How to print via BT from Satellite A200 laptop.

My laptop is Satellite A200,model no. PSAF0A-0EV019.
I am trying to set up a canon mp510 printer fitted with a BT(bluetooth) dongle with my A200 laptop so that I can print wirelessly.
I assumed that A200 has an inbuilt BT module as I open the Toshiba assist, there BT icons in the folder. When I clicked on the BT setting icon, a dropdown window showing installing the BT driver and a bar chart on it. It would not proceed any further.
What driver do I need and where to get it ?
Can BT and WiFi work together ? eg surfing the net via a wireless router and print the web content using BT enabled printer.
Anyone has suggestions how to enable BT in a A200 laptop ? Please help.

Yes, you can use bluetooth and WLAN at the same time. It's not a problem at all with our new notebook.
In order to get your bluetooth up and running read the following website:
http://aps2.toshiba-tro.de/kb0/TSB7201PI000LR01.htm.
You can use the program "Bluetooth Settings" afterwards to setup your printer.

Similar Messages

  • How to print double sided from my Mac to my Canon MG6350

    I have looked up everywhere on the internet and youtube of how to print double sided from my Mac Book Pro. I am using OSX 10.8.5.
    All of the dicussions I have looked up before have told me to go to System Preferences>Print & Scan>Options & Supplies> Driver and then tick the little box that comes up and it will allow you to print double sided. I have tried doing this but THERE IS NO DRIVER TAB!!!
    I was just wondering if there was a solution to this as I can print double sided from my other appliences, like the PC and iPad, it is just my Mac Book Pro that doesn't work.
    It has become a big problem for me as I'm studying at college and I need to print things double sided quite regularly. I really need this to work.

    The print dialog has several drop-down menus, one of which initially shows the name of the application you're printing from. If the printer supports duplex, you can choose
    Duplex Printing & Margin
    from that menu. You should then see a checkbox marked
    Automatic Duplex Printing

  • How can print a report from form 6i,  when I press a button?

    hi Friends,
    How can print a report from form 6i, when I press a button?
    When i press a button from Form 6i, the report should print through printer.
    I have done it by using report parameter DESTYPE Printer but problem is that when I press a button printer dialogue box appear and then I give command Print to printer, I don’t want to show Printer dialogue box.
    I want when I press a button form Forms 6i , printer will print my report directly.
    Please send me the solution of this problem.
    Best regards,
    Shahzad

    Hi
    If You are using Client server application then to passing to Add all Print Parameter in the Host Command.
    Means Print command in unix to Host(lp.............) and Other Parameter to file name of the report to print.
    If You not Use Client Server Application the Also Passing a Host Command in Button-Pressed Event and Run.

  • How to print a grid from windows phone 8.1 application

    Hello ,
    I want to print a grid from a windows phone application.
    For tablet I can print using this namespace:
    using Windows.Graphics.Printing;
    using Windows.UI.Xaml.Printing;
    But they are only for Tablet.
    Please suggest a solution of printing from windows 8.1 phone application.
    Thanks

    Hi waqar.haider.confiz,
    >>How to print a grid from windows phone 8.1 application                                 
    As far as I known, in Windows Phone 8.1 app it does not have such API for us to print a grid. I will recommand you submit this feature request on this
    UserVoice forum.
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to print in colour from a MAC

    Hi,
    I am having trouble figuring out how to print in colour from my computer. It is only printing in black and white despite the ink being full and copying in color. Their is obviously a setting I can't fiqure out.
    Thanks 

    Hi @kerrianne 
    It is possible  preset was created at one time and now the printer driver is set to print in grayscale. Let's reset the printing system and add the printer again. Please use the instructions below if you are unsure how to perform these steps;
    Reset Printing System
    Click the Apple icon (   ), and then click System Preferences.
    In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    When you add the printer, please ensure you are using the HP driver.
    Select Add other Printer or Scanner                                                       
    Select the printer you are adding and next to 'Use' you can the printer driver 
    I look forward to hearing from you
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

