How to process Panasonic's HDC-HS900 AVCHD Full HD 60 so that it outputs same Full HD 60p?

How to edit Panasonic's HDC-HS900 AVCHD Full HD 60 using Premiere so that it outputs same Full HD 60p?

Yes.PrPro takes 4k and above ... your footage isn't anything "special" that isn't used in it daily. Import it through the Media Browser ... being sure to import the ENTIRE contents & folder structure of the cards AS-IS. Then from the Project Panel, choose "New Item" from the icon lower right, drag & drop a clip onto it and accept the settings as it will automatically set the timeline settings for the footage.
On export, choose same as source except of course for needing a different codec. So ... Ann's question still stands ... what are you/clients using it for? That will help choose the export codec.
Neil

Similar Messages

  • I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

    I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

    Make sure that you do not run Firefox in permanent Private Browsing mode.
    *https://support.mozilla.org/kb/Private+Browsing
    *Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    *Deselect: [ ] "Always use private browsing mode"
    *Select : [X] "Remember search and form history"
    See also:
    *https://support.mozilla.org/kb/Form+autocomplete
    <i>[locking thread due to the age]</i>
    If you have further questions then please start a new thread.
    *[[/questions/new start a new thread]]

  • How do I change an Apple ID on one of two devices that share the same ID?

    I have two devices with the same apple Id. My iphone and my daughters iphone. I can uncheck her # from the imessages to keep messages from going to her phone. I would like to get a new apple id for her phone so as to separate both of our phones.. How do I change my daughters iphone apple id to one different than mine?

    Just make her a new AppleID - https://appleid.apple.com
    On her device, log out of iMessage with your AppleID, then log back in with her new AppleID.  For iCloud, first go into the iCloud account settings and disable find my iPhone, then delete the iCloud account.  Now add a new iCloud account using her new AppleID.
    You both can continue to use the same AppleID in the iTunes and App stores if you wish to share purchases.  If not, just scroll to the bottom of the feature page in the store, log out with your AppleID and log back in with her AppleID (she will need your AppleID and password to update anything purchased with your AppleID though).

  • How can I get Lightroom to export my edit to a jpeg that looks the same ?

    Hi everyone,
    I can't get my jpeg export to look the same as it looks in lightroom after edit.
    The jpeg isn't that different but still, way too much for me.
    I did use sRVB, 100% no scaling etc... but it seems the export won't take "all" of my noise reduction correction..
    This is a portrait shot in lowww light, and the raw file was rather crappy. Eventhough I was really happy with my smooth final edit but I can't get my jpeg to look as clean.. please someone help meee !
    Regards,    

    What infos can I give you all to help me sort this problem out ?
    export : quality 100%
                 sRVB
                 no scaling
    In lightroom my image is just clean whereas after export, I can notice some artifacts or "moire", and it feels like the noise reduction/sharpen tool doesnt apply its correction as it should.. but it still does a bit bc it's not as if I turned it off completly...
    This is driving me crazy
    I'm about to install RC3 and try with it...

  • How to process DoubleClick event on JTextField?

    how to process DoubleClick event on JTextField?

    add a mouse listener that listens for mouse clicked and you can get the click count from the event...

  • There are so many add-ons now that do the same thing, how can I tell the full features of an add-on compared to the others. I know I have way to many of the same and need to get rid of the unwanted ones?

    can we get a side by side comparison of the add-ons. How can I tell Ive got 2 or even 3 add-ons that do the same thing? and how can I pick the best one for my needs so I can uninstall all the others?

    I mutled through best I could but I know I still have duplicate apps, different names, but same functions. One last thing is why do I keep getting 2-3 times a day that firefox needs a major update? I let it go through its motions but then that same msg pops up again a few hours later

  • Panasonic HDC-HS900 connect to iMac and iMovie or Final Cut Pro

    How do you connect (I know its USB - But camcorder only gives option of PC),  and import video from Panasonic HDC-HS900 ?
    Are there any other video (eg. Sony) that have similar problems.
    Thanks

    This discussion would be helpful if you want to edit 1080 60P video in Imovie
    http://discussions.apple.com/thread.jspa?threadID=2380085&ts%20tart=0
    Another great resource for forcing Imovie to accept 50/60P content (Imovie defaults to 25 or 30P depending on if your using NTSC or PAL) is this page
    http://ianperegian.com/My_FZ35_38_Webpage/Edit_1080_50p_and_burn_a_disk.html
    There are a few steps to take but I can confirm that IMovie 8 works well with this method and I shoot,edit, use and burn Blu Ray compatible 50P (I'm using a PAL camera) content all the time with my HDC-HS900

  • Panasonic HDC HS900+ final cut X

    Just bought FCP X but it doesn't seem to see my camera, a panasonic HDC HS900.
    Any ideas? Thanks!

