How to print u0080 in SAP Script

Hi Experts,
   I have one small issue, i want to print €  symbol in sap script. If i puts this an hardcode vallue, but its not accepting this symbol.
  Plz anyone guide this, how to display and print the above symbel in script.
  This symbol is not available in displayable charactor area also.
Point will be sure.
Regards,
Mohana

Form to translate unicode symbol € to superscript €
you can use this in subroutine i think this may be usefull to you before that you need to select the radio button of super script in charecter format for that perticular format
FORM FORM_NAME TABLES  inttab STRUCTURE itcsy
                           outtab STRUCTURE itcsy.
*Data Declaration.
  DATA : V_TEXT1(320).
  DATA: BEGIN OF ITAB OCCURS 0,
        WORD(40),
        END OF ITAB.
  READ TABLE inttab INDEX 1.
  V_TEXT1 = inttab-value.
  REPLACE ALL OCCURRENCES OF '€' IN V_TEXT1 WITH '<SP>€</>'.
  READ TABLE outtab INDEX 1.
  IF SY-SUBRC = 0.
    MOVE V_TEXT1 TO outtab-value.
    MODIFY outtab INDEX 1.
  ENDIF.
ENDFORM

Similar Messages

  • How to print lables in SAP SCRIPT

    Hi all,
      Here i have a requirement in SAP Script How to print the lables instead of Hard coding the field Description. Please help me how to do.
    Regards
    Raghava

    Hi
    First Create a Lable in script
    Refer This link for creation of lable in SAP SCRIPT 
    How to create lables in SAP SCRIPTS?
    Ranga

  • How to print ADDRESS in SAP Script

    Hi All,
    I want to print address using ADDRESS command in SAP script. I am using folowing code:
    ADDRESS PARAGRAPH AS
           TITLE       &ADRS-ANRED&
           NAME        &ADRS-NAME1&, &ADRS-NAME2&,
           STREET      &ADRS-STRAS&
           POBOX       &ADRS-PFACH& CODE &ADRS- PSTL2& CITY &ADRS-PFORT&
           POSTCODE    &ADRS-PSTLZ&
           REGION      &ADRS-REGIO&
           CITY        &ADRS-ORT01&, &ADRS-ORT02&
           COUNTRY     &ADRS-LAND1&
           FROMCOUNTRY &ADRS-INLND&
    ENDADDRESS
    Here in output I am getting Title, name1, & name2 in different lines. But I want that Title, name1 and name2 in same line.
    I tried putting title, name1 and name2 in same line but then neither title nor name1, name2 are getting displayed.
    Please tell me how I can do the same.
    I have heard that SAP displays the address according to country standard. Please let me know in which table the country specific setting is stored.
    Regards,
    Vijay

    Hi,
    country code stored in this T005T. Adjust the tab positions on script then only u will get all the title, name1, name2 will get in one line.
    regards,
    ravi shankar reddy

  • How to print Barcodes in SAP Script

    Hi All,
        I want to get print out of Custom barcodes in Script,
    The scenario is  its been displaying only in the print preview, and when I print that page its not printing the barcode.
    Regards,
    Kamal

    Hi,
    Hope this link will provide you som info.
    http://help.sap.com/saphelp_46c/helpdata/en/d9/4a94c851ea11d189570000e829fbbd/frameset.htm
    Regards,
    Arun

  • Printing checkboxes in SAP script

    Hi,
    I have a requirement where I need to print checkboxes for all the items displayed in SAP Script output.
    Is there any way to print checkboxes in the output document?
    Regards,
    Rajesh Bhogi

    Hi Rajesh,
    Below link can be useful for you:
    How to print u0080 in SAP Script
    Hope this will help.
    Regards,
    Nitin.

