How to program favorites with xr2 v3-p remote and HD adapter?

I just connected a HD adapter to my Sony Bravia HD TV. A xr2 v3-p remote was included, but the favorites button doesn't seem to work.

I don't believe Favorites are available on HD adapters. You'd need a full set top box. The Favorites are stored in the box, not in the remote. Can you post the box model number?

Similar Messages

How to program favorites to only show watchable channels

It really aggrivates me that I have to run through a thousand channels most of which I'm not subscribed to. Is there an easy way to program my DVR I guess through the favorites function to show only channels I get?
I mean really I there are a heck of a lot of channels that I dont want and dont get but get caught every time I click on a channel just to be told I need to subscribe. I only want listed what I can watch, is there an easy way of doing that?

Sure. I am in the process of trying to write up a fairly complete procedure to be posted here, but in the meantime here is the part about setting up your favorites list:
The first step is to create at least one Favorites list, either Favorite 1 or Favorite 2:
Menu ==> Settings ==> Favorite Channels ==> Favorite 1 ==> Add/Remove Channels ==> channel list
Go through the entire list of channels, adding any channels you want by pressing the OK key. There are some keys you can use to make this process easier and faster:
Use the Up Arrow or Down Arrow to move through the channel list one channel at a time.
Use the Channel + and Channel - button to move the channel currently visible at the bottom of the list to the top of the visible list (move forward or backward in the list about 10 channels at a time).
Press any number key combination to move forward or backward from your current position in the list. Some examples:
Press the 0 key to get to the top of the channel list
Press 500 to go to the first HD channel in the list
Press 9999 to go to the bottom of the list
Once you are positioned at the channel you want to add to this Favorites list, press OK (if you make a mistake or change your mind, press OK again to remove the channel from the list)
Next, update how the buttons on the remote work.
The Favorites Button option controls what you see when you hit the Favorites button on the remote:
Show Favorite Listings: When you hit the Favorites button, you see Favorite 1 (or 2), and when you hit the Guide button you see the full list of all channels.
Toggle Flip by Favorites: When you hit the Favorites button you do not see a Favorites list, instead you see a small display in the upper right part of the screen showing what hitting the Guide button will display: one of the Favorites or the full Guide. Repeatedly hitting the Favorites button will rotate through the options: Favorite 1 (if the list exists), Favorite 2 (if the list exists), and All Channels, back to Favorite 1, etc.
The Flip by Favorites option determines which list shows up by default when you press the Favorites button:
All Channels
Favorite 1
Favorite 2
My preference is to set Favorites Button to Toggle Flip by Favorites and Flip by Favorites to Favorite 1; this way, hitting the Guide button causes my Favorites 1 list to appear, and hitting the Favorites button allows me to change which list appears when I hit the Guide button.
The net effect of the above is that by default I see my favorites when I hit the Guide button, but I can easily change that to all channels at any time.
The above is not fully edited or complete yet, but maybe it will help you get your Favorites set the way you want them.
Hope this helps.
Justin
Verizon FiOS TV, Internet, and phone
IMG 1.6.0, Build 06.89
Keller, TX

How do delete cookies with ios7 on I-phone and I-pad ?

How do you delete cookies with ios7 on I-phone and I-pad ?

Cheers for that but what I really meant was when you double click your home button you used to be able to keep your finger on one of the apps for 2 seconds and they all would have a cross on them and you could delete them now you can't ? , not delete the app completely just close the app properly to save your battery

How to program a new tv into the remote control

We just bought a new tv and need to change the remote control to the new tv. How do I do that?

on your set top box press menu > customer support > in home agent > program remote and follow the instructions. :]

