How to Produce AC3 audio with video to play surround sound  5.1 on an AppleTV

I have produced a short video with a SONY video camera that records AVCHD in AC3 surround 5.1.
When I edit it in FCP I can see the six channels both beside the time code and to the right of the time line.
When I go to share the video to my iTunes library, it indicates that the output will be stereo or two channel.
I have also tried this in COMPRESSOR and selected the various Apple settings. These too only produce stereo out put.
Can anyone suggest what might be preventing the AC3 output?
Thanks
Barry

I think that you are out of luck as the table shows on page 62 of your manual at http://www.docs.sony.com/release/BDPS350_US.pdf
Note 1 on this table says "When Audio Output Priority is set to stereo analog, LPCM 2ch signals are output from each jack.  I would check this setting.  I would also check out notes 2 and 4.  According to their own table, the player should output bitstream in 5.1 D or DTS.
Out on http://www.avsforum.com/avs-vb/showthread.php?t=1046952&page=3 it appears that another person is having the same issue and someone recommended this:
Double check the following settings:
Audio Output Priority: HDMI
Audio HDMI: Auto
BD Audio Setting: Direct
Audio ATT: Off
Dolby Digital: Dolby Digital
DTS: DTS
Audio DRC: Standard
Hope this helps....
I do not work for Best Buy and am not affiliated with them in any way. I like HT and want to help people improve their HT experience. "There is a LOT more than just having a TV to make a home theater"

Similar Messages

  • No audio with video while playing in iTunes.

    As topic says.

    had the same problem...recently upgraded itunes, now video did not play audio.
    Found this info on the web, and it solved my problem:
    http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/r10 04/44r04/44r04.asp&guid=
    "Problem: You have the latest version of iTunes and QuickTime and you still don’t get audio from iTunes.
    Solution: Open the QuickTime Player and go to the Edit menu to choose Preferences, then QuickTime Preferences. Click the resulting dialog box’s Audio tab, then select the Safe Mode (waveOut Only) checkbox. Click Apply, reboot your system and try playing media in iTunes again."

  • How do I synchronise audio and video with an mpg file created in elements 11 ?

    How do I synchronise audio and video with an mpg file created in Premier Elements 11 ?
    The source files are VOB files, and there is no problem with those source files.  But after creating the mpg file, the audio can be out of sync by 1 second or even 10 seconds, and sometimes zero seconds (ie perfectly OK).  That varies.  The variation might be linked to some of the VOB files.  ie. some are OK, and some are not.
    Can I fix this automatically in Elements 11, or am I doing something wrong ?

    Hartwood,
    First, Premiere (both Pro and Elements) do not handle MPEG Audio perfectly - they like some files, but not all files with MPEG Audio. That makes a VOB a less-than-perfect source file. Still, with a bit of work, one should be able to edit it just fine. One of the factors is that there is a very slight block-size difference between the Encoded Video Stream and the Encode Audio Stream in a muxed MPEG-2 file. That often does not play into things, but can cause slight OOS (Out of Sync) issues. Also, both Premieres need to create all I-Frame files for the Video Stream, which is in GOP (Group of Pictures) structure, so what one sees on the Timeline is really a proxy of the MPEG-2 file's Video Stream. The Audio Stream must also be Conformed to PCM/WAV @ 48KHz 32-bit floating point, to be edited. That Conforming is perfect when one has PCM/WAV @ 48KHz 16-bit for the Audio Stream, but requires more work, when the Audio Stream is MPEG (one reason that some MP3's do not work well in Premiere). Several factors involved here, and a fair amount of work for the program. That is why DV-AVI Type II w/ 48KHz 16-bit PCM/WAV Audio works so perfectly.
    Now, fixing OOS might be easy, or might require a bit more work. This article goes into some workflows, that might be helpful: http://forums.adobe.com/thread/436751?tstart=0
    I can feel your pain, as I almost went crazy trying to fix OOS in a client's Project. They ONLY had the finished DVD, from which to work. The disc met the DVD-standards, so everything ripped/Imported fine, and when the simple edits were done (IIRC, there were four scenes, that had to be shortened, and then several Titles added), everything played fine in the Timeline. However, when I Transcoded that Timeline to be authored in Adobe Encore, two scenes went OOS. I went back to Premiere, and checked - all perfect there. I tried to judge the number of Frames that the Audio was out, in those scenes, and nudged them, tested, nudged, tested, and no matter what I did, I could never get the output files perfect, when Imported into Encore for authoring to DVD-Video. I tried DV-AVI, and letting Encore set the Transcoding automatically (usually a great way to work), I tried manually setting the Transcoding in Encore. I tried outputting to MPEG-2 from Premiere, and Importing that. No matter what I did, those two scenes were just OOS, and I could not even seem to improve them - it was like they were just locked OOS. I finally did some more editing, to break things up a bit, added a cut-away shot here, and there, and minimized the perceived OOS, but could never get it perfect. It was like trying to pick up quicksilver with a pair of tweezers!
    Good luck,
    Hunt

  • Best way to sync (shift to match) audio with video in FCE 1.01?

