How to prioritize the traffic
Hi.
We're running a 3745 router on the edge and a 6506 on the core. We have 2 connections going from the switch to the router, and are not utilizing any dymamic routing. Is there a way for us to priotitize the traffic between the 2 devices for a specific connection?
thanks..
How are the 2 links being utilized at the moment?
Are both links sending/receiving traffic to/from the 6500?
If so, how are you forcing the route to go via both paths? (static routing) ?
You can potentially implement Policy Base Routing (PBR) in the 6500 to match traffic based on a set criteria and set the next hop to be one of the links. You will need to do the same in the 3745 for return traffic.
or
Are you talking about configuring priority queue on both links for egress traffic from the 6500?
Edison.
Similar Messages
-
How ACE classifies the traffic and send it to appropriate Context
Hi ,
Could some one please explain packet clasification in ACE modulue ,example : let us assume thee are three contexts ( context1 , context 2, context3) in ACE module , how the ACE classifies the traffic and send to appropriate CONTEXT if any customer comes and hit the ACE .
Regards
RajHello Raj,
In addition to what Ajay mentioned, yes each virtual address ( VIP) in combination with the port which you configured( if any) will act as unique identifier for the ACE to handle a specific traffic and finally take the load balance decision it needs or any other action which would be required
Another thing which you can take into consideration from the routing perspective is that you configure on the Admin Context the specific vlans allocated to each contexts based on your requirements so for example: you may allocate this vlan10 for context 1 then vlan 20 for context 2 or all of the vlans for context 3
Going back to your original, yes the ACE works this:
Request ----->VIP--->ACE checks which contexts has the VIP in question---->send request to context--->traffic is load balanced between the servers
Jorge -
How to monitor the traffic on network interface card NIC
hello friends
i m dong a network based project
in that i need to calculate the incoming
and outgoing traffic on network interface
Can anyone help me regarding this...
any API that i van use, i know abt JPCAP
but unable to use that in this repect...
Thanks in Advancesorry for any mistake....
i m new to java
Actually using JPCAP we can capture the packets
and process them..may save to file or some thing like that
but how to know the current incoming and outgoing traffic...on NIC
and also how much it is capable of...
can u tell me any good tutorial
i really need to do that
thanks for concern -
ASA5505 how to record the traffic log
Hello, everyone,
I want to analysis the log from asa5505,
I have configured the device to send the log to a syslog server.
but I found the log seems like event log, it's format like below :
6|Nov 11 2010|18:07:33|302014|192.168.2.22|192.168.1.2|Teardown TCP connection 986 for outside:218.30.82.201/80 to inside:192.168.1.2/1764 duration 0:10:01 bytes 619 FIN Timeout
I want to obtain the traffic log, it may contains each connection record information, including send bytes and receive bytes, URL and so on...
but I can't find out how to setup the device to let the asa5505 record the traffic log,
someone can give some tips, thanks in advanced.Hi,
You need to enable the Netflow protocol.
Here are two documents related to Netflow for Cisco ASA:
https://supportforums.cisco.com/docs/DOC-6114
https://supportforums.cisco.com/docs/DOC-6113
Best regards,
Giorgos -
How to get the traffic split up in VPN 3000 Concentrator?
Hi,
Requirement:
I want to parse & analyze the Cisco VPN 3000 Concentrator logs and provide the report for the happenings using the log.
Issue:
I am able to get the traffic split up for Cisco Pix501 thro' it's logs for the VPN connections. But in Cisco3000VPN Concentartor, i am not able to get the traffic details for any PPTP/IPSec connections. It simply provide the overall traffic log when the seeion is closed. For example below is my traffic log,
<189>14014 07/23/2004 19:16:24.640 SEV=4 AUTH/28 RPT=41 192.168.101.41 User [sarav] Group [Base Group] disconnected: Session Type: PPTP Duration: 0:16:37 Bytes xmt: 216 Bytes rcv: 38023 Reason: User Requested
My Question:
Is there any configuration/solution available to get the live traffic[traffic split up] thro' that VPN connection for Cisco3000VPN Concentartor?
Please help me in getting this issue resolved.
Thanks to all helping me to resolve the issue.
Thanks.You get the details from the Pix logs not because of VPN functionality but because the Pix is a stateful device the manages and logs each and every session.
The VPN 3000 is not stateful or session aware. The best you could do is provide packet level logging, but this would generate enormous log files that would need to be statistically analyzed to provide useful information.