How to attach file with an email in travel and expenses

Hi Experts,
I am new to sap cloud application studio.
We have requirement that need to attach any type of files in the mail,
I have gone through this : How to send an email with attachments in SAP Cloud Application Studio
But compilation error at import AP.FO.ACTIVITY.GLOBAL., so not able to work with that lines of code.
I am using these lines of code to send email.
EMailUtilities.SendEMail(lang, bcc, cc, toAddress, htmlContent, from name, subject);
So am not able to getting how to attach file with this code.
Please help me regarding this.
Thanks & Regards,
Preethi Ande

Hi Preethi,
I am trying to send mail from custom BO in Travel on Demand System.I am getting compilation error.please look into the attached screenshot for the code.
Please assist me on this, Thanks in advance
regards,
Sendhilazhagan

How to play movies with different ext like wmv and...

need to know how to play movies with various ext like wmv..mpeg..vlc on e7

If the phone's built-in video player does not handle those formats, your option are:
- find some other video player app that does, or
- convert the videos to a supported format
The E7 supported video formats are listed on, e.g., this page:
https://www.developer.nokia.com/Devices/Device_specifications/E7-00/
Hit "Expand all" and scroll down to "Video Playback Formats".

Compatibility of Griffin Navigator with iPhone earphones w remote and mic

Hello,
Was ready to purchase the great Griffin Navigator remote and FM receiver, but was wondering if it was compatible for phone call thru the earphones using the earphone mic????
Did some of you experiment it?
However, I am looking fo a remote and FM receiver that will allow using the earphones mic for calls.
Thank you in advance

I highly doubt that, those headphones were created for the new shuffles.
but you can probably use them for an iphone or your cell phone with an adapter unless the jack fits.

How to program VC++ with AT-GPIB-TNT

I am a student in Taiwan and a beginner user in GPIB.
I am writing a control program in Visual C++(console) on Win98 (by N.I. GPIB-TNT
board).
I need to control two devices one is Laser interferometer for measurement,
another is PZT(piezo actuator).
When I execute a simple read and write program,
it always shows " can not read ".
I am so confused.
Can you help me to overcome this problem
and show me a new simple program?!
Thank you very much.....
I am so appreciate for your help.
best regards
Andrew

Andrew,
From the bottom of http://www.ni.com/support/trouble/gpib/max/ibic.htm, there is
a link to "Solutions to Common Errors." If you follow that link, the next page will
have an entry for the EABO error code (and several other error codes). These tips
are the suggestions that our support staff would make to you if you were to speak
with them. I suggest checking that link out. I have posted this message to the
newsgroup for the benefit of all readers.
Regards,
Rich
NI
Thanks for your help.
After receiving your mail, I try to follow the step.
But when I use "ibrd", it has the error code as follow
iberr = EABO
EABO indicates that an I/O operation has been canceled, usually due to a
timeout condition after a GPIB read.
Before reading from the instrument, verify that the GPIB command you are
sending is understood by your device
and instructs it to place data in its output buffer.
device data as follow
Board: GPIB0 AT-GPIB/TNT
Device: Name Type
Value Description
instrument0 Instrument is not 488.2 compatible pad=2 GPIB
instrument
instrument1 Zygo, VMEbus control board pad=3 GPIB
instrument
My goal just want to read the measuring data from laser device by
AT-GBIP/TNT board.
Need your help again thanks.
Andrew
> Andrew,
>
> What you may want to do, instead of starting off with straight
coding, is
> to see if you can establish communication with the instrument using
"IBIC," our
> interactive diagnostic tool for instrument control. This program comes
> installed with your 488.2 driver.
>
> To find out more about this, visit
> http://www.ni.com/support/trouble/gpib/max/ibic.htm . If you can achieve
> communication with your instruments with this program, you're well on your
way.
> If you cannot, the website has solutions to common errors that one can see
while
> using this tool.
> ps. "threads" refer to the number of processes running at once. For
example,
> if you can do two separate math operations simultaneously in your program,
> that's a multithreaded application.
> "andrew" on 04/24/2000 03:51:13 AM
> I am a student in Taiwan and a beginner user in GPIB.
> I got your e-mail address from your post on N.I. user newsgroups.
> I am writing a control program in Visual C++(console) on Win98 (by N.I.
GPIB-TNT
> board).
> I need to control two devices one is Laser interferometer for measurement,
> another is PZT(piezo actuator).
> When I execute a simple read and write program,
> it always shows " can not read ".
> I am so confused.
> Can you help me to overcome this problem?
> And show me a new simple program!
> Thank you very much.....
>
> I am so appreciate for your help.
>
> best regards
> Andrew
>
> Ps.what is singlethreaded and multithreaded?