  • How to use print control in Sap script

    I would like to use print control in Sap script.Actualy my problem I have security font Troy ECF. Using this font I would like to print amount field in Check printing.
    we count download this font with sap .we talked to customer care they told we should hard code in sapscript. pls can any1 help on this how to do and how to use print control for this fonts.

    call this funcation. crate_text.
    CALL FUNCTION 'CREATE_TEXT'
             EXPORTING
               FID               =
               FLANGUAGE         =
               FNAME             =
               FOBJECT           =
             SAVE_DIRECT       = 'X'
             FFORMAT           = '*'
             TABLES
               FLINES            =
           EXCEPTIONS
             NO_INIT           = 1
             NO_SAVE           = 2
             OTHERS            = 3
           IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
           ENDIF.

  • How to know print program for SAP Script

    Hi friends,
    how to know print program for SAP Script form name ?

    Hi ,
      You can use the following code changes in the layout & see..
    You have to create a program Z_BC460_EX4_HF for that..
    /:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
    /:  USING &CUST&
    /:  CHANGING &NAME&
    /:ENDPERFORM.
    Dear &NAME&
    The ABAP routine could be defined as follows:
    IMPORTANT: The structure itcsy must be used for the parameters.
    REPORT Z_HENRIKF_SCRIPT_FORM .
      tables scustom.
      form get_name tables in_tab structure itcsy
                           out_tab structure itcsy.
      read table in_tab index 1.
      select single * from scustom
        where id = in_tab-value.
      if sy-subrc = 0.
        read table out_tab index 1.
        move scustom-name to out_tab-value.
        modify out_tab index sy-tabix.
      else.
        read table out_tab index 1.
        move 'No name' to out_tab-value.
        modify out_tab index sy-tabix.
      endif.
    You could also fill the ouput parameter table this way
       READ TABLE out_par WITH KEY 'NAME1'.
       out_par-value = l_name1.
       MODIFY out_par INDEX sy-tabix.
    endform.

  • How to Hide Print Privew Option (Sap Script)

    hi friends,
    i dont want print privew option (SAP SCRIPT) after executing the program the report shows output directly insted of showing print privew option.
    please reply.
    thanks in advance.
    regards,
    bhaskar

    Hello,
    When using the OPEN_FORM
    Set the field of the <b>
    ITCPO-TDNOPREV = 'X'
    </b>
    VAsanth

  • Search print program and sap script

    hii , how can i find  trigring print program and sap script  for a particular  purchase order.
            regards  Aditya
    Edited by: aditya shrivastaba on Apr 14, 2008 9:59 AM

    Hey,
    First go with Me22 or 23 with po that you had, and then check with output type for that in the transaction. After that go to TNAPR table and check the corresponding form and print program.
    Or else, go with NAST table in that put PO num in 123456 and put in OBJKY field in nast table. It will give you the output type of it, so that u can find the print program and lay out in TNAPR
    Many thanks,
    Raghu.

  • How to assign modified forms (SAP scripts etc.,) to Dunning texts

    Hello, how do I assign forms (SAP scripts etc.,) to dunning texts according to no 5 above?
    I've copied the form f150_dunn_01 and modified it. Now I want to assign my modified form to dunning text. In txn fbmp I have created new procedure and when I clicked on Dunning texts it takes me to dunning text screen where I should be able to assign my modified form. But the screen is greyed out and not editable. Is there anything I'm missing or I've permission issue?
    Please help
    Regards
    Naz
    Most of the config for Dunning is done with TCode FBMP.
    Key Steps are :-
    1.     Define the dunning procedure or use the standard
    2.     Define the dunning levels (desired stages of reminder)
    3.     Define the dunning interval (frequency of reminder)
    4.     Line item grace periods & Min.days in arrears (acct) govern the criteria for picking items to be dunned along with Minimum amounts
    5.     Assign forms (SAP scritps etc.,) to dunning texts. Forms contain the contents of the reminder notice and the format of notice.
    6.     You can include the Sp GL Transactions as well.
    7.     Customer/Vendor Master Records needs to be updated with the Dunning
    8.     Procedure etc, Dunning tab in the master data
    9.     Use F150 to run.

