How to print vertical lines for line items?

hi experts,
can any one tell me how to print vertical lines for line items in ascript?
ive tried using sy-vline but its printing jus one line each for each item .i want it in columns ?if there are any control commands plz let me know how to print?
thanks &regards
narendar

hi narendar,
Welcome to SDN.
 u can go for box command.
Use the box command with zero width for vertical lines.
Position the line by x position and y postion.
syntax :
BOX <xpos> <ypos>
 <width>
 <height>
 <thickness in twips> twips.
Regards,
Arun.
Reward points if useful.

Similar Messages

Schedule Lines for TATX items

I know that by default, schedule lines are not active for TATX (text) items in sales documents.
I'm also pretty sure that this option is not valid even if you activate it in the IMG.
Can anybody tell me:
1) Is my statement above correct ?
2) If so, why are schedule lines not allowed for TATX items.
3) Is there any way around this limitation ?

Thanks for your input so far. Perhaps you'll be kind enouth to stick with me a little more.
Let me expalin what my user is doing:
In the IMG configuration of our system, schedule lines were activated for TATX item category, however it still does not work as expected.
User enters a quantity of deliverable product on line item 1 with item category of TAN.
User creates a delivery schedule for line item 1 using schedule lines (category CP).
For line item 2, user wants to send "DOCUMENTATION" for each schedule line.
"DOCUMENTATION" exists in our SAP system as a material master, but no stock exists.
User enters a quantity of DOCUMENTATION on line item 2 with item category TATX.
User creates delivery schedule for line item 2. (auto populates sched category CT).
When delivery is created, the first schedule line for both items works fine.
For subsequent deliveries, line item 1 continues to work, but the line item 2, DOCUMENTATION material does not show up.
I suspect that we are trying to use the TATX item category differently than it was intended, and that some other method would be a better fit for making deliveries of non-stocked material.

No control line for line item - error while posting bd to accounting

Hi all,
Billing document showing err "no control line for line item" while posting to accounting doc.Sales document is complete no in completion logs.
Previous errr: g/l missing for line item" in order incompletion after maintaining company code for customer, then refresh the g/l missing for line item is no more logs and showing the error "no control line for line item" while posting bd to accts.
Please help
Regards
anush

Hello Anush,
if the company data of the payer was not created when the sales order has been created, then the system could not create the correct records in table VBREVK. Once the company data has been maintained the VBREVK records could be corrected by re-saving the sales, but only if no billing document exists.
In your case you already created the billing document.
Please try these step:
1. reverse billing document
2. run VA02 add a blank char to PO number, save
3. create new billing document
Best regards,
Ivano.

Multiple tax lines for same item

Hi,
Is it possible to have multiple tax lines for same item in an invoice in AR.
Business Need - A few items have multiple tax applicable ( e.g. VAT, Service tax, etc ). And for regulatory purpose customer wants to show each tax separately.
please Advise.
thanks,
K

Hi Hikumar,
With tax groups you have what is called compound taxes.
A tax group is consisted of more than one tax codes and these tax codes may be related or not to each other,you can also specify the precedence of the tax codes in a tax group.
On the Invoice or order item line, the tax group code is entered and the tax engine calculates the tax for each tax code that belongs to the tax group.
If the user wants to see the taxes of this line he will see detailed the tax amounts and rates of each tax code that belong to this group.
In my case i have used a tax group with 3 tax codes with the structure:
Item line amount 1000
1)The first line is a specific sales tax(12%) with taxable basis the amount of the item line=1000*12%=120
2)The second line is a VAT(23%) tax with taxable basis the amount calculated from the first tax of the group=120*23%=27,6
3) The third line is a VAT(23%) tax with taxable basis the amount of the item line=1000*23%=230
For each item line that has the above tax group, the system creates three seperate tax lines
Your case does not seem so complicate as mine.
You can find more information on the AR user guide and the Oracle receivables tax manual.
On which Ebs version are you working on?
If you sent me more detailed you requirement i can quide you on the way to implement it and test it.
I hope this helps.
Regards
Olga

How to print Vertical barcode in SAP script

I want to print barcode related items in SAP script . can you plz tell me any one
1.How to print vertical barcode in SAP script ?
2.How to print vertical text in SAP script ?

1.
Create the character format in se71, in that select standard barcode. like
Char.format: C1 Description: Barcode
Barcode: BC_CD39 save the character format.
you can select from the list.
in the form coding, can you use barcode like
<C1> program variablr <>.
<C1> &itab-matnr <>. "--->like this
Then it shows the barcode in output.
check this.
2. for vertical text ..
if this is a window text then its possible but
like
S
H
I
P
T
O
This is possible in giving the window name but in the layout i never tried this.
If u can tell the scenario(with data reference) then may be i can try but not sure that this will give me hit.
regards,
vijay.