How to program Listener with arguments

Hi, I want to program a generic Listener to respond to different calling programs. How do I pass an argument to the Listener?
I have
public class myNavigationBarListener implements NavigationBarButtonClickListener{}
When I added
public class myNavigationBarListener (int i)implements NavigationBarButtonClickListener{}
it won't compile, thanks in advance.

I have the following class that implements an action listener.
public class ComboBoxDefaultEditor extends JComboBox implements TableCellEditor, ActionListener, JComboBox.KeySelectionManager {
Then in the constructor:
public ComboBoxDefaultEditor(RowSetInfo ComboRowSet, String FieldName) {
Hope this helps!
Linda
null

How to program Sony RMT-VB100U Blu-Ray remote to control Vizio TV

I want to eliminate some remote controls...I have a Vizio TV and want to turn it on/off and adjust volume via my fancy little Blu-Ray remote Sony RMTV-B100U that came with my BDPS3500, BUT the pre-programmed brands do not include Vizio. How do I make this remote work with the Vizio, or am I just screwed and need to buy a tool belt to carry all these ****** remotes around? I'm not buying a universal remote when I have plenty of remotes that should do the job.

Hi nphiker,
Welcome to the Sony Community!
The supplied remote " RMT-VB100U " is not a universal remote control. However, you can control some televisions which is not a Sony TV. Please refer to the link below on page 44 for the supported TVs.
https://docs.sony.com/release/BDPBX350_EN.pdf
If my post answers your question, please mark it as "Accept as Solution"

How to run procedure(with paramater other than errbuff and retcode) through

Hi everybody,
This is Ram. I'm comfortable while running a procedure through concurrent program. but getting error when trying to run a procedure with parameter. Plz let me know the process (if possible example) of running a pl/sql procedure(with parameter) through concurrent programs..
Regards,
Ram.

Hi
It's difficult to know exactly what to modify to have no errors as those are not specified. However, the rule of thumb is for a procedure to be used as a concurrent program:
procedure conc_prog(
errbuf out varchar2
, retcode out varchar2
, param1 in varchar2 -- all additional parameters must by of IN type
, paramn in varhcar2 ) ;
On the concurrent program definition form, add the parameters from the third one, errbuf and retcode don't neet to be defined. Be careful on datatypes as date an numbers may have format mask problems when passed to your procedure and more possibility for this to happen is more than one language is installed. A safe way to pass those values would be to define parameters as varhchar2 and in your code, define a variable of the right type to use and assign the received value with the format mask defined for the value set associated to the parameter.

How to populate SNDPRN with different values in Development and Production?

Hello experts,
I have to fill the field SNDPRN in the message mapping with a different value in Development and in Production. As I am new to PI, I used a simple solution - but it is rather ugly: I set a constant value in the mapping in development and a different one in Production. However, I would like to know if there is any solution to have a condition in the mapping like:
IF system is Development, set SNDPRN as Constant1.
IF system is Production, set SNDPRN as Constant2.
(And eventually IF system is Test, set SNDPRN as Constant3)
Thanks in advance for your help,
Luis

Hi Luis,
      You can go with the parameterized mapping , where you can provide different values for SNDPRN in interface determination for development and production.
      At point of time if you want to change the values it requires only a change in the configuration.
      Please refer the below links for reference;
Parameterized Mapping Programs - Enterprise Services Repository - SAP Library
http://scn.sap.com/people/jin.shin/blog/2008/02/14/sap-pi-71-mapping-enhancements-series-parameterized-message-mappings
     We are following the same approach for some of our interfaces.
- Muru

