How To Program  Function(F1..F12)a Control Key ( Del..)of Keyboard FORMS6i

Please how to program a Function (F1..F12) & a Control Key ( Del,Esc,Key+,....) of Keyboard in FORMS6i.
Thanks of your Help.

You can override the default functionality of F-keys with the Key-F0-9 triggers without having to modify the frmweb.res file.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Similar Messages

  • How to remap volume control keys on aluminum keyboard?

    I want to remap my volume control keys (increase, decrease and mute toggle) to F16, F17, and F18 on my new aluminum keyboard. But I can't figure out how to do this. I called AppleCare tech support and was told that volume key location is hardwired into the keyboard. Say it ain't so! There's got to be a way, right?
    Help?
    thank you!

    I second this, I still think this was a poor decision on Apple's part. I loved real media keys, this is not a laptop keyboard, (Fn)+(..) should not be necessary. My real complaint comes from IF i can get it to remap in OSX i am still stuck with it as is in Bootcamp. No remapping programs work with (Fn) in XP.
    Sorry for the rant but I have actually stopped using the keyboard because of this and finally went back to it to try again.

  • How to incorporate Command,Option,Shift and Control keys into AppleScripts?

    How do I incorporate Command,Option,Shift and Control keys into AppleScripts?
    for example:-
    If Control key is depressed then
    do something
    elseif Option key is depressed then
    do something else
    end if
    Lennox

    I am trying to do this:
    tell application "Finder"
    set cv to current view of Finder window 1
    if ( option key down of theEvent ) then
    set current view of Finder window 1 to list view
    elseif ( control key down of theEvent ) then
    set current view of Finder window 1 to column view
    else
    set current view of Finder window 1 to icon view
    end if
    end tell
    but since I am not quite familiar with this I am not getting it right
    Any suggestions?
    Thanks.
    Lennox

  • How to change the Purchase requisition when control key is PP02

    Hi Exports:
      I want to change the  purchase requisition which was created after  production order was  released . The  control key is  pp02.
      I  changed the purchase requisition in OPJP .but I got an error .
      the error message is
      " Acct. assign. cat. "Q" for purchase req. Project Stock does not exist. "
      I don't know what should I do . would you like to give me some advice? thank you  very much.

    Hi, Umesh:
         Picture1 is  my OPJP initial screen ,I want to change to be Picture B . but I got an error .
         In fact , I  don't have project stock . but I have sales order stock.
         I try to change 'Q' to other option . but I got the same error.
    picture 1
    picture 2

  • Control key from Windows keyboard

    Hello
    I use VNC to remote control my mac mini (OS X 10.4.10) from my Windows laptop. However I cannot figure out how to emulate the Mac Control key from my Windows keyboard.
    This is needed because I have multiple iTunes libraries on the mini, and on the Mac keyboard, you can ctrl-click the iTunes icon in the dock to select which library to open. When I'm on VNC controlling the Mac, the ctrl key on the Windows keyboard apparently does not equal the Mac ctrl key.
    Alt on the Windows keyboard maps to the Command (Apple) key on the Mac keyboard, but Control doesn't seem to correspond.
    Thanks

    It seems I made a mistake on which key I need to selectively open a particular library when launching iTunes. It is the "Option" key on Mac, but I still can't find the proper key combination to do this when I VNC into the mac from Windows.
    Thanks

  • My volume control keys on my keyboard are not working.

    All of the keys on my keyboard are working except for the f10, f11, and f12 keys (those which control the volume). I have tried to fix this problem in system preferences but can't seem to find a place to fix the problem. I have a macbook pro.

    try a pram reset
    Resetting PRAM
       Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Control key combinations in Keyboard Shortcuts

    I want to use the Control key plus letters, such as Ctrl-H, for shortcuts within Keyboard Shortcuts. I appreciate that such combinations are normally used by EMACS but I fail to understand what's happening in the Keyboard Shortcuts section of my Keyboard panel in System Prferences. It allows me to enter the Control key plus letter as my required shortcut but the shortcut never works. Any other shortcut, using other modifiers, even in combination with the Control key works fine. Now I have other utilities, such as FastScripts and Spark that allow me to use such combinations, so why can't they be used in Keyboard Shortcuts?
    If anyone else has this problem and knows of an answer it would be much appreciated!

    Well, the Keyboard Shortcuts panel doesn’t show the warning triangle as shown for other conflicts. Shouldn't the panel reject such key combinations if they're not available? Instead it shows them as being OK. I would have thought it reasonable to use such key combinations in non-EMACS applications anyway. Also, why is it that other utilities make it possible to use them? Most odd. I'll just have to use other methods I suppose!

  • How to program my ATT remote to control volume on my Samsung Smart TV

    I am only able to change channels on my Samsung smart TV via my AT&T remote. I would like it to control the volume as well but have been unsuccessful at being able to get the volume programs on the ATT remote.

    This is more complicated now with the S-20 remote. You must have an s-10 because you cannot change TV channels on an s-20. MAybe you meeant you caan change u-verse channels.
    If you have an old s-10 with mode buttons the volume on the TV in all modes is the default after programming the TV. So, if yo do not have tv volume control, you have not yet found the correct code. If you want to start from scratch, the factory defaul program is att/ok -900.
    If you have a new s-20, without mode buttons, the default is STB volume control. You need to change it. Here are the directions - http://www.att.com/esupport/u-verse/remotes/

  • How to move between applications in Mission Control using non-english keyboard?

