How to print with out preview?

Hello,
How to print with out preview the report, I want to send the report direct to a printer with out a preview it.

I believe with Crystal Enterprise (or BOE), when you schedule a report you can use the Print Settings to tell CE to print the report immediately (although I have never done this).
HTH,
Carl

Similar Messages

How to print with out border

I am trying to print a file in works (see pictures) and it keeps cutting off the sides when i print what do i need to change for it to be able to print the whole page and not cut off the sides and top?
Thank you

Printing with no margins in mostly a printer setting.
As there is no such feature in my printer, I don't know if it's a setting ruled thru the menu item named (in French)
Paramètres d'impression…
or if it's ruled thru the menu item named (in French) Imprimer.
When the setting is done, define the margins to zero in the Inspector of Documents.
In Numbers, it's easier : there is a box to check to use the printer's smaller margins.
Yvan KOENIG (VALLAURIS, France) dimanche 1 mai 2011 18:47:35
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

HT2534 how new id with out cridet card pls let me know

Hi sir,madam,
pls i need help how apple id with out credit card i have apple id but not spt Tiunes & App Store pls let me know pls i wirting for yor repls.........
Thanks.....
<Email Edited by Host>

Select None for payment method.
Instructions here > iTunes Store: Changing account information

How to printe with cardinal number? or ordinal number?

As Subject, how to print with numbers on the bottom of each page? or on the bottom right/ bottom left? or on top of page? top right/top left?
I am poor using Pages, still learning.

Click in the Header or Footer:
+Menu > Insert > Auto Page Numbers…+
Peter

Need to print with out comma

Hi all,
My table is loaded like this 123,678 .00 .I need to extract the data without comma like this 1234678.00
can any one help me to resolve this issue?
Thanks in advance.

You can do this.
data: str(15) type c value '123,678.00'.
translate str using ', '.
condense str no-gaps.
ABAP related questions should be posted in the ABAP forum.
As I see you have done.
need to print with out comma
Regards,
Rich Heilman
Message was edited by: Rich Heilman

If full load is there in infopackage if u want delta how to load with out d

if full load is there in infopackage if u want delta how to load with out deleteinng request under same infopackage

Hi ,
One point i would like to make you clear,using full load Ip you can't load delta
for which you need to create one more IP
And now to load delta,you need to check some prerequisites:
http://help.sap.com/saphelp_nw04s/helpdata/en/44/97437799ee70dbe10000000a1553f6/frameset.htm
chek the abobe link for step by step instructions
Cheers,
Swapna.G

How to print with a wireless printer with airport extreme

how to print with a wireless printer with airport extreme

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

How to print with "Scale: 100%" by default from Preview

The print dialogue in Preview is set by default to "Scale to Fit".
I never need this, I always need "Scale: 100%".
It's annoying to change all the time I have to print a PDF from Preview the setting!
I tried to save the print setting, but it does not work.
So. Is there a way to set the print dialogue by default to "Scale: 100%" ?
Mayby with a Terminal command?

AFAICT, only for PDF files. If you want to report this issue to Apple's engineering, send a bug report or an enhancement request via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report or enhancement request. The nice thing with this procedure is that you get a response and a follow-up number; thus, starting a dialog with engineering.