How to load file with 500M into noncontiguous memory and visit them

My data file consist of a serial of 2d images. Each image is 174*130*2 butes and the total images in the file is up to 11000, which takes almost 500M bytes. I hope to load them into memory in one turn since I need to visit either image many times in random order during the data processing. When I load them into one big 3d array, the error of "out of memory" happended frequenctly.
First I tried to use QUEUE to load big chunk of data into noncontiguous memory. Queue structure is a good way to load and unload data into noncontiguous memory. But it dosn't fit here since I may need to visit any of the all the images at anytime. And it is not pratical if I dequeue one image and enqueue it into the opposite end, since the image visited may be not in sequential order.
Another choice is to put the whole file into multiple small arrays. In my case, I may load the data file into 11000 small 2d arrays and each array holds the data of one image. But I don't know how to visit these 2d array and I didn't get any cues in the posters here.
Any suggestion?
PC with 4G physical memory, Labview 7.1 and Win XP.
Thanks.

I'll try to get the ball rolling here -- hopefully there's some better ideas than mine out there.
1. I've never used IMAQ, but I suspect that it offers more efficient methods than stuff I dream up in standard LabVIEW. Of course, maybe you don't use it either -- just sayin'...
2. Since you can't make a contiguous 11000-image 3D array, and don't know how to manage 11000 individual 2D arrays, how about a compromise? Like, say, 11 3D arrays holding 1000 images each?   Then you just need ~50 MB chunks of contiguous memory.
3. I'm picturing a partially hardcoded solution in which there are a bunch of cloned "functional globals" which each hold 1000 images of data.  This kind of thing can be done using (A) Reentrant vi's or (B) Template vi's.  You may need to use VI Server to instantiate them at run-time.
4. Then I'd build an "Action Engine" wrapper around that whole bunch of stuff. It'd have an input for image #, for example, image # 6789. From there it would do a quotient & remainder with 1000 to split 6789 into a quotient of 6 and remainder of 789. Then the wrapper would access function global #6 and address image # 789 from it.
5. Specific details and trade offs depend a lot on the nature of your data processing.  My assumption was that you'd primarily need random access to images 1 or 2 at a time.
I hope to learn some better ideas from other posters...
-Kevin P.
P.S. Maybe I can be one of those "other posters" -- I just had another idea that should be much simpler. Create a typedef custom control out of a cluster which contains a 2D image array. Now make an 11000 element array of these clusters. If I recall correctly, LabVIEW will allocate 11000 pointers. The clusters that they point to will *not* need to be contiguous one after the other. Now you can retrieve an image by indexing into the array of 11000 clusters and simply unbundling the 2D image data from the cluster element.

How build a function with an array in input and another array in output

Hi, I need to create a function, which receive in input a list of Group's name and retrieve the correspondent list of Group's id.
So I need to have these conditions:
1) The parameter in input has to be only one "p_user_name" (an array of values)
2) the return parameter has to be p_user_id (array of values)
3) in the WHERE condition p_user_name has to be used in order to retrieve the list of user_id I need
Following, a little example:
FUNCTION get_group_id (p_user_name IN VARCHAR2) RETURN p_user_id
IS
BEGIN
SELECT group_id FROM jtf_rs_groups_vl
WHERE group_name = p_user_name
RETURN p_user_id;
END get_group_id;
I think I have to create a new type with p_user_name, but I don't know after, how to join group_name (varchar2) with p_user_name.....
Anybody can help me to find the light ?
Thanks in advance
Alex