    What is the best way to sync (shift to match) audio with video in FCE 1.01?
    Step by step in simple wording please, since I am new at this.
    Thank you so much.
    Walter

    As you probably know by now, DVD camcorders are not compatible with FCE or pretty well any other DV based editing system.
    Possibly the simplest (though not cheapest) route would be by using an Analogue-Digital converter.
    Streamclip and other similar programs are supposed to work but I have had no experience with them.
    In the long run probably the best (but costly) solution would be to buy a Mini-DV camcorder - it doesn't have to be a top of the range model - even the cheapest ones can produce high quality video. Then you would not have to mess around converting DVD files with the inevitable loss of quality it entails.
    A cheap DV camera need be not much more expensive than an A/D converter.
    Ian.

  • Set DVDSP 4 to produce AC3 audio

    Is there a way to set DVDSP 4 to produce AC3 audio?
    If not, could I import into Quicktime and export in that format?
    I have a large video file and an AIF file of 1.11GB. I have looked and cannot seem to find any way to change the audio output.
    Compressor is out of the question as it will not connect to background processing, hasn't done it for a while.
    Thanks

    Which update? My compressor (and Quicktime, for that matter) conversions all starting to hang, crash, or otherwise misbehave when I installed iLife '09 and it software udpates. I finally got back to sanity by doing the following to my misbehaving systems:
    1. Download and install the 10.5.7 Combo update (my system had already been so updated, but I reapplied the update).
    2. Download and install Quicktime 7.6 (again, over the same version I already had).
    3. Download and install "ProApplicationsUpdate2008-05" (that I likewise had already installed)
    Then my Compressor and Quicktime issues seemed to just go away. Oh, and between each of the updates, I did a "repair permissions" and reboot. My iLife '09 stuff seems to work (I really just wanted iPhoto and iWeb updates), as does FCS 6.0.5 and Compressor 3.0.5.
    Just started a new FCS project (HDV tape to ProRes 422, compress (frame on) to mpeg2, ac3 (stereo) for DVD S4, also to mp4 for web use and it all worked fine.
    Eddie O
    Message was edited by: Edward A. Oates

  • No audio with video, website navigation impaired, I can no longer recommend Firefox

    I maintain the video site shaleshockmedia.org. I can no longer recommend Firefox to viewers because of the severe problem I have been experiencing: No audio with video; navigation often does not work. Maybe this is purely a local problem. Please let me know if the site is fully functional or not when you go there. There is no problem with Chrome or Safari. My computer is a Macbook Pro 3,1 Intel Core 2 Duo. MacOs 10.6.8

    Note that there are a lot of popular extensions that can cause issues with videos not working apart from issues with the Flash plugin.
    In what way is the navigation not working properly?
    Can you give some examples?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Check for problems with current Flash plugin versions and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting

  • I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...

    I recorded audio with Quicktime player and the sound files won't disappear from the desktop no matter how I try to put them in the trash...tried xing out the red x, putting them in the trash...right clicking to make them disappear...nothing works...

    Just got rid of them... I closed Quicktime and was asked to delete. So I deleted them. Problem solved.

  • How do I synch the audio and video to play together in iMovie? And why is it not synched?

    My iMovie the video is not synched to the audio.  It could be about two seconds off.  And sometimes the sound just stops. I tested it on Quick Time Player and burnt it to a dvd and it does the same thing.  The sound then stops halfway through besides my ilife sound effects.  How do I synch the audio and video to play together in iMovie and dvd?  I taped the movie from my digital camera and it hasn't done this on imovie before. Any Help?

    This may help:
    iMovie: Improving audio and video synchronization
    http://support.apple.com/kb/TA25603?viewlocale=en_US

  • Syncing External Audio with Video on iMovie

    If syncing external audio with video on imovie, once successfully syncing the 2 is it possible to permanantly merge them so that I can continue trimming and rearranging clips without having to continue to re-sync the audio and video after every change I make?

    In Final Cut Pro X, yes. In iMovie...no.
    The workaround in iMovie is to sync your external audio to the video clip. Mute the audio on the video clip so all that is left is the good audio. Then use SHARE/EXPORT TO QUICKTIME. Choose Movie to QuickTime Movie and under Options choose Apple Intermediate Codec as the Video Codec.
    Then save this clip in a place you can find it. Finally, import this new clip back into your event.

  • How to isolate one audio or video track?

    How to isolate one audio or video track? My premiere pro cc will only allow me to grab all 8 audio tracks and the video tracks at once when i import it and bring them into the timeline. When I click on one it highlights them all.