How to print multiple footers for each page in RTF template xml report.

Hi,
How to print multiple footers for each page in RTF template xml report.
i am able to print ( two sets ) ...
up to last page ( one template ) and for last page ( another template).
i want to change the footer information based on the group value printed in the report ( it might be 5 to 6) In every report run.. can you please check and let me know do we have any feasibility to achieve this.
Thanks in advance.
Regards,
KAP.

You can remove all other logic, like last page only contents (start@last-page:body), etc and section breaks if any you have inserted manually.
Just have for-each@section logic.
It would be difficult for me to guess what you have done without looking at your RTF or describing here.

How to print claim code for envy 5530 without connecting to internet?

how to print claim code for hp envy 5530 without connecting to internet. We do not have wireless internet and we are trying to set up the eprint app for our samsun android phones and ipad. We need to print off the claim code from the printer but it seems we need to have internet for that. is there any way around that?
Thanks

Hi,
You have to, without connecting to the internet, the claim code (if you can get one) is useless.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Adobe Revel? I have forgotten: the URL; my username and password. How do I ask Adobe for these items? Thanking your reply !!!

Adobe Revel? I have forgotten: the URL; my username and password. How do I ask Adobe for these items? Thanking your reply !!!
[email protected]

Dave,
No worries, this link will help you with your issues. You do have a revel account with that email, so resetting your password should be all you need to do. Just click on the "I forgot my password" link on the web page listed below:
http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
Once you reset your password, you should be able to login to revel at adoberevel.com on a browser or from one of our apps on mac, ios, win8, or android.
Pattie

How to remove leading zeros for an item number within quickviewer

how to remove leading zeros for an item number within quickviewer. Pls help

ask your abap guy to do it. not portal guys business.

How to print double sided for SAP without exporting

Hi Friends,
Could you explain me that how to print double sided for SAP without exporting? Thanx.

Hi,
As per your query this is printer facility not to SAP. You have to define your printer in double printing by default and get all the printout both side from any software like SAP,Excel,Word etc.
Anil

How can i decide candidates for line item dimension?

1Q): we have many infocubes out of all these infocubes, i have to decide which infocubes are the candidates for lineitem dimension? How to do it? Please tell me the technical specs how to do the analysis to find out the candidates for line item dimension?
2Q): if i have the small dimension can i combine all these dimension in to one dimension? what is the benefit of doing this? how to find out which dimensions are small?
Pizzaman i like to hear from you on this topic. Thanks to SDN Community. i appreciate your help. Again Thank you.

The process of figuring out what you might want to create as a line item dimension can vary a bit, it can depend a lot on your exisitng level of domain expertise (how well do you know the data in question). If you are familiar with the data, I would recommend you just take an initial guess at what you believe could be line item dimensions. If you are not familiar witht the data, you might want to examine the source more to understand the cardinality of different characteristics and identify any relationships between characteristics.
I really encourage people to just go ahead and model it and load some data and review, rather than agonizing over developing the theoretically perfect model on paper before they start. You learn a lot more that way.
Any of the SAP rules of thumb, are just that, general rules, not a pronouncement from God. There are always extenuating or unique circumstances that might warrant disregarding the rule, e.g. if the InfoCube will never become very large, maybe some of the concerns just are not worth your effort.
With every release of the Oracle (and the other DBs too)Oracle keeps getting better at data warehousing and star schemas. Oracle 10i is supposed to have made handling bitmap indices much more efficient, which is on of the factors influencing the decision to create a line item dimension.
There are other threads on SDN on line item dims that provide more technical detail and can help answer you first question
As far as 2Q - generally, it's better to have several small dimensions than one larger dimension. But having said that, combining a few very small dimensions into another slightly larger (but still small) dimension is a good idea. It keeps the number of table joins down which will improve query performance. You would do this with characterisitcs that have very few values, e.g. yes/no indicators.
e.g.
You have 8 characteristics that all of which have only two values. You put them in one dimension, and the max size of the dimension table is still only 2x2x2x2x2x2x2x2 or 256 rows. If you had these characteristics in other much larger dimensions, it's not hard to see it causing those dimensions to double, perhaps creating hundreds of thousands of dimension table rows to be created.
For more - read <a href="http://www.kimballgroup.com/html/designtipsPDF/DesignTips2003/KimballDT48DeClutter.pdf">Ralph Kimball Design Tip 48 - Junk Dimensions</a>