I need to create a function, which receive in input a list of Group's name and
retrieve the correspondent list of Group's idAt the beginning the argument "p_user_name IN VARCHAR2" is not what you need. You should create global type - nested table of varchar2 values where you
can keep the list of names. And you also need to create nested table of numbers
to return IDs (if you really need collection but not ref cursor !):
SQL> select empno, ename from emp;
     EMPNO ENAME
      7369 SMITH
      7499 ALLEN
      7521 WARD
      7566 JONES
      7654 MARTIN
      7698 BLAKE
      7782 CLARK
      7788 SCOTT
      7839 KING
      7844 TURNER
      7876 ADAMS
      7900 JAMES
      7902 FORD
      7934 MILLER
14 rows selected.
SQL> create type d_v is table of varchar2(10);
2 /
Type created.
SQL> create type d_n is table of number;
2 /
Type created.
SQL> create or replace function get_ids
2 (names d_v) return d_n
3 is
4   ret_ids d_n;
5 begin
6   select empno
7   bulk collect into ret_ids
8   from emp, table(names) t
9   where ename = t.column_value;
10   return ret_ids;
11 end;
12 /
Function created.
SQL> declare
2   d d_n;
3 begin
4
5   d := get_ids(d_v('KING','ALLEN'));
6
7   for i in 1..d.count loop
8    dbms_output.put_line(d(i));
9   end loop;
10
11 end;
12 /
7839
7499
PL/SQL procedure successfully completed.Rgds.

Err. in programs copiled with Jdev 9.0.3 and run with Java Web Start

Hi all,
when I build my programs with Oracle9j JDeveloper 9.0.3.988 and I use them with Java Web Start, programs do not run, while when compiled with Oracle9j JDeveloper 9.0.2.x it runs without problems.
The Java version used in both cases is 1.4.0.
Here's an example of the log from Java Web Start:
Error in JavaWeb Start
viewer/imageViewer/ViewerAppState$1 (Illegal Variable name " val$files")
java.lang.ClassFormatError: viewer/imageViewer/ViewerAppState$1 (Illegal Variable name " val$files")
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:502)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
     at com.sun.jnlp.JNLPClassLoader.defineClass(Unknown Source)
     at com.sun.jnlp.JNLPClassLoader.access$1(Unknown Source)
     at com.sun.jnlp.JNLPClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sun.jnlp.JNLPClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:299)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:255)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:315)
     at viewer.imageViewer.UtilityMenuPane.jbInit(UtilityMenuPane.java:167)
     at viewer.imageViewer.UtilityMenuPane.<init>(UtilityMenuPane.java:155)
     at viewer.imageViewer.UtilityMenuPane.getInstance(UtilityMenuPane.java:147)
     at viewer.imageViewer.ImageViewerFrame.jbInit(ImageViewerFrame.java:179)
     at viewer.imageViewer.ImageViewerFrame.<init>(ImageViewerFrame.java:145)
     at viewer.imageViewer.ImageViewerFrame.getInstance(ImageViewerFrame.java:126)
     at viewer.ImageViewer.execute(ImageViewer.java:30)
     at viewer.Viewer.execute(Viewer.java:63)
     at viewer.Viewer.<init>(Viewer.java:27)
     at viewer.Viewer.main(Viewer.java:40)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sun.javaws.Launcher.executeApplication(Unknown Source)
     at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
     at com.sun.javaws.Launcher.continueLaunch(Unknown Source)
     at com.sun.javaws.Launcher.handleApplicationDesc(Unknown Source)
     at com.sun.javaws.Launcher.handleLaunchFile(Unknown Source)
     at com.sun.javaws.Launcher.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:536)
Does anybody know why this happens?
Thanks

Hi There.
We had the same problem with some of our code. We moved the definition of the class from a method out of the method. Like this:
public class{
class{
instead of doing this:
public class{
method() {
class{
This worked with the web start......
Best regards
Jesper Lorentzen

How to program favorites with xr2 v3-p remote and HD adapter?

Similar Messages

Maybe you are looking for