Need instruction on how to print with HP Officejet 6210

this is with a powerbook G4 1.5, OS 10.4.5, and an HP Officejet 6210 with newest drivers (released 8/06).
I've used an HP PSC950 for years, connected to my AEBS with USB, using Felix's instructions for setting up the foomatic/hpijs driver, always worked great. Once in a while it would go out on me, rarely, and i'd reinstall the driver and it would work again.
Several months ago, i was trying to print something on Mapquest and i gave too many commands at once and the system got confused and ever since then, it won't print wirelessly, reinstalling the driver didnt' help.
Also, i'm not sure i'm adapting Felix's instructions to the new OS which doesn't exactly match the instructions.
Anyway, haven't had wireless printing in months. Finally tonight, i went out and got a new printer, the HP Officejet 6210, first checking and finding it on the compatability list, both Felix's list and HP's list.
I set it up, it works fine with direct computer/printer USB connection.
I just don't know how to set up the Mac to print with the 6210. I have the 6210 connected to the AEBS with USB cable. I dont know what else to do.
I went to an HP page where it gives step by step instructions for USB to Airport instructions.
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00592751&produc t=421991&dlc=en&lang=en
Step one and two are OK. Step 3 says:
"Turn on the printer and verify that the wireless mode is enabled. If you need more information on how to enable the wireless mode, see the User Manual which shipped with the printer."
I have no clue about how to verify that the wireless mode is enabled. In the index of the 6210 User Manual there is not a word about 'wireless.' The word 'network' isn't in there either. Under 'Connection' it doesn't mention anything about wireless printing. So i'm not really able to do this step.
I tried to do the other steps but if they are talking about the Airport pull down menu in Step 4, there is no printer listed there. I tried to follow step 5 but it leads nowhere.
Is there some way to set up the Mac the way i set it up for the foomatic/hpijs driver for the PSC 950, so that i can select 10.0.1.1 in the printer menu and print? I tried going into the set up utility and chose Add and chose internet IPP printing and wanted to choose the HP 6210 driver but it wasn't available. There was an HP 6200 series foomatic/hpijs driver--what does that mean? Am i supposed to use that? I chose that and tried to print from 10.0.1.1 but in Print Jobs it just says "10.0.1.1 is busy, will retry in 30 seconds." In other words, it doesn't work. This is what happened when i tried to get the PSC 950 working again too.
Anyway, the HP instructions don't have anything to do with any of this. They just say to make sure the wireless mode is on and then go to Safari and choose Bonjour and various other things that when i try them, they aren't available as choices.
I know that someone on these forums was able to use Bonjour to print with their laptop so it must be possible (with Windows however).
http://discussions.apple.com/thread.jspa?messageID=1494092&#1494092
Plus HP says they tested the connection with Mac OS and it works. So it must just be a matter of some knowledge i am lacking that would get it working.
If the printer won't work, i have to return it within 14 days so I need to get on it and try to determine if it will work.
Could there be a problem with my AEBS, which would explain why i was never able to get my PSC950 to print wirelessly again after that crash on Mapquest?
Do i need to reinstall the OS?
I seriously don't think this printer has a wireless mode, otherwise it would be mentioned in the manual. I ran through the menu, tools and preferences (on the printer)--nothing about wireless mode. But why should it need a wireless mode if it's connected by USB cable to the AEBS? Isn't this just a matter of setting up the Mac software to print with Airport?

i have duplicate posts because when i tried to post the comments on 'question answered', i got a red error message saying i had violated no posting within 30 seconds of the last post. I carefully counted out 30 seconds and then waited some more, but i got the same error when i tried to post it again. so then i clicked on the Reload or Refresh browser button, "are you sure you want to send this page again?" yes. then i tried sending the answer comments again and it posted, a long with two duplicates.
What ever happened to the Edit and Delete post buttons that used to be available on this site, for a short time after posting?

How to print PDF in Preview

Hi
This is probably glaringly obvious but I can't work out how to print pages 1-4 of a PDF onto 1 sheet of paper using Preview Print setup. i get 4 copies of the same page ..any suggestions?

solved it myself.. under orientation ..preview - Layout- pages per sheet

How to Print with an iPad, iPhone, or iPod touch

If you have an ePrint enabled printer, you can use..
ePrint
AirPrint
ePrint mobile app
If you have a non ePrint enabled printer, you can use
ePrint mobile app
Google Cloud Print
Check out the link below for further details
http://www8.hp.com/ie/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Hi there, I'll try my best to answer your questions:
Marvcohen2002 wrote:
1) What do I need to do to enable the HP 6310xi to print wirlessly from my home or work wireless networks? Will connecting a router to the Ethernet port enable wireless printing, for example? Or, is there some other solution? If so, exactly what is it?
If you have the printer already setup as a USB connection, remove the USB cable at this point and uninstall the printer software from the computer. Connect the printer to your wireless router with an ethernet cable and reinstall the software for the appropriate operating system from the driver download page . During the reinstallation be sure to select Through the network as the connection type when prompted. If you want to print from multiple computers on your network you'll need to install the driver selecting Through the network on each of them. While the printer does not have wireless capability built in, setting up the printer this way will enable you to print from wireless enabled computers on the same network as the printer. Page 29 of the printer's user guide provides detailed instructions for setting up the printer as a network device.
2) I downloaded the HP Cloud printing app for the iPad Air from the Apple Apps store. The idea is to try to print from the iPad Air to the HP 6310xi via a USB port, for example, eventually wirelessly if at all possible (see #1 above). However, the app does not work at all. The Apple people say it is supposed to work, but have no solutions, probably due to lack of technical expertise.
You cannot print from a mobile device (smartphone, tablet) to the printer via a USB port. To print from a mobile device you will need a WiFi capable printer. If you want to be able to print remotely from a mobile device to a printer i.e. when the device and printer are not connected to the same WiFi network, you will need a web enabled wireless printer. This link is to the current range of HP wireless printers, the majority of which are also web enabled (the ePrint logo will indicate this).
Hope this information is useful to you.
Best
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

How to print with a dot matrix printer?

can anyone tell me how to print a document with a dot-matrix printer with java?

try this...
String printerUNC = "lpt1:";
String report = "This is the text to print"
try{
FileWriter fw = new FileWriter(printerUNC);
PrintWriter pw = new PrintWriter(fw);
pw.println(report);//"This is the test report");
pw.flush();
fw.close();
}catch(Exception e){
System.out.println("Error during print");
System.out.println(e);

How to print with HP Deskjet 2510 with Imac G5 on Tiger ?