    I am trying to connect to an HP 4550N printer via ethernet from an iMac with OSX 10.6 but cannot print.

    never assume or assume their advice works out of the box
    install the drivers that they sate is the latests on their site!
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=dk &prodNameId=21861&prodTypeId=18972&prodSeriesId=27901&swLang=8&taskId=135&swEnvO ID=4082

  • How do i access icloud from my sony laptop. ive taken photos from my 5s iphone and dont know how to send to icloud then see them from laptop

    How do I access icloud from my sony laptop. do my photos go automatically to the cloud from my 5S iphone?

    Remote Wipe should solve the problem.

  • How do I move pse9 from my old laptop to a new one?

        How do I move pse9 from my old laptop to a new one?

    I have my original disk, but I believe I need to de-ctivate the existing copy before installing on the new computer.

  • How can i transfer movies from my windows laptop to ipad 3

    how can i transfer movies from my windows laptop to ipad 3

    Import them into iTunes then sync them to your iPad

  • I have an apple acct. and an itune acct., how do i access them from my ACER laptop ? tks.  jeff

    i have an apple acct. and itune acct.  how do i access them from my ACER laptop ? tks. jeff

    Movies are not stored in iCloud. However, they may be available for re-download through iTunes in the cloud if they were purchased and iTunes in the cloud is available in your country. Same applies to music.
    See
    HT2519 Download past purchases
    http://support.apple.com/kb/ht2519

  • Upload PDF directly to printer via Citrix from off-site computers

    Is it possible to upload PDF documents directly to the newer HP printers, especially the business printers and copiers (MFDs)?  We have HIPAA-containing data that home-based users must print at work, and therefore cannot be sent via the cloud.
    Our current printer vendor supports uploading PDFs directly, which our users are using.  The workflow involves printing via PDFCreator, then opening the web interface print tab of the device they are printing to and uploading, via a browse button, the PDF document.  The connection is handled through our Citrix remote access servers, everything is encrypted, and all data stays out of the cloud.
    Because HP's ePrint is in the cloud, we cannot submit HIPAA-containing data via that route.
    If no current HP products have that capability, can it be added?  I would think a firmware update to have an upload option would be very doable.  It appears that the ability to print PDFs is already present via ePrint--this would only be another way to submit a print job.
    Our current printer vendor's device functionality includes being able to upload and print other print-ready formats, including .PCL and .PS files, but we aren't using that capability currently.  It would be nice to be able to upload .DOC/.DOCX formats directly.

    Hey SPS64,
    Thank you for participating in the HP Consumer Support Forums!  The steps you desire are not going to be found on Consumer grade printers, but may be able to be found on some of the Enterprise level printers from HP.  I would advise posting this question on the Enterprise printing boards where there are many experts who would be willing to assist with your question.
    http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
    Best of luck,
    Jason
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • How to print BIP reports from Oracle Forms?

    Hi all,
    I have a question in regards to printing BIP reports from Oracle Forms... We are aiming for a server installation of BIP with integration to Oracle Forms using SSO to handle security. We use Forms built-in web.show_document to render and view the report in PDF/Excel etc... We would like to by pass the viewing and print some of these reports directly to the printer.
    Any idea/suggestions how we can go about this?
    Thanks in advance for your time.
    Yahya

    Yahya,
    via HTTP it's not possible to send a report directly to the printer. You had to go via the Scheduler, which is able to do that. With the WebService API you can call a report with the Scheduler and Execute Immediate.
    Regards
    Rainer

  • No printing via Bonjour from Windows

    Windows PCs can't print via my Tiger server using Bonjour. The printers shared by the server are visible in the Bonjour add new printer wizard. When printing the jobs are sent from the Windows PCs without error messages. But nothing gets printed.
    The same queues work fine from Macs.
    Looked for the print server logs, but the only logs for the queues are for Appletalk, and they are empty. The server is set not to share any of the print queues via Appletalk.
    Tried printing via SMB, but no luck there either.
    Printing from Windows directly to the printers using Bonjour works.
    Tested turning of the server firewall, but this did not help.
    Any ideas waht could be wrong?