    Hi Praveen,
    Ok let me go through the steps that I have done so for.
    1. New dunning procedure 004 been created in Txn FBMP
    2. Then by choosing the assigned dunning procedure 004, trying to update the form by selecting the company code and then Dunning text. But the screen is grayed out.
    Please pass me your email address then I will send you the screen shoots.
    Thanks
    Naz

  • How to test the performed  SAP SCRIPT

    Hi friends can any one help for
    how to test the performed  SAP SCRIPT. What are the necessary codes or anything else for performing it

    Praveen,
    Can you be much clear with your query? What do you mean by performing? Do you mean how to execute it ?
    Regards,
    Vinod.

  • How to View Smartforms or SAP Script Forms in Web Dynpro ABAP

    Do anyone have idea of how to View Smartforms or SAP Script Forms in Web Dynpro ABAP?
    Please let me know. Thanks

    Hi Sameeksha,
    You can display an smartform in WDA as an pdf file. Try go through this [article |https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0de1eb8-0b98-2910-7996-8a3c2fcf6785]where Nanda does explain about the same.
    Regards,
    Uday

  • What is print program for sap script?

    some of the print program of sap script.
    and also guide me to use that program

    for which sapscript ?
    you can use table TNAPR to find the print program and layoutset for output types. Maybe it will help you.
    regards,
    Hans

  • How to deal with Print Controls in SAP SCRIPT

    Hello All...
    I have two requirement in SAP SCRIPT for which I will need to use PRINT CONTROLS.
    1) To print a window with 90 degree rotation
    2) In the same window I wanted to have black background and white text printed on it.
    For rotating the text,
    Primary basis I created two Z print controls using SPAD.
    One to rotate with 90 and another to rotate with 0.
    In SPAD I assigned \e&a90P and \e&a0P respectivaly in device type.
    Now in sap script window I specified below commands...
    /:  PRINT-CONTROL Z90
    =  TEST
    /:  PRINT-CONTROL Z00
    but in the SP01 the text is still printing Horizontally...
    Also Is there any standard print controls which set backgroud to black for specific window.
    and how to use that?
    Please help me to resolve this issue.
    Thanks in advance,
    Shweta

    Hi,
    Occassionally, when you make frequent changes to your SAPScript, the system can get out of sync.
    When you view the form, the old data get display without your changes. 
    This can be fixed by deleting the SAPScript LOAD with program RSTXDELL. 
    Hope it helps.
    Reward if helpful.
    Regards,
    Sipra

  • How to attach print program and sap script for F150 transaction

    How to attach print program and Z sap script for F150 transaction

    Hi,
    you can find the customization for dunning in transaction SPRO under this path: Financial Accounting->Accounts Receivable and Accaounts Payable->Business Transactions->Dunning.
    Kostas

Maybe you are looking for

  • How do I save an image when there is a link attached?

    At times I run across an image that I want to "save" but it has a link attached to it, usually a link to the site's home page. When the link is there I am not given an option to save the image, just options relating to the link. How can I save such a

  • Break signal in Terminal

    Hi Everyone: How do i send break signal in Terminal 2.0.2? H/W Specs: Late Macbook 2007 s/w: 10.5.8 All the console applications have a command like this. Does Terminal also has one. i did some research and found it used to be on earlier ones.

  • Downgraded to iTunes 11.1.3.8, and when attempting to launch the application, iTunes stops responding.

    Here is the report that comes along with the issue: Problem signature:   Problem Event Name:          APPCRASH   Application Name:          iTunes.exe   Application Version:          11.1.3.8   Application Timestamp:          5274a87d   Fault Module

  • XI PCK on XP Prof. SP2 anyone

    HI, I would like to know if there is anybody out ther who has managed to install and run XI PCK on a Windows XP Professional with XP SP2 ? Even if you have failed to install XI PCK I would like to know. Just reply to my post here. THanks !!! Best Reg

  • How to create the deployment descriptor with the sun application server

    I have packaged my .war and ejb-jar files. I go to autodeploy and it says i need a deployment descriptor?