Hi Folks
I desperately need some helping hand....
Today my old trusty printer died (HP 1510 print/scan/ copy) and I ran to buy another one because I need to finish some tax paperwork.
In a mad hurry, I didn't pay any attention to tech specs and I went home with brand new HP DeskJet 2510 All In One device. But !!! : ((
In my home office I still use Imac G5 with 10.4.11 which is still pretty good comp for office work but I found out that the HP 2510 don't officially support my Imac with Tiger. Only from 10.6 and later.... I know that Imac G5 can't run nothing above 10.5.
So, is there any way to "force" HP 2510 to somehow recognize my Imac G5? In "about my mac" on USB port, the HP 2510 is visible ....
Many thanks in advance.
Cheers,
Sven

So, is there any way to "force" HP 2510 to somehow recognize my Imac G5?
You may be able to get it to print with something like this:
http://gimp-print.sourceforge.net/MacOSX.php
although i do not see taht modle on the "Supported Printers" page. You might look again.
BUT that workabout does not support scanning, only printing.
I think you need to return the printer and look to either Canon or Brother. Brother especially has been better about suporting older Mac OS versions but you'll still need to get a model number and search the maker's site BEFORE buying to see if they show older drivers for download.

How to print with inverse printing on HP8150

Hi, we have an HP 8150 lazerjet and require the ability to print a white number within a black square. The printer is connected to an HP9000 running HP-UX.
The final image would have to be approximately 3/4" square.
Control of the printer has been accomplished by using PCL control commands/sequences.
Any assistance would be appreciated.
thanks
This question was solved.
View Solution.

This pseudo-PCL (with analysis) shows you how to print:
White text on black and white backgounds
Shaded fill text on black and white backgrounds
Black text on shaded and white backgrounds
<Esc>&l0O Orientation: Portrait
<Esc>&u600D Unit-of-Measure (600 PCL units per inch)
<Esc>&a0L Left Margin (column 0)
<Esc>&l0E Top Margin (0 lines)
<Esc>(19U Primary Font: Symbol Set (19U = Windows Latin 1 (CP 1252))
<Esc>(s1p Primary Font: Spacing: Proportional
40v Primary Font: Height (40 points)
0s Primary Font: Style (Upright, solid)
0b Primary Font: Stroke Weight: Medium
16602T Primary Font: Typeface (16602 = Arial)
<Esc>*p600x Cursor Position Horizontal (600 PCL units)
600Y Cursor Position Vertical (600 PCL units)
<Esc>*v0o Pattern Transparency Mode: Transparent
0T Select Current Pattern: Solid Black
<Esc>*c1800a Rectangle Size Horizontal (1800 PCL units)
200b Rectangle Size Vertical (200 PCL units)
0P Fill Rectangular Area: Solid Area
<Esc>*p600x Cursor Position Horizontal (600 PCL units)
800Y Cursor Position Vertical (800 PCL units)
<Esc>*v1o Pattern Transparency Mode: Opaque
1T Select Current Pattern: Solid White
White text
<Esc>*p600x Cursor Position Horizontal (600 PCL units)
1200Y Cursor Position Vertical (1200 PCL units)
<Esc>*v0o Pattern Transparency Mode: Transparent
0T Select Current Pattern: Solid Black
<Esc>*c1800a Rectangle Size Horizontal (1800 PCL units)
200b Rectangle Size Vertical (200 PCL units)
0P Fill Rectangular Area: Solid Area
<Esc>*p600x Cursor Position Horizontal (600 PCL units)
1400Y Cursor Position Vertical (1400 PCL units)
<Esc>*c20G Assign Pattern ID (identifier = 20)
<Esc>*v1o Pattern Transparency Mode: Opaque
2T Select Current Pattern: Shading
Patterned text
<Esc>*p600x Cursor Position Horizontal (600 PCL units)
1800Y Cursor Position Vertical (1800 PCL units)
<Esc>*v0o Pattern Transparency Mode: Transparent
0T Select Current Pattern: Solid Black
<Esc>*c20G Assign Pattern ID (identifier = 20)
<Esc>*c1800a Rectangle Size Horizontal (1800 PCL units)
200b Rectangle Size Vertical (200 PCL units)
2P Fill Rectangular Area: Shading
<Esc>*p600x Cursor Position Horizontal (600 PCL units)
2000Y Cursor Position Vertical (2000 PCL units)
<Esc>*v1o Pattern Transparency Mode: Opaque
0T Select Current Pattern: Solid Black
Black text
<Esc>E Printer Reset

How to print with out preview?

Similar Messages

Maybe you are looking for