    2. Select 'Envelopes' from the top left hand side
    3. An Envelopes and Labels page should now open. Enter your Delivery and Return Addresses.
    4. Select 'Options' on the bottom right hand side.
    5. Under the 'Envelope Options' tab ensure that your Envelope size is appropriately selected.
    6. Select the 'Printing Options' tab at the top. You now need to select the appropriate Feed Method for your product.
    7. Make sure that you choose the 'Face up' option.
    8. Also ensure that 'Clockwise Rotation' is not selected.
    9. Hit 'OK' and 'print'
    Here is a video for additional instruction:
    Please respond to the this post with the result of your envelope printing. Thanks for reaching out to the HP Support Forums. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Can Print to Video HDV sequence

    Hello, I am trying to export an HDV sequence to a miniDV tape for broadcast. I am using a Sony GV-HD700 tape deck. I am using Print to Video and it just wont work. Any help would be appreciated, thanks!

    I am having this same problem, and need help urgently. Does anyone know how to resolve this? I can control the deck through FCP and the FireWire cable, and can even initiate automatic recording from FCP, but once it starts playing the content the deck freezes and does not actually record anything.

Maybe you are looking for