How to process multiple images and each image has multipl links dynamically

I saw this web site
http://escience.invitrogen.com/ipath/iPath.jsp?cn=united+states&mapid=479&highlightGene=ADAM10
when the small icons in the left map is clicked, the corresponding information of the icon display on the right. For one map, I know I could set up static URL for each gene name. But there are hundards of images, is there a way to dynamically process all the images instead hard code hundards of pages?
Many thanks!

The map is generated using Macromedia Flash. (I could tell because when I right-clicked on it I got a context menu including "About Macromedia Flash Player 8".) That's a programming language you could learn if you liked, but it has nothing to do with JSP.

Similar Messages

  • How to export an album and keep images in the same order in elements 11 mac

    I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
    How can I prevent that, without having to renumber al 500 images separatly?
    Gr Jos

    Thanks for the tip, Michel
    It worked like a charm…
    cheers Jos
    Op 28 okt. 2013, om 18:49 heeft MichelBParis <[email protected]> het volgende geschreven:
    Re: How to export an album and keep images in the same order in elements 11 mac
    created by MichelBParis in Photoshop Elements - View the full discussion
    JosU a écrit:
    I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
    How can I prevent that, without having to renumber al 500 images separatly?
    Gr Jos
    The order in album is only kept in the organizer database, so the only way not to lose that order is to rename files.
    If you are using the 'export' function, select your album in custom order, select all photos and in the dialog, choose to rename with a common base name.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5794538#5794538
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5794538#5794538
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5794538#5794538. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How to stop on the last image and that image remains on the screen?

    hello,
    how to stop on the last image and that image remains on the screen?
    thanks
    Yves

    Two ways are;
    split the clip with the razor tool at the point you want the image to freeze, r-click and select a Frame Hold option,
    or
    position the play-head at the end of the clip you want freezing and export a still frame. Re-import it and put it in your sequence.

  • Before image and after image is not updating correctly with 2LIS_04_P_ARBPL

    Hello BW gurus
    I am facing problem with the posting date extraction from the extractor 2lis_04_p_arbpl. I am getting incorrect before image and after image. Please let me know how to solve this problem.
    Thanks and regards
    kiran.

    Hi,
    It is difficult to check this in the Source System and there is no direct method. I can give you a workaround which we did analysed for some of delta datasources.
    Steps to be followed sequentiall once the step is successful:
    1. Create a Production order or something.. Note down the number.
    2. Check the datasource whether you get the same Production Order as delta
    3. Now do whatever confirmation etc . for the same Production Order
    4. Check the datasource (RSA3) and see wat it extracts.. might be multiple records..
          In that case just see the sequence of records.. and the changes each record has brought in.. hope this way we can simulate the delta datasource realtime..
    And if you find the sequence or somthin is correct and in BW is not updating properly then it is our fault to dig and find out further.. If the issues is at the RSA3 itself, then u can raise an OSS Message as a Bug.
    Hope it helps.
    Regards,
    Chathia.

  • I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

    I am trying to use photomerge compose.  I open one standard jpeg image and one image that is my business logo in a png format.  When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it.  It has worked in the past but I downloaded the update today and photomerge will not work correctly.  Any ideas?

    hedger,
    How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • What is diff B/W dalta image and reverse image

    What is diff B/W dalta image and reverse image
    Edited by: Philip Eller on Jun 3, 2008 8:44 AM
    Edited by: Philip Eller on Jun 17, 2008 9:18 AM*

    Please post your question to the BW forum.

  • How can I preserve row and column addresses on multiple cells at once in Numbers?

    How can I preserve row and column addresses on multiple cells at once in Numbers 3.2.2? I do a lot of rearranging and sorting and want to reference cells in other sheets. After entering the formulas (example: '=Sheet1::Table 1::H126') I will sort the table and the formulas will not move with the sort.  I think I can fix this by going cell by cell checking the 'preserve row' and 'preserve column' boxes when editing the formula.  I want to avoid having to go one by one.  I know that checking the boxes creates a formula like this: '=Sheet1::Table 1::$H$126'  I have also tried entering this manually and filling down but it doesn't include the preservations (the $$) in the autofill.  If there is another way to remedy my sorting problem that would also be welcomed!
    THANKS!!