Your best options are to run their traffic through a Pix firewall for the session logging, use the first hop router inside the network that can provide Netflow export for analysis, or use a probe to monitor the traffic that can discern the indivdual flows. For the last two, ntop can analyze netflow of mirrored sessions to provide protocol analysis by src/dest IP, top protocols used, etc.
-Shannon -
How to change the Traffic light positioning in ALV?
Hai All,
I am displaying a traffic light field in my ALV Grid. Now i want to display another field in the first position and move the traffic light to second or any other position. COL_POS seems to be not working, is there any chance of doing this?
Best regards,
rama>
newtoAbap wrote:
> Hai All,
>
> I am displaying a traffic light field in my ALV Grid. Now i want to display another field in the first position and move the traffic light to second or any other position. COL_POS seems to be not working, is there any chance of doing this?
>
> Best regards,
> rama
If you are using EXCP_FNAME in the ALV layout to display your traffic lights, it may not be possible to move your light field to any other position..
One possiblity is to define your own field (as icon) in the internal table and assign the Traffic light icon to that field... By this approach, you can position that field in any place in your input structure while generating field catalog or defining your structure
Here is an example with SALV,
http://wiki.sdn.sap.com/wiki/display/Snippets/displayingiconsinalvusingclasscl_salv_table
Example with icons in REUSE FM (can be used in ALV OO) and there should be umpteen examples in SDN also
http://wiki.sdn.sap.com/wiki/display/Snippets/TrafficlightsinALVdisplay -
Does the Ipad2 with 3G comes with a program to control the traffic of data? I mean the amount? Or do you need to get an app? And if so, what app should I take?
Thx,
DavidThx,
I believe with 1GB I will be fine, as I used it once, two years ago with the PC of the Company and only used 600MB in a 4 week period.
I normally only would go and see my mail, and read some website (news, sports) and nothing more, so with one I will be OK. As it is only for during the summerholiday, the rest of the year I have my 20MB line at home with no limitations of bandwidth (:-):-)).
Michael, sorry I am from Spain, so no AT&T here Thx Anyway (also David and Lyssa) -
How to forward the traffic of my router??
Good evening
I have a problem, I hope someone can help me.
I have to forward the traffic of my Cisco Router 877W (ip:10.10.10.1) into a hardware firewall (ip: 10.10.10.50) and I can't do it.
Could you give me some advice??
Thanks for your attention.Hi Marco,
ip route 0.0.0.0 0.0.0.0 10.10.10.50
!-- Static default route pointing to the Firewall.
http://www.cisco.com/warp/public/105/36.html
Regards,
~JG
Please rate helpful posts -
How to prioritize the execution of tables in crystal
Hi,
I have two tables Table.A and Table.B, what I want is to run Table.A first and then followed by Table.B. Is there a way I can achieve this?What is that you are trying to do? I can't think of a reason why you would want "one table to run before the other". You can control the relationship between the 2 tables by:
1) Open the Database Expert
2) Click the Links tab
3) Right click the link between the 2 tables and choose "Link Options..."
4) Select a different join type
Example: Table 1 Left Outer Joined to Table 2 will produce all records from Table 1 and only the records from Table 2 that correspond to Table 1.
Jason -
How to Prioritize the Query Result Using Analytical Functions
hi
Edited by: prakash on May 20, 2013 1:42 AMUse ROW_NUMBER
SQL> select PRVDR_LCTN_X_SPCLTY_SID,PRVDR_LCTN_IID,PRVDR_TYPE_X_SPCLTY_SID,STATUS_CID
2 from
3 (
4 select t.*,
5 row_number() over(partition by PRVDR_TYPE_X_SPCLTY_SID
6 order by STATUS_CID) rn
7 from your_table t
8 )
9 where rn = 1;
PRVDR_LCTN_X_SPCLTY_SID PRVDR_LCTN_IID PRVDR_TYPE_X_SPCLTY_SID STATUS_CID
75292110 10153920 75004770 1
75291888 10153920 75004884 2
75292112 10153920 75004916 1
75292117 10153920 75004974 1 -
How to priorities(QoS) the traffic for DSCP 46 and 34 in cisco 2960s switch
HI,
We are going to implement Microsoft Lyncs 2013 in our network, so how to priorities the traffic for DSCP 46 and 34 in cisco 2960s switch. Kindly replay with detailed QoS commands for enabling QOs in LAN.
Thanks
SujishHi,
Have a look at this config guide for all the details:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/configuration/guide/2960scg/swqos.html
HTH -
How can we prioritize the messages in Adapter engine
Hi Experts,
I want to prioritize the messges in adapter engine, How can i do this?
Thanks in Advance
SrinivasHi,
did you check help.sap.com ?