    Thanks for responding Tom. I found another thread that answered my question:
    Connect the camera before opening FCP, choose recorder insteard of PC, select hard drive. The camera then mounts on the desktop & when you open FCP you will be able to import video.

  • Panasonic HDC-MDH1 AVCHD

    I am planning on purchasing two Panasonic HDC-MDH1 cameras for weddings and events. These cameras record in AVCHD ; MPEG4-AVC/H.264 (AVCHD standard compliant) as the supplier says. Is this compatible with Adobe Premiere?
    I have read some threads that said that it is not really supported by Premiere and can use some advice.
    Thank you.
    Jonah

    Ok guys, I am not too good of an expert here. So I hope you can bare with me on this.
    I am gonna be shooting weddings mostly with these cams. Actually, it is the price that was very tempting being around $1000. My other option is Canon XF100 which should be around double that price. Anyway here are my questions:
    1. Should I go for Panasonic or Canon XF100?
    2. Knowing that I might need to deliver on BluRay, what resolution should I shoot at? 1080p, 1080i, or 720p or any other res? Compatibilty with PP is important.
    3. Saying I did go for Panasonic which shoots in AVCHD, what format can I convert my footage to, and which converter should I use so I can maintain as much quality as I can?
    I am a PC uder with windows 8 Premiere 6.
    Again, thank you all for the feedback and the time.
    Jonah

  • Panasonic HDC-SD9 AVCHD Camcorder and FCE4

    Hi
    What are the best settings for using my Panasonic HDC-SD9 AVCHD Camcorder for FCE4. I ma based in the UK so would use PAL over NTSC.
    I am looking for the best overall settings for a clean good quality image.
    Thanks for all your help
    RC

    Thanks - what about image stablization and the other features the camera has.
    I'd like it to be a bit point and shoot ideally - also are you aware of any good camera stablization equipment that is compact and not ridiculously expensive for use with this camera - I'd love to get really smooth video footage.

  • How to process Customer Open Items? If that Customer is also an Vendor.

    Hi All,
    I need some help for  the below configuations,
    1. How to process Customer Open Items? If that Customer is also an Vendor to the Company. ( How to adjust these open amounts)
    1. How to process Vendor Open Items? If that Vendor is also an Customer to the Company. ( How to adjust these open amounts)
    Thanks
    Chandra

    Hi Chandra,
    In addition to all the above, if the Customers and Vendors are in different company codes, then, you would have to also do the following configuration.
    Execute transaction code <b>OBYA</b>, when prompted, type in 1st coy code, say A and then 2nd coy code, say B. This would take you to the "<b>Maintain FI Configuration: Automatic Posting - Clearing Accounts</b>" screen.
    In the first frame, where you have
    Posted in : A
    Cleared Against : B
    Under Receivable
    Debit Posting Key : <b>01</b>
    Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
    Under Payable
    Credit Posting Key : <b>31</b>
    Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
    In the second Frame
    Posted in : B
    Cleared Against : A
    Under Receivable
    Debit Posting Key : <b>01</b>
    Account Debit : Account Number (The account can be a G/L account, a customer account or a vendor account)
    Under Payable
    Credit Posting Key : <b>31</b>
    Account Credit : Account Number (The account can be a G/L account, a customer account or a vendor account).
    So, if you are using the Customer/Vendor approach, company A must be set up as both a Customer(Use Txn Code <b>XD01</b>) and a Vendor(USe Txn Code <b>XK01</b>) in Company B and vice versa.
    Once you have completed this set-up, you can then use transaction <b>F.13</b> and/or <b>F13E</b> to carry out your automatic clearing.
    However, if you intend to use the G/L approach, then the account numbers would be Inter-coy G/L account for each coy code as defined in the chart of accounts.
    I hope the above helps.
    Do not forget to award the points please.
    Regards,
    Jacob

  • URGENT - HOW TO PROCESS A BDC SESSION (IN BACKGROUND) FROM INSIDE A REPORT

    Hi All,
    I have a requirement wherein I need to create a BDC session for mass update(from file) of one transaction and check if at all that update has taken place and proceed with the same session for another transaction.
    For this I need to know how to process the session in background in a report, so that if the processing is done, the next set of data to update a different transaction can happen.
    All inputs are welcome and highly valuable to me.
    If someone is unable to intrepret this, I'll detail it again.
    Thanks in advance,
    Vaishnavi Varadarajan