    The title of the post is this
    How can I preserve row and column addresses on multiple cells at once in Numbers?
    I restated the Question as follows
    Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
    In both cases it is not asked if multiple cells can be set to....
    That is a given.
    Step back a second...  It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
    Whats is being asked is:  if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
    YES or NO
    If YES how?

  • Placing OS image and Data image on right partition

    Hi ,
    We are facing issue in placing right image at the right partition. 
    We have OS image and data image. We are formatting and partitioning HDD as 40% (OSDisk) and remaining 100% as (Data). Both paritioons are active and selected as primary. 
    Then in installing operating system step, i have selected place image based on variable 'OSDisk'
    and Data image is also slected to be placed based on variable 'Data'.
    TS finishes without any issues but when i login to the machine i can see that OSDisk has become 'D' Drive and Data Drive has become 'C' so it shows C drive with label as 'Data' and D drive is label as 'OSDisk'
    I want to place OS on C drive and Data drive should always be as 'D' drive.
    I have tried another method and this time i tried to install OS as 'place based on stored variable i.e. OSDisk but install data image as next available partition but with this placement OS never boot after restart and TS eventually fails. 
    My aim is to make 'C' drive contain OS image and 'D' Drive to containg  data image content and not the otherway around as it is happening with current test. 
    Any suggestions will be highly appreciated. Thanks. 
    Regards,

    Hi ,
    Yes it is Config manager 2012 R2 but image is actually not source media install.wim. It a custom captured image through MDT2013. Image has 1 partition only.
    However I tried the above solution but drive letters are still not coming correct for OSDisk and Data Drive. Data is coming on 'C' drive and OSDisk is coming at 'D' drive.
    Regards,

  • Before image and after image concept of ODS

    Hi Gurus,
    Could anybody help me in understanding the concept of " Before image and after image in ODS"
    Kindly forward me if any good docs are available on my email ID: [email protected]
    With regards,
    wrushali

    check this link for after image.
    Re: regarding ODS
    and before image is snapshot of the data before a change took place
    after image is snapshot of the data after change.
    these are used for delta update.
    Hope it helps.
    Regards

  • After Image and Before image in case of Generic extraction

    Hi Guru's,
    Please explain the concept of the After image and before image wrt to Generic extraction.

    hi,
       consider a record in data source suppose it is return to ods
    now
    materid matnme  quantiy
    1         tiles         20
    another recored with the same charcteridti arrive in bw
    i.e
    1         tiles          78.
    now rhe reault is
    1 tiles     78(it is new image) for new image
    1 tiles     20(before image)
    1 tiles   +58(additive image) for additive image.

  • LO Cookpit: what is "Before Image" and "After Image" related to Delta ?

    Someone mentions "Before Image" and "After Image" which is related to Delta method in source systems.  Someone know what they mean?
    Thanks

    Before Image and After Image are different Record modes present.
    Before Image :
    Lets assume the data present in the Cube and ODS is
    Doc No --Mat Type --- QTY
    120 -
    M01----
    10
    Now let assume that the data has changes and the quatity has to be changed from 10 to 8.This can be done in different way depending on if we are using a Cube or ODS.
    If its a Infocube . i.e it is additive so we can send the before image and the after image together
    Eg:
    Doc No -
    MAT type -
    QTY
    120--M01--
    -10
    120--M01--
    8
    If the Data Source sends both the before image and the after image, this combination can be loaded in any cube or ODS target. For ODS targets, if Overwrite setting is made, then only the after image(the last one) will make it to the Activation queue table of the ODS. If the ODS is set to Addition then both before and after image are needed to make a correct load to the target.

  • I seem to have lost my original images and unwanted images have moved into my library. I couldn't access lightroom 3 as usual and was provided a default option which I clicked. I ely heavily on lightroom and have spent countless hours fixing images, ple.