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/6ffe8effc20eede10000000a155369/content.htm
Regards,
Michal Krawczyk -
MMC how to start the log to see traffic on my dsl channels
I want to see the traffic on my dsl channel in my area, I had read I could change channel if I wanted
I only want to see that, not all things in the event viewer
I don't know what to type in the command line
I read the instruction page which told me nothing on how to do this.
Thanks in advancesome small tools are easier to use, see these two links
https://blogs.manageengine.com/product-blog/netflowanalyzer/2010/02/05/monitoring-a-dsl-connection-with-netflow-and-netflow-analyzer.html
http://www.byteometer.com/thirdlevel/dsl-modem-monitor.html -
How to put up the traffic lights icon in the ALV Grid. OO output
Hi all,
I have a requriement that after all the report execution parts are done, i need to display the posted or unposted document using the Traffic light icon in the report output, i am displaying the report in ALV OO form and i already geta field with a conent X of the document is posted else that field is blank currently.
RegardsSample code here for this.
*& Report Z_50657_ALV_EX2 *
*& Program Name: Test Program for ALV *
* Developer Name: ADCDEV (Rahul Kavuri ) *
* Description: ALV Report to Display Vendor Details *
*& Date:7th April 2006 *
REPORT Z_50657_ALV_EX2
NO STANDARD PAGE HEADING
LINE-COUNT 65(3)
LINE-SIZE 220
MESSAGE-ID ZZ.
* Type Pools *
TYPE-POOLS: SLIS, ICON.
* Tables *
TABLES: VBAK. "Sales Document Data
* Internal Tables *
* TABLE TO HOLD DATA OF SALES DOCUMENT
DATA: BEGIN OF IT_VBAK OCCURS 0,
VBELN LIKE VBAK-VBELN, "Sales Document
VBTYP LIKE VBAK-VBTYP, "SD document category
AUDAT LIKE VBAK-AUDAT, "Document date (date received/sent)
AUGRU LIKE VBAK-AUGRU, "Order reason (reason for the business)
AUART LIKE VBAK-AUART, "Sales Document Type
NETWR LIKE VBAK-NETWR, "Net Sales Order in Doc. Currency
WAERK LIKE VBAK-WAERK, "SD document currency
ICON TYPE ICON-ID, "traffic lights
END OF IT_VBAK.
* Work Areas *
*WORK AREAS DEFINED FOR ALV'S
DATA: WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV, "field catalog
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV, "field catalog ITAB
WA_SORT TYPE SLIS_SORTINFO_ALV, "SORT work area
IT_SORT TYPE SLIS_T_SORTINFO_ALV, "SORT ITAB
LAYOUT TYPE SLIS_LAYOUT_ALV, "LAYOUT
WA_FCODE TYPE SLIS_EXTAB, "FUN CODE
I_FCODE_EXTAB TYPE SLIS_T_EXTAB,
WA_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
* Selection-Screen *
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS: S_VBELN FOR VBAK-VBELN.
PARAMETERS: P_VBTYP LIKE VBAK-VBTYP DEFAULT 'C'.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME.
PARAMETERS: LIST RADIOBUTTON GROUP G1,
GRID RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
* At Selection-Screen *
*VALIDATION
* Start of Selection *
START-OF-SELECTION.
*POPULATION OF DATA INTO INTERNAL TABLE ITAB
PERFORM GET_DATA.
*DEFINE USER DEFINED FIELDCATALOG
PERFORM DEFINE_FIELDCATALOG.
*SUBTOTALS AND TOTALS DISPLAY USING SORT
PERFORM SORT_LIST.
*CHANGE FCODE OF STATUS
PERFORM CHANGE_FCODE.
*CHECK RADIOBUTTON OPTION AND ACCORDINGLY FINAL DISPLAY
PERFORM CHECK_OPTION.
*& Form GET_DATA
* text
FORM GET_DATA.
SELECT VBELN
VBTYP
AUDAT
AUGRU
AUART
NETWR
WAERK FROM VBAK INTO TABLE IT_VBAK
WHERE VBELN IN S_VBELN AND VBTYP = P_VBTYP
AND ERDAT > '01.01.2004' AND NETWR > 0.
LOOP AT IT_VBAK.
IF IT_VBAK-NETWR < 10000.
IT_VBAK-ICON = '@08@'.
ELSEIF IT_VBAK-NETWR > 100000.
IT_VBAK-ICON = '@0A@'.
ELSE.
IT_VBAK-ICON = '@09@'.
ENDIF.
MODIFY IT_VBAK INDEX SY-TABIX.
