How to process F-29 in mass?

Hi all,
I have many noted items (maybe 200) which I must associate to down payment request (F-29).
Could you give me advice on the way to do this? (Using a specific program, a mass transaction...?)
Thanks for your advice!
David

Hi,
I want to link the noted item and the dpr.
Do you mean using LSMW with a call transaction of F-29 or using a standard program like RFBIBL00?
Thanks!
David

Similar Messages

URGENT - HOW TO PROCESS A BDC SESSION (IN BACKGROUND) FROM INSIDE A REPORT

Hi All,
I have a requirement wherein I need to create a BDC session for mass update(from file) of one transaction and check if at all that update has taken place and proceed with the same session for another transaction.
For this I need to know how to process the session in background in a report, so that if the processing is done, the next set of data to update a different transaction can happen.
All inputs are welcome and highly valuable to me.
If someone is unable to intrepret this, I'll detail it again.
Thanks in advance,
Vaishnavi Varadarajan

Hi,
1.Use RSBDCDRU is an exe pg.With this u can download the logs into local file.
2.It will create the spool request .from there u can download or print.
OtherWise:
Use the code from the link below. U need to provide the session queue id as input and it will download the log to an excel file. U can change it to ur reqmt.
Re: BDC
regards
kiran

How to process TR created for 122 mov ?

Dear All,
How to process the TR created in the background for 122 mov. through QA module ?
I have not processed the TR created for the GR document. When I try to process it, the open qty in the TR is the difference between (Total GR Qty - Return Qty).
Hence the TR created for 122 mov is Open.
Please guide me how we process such TR's.
Hope my query is clear.
Regards,

Hi Prakash & Vineet,
Thanks a lot for your reply's.
See my scenario goes like this & hope this is a common one in case of vendor rejections.
when we create a GR an Inspection lot & TR will be created for the whole GR Qty say (100) with Stock type as Q (Quality).
Suppose If I do the UD for the Inspection lot where I accept 70 Qtys & Reject 30 Qtys then automatically a TR will be created for the 30 Qtys.
Since I have already rejected 30 qtys, only 70 qtys will be open in the TR which was created at the time of GR (which is yet to be processed).
So this TR can be converted into a TO & Stock can be placed in the Destination Storage type & Bin.
Now coming to the rejected qty which is getting knocked off in the interim bin itself the stock level in MM-IM & WM is balanced.
But my concern is TR which was created against the Rejected Material Doc (122) is Still Open. So what do we do with such TR's which are open?
In LB02 we can either delete this TR or change the Status to Processed.
I hope many of you might have come across this scenario. So how did you manage this? Is there any T.CODE available where we can delete or change the status of TR's as processed in a mass way ?
Hope my query is clear now.
Thanks & Regards,

How to process Customer Open Items? If that Customer is also an Vendor.

Hi All,
I need some help for the below configuations,
1. How to process Customer Open Items? If that Customer is also an Vendor to the Company. ( How to adjust these open amounts)
1. How to process Vendor Open Items? If that Vendor is also an Customer to the Company. ( How to adjust these open amounts)
Thanks
Chandra

Hi Chandra,
In addition to all the above, if the Customers and Vendors are in different company codes, then, you would have to also do the following configuration.
Execute transaction code OBYA, when prompted, type in 1st coy code, say A and then 2nd coy code, say B. This would take you to the "Maintain FI Configuration: Automatic Posting - Clearing Accounts" screen.
In the first frame, where you have
Posted in : A
Cleared Against : B
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
In the second Frame
Posted in : B
Cleared Against : A
Under Receivable
Debit Posting Key : 01
Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
Under Payable
Credit Posting Key : 31
Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
So, if you are using the Customer/Vendor approach, company A must be set up as both a Customer(Use Txn Code XD01) and a Vendor(USe Txn Code XK01) in Company B and vice versa.
Once you have completed this set-up, you can then use transaction F.13 and/or F13E to carry out your automatic clearing.
However, if you intend to use the G/L approach, then the account numbers would be Inter-coy G/L account for each coy code as defined in the chart of accounts.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

How to process each records in the derived table which i created using cte table using sql server

I want to process each row from the CTE table I created, how can I traverse from first row to second row and so on....
how to process each records in the derived table which i created using cte table using sql server

Ideally you would be doing a set based processing rather than traversing row by row as thats more efficient. To answer it specific to your scenario we may need more info. Can you explain with some sample data your exact requirement?
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to process pdf file in clower ETL