    Hi, I seem to have lost my original images and unwanted images have moved into my library. I couldn't access lightroom as I would normally and was provided with a default option which I clicked. This all occured while I was trying to free up space on my computer while viewing saved images on my hard drive, which are linked up directly to a photoshop elements program. Please tell me this can be fixed.....

    Hi there,
    I don't believe I did move or delete my catalogue. Where can I look for my catalog file. Why does my Lightroon now contain more images and ones I don't want on it, without my physically importing them?
    Thanks
    Pablo

  • How do remap drive names and not lose project clip links to Event names...?

    how do remap drive names and not lose project clip links to Event names...?

    You will need an extra external drive. All moves must be done within iMovie to preserve your links to the projects.
    First Move (command-drag) the event to the extra drive. Make sure the project still works.
    Then rename, reformat, or repartition your drive as needed. Then, if you want, move the Event back to the newly named drive, again via Command-Drag within iMovie.

  • HT5655 I have downloaded the latest flash for my mac (running mountain lion 10.8.2) multiple times and have uninstalled it multiple times, but it still says blocked plug in. Im using firefox but i need safari back. any help?

    I have downloaded the latest flash for my mac (running mountain lion 10.8.2) multiple times and have uninstalled it multiple times, but it still says blocked plug in. Im using firefox for now. any help? Firefox and safari are like night and day. i just want safari back.
    Thanks.

    Adobe support article.
    Adobe Flash Player Troubleshooting
    Adobe Flash Uninstaller

  • Changing Computers - How do I move Lightroom and its images?

    I'm retiring an old MAC notebook and moving to a new desktop MAC so I have to move LR and all my images, preferences, etc.
    I currently have an internal hard drive with the following:
    root\applications\adobe lightroom.app
    root\pictures\lighroom\lightroom catalog.lrcat
    root\pictures\lightroom\lightroom catalog previews.lrdata
    root\library\preferences\com.adobe.lightroom.plist (what is this?)
    root\library\receipts\adobe photoshop lightroom.pkg (I think this is the installer. can i delete?)
    root\library\application support\adobe\lightroom\--- many folders with presets, etc
    I also have an external raid system with my images on it:
    external raid\lightroom images\-- organized by year and then subfolders -- these were all imported into lighroom
    I also make backups of the lightroom catalog to another external drive:
    external drive\lightroom backups
    I plan on replacing this whole configuration with a MAC with an internal RAID configuration. I want to use the external RAID and external drive for backup only.
    What I'd like to know is how I move everything and not break everything. I saw a FAQ that said to drag the catalog file over to the new location and relaunch but what if the images are moved too? Or should I do this in discrete steps?
    I have my original CD media with the application but that was a few versions old now. I'm currently running 1.3.1.
    Lastly, I'm wondering if I am missing any critical files in my list that I dont' know about and whether I can delete the installer (listed above) and the com.adboe.lightroom.plist file (listed above).
    Oh, and do I have to put everything in these separate locations? I really would like to put all this in one place instead of having all this in disparate folders. Is that advisable? Maybe the app in the applications folder and then just a folder somewhere else called Lightroom with all the other components? Or is that stupid?
    Thanks for any help or advice. I've got about 8,000 images and I'm anxious about this move.
    Deena

    I looked in the FAQ and couldn't find anything except what I've cut and pasted below. First, I don't totally understand it, but more importantly it seems to be talking about just moving the catalog and previews files, not the application and images and the catalog and previews files.
    I'm just trying to make sure I understand the process so I don't screw up all my work. If you know any location in the manual with this info or other threads, that would be great.
    Thanks,
    Deena
    How do I place the Lightroom Library on an External Drive?
    Ian Lyons - 04:03pm Nov 20, 2007 Pacific
    Q: How do I change the location of the Lightroom Library on an external disk drive whilst also ensuring that lightroom maintains the connection with the new location?
    A: The easiest way is to copy the folder containing the Lightroom Catalog and the Previews to the new disk drive, navigate to the new folder location, then double click on the Catalog file to relaunch.
    Note: the Lightroom catalog and preview package use the lrcat and lrdata extension respectively.

Maybe you are looking for