    I have recently started using MC and really like it. I prefer doing as much navigation as possible from the keyboard.
    I can do most of the things I want to with MC but I have not been able to find out how to switch between open applcations on the selected Desktop while in MC.
    I have tried searching for a solution online without success. To begin with it would be great if it is at all possible but preferably, it would be something that could be configured by me in System Preferences/Keyboard.
    I would think that other people would want to do somehting similar so hopefully there is a solution.
    Thanks in advance,
    Thor

    Hold down the cmd (⌘) key and briefly press the tab key (⇥) then use the left/right arrow keys to select the application you wish to switch to.  When done release the cmd key.

  • How to switch off the computer using the key on the keyboard?

    Hi,
    i've been using Mountain Lion for a while on my MBPr and when I wanted to switch off my mac, I used the key on the dashboard, then it asked me whether I wanted to switch off, restart or go on sleep mode... Now though with Mavericks, this button only makes it go on sleep mode...how to change the function of this key, in order to switch the computer off instead of sleep mode or how to get the window asking me what to do back?
    Thanks,
    BadGoldEagle

    It's a laptop, and when I don't use it i put it in a case and hide it (I've been burgled several times and I don't want to lose my Mac...
    About my friend: He was using his laptop when he had to go out (groceries....) and because he was in bed, he left it under his blanket to hide it form view... he put his computer to sleep. Unfortunately, windows update noticed something needed to be updated and switched back on the computer and during the update, it became kinda hot and it burned the CPU... bad...
    You'll understand I don't want to do that to my mac...
    And now all i have to do is wait 'till Apple brings an update to fix that...

  • How to create a keypress event for ANY key on the keyboard that is pressed ? (not a specific key.)

    I realise that if I use:
    if (e.which == 81) {
    do whatever
    I can activate an action based on key 81 being pressed.
    But how would I do the same, regardless of what key is pressed?

    Sorry, figured it out...
    I just don't need to specify an if..... at all.
    Duh!

  • How much does it cost to change one key on the keyboard ?

    i have dropped my hair dryer on my keyboard, i would like to know how much it cost to change these keys:
    1. v
    2. b
    3. n
    4. space key
    plz email me back at [email protected]

    Service Answer Center - iPhone - http://support.apple.com/kb/index?page=servicefaq&geo=US&product=iphone  <-- enter correct country in drag-down menu once on page.
    "Service arranged through Apple costs £ 55.00. A £ 7.44 shipping fee will be added if this service requires shipping. All fees are in British Pound Sterling and include VAT."

  • Automatically Assign Control Key for External Assignment

    Hi All,
    Please can someone advise how I automatically assign the External Processing Control Key at the operation level using the Work Centre.
    I have a Main Work Centre set up which is linked to every Functional Location. This Work Centre has a default Control Key PM01 - Plant Maintenance - Internal,  assigned.
    I also have a second Work Centre which has Control Key PM02 PLant Maintenance - External, assigned.
    When I create a Work Order the system uses the Control Key assigned to the main work centre and assigns this at the operation level.
    When I change the Work Centre for Operation 010, to the second Work Centre (PM02 Control Key) it doesn't pull this through to the operation. I have to change this manually.
    Could someone explain why this is the case and how I resolve the problem.
    Any help appreciated.
    Regards
    Chris

    Teshin,
    Thanks for the information. I have checked the OSS Note the issue is as discribed in the note.
    I will look to implement the program corrections shortly and will confirm that the problem is resolved.
    Many thanks for the feedback
    Regards
    Chris

  • Confirmation control key-Make option

    Hi,
    In the field selction key(define screen layout at docuement level) of docuemnt type MK(Qty contract),I made as optional for confirmation control key .But While creating qty contract,still it is mandatory field for confirmation control key.How to make optional field of confirmation control key   in the contract.
    Can somebody throw light on this,please ?
    Regards,
    Jaheer.

    Hi
    In the field selction key(define screen layout at docuement level) of docuemnt type, you have to check all the feild selection like
    AKTH , ME31 , MKK (Qty Contract) ,if any of the feild selection if the confirmation control is reqired entry ,then while creatiog contract it will reflect,
    Check these feild selection keys if the confirmation control is active, and also check if you have created any new feild selection keys if the confirmation control is active.

  • Retrieve steus (control key)

    How can I retrieve steus or the control key using order?
    The structure that holds the control key is AFVGD-STEUS and I can't find a link to AFRU-AUFNR.

    go to structure AFVGD.
    and select the filed STEUS .
    Check the corresponding dataelement.
    and then use the whre used list option for that data element.
    it shows all the tables. then u can find the table which is linked to the AFRU table.
    Maybe  it will help you.
    - Selvapandian Arunachalam

Maybe you are looking for

  • "The requested URL /apex/f was not found on this server" error

    Hi there I'm getting the following error message when trying to access our apex app: http://theHost:8080/apex The requested URL /apex/f was not found on this server It just happened out the blue so i've no idea what happened. Can someone help me to f

  • Branching / Scenarios

    Good morning! I'm relatively new to Captivate, but I'm trying to create a branch and can't find a clean how-to... Similar to a thread on this forum back in August, I'm trying to create a demo wherein there are multiple viable paths, and therefore on

  • Setting up a UIWebView delegate

    Ok, this should be simple, but for some reason I'm lost. Primarily, because the different objects are in different modules and there doesn't seem to be a clean way to tie them together. I start with a UIView in a simple ViewController. Next, I want t

  • CRM Interaction Record

    Dear friends, I want to ask please how can i control the interaction record, for example the default business transactions that created automatically when i click on button "follow up". Best Regards, Mohamed

  • Can I load "Pages" onto new hard drive without having to pay for it again?

    I have a 5 yr old Mac that just had it's hard drive replaced.  I had paid for and loaded Pages onto the original hard drive.  Wondering if there's any way to load Pages onto my new hard drive without having to pay for the program again.  Thanks so mu