    It helps to indicate what version of Premiere you have and whether you're on Mac or Windows.
    If you're on 7.0.1 or later, then disable the Linked Selection button in the Timeline. It's the button to the right of the magnet (Snap). If you frequently want to toggle between linked and unlinked selection, you can assign a shortcut to the command
    Also, you can select any track item by holding ALT while clicking. To select multiple individual track items (e.g., A3, A5, & A7 for a given clip), hold ALT+SHIFT while clicking.
    And I believe Sarthak meant "Unlink" rather than "Ungroup." A/V clips are linked by default, so Unlink is generally available. Ungroup will be available only if what's selected is a set of clips that you manually grouped.

  • TS1382 does the latest ipod classic play audio with video on an alpine ive-w530abti head unit

    does the latest ipod classic play audio with video on an alpine IVE-W530ABTi head unit

    According to the compatibility chart on this page, yes it does.
    http://www.crutchfield.com/S-OhTD03kplzN/p_500IVEW530/Alpine-IVE-W530.html#detai ls-tab
    B-rock

  • HT5117 I am producing an ibook with video and jpg images, what sizes should they be?

    I am producing an ibook with video and jpg images, what sizes should they be?
    <Image Edited by Host>

    I and others answered a similar question only  yesterday.
    There are also many other similar posts and it is advised we first check out "our"  problem by doing a search.
    I also  suggest you download "iBookstore Asset Guide 5" its a pdf and contains all the  information you  ask for.

  • How do I get a m4v video to play on my Mac Pro computer?

    How do I get a m4v video to play on my Mac Pro computer?

    Have you tried VLC? That can play virtually any media format.

  • As apple does not support Adobe flash how do I watch youtube other  videos and play games?

    As apple does not support Adobe flash how do I watch youtube other  videos and play games?

    There is a YouTube built-in app for watching those videos. If you can't find the app (it can't be deleted), then check that it's not hidden via Settings > General > Restrictions > YouTube.
    For videos on other sites then you might find that some of them (probably more so if they are news sites) have their own apps in the App Store which might let you get some of the content that you want (and there is the built-in YouTube app). Also there are browsers such as Skyfire which 'work' on some sites - but judging by the reviews not all sites. If you want to play flash games then you are probably out of luck if you want to play on-line though the iSwifter app might work on some of them, but again some flash games have app versions in the store.

  • How do i actionscript my flash button to play the sound while being transfered to another url?

    Hi!
    As the title says:
    How do i get my flash button to play my sound when i click on
    it while being transfered to another url?
    I did get it to work, but only when i set the script to
    "_BLANK". When i clicked the button then it played the sound and
    opened the url in a new window. I want it to be in the same window
    and still play the whole sound.
    Now i get just 1 or 2 sec then when im transfered, it stops
    playing the sound.
    I hope this explains it..... if any typo....its because im
    Swedish =)
    Thanks in advance!

    If you are jumping to another URL using the same window you
    cannot have a sound start on the press of a button and that sound
    to continue on.
    Reason
    You are removing all trace of the sound and the swf that
    contains that sound file.
    Work arounds
    1.Take a look at "frames". This way you are keeping the
    container page and opening another page inside of that page.
    2. Div's. again you are importing a page into a particular
    area yet keeping the swf, with the sound playing, in the parent
    frame.

Maybe you are looking for

  • Apache FOP Problem with column width

    We are using Apache FOP to generate simple pdf documents out of reports. My problem is that the table in the pdf is as standard filled in with columns of same length. Further on the content of some table fields is to large or sometimes there is to mu

  • ATAPI Incompatible message when booting

    Hi Have just purchased a KTV4 MS6712 board and cannot get the board to recoginise my CD-RW (Sony) and my CD/DVD drives during boot up. I have attached the drives to IDE2 and set the jumpers to Master (CD-RW) and Slave (CD/DVD). When Secondary IDE mas

  • Will ipod touch4 mains charger work with ipod touch5

    I purchased an iPod touch 5 for my little one , I have an iPod touch 4 , can I use the mains wall charger to charge the touch5 with the new lead , or is the only way to charge it through the USB on my laptop

  • Purchase Requistion,Purchase Enquiry, Sales Enquiry,Capacity Planning & Sch

    Hi All, I am working in SAP business One for quiet long time as Functional Consultant and i am very much aware with its design. And Now SAP is bringing SAP HANA also for Mid Size Company or you can say in SAP Business One. BUT ............... In any

  • Transport all Ques Tab strip in Development to production transport system

    By mistake, some one click TRANSPORT ALL QUES Tab strip in Development to production transport system. All objects in development went to production and it is changing the cubes. Is there is any chance to revertback  transportation. Its very Urgent.