    Hi,
    1.Use RSBDCDRU is an exe pg.With this u can download the logs into local file.
    2.It will create the spool request .from there u can download or print.
    OtherWise:
    Use the code from the link below. U need to provide the session queue id as input and it will download the log to an excel file. U can change it to  ur reqmt.
    Re: BDC
    regards
    kiran

  • How to process each records in the derived table which i created using cte table using sql server

    I want to process each row from the CTE table I created, how can I traverse from first row to second row and so on....
    how to process each records in the derived table which i created using  cte table using sql server

    Ideally you would be doing a set based processing rather than traversing row by row as thats more efficient. To answer it specific to your scenario we may need more info. Can you explain with some sample data your exact requirement?
    Please Mark This As Answer if it solved your issue
    Please Mark This As Helpful if it helps to solve your issue
    Visakh
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • How to process pdf file in clower ETL

    Hi,
    I want process pdf document in clower ETL dataintegartor. I have created sample project and created ETL garph universal data reader, data i have imported pdf file, while openning the metta data information it's show encoding data format and invalid delimiter and while running error in the console
    Please assist me how to process pdf file with unstructured data format.
    I am getting below the error,
    ERROR [WatchDog] - Graph execution finished with error
    ERROR [WatchDog] - Node DATA_READER0 finished with status: ERROR caused by: Parsing error: Unexpected record delimiter, probably record has too few fields. in field # 1 of record # 2, value: '<Raw record data is not available, please turn on verbose mode.>'
    ERROR [WatchDog] - Node DATA_READER0 error details:
    org.jetel.exception.BadDataFormatException: Parsing error: Unexpected record delimiter, probably record has too few fields. in field # 1 of record # 2, value: '<Raw record data is not available, please turn on verbose mode.>'
         at org.jetel.data.parser.DataParser.parsingErrorFound(DataParser.java:527)
         at org.jetel.data.parser.DataParser.parseNext(DataParser.java:437)
         at org.jetel.data.parser.DataParser.getNext(DataParser.java:168)
         at org.jetel.util.MultiFileReader.getNext(MultiFileReader.java:415)
         at org.jetel.component.DataReader.execute(DataReader.java:261)
         at org.jetel.graph.Node.run(Node.java:425)
         at java.lang.Thread.run(Thread.java:619)
    please can any one help me.
    Thanks
    Rajini C
    Edited by: 954486 on Sep 19, 2012 11:19 PM

    There is a separate forum for the BI/Information Discovery application of Endeca software: Endeca Information Discovery You should post your message there.
    Thanks.
    Sean

  • WMS :  How to Process Sales Order Released before Turning on WMS

    Hello Gurus,
    How to process sales orders released before WMS enable flag is turned on in the  new WMS enviournment in Oracle 11.5.10 ?

    Helios,
    Thanks for the document.
    I m looking for how to perform Pick confirm transactions for already printed Pick slips before WMS enabled flag is turn on for the org.
    One option is to close all the deliveries  but if there is no on hand at that point the they will remain option.
    Other option is to Back order those deliveries and re release them post wms enable flag is turned on... The only issue i see here is that if there are more new orders for one of the items  and the orders are released then which orders will get allocated/reserved if there is limited on hand quantity to statisfy the SO need.
    Let me know if you can think off some alternative solution.
    Apprecite help !!
    Thanks,
    Sam

Maybe you are looking for

  • Problem compiling on my C:

    Please can someone advise: This is a real pain. I have the JRE 1.4.1 and SDK 1.4.1 installed on my Work PC, when I try to compile it gives me the following: "javac: invalid flag: Usage: javac <options> <source files> where possible options include: -

  • SOAP fault - How to log error in response message map

    Hi, I have a scenario ABAP Proxy <-> XI <-> SOAP. Occassionally there is an issue with communication to the destination system and an HTTP 500 Error is returned. I assume this is due to a system related error and it is returned as a SOAP Fault as opp

  • Server Specifications for Interactive Reports on V11

    We are planning on installing Interactive Reports for Hyperion 11 on a Windows server. Does anybody know where I could get the server spec or know what the recommended CPU, RAM and Storage requirements are for IR v11.x.

  • Xorg - help with rotation on dual monitor setup

    i have two monitors that im trying to get rotated properly but im having some trouble. i think its easiest to list out what i have going on here... 1. im using a BFG nvidia geforce 7600 with the nvidia driver, and everything on the system is up to da

  • Webpage using host name without domain

    Installed 10g successfully but when I try to naviagte the url is only using the computer host name without the domain. I keep getting the DNS_ERROR. If I manually append the domain in the webpage it works. Installed on Solaris 10.