ENDLOOP.
ENDFORM. "GET_DATA
*& Form CHECK_OPTION
* text
FORM CHECK_OPTION.
WA_EVENTS-NAME = 'TOP_OF_PAGE'.
WA_EVENTS-FORM = 'TOP'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
WA_EVENTS-NAME = 'END_OF_LIST'.
WA_EVENTS-FORM = 'END_LIST'.
APPEND WA_EVENTS TO IT_EVENTS.
CLEAR WA_EVENTS.
IF LIST = 'X'.
PERFORM LIST_DISP.
ENDIF.
IF GRID = 'X'.
PERFORM GRID_DISP.
ENDIF.
ENDFORM. "CHECK_OPTION
*& Form DEFINE_FIELDCATALOG
* text
FORM DEFINE_FIELDCATALOG.
WA_FIELDCAT-COL_POS = 1.
WA_FIELDCAT-FIELDNAME = 'ICON'.
WA_FIELDCAT-SELTEXT_L = 'ICON'.
WA_FIELDCAT-ICON = 'X'.
WA_FIELDCAT-OUTPUTLEN = 8.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 2.
WA_FIELDCAT-FIELDNAME = 'VBELN'.
WA_FIELDCAT-SELTEXT_L = 'SALES DOC NO.'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 3.
WA_FIELDCAT-FIELDNAME = 'AUDAT'.
WA_FIELDCAT-SELTEXT_L = 'CREATED ON'.
WA_FIELDCAT-OUTPUTLEN = 10.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 4.
WA_FIELDCAT-FIELDNAME = 'VBTYP'.
WA_FIELDCAT-SELTEXT_L = 'CATEGORY'.
WA_FIELDCAT-OUTPUTLEN = 1.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 6.
WA_FIELDCAT-FIELDNAME = 'AUGRU'.
WA_FIELDCAT-SELTEXT_L = 'REASON'.
WA_FIELDCAT-OUTPUTLEN = 3.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 5.
WA_FIELDCAT-FIELDNAME = 'AUART'.
WA_FIELDCAT-SELTEXT_L = 'DOC TYPE'.
WA_FIELDCAT-OUTPUTLEN = 4.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 7.
WA_FIELDCAT-FIELDNAME = 'NETWR'.
WA_FIELDCAT-SELTEXT_L = 'NET VALUE'.
WA_FIELDCAT-OUTPUTLEN = 17.
WA_FIELDCAT-DECIMALS_OUT = 2.
* WA_FIELDCAT-DO_SUM = 'X'.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
WA_FIELDCAT-COL_POS = 8.
WA_FIELDCAT-FIELDNAME = 'WAERK'.
WA_FIELDCAT-SELTEXT_L = 'UNIT'.
WA_FIELDCAT-OUTPUTLEN = 50.
WA_FIELDCAT-TABNAME = 'IT_VBAK'.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "DEFINE_FIELDCATALOG
*& Form DEFINE_LAYOUT
* text
FORM DEFINE_LAYOUT.
LAYOUT-ZEBRA = 'X'.
LAYOUT-SUBTOTALS_TEXT = 'SUBTOTAL SUM'.
LAYOUT-WINDOW_TITLEBAR = 'EXERCISE 2'.
LAYOUT-TOTALS_TEXT = 'TOTAL'.
ENDFORM. "DEFINE_LAYOUT
*& Form SORT_LIST
* text
FORM SORT_LIST.
WA_SORT-FIELDNAME = 'VBELN'.
WA_SORT-TABNAME = 'IT_VBAK'.
WA_SORT-SPOS = 1.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-FIELDNAME = 'NETWR'.
WA_SORT-TABNAME = 'IT_VBAK'.
WA_SORT-UP = 'X'.
WA_SORT-SPOS = 2.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
ENDFORM. "SORT_LIST
*& Form LIST_DISP
* text
FORM LIST_DISP.
PERFORM DEFINE_LAYOUT.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IT_FIELDCAT = IT_FIELDCAT
IS_LAYOUT = LAYOUT
IT_SORT = IT_SORT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
IT_EXCLUDING = I_FCODE_EXTAB
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_EVENTS = IT_EVENTS[]
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_VBAK
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "LIST_DISP
*& Form GRID_DISP
* text
FORM GRID_DISP.
PERFORM DEFINE_LAYOUT.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_SORT = IT_SORT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
IT_EXCLUDING = I_FCODE_EXTAB
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_EVENTS = IT_EVENTS[]
TABLES
T_OUTTAB = IT_VBAK.