How to mention posting keys for line items in IDOCS for fb01 posting

Hi all ,
I am using IDOCS for fb01 posting with posting keys 15 and posting keys 40 for line items .The data is in legacy file . I am using IDOC ACC_GL_POSTING_01 for posting . Is there any way that I can mention the posting keys in the segment parameters of the IDOC.If there is anyone who have done fb01 posting with IDOCS,please help me with the code .Please treat the question as urgent .
Thanks in advance

Hi Arshad,
There is no fecility to enter Posting keys explicitly.. It is determined automaticall by the Credit/Debit amounts u enter in GL data in the segments E1BPACGL08 and E1BPACCR08 and also it depends on the Customer and Vendor no.
Sreedhar

Deletion and creation of Schedule line for Line Item

Hi BW Experts,
In P.S.A. when i have checked for first schedule line 001 reqdelqty is 50 , after deleting 001 and after creation of second schedule line in R/3 there are two records transferred from R/3 for schedule line 002 first with reversal indicator 'X' and delivery quantity -50 and next record with Reversal Indicator blank with value 50. which in turn results Reqdelqty zero.
Reason of wrong data in BW: -
Schedule line category for an item is being deleted forcefully. R3 doesnt allow deletion of a schedule line category if delivery is already created. Here user is creating one same schedule line and then he deletes the order quantity from earlier one. This forces system to pick up schedule line 2 in the document flow
· User shouldnt delete schedule line.

Hello Ganesh,
Schedule line number sequence will not be in control of the user.
once delivery for a schedule line is completed, no way you can delete the schedule line (except renumbering case). This is general SAP logic relates to schedule lines.
Let me know how they are deleting the schedule lines even though delivery is completed.
Now coming to Data load problem in BI.
When you delete schedule line 001, the generated record should be with schedule line 001 with Reversal Indicator as R and delivery quantity -50.
And for new schedule line 002, reversal indicator as blank and delivery quantity 50
Regards,
Nandakumar.A

When I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines

when I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines

Hi Vickey, S,
Sorry for the delay in response. Is it happening with all the files?
Also, please write the steps you are taking to type in the document.
You might try uninstalling and re installing the Reader in case it is happening with all the files.
URL to install the Adobe Reader is Adobe - Adobe Reader download - All versions
Thanks,
Vikrantt Singh

Tax break up in line by line for each item in the repetitive area

Dear SAP PLD Experts
I am facing a problem for generating excise invoice in pld with tax break for each line item .
for eg : i have 5 line item in the invoice.
so , i want to show the tax break up for each line item seperately in column wise .
slNo----Item CodeQtyPriceCenvat E.Cess---- H.E.Cess-- Vat--
Total
1-- A 5 -1000 96.401.920.96 40.00---    line total
2
3
4
5
But when i am showing the Tax amount from Sales tax authorities table in repetitive area, its showing 25 line numers instead of 5 line. and tax amounts is showing line by line.
Can any body help me to sort out this issue.
Thanks
Regards

Dear,
Add the UDF's on the marketing document you want the tax break up.
Apply FMS using below queries and call these UDF's on your PLD.
FOR BED
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount =$[$38.21.Number]
SELECT    @Rate=STA1.Rate
FROM         OSTC INNER JOIN
                      STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
                      STA1 ON STC1.STACode = STA1.StaCode Where   OSTC.Code=$[$38.160.0] And STA1.SttType='9' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For Cess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT    @Rate=STA1.Rate
FROM         OSTC INNER JOIN
                      STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
                      STA1 ON STC1.STACode = STA1.StaCode Where   OSTC.Code=$[$38.160.0] And STA1.SttType='8' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
For HCess
DECLARE @Amount as Numeric(19,2)
DECLARE @Rate as Numeric(19,0)
DECLARE @TAmount as Numeric(19,2)
set @TAmount = $[$38.U_BED.Number]
SELECT    @Rate=STA1.Rate
FROM         OSTC INNER JOIN
                      STC1 ON OSTC.Code = STC1.STCCode INNER JOIN
                      STA1 ON STC1.STACode = STA1.StaCode Where   OSTC.Code=$[$38.160.0] And STA1.SttType='10' order by STA1.EfctDate desc
set @Amount=(@TAmount * @Rate)/100
Select @Amount
This will help you.
regards,
Neetu

How to print vertical lines for line items?

Similar Messages

Maybe you are looking for