Hi,
I want process pdf document in clower ETL dataintegartor. I have created sample project and created ETL garph universal data reader, data i have imported pdf file, while openning the metta data information it's show encoding data format and invalid delimiter and while running error in the console
Please assist me how to process pdf file with unstructured data format.
I am getting below the error,
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node DATA_READER0 finished with status: ERROR caused by: Parsing error: Unexpected record delimiter, probably record has too few fields. in field # 1 of record # 2, value: '<Raw record data is not available, please turn on verbose mode.>'
ERROR [WatchDog] - Node DATA_READER0 error details:
org.jetel.exception.BadDataFormatException: Parsing error: Unexpected record delimiter, probably record has too few fields. in field # 1 of record # 2, value: '<Raw record data is not available, please turn on verbose mode.>'
 at org.jetel.data.parser.DataParser.parsingErrorFound(DataParser.java:527)
 at org.jetel.data.parser.DataParser.parseNext(DataParser.java:437)
 at org.jetel.data.parser.DataParser.getNext(DataParser.java:168)
 at org.jetel.util.MultiFileReader.getNext(MultiFileReader.java:415)
 at org.jetel.component.DataReader.execute(DataReader.java:261)
 at org.jetel.graph.Node.run(Node.java:425)
 at java.lang.Thread.run(Thread.java:619)
please can any one help me.
Thanks
Rajini C
Edited by: 954486 on Sep 19, 2012 11:19 PM

There is a separate forum for the BI/Information Discovery application of Endeca software: Endeca Information Discovery You should post your message there.
Thanks.
Sean

TS3899 I have just up dated my iphone 5s to iOS7 - i now have 8310 emails in my inboxes - how do i delet them on mass & how do i restrict the number of recent emails in my inboxes?

Can anyone help? - uodated to iOS7 and now have 8310 emails - how do i delete them on mass & how do i restrict emails in my inboxes to the most recent 250?

Hey iphoneboy16
Create a Shared Photo Stream to get any missed photos that did not make it into the Photo Stream. Remember, when you turned on Photo Stream it will start to copy new photos taken at that point in time. It also only holds the pictures for 30 days and up to 1000 photos.
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/HT4486
iCloud: Troubleshooting iCloud Photo Sharing and Shared Photo Streams
http://support.apple.com/kb/TS4379
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HOW TO Create variants for transaction MASS on LFA1 object?

hOW TO Create variants for transaction MASS on LFA1 object?
Edited by: cheppalliakr on Nov 10, 2011 1:09 PM
Moderator message: please do more research before asking, show what you have done yourself and provide more information when asking.
Edited by: Thomas Zloch on Nov 10, 2011 3:10 PM

Hi Oscar ,
You need to create optional date prompt variable in BW which fills your requirement .
Ex : If you require report should always run for 1st of the month to last of month .Then create Optional date variable in BW with interval .write customer exit ,
if from date is left blank it should take 1st of the month and if todate is left blank it should take last of the month .
when creating webi schedules , leave prompts as blank.

WMS : How to Process Sales Order Released before Turning on WMS

Hello Gurus,
How to process sales orders released before WMS enable flag is turned on in the new WMS enviournment in Oracle 11.5.10 ?

Helios,
Thanks for the document.
I m looking for how to perform Pick confirm transactions for already printed Pick slips before WMS enabled flag is turn on for the org.
One option is to close all the deliveries but if there is no on hand at that point the they will remain option.
Other option is to Back order those deliveries and re release them post wms enable flag is turned on... The only issue i see here is that if there are more new orders for one of the items and the orders are released then which orders will get allocated/reserved if there is limited on hand quantity to statisfy the SO need.
Let me know if you can think off some alternative solution.
Apprecite help !!
Thanks,
Sam

How to process the Received Idoc in SAP R/3 ? What to be done ?

Hi All
I am working for file to Idoc scenario.....
Idoc received into SAP R/3 but how to process the Idoc data ?
Such it will store in SAP R/3 DB.....
Clearly
How to Process the received idoc data into SAP R/3 ? (this is for inbound idoc)
I hope any one can help me on the processing steps ?
Waiting for valuable inputs form experts
Regards
Rakesh

rakesh
chec <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660">Sample IDoc</a>
normally, based on the idoc types it will get processed. if it is an idoc with master record it will create appropriate master records or if it based for a transaction it will create one.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098</a>

How to process an output message after pick and pack in LM46?