    Since you can print directly to them from Windows via Bonjour I am wondering how you are sharing the printer from the server. My guess is that it is via 'Print & Fax' of System Preferences. If the printers support LPR, then I would suggest you configure the server printers this way. Go to Server Admin > Print > Settings and enable LPR and 'Show name in Bonjour'. This will give you more control over the printers.
    If you have shared the printers this way and since SMB also fails, then I would ensure you haven't enabled print quotas for the queue. This can make jobs vanish.
    Even if you are using 'Print & Fax' to share the printer, you still should be able to see the cups error log. In the Server Admin, select Print, then select Logs and then for the Show menu select error log. This is the same log for both methods of shared printers and this should give some clues as to why the Windows spool files are not printing.

  • Please help : How to print a matrix from the console...

    Hi..
    Please help:
    How to print a matrix on the console , but i want to take all the input from the console.. like...
    if the matrix is of size...
    mxn
    where
    m : row
    n : column
    and the all the elements of the matrix from the console it self... .
    Please help...

    Thanks...
    I am able to print the elements of the array but i am not able to assign those values to the array ....
    How to do that...
    I just did a little change in my code...
    import java.util.Scanner;
    public class CreatingAMatrix {
        public static void main(String[] args) {
         // TODO Auto-generated method stub
         System.out.print("Enter the number of rows: ");
         Scanner scanner1 = new Scanner(System.in);
         int m = scanner1.nextInt();
         System.out.print("Enter the number of coulmns:");
         Scanner scanner2 = new Scanner(System.in);
         int n = scanner2.nextInt();
         System.out.println("The size of the matrix is : " +m+" x "+n );
         int[][] a = new int[100][100];
         for(int i=0;i<=m;i++)
             for(int j =0; j <= n; j++)
              Scanner scanner3 = new Scanner(System.in);
              int o = scanner3.nextInt();
             System.out.println();
         for(int i=0;i<=m;i++)
             for(int j =0; j <= n; j++)
              System.out.print(a[i][j] + "\t");
             System.out.println();
    }I am getting an output as this
    output:
    Enter the number of rows: 2
    Enter the number of coulmns:1
    The size of the matrix is : 2 x 1
    1
    2
    1
    2
    3
    5
    0     0     
    0     0     
    0     0     
    how should i assig those input values to my array..
    Please help

  • How to print a receipt from the iTunes store, I did not receive an email.

    How can I print a receipt from the iTunes store when I did not receive an email.

    The following may help: iTunes Store: See your purchase history and web order numbers

Maybe you are looking for

  • Network Connection Refused - Help

    When I try to connect to the music store I receive an error message that says "iTunes could not connect to the music store. The network connection was refused." It further suggests that I check my network settings to see if they are active and correc

  • Edit Photo dialog box will not display

    When I select edit in CS5 my file goes straight to CS5 and my edit in the dialog box will not display. I have no way to oprn with a copy or etc with out the  edit dialalog box. Iam using LR 4 latest version I must have changed some thing no realizing

  • Transformation from multiple elements to multiple instances of same element

    I have to do a transformation where some elements in the source side has to be mapped into multiple instances of an element which has name-value pair elements. For example source has element1 element2 element3 element4 Target has elementspecgroup (0-

  • Exporting Final Cut Chapter Points to Encore

    Blu-ray question. I'm creating a bluray in Encore cause Apple hasn't gotten their act together yet. What is the best way to get your chapter points from Final Cut to Encore? Or do you export as a self contained movie, import the file into Encore then

  • Star rating function not working

    I have Adobe Bridge CS6 on Windows. Some of my images in Bridge don't allow me to give a star rating and some do. What is the difference? I would like to use the star rating function an all of my images. What should I do?