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "GRID_DISP
*& Form STATUS
* text
* -->P_EXTAB text
FORM STATUS USING P_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING P_EXTAB.
ENDFORM. "STATUS
*& Form USER_COMMAND
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
CASE R_UCOMM.
WHEN 'BACK' OR 'CANC' OR 'EXIT'.
LEAVE TO SCREEN 0.
WHEN '&IC1'.
SET PARAMETER ID 'AUN' FIELD RS_SELFIELD-VALUE.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM. "USER_COMMAND
*& Form CHANGE_FCODE
* text
FORM CHANGE_FCODE.
WA_FCODE = 'PRNT'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&OAD'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&AVE'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&EB9'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&SUM'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&UMC'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&XPA'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
WA_FCODE = '&OMP'.
APPEND WA_FCODE TO I_FCODE_EXTAB.
ENDFORM. "CHANGE_FCODE
*& Form TOP
* text
FORM TOP.
IF LIST = 'X'.
WRITE:/ SY-ULINE.
WRITE:/ 'DATE:', SY-DATUM,55 'INTELLIGROUP ASIA PVT LTD'.
WRITE:/ 'TIME:', SY-UZEIT.
WRITE:/ 'USER NAME:', SY-UNAME,60 SY-TITLE.
WRITE:/ 'PAGE', SY-PAGNO.
WRITE:/ SY-ULINE.
ENDIF.
IF GRID = 'X'.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
E04_LT_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER.
* Listenüberschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'Summary'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
* Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Intelligroup'.
LS_LINE-INFO = ''.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
LS_LINE-KEY = 'ASIA'.
LS_LINE-INFO = 'PVT LTD'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
* Aktionsinfo: Typ A
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'truman'.
APPEND LS_LINE TO E04_LT_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = E04_LT_TOP_OF_PAGE
I_LOGO = 'ENJOY_SAP_LOGO'.
ENDIF.
ENDFORM. "TOP
*& Form END_LIST
* text
FORM END_LIST.
IF LIST = 'X'.
SKIP 2.
WRITE:/60 'END OF PAGE'.
ENDIF.
IF GRID = 'X'.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
E04_LT_END_OF_LIST TYPE SLIS_T_LISTHEADER.
* Listenüberschrift: Typ H
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'Summary'.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
* Kopfinfo: Typ S
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Intelligroup'.
LS_LINE-INFO = ''.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
LS_LINE-KEY = 'ASIA'.
LS_LINE-INFO = 'PVT LTD'.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
* Aktionsinfo: Typ A
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
* LS_LINE-KEY: not used for this type
LS_LINE-INFO = TEXT-105.
APPEND LS_LINE TO E04_LT_END_OF_LIST.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = E04_LT_END_OF_LIST.
ENDIF.
ENDFORM. "END_LIST -
How does the traffic widget work?
Has anyone been able to get the traffic widget to work? I have it turned on in iOS8 and see nothing. Is there a set up I'm missing?
On my iPad it's tap the i in a circle in the lower right then tap show traffic. Traffic will be in dots.
“Find out about traffic conditions. Tap ( i in cicle) then tap Show Traffic. Orange dots show slowdowns, and red dots show stop-and-go traffic. To see an incident report, tap a marker.”
Excerpt From: Apple Inc. “iPad User Guide For iOS 8.” Apple Inc., 2014. iBooks.
This material may be protected by copyright.
Check out this book on the iBooks Store: https://itun.es/us/5A6R2.l
Maybe you are looking for
-
Do apple sell the frontrow remote/reciever as an optional extra for older macs? i have a powerpc g4 1.5ghz mini and wanted to know if I could get a remote for it. Originally I didn't think i was missing much by not having it but i recently got a macb
-
After disconnected all the computer peripherals and trading computer desks, today I can't get the two LaCie external drives to mount. They were working yesterday, but not without problems. The 1T is hooked up for Time Machine, and it ran continuall
-
How do I turn off apps in iOS 7
I don't know how to turn off apps on our iOS 7 iPad air and iPods. Used to double click start button and then all apps in bar below available to turn off. Now not so. Help
-
HP Gallery (C510a eStation Zeen) Problems
When I first got my printer, I loaded 6GB of images onto the SD card (in one large directory with many smaller subdirectories) before placing it in the Zeen. I have never been able to get the HP Gallery to work properly. I just says "Loading..." a
-
Integrate Director Movie into Flash CS5
Hi, I have couple of interactive media pieces created in Director MX 2004. I would like to know if the latest Flash CS5 can handle Director Movies. Kindly advise the best way to create a portfolio (consisting of Dorector and Flash Movies) that can b