Hi,
I've implemented the User Exit to print the HU using LM18, it's working great but no output message is processed (and indeed, the sticker is printed on my own printer instead of the one defined in my Z custom output message).
I used LM46 to pick and pack the HU, am i missing a step?
In other words, how to process my custom output message after the pick and pack?
Is there some code I must add in the LM18 User Exit?

You know, in a user exit or a BADi you can access any variable of the program you want.
Just find what which program calls the Exit User, put a break-point in it, and find the variable you need to access.
Then add this kind code in your Exit :
DATA: l_var TYPE ....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)variable') TO <fs_var>.
IF sy-subrc = 0.
l_var = <fs_var>.
ENDIF.
Same thing for a table :
DATA: lt_var TYPE TABLE OF....
FIELD-SYMBOLS: <fs_var> TYPE ANY.
ASSIGN ('(PGMNAME)table[]') TO <fs_var>.
IF sy-subrc = 0.
lt_var[] = <fs_var>.
LOOP AT lt_var ASSIGNING ...
ENDLOOP.
ENDIF.

How to process Line Selection on ALV Table in ABAP WebDynpro

Hi there,
I have a view with an ALV table whose context node retrieves its data from a Service Call for a method.
The method provides certain data of a database table which the ALV displays.
Now I would like to be able to select one row of that ALV table and after pressing a button or doubleclicking on the row or whatever a different view (as for me it is also ok on the same view) should appear to display the details of that selection.
I only need to know how to retrieve the selected data.
Or its index within the internal table.
I am already looking for hours for a useful thread and actually there is one which obviously is about a similar issue apart from the multiple selection part:
How to process multiple row selection in ALV table in Wendynpro ABAP? Help!
but i am afraid that i don't understand it. Or at least I misunderstand it since it does not work with me.
The system example mentioned in the thread does not help me either because it somehow does not correspond to my needs, does it?
It would be GREAT if somebody could help me with that. Please keep it simple for I am not an expert in webdynpro yet (obviously ^^) and also please explain in detail what I have to do with the context nodes since I am not sure whether the selection is stored in my already existing node or whether I need a special one for that.
Thanks!!
christina

Hi Christina,
If you just want to get one column data of the line that user clicked, use the Web Dynpro Code Wizard to Read Context of attibute you needed, then you will get code as follow:
* Define data for read attribute
 node_alv TYPE REF TO if_wd_context_node,
 elem_alv TYPE REF TO if_wd_context_element,
 stru_alv TYPE if_view_display=>element_alv ,
 item_column_name LIKE stru_alv-column_name.
* navigate from <CONTEXT> to <ALV> via lead selection
node_alv = wd_context->get_child_node( name = if_view_display=>wdctx_alv ).
* get element via lead selection
elem_alv = node_alv->get_element( ).
* get single attribute
elem_alv->get_attribute(
 EXPORTING
 name = `COLUMN_NAME'
 IMPORTING
 value = item_column_name ).
The value of column_name is stored in item_column_name.
If you need the index that the user clicked, try this:
* Definition of field symbol for index
FIELD-SYMBOLS : <fs_index> TYPE data.
* Get the selected index
ASSIGN r_param->index->* TO <fs_index>.
The index of clicked line is stored in field symbol <fs_index>.
Hope it will help.
Best Regards,
Stephanie

How to process a Blanket Purchase order?

Hi,
Can you please let me know how to process a blanket purchase order received from a customer?
Can we create a sales order based on the customer's blanket purchase order?
Please help me out with this issue.
Sincerely,
Puja

Dear Puja,
You can create Sales Order ....with reference to Blanket / Frame Purchase Order. This Frame PO contains, Validity and Limit.
Based on this info, you can create Blanket Sales Order.
You can split the blanket sales orders relevant to the customer PO.
Regards - Muralidhara

How to process data in the past based from data in the present

hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi ‏16 KB
weight.txt ‏1 KB
data .txt ‏1 KB

Hi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir.

How to process the PDF files at one time

Hello,
I'm using WebDynpro for ABAP and Adobe Interactive Forms as offline forms.
I collect PDF files from received e-mails.
I want them to be taken in at one time.
(for example,
system job read PDF files and create data in ERP,
or I upload the files one time.)
Please let me know
- How to process the PDF files at one time.
Best regards,
Koji

When you click the edit button in recents, try clicking the clear button in the upper left.

How to process F-29 in mass?

Similar Messages

Maybe you are looking for