How to program my ATT remote to control volume on my Samsung Smart TV

I am only able to change channels on my Samsung smart TV via my AT&T remote. I would like it to control the volume as well but have been unsuccessful at being able to get the volume programs on the ATT remote.

This is more complicated now with the S-20 remote. You must have an s-10 because you cannot change TV channels on an s-20. MAybe you meeant you caan change u-verse channels.
If you have an old s-10 with mode buttons the volume on the TV in all modes is the default after programming the TV. So, if yo do not have tv volume control, you have not yet found the correct code. If you want to start from scratch, the factory defaul program is att/ok -900.
If you have a new s-20, without mode buttons, the default is STB volume control. You need to change it. Here are the directions - http://www.att.com/esupport/u-verse/remotes/

Similar Messages

  • How do I use ios remote to control volume on my imac

    I used to be able to control the volume when using my imac to play itunes through an airport to remote speakers using the ios remote app. Is there a workaround to get the volume control back so I can sit on my patio w/my iphone and change the volume?

    You just need to slide the volume slider in the Apple Remote, but will need to be connected to your wireless network. 

  • Have programmed 3rd party remote to control apple tv first edition---have purchased new apple tv..will remote work without reprogramming?

    have programmed third party remote to control 1st edition apple tv--purchased new (3rd edition) aplple tv and do i have to reprogram remote or will the remote settings work?

    You would have to reprogram.

  • How To Program  Function(F1..F12)a Control Key ( Del..)of Keyboard FORMS6i

    Please how to program a Function (F1..F12) & a Control Key ( Del,Esc,Key+,....) of Keyboard in FORMS6i.
    Thanks of your Help.

    You can override the default functionality of F-keys with the Key-F0-9 triggers without having to modify the frmweb.res file.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • How to set ACLs on Remote MAC server Volumes..

    Hi,
    I have Mac OS X server v 10.5 Leopard. Initially I have enabled the ACLs using fsaclctl on the MAC server volume. When this volume gets mounted(through afp) on some other MAC client(MAC OS X 10.4 Tiger), the ACL status is shown as disabled. And it not allowing to set the ACLs on the remote volume from the client side.
    I have used the following command to enable ACLs from Client.
    sudo fsaclctl -p /Volumes/<server Volume> -e
    This failed as "not supported".
    Anyone knows how to set the ACLs on the remote MAC server volumes? Basically I want to see ACL working on Remote MAC server volumes.

    Hi
    +". . . remote MAC server volumes . . ."+
    Are you saying you are trying to enable ACLs on volumes shared by another OSX Server when volumes are mounted on the server in question?
    Or are saying you can't see if ACLs on mounted volumes when issuing ls -lae for example?
    You might want to read:
    http://discussions.apple.com/thread.jspa?messageID=648307&#648307
    http://discussions.apple.com/thread.jspa?messageID=1535247
    and
    http://discussions.apple.com/message.jspa?messageID=8456140#8456140
    http://discussions.apple.com/message.jspa?messageID=8340573#8340573
    http://discussions.apple.com/message.jspa?messageID=7777878#7777878
    Tony

  • HT3176 What is the numerical remote code for the apple remote? I would like to program another manufacturers remote to control my iPod dock

    I would like to control my iPod doc with my Denon remote.  Does anyone know he numerical remote code for an apple iPod doc?

    Hi kwg06516,
    This remote(RMT-B126A) doesn't have programmable codes because its not a universal remote. It is exclusive for your player(BDP-S3200) only. It may control other devices such as TVs but with the same brand only.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • HT3399 F10, F11 and F12 will not control volume.

    I replaced the keyboard and my new keyboard and I cannot get the F10 to mute or F11 volume down or F12 volume up to work, at all.  How do I get these keys to control volume?

    Hello,
    Is this normal speakers or HDMI?
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/

  • How to program Sony RMT-VB100U Blu-Ray remote to control Vizio TV

    I want to eliminate some remote controls...I have a Vizio TV and want to turn it on/off and adjust volume via my fancy little Blu-Ray remote Sony RMTV-B100U that came with my BDPS3500, BUT the pre-programmed brands do not include Vizio.  How do I make this remote work with the Vizio, or am I just screwed and need to buy a tool belt to carry all these ****** remotes around?  I'm not buying a universal remote when I have plenty of remotes that should do the job.

    Hi nphiker, 
    Welcome to the Sony Community! 
    The supplied remote " RMT-VB100U " is not a universal remote control. However, you can control some televisions which is not a Sony TV. Please refer to the link below on page 44 for the supported TVs.
    https://docs.sony.com/release/BDPBX350_EN.pdf
    If my post answers your question, please mark it as "Accept as Solution" 

  • How do I use an apple tv remote to control my mac

    I am having a macbook pro with retina. How do I use an apple tv remote to control my mac?Is there a way. For eg. if I want to control the volume using the remote how do I do?

    No, the iPad has no IR receiver. (I think you mean "Airplay" and not "Airdrop", by the way.)

  • I would like to do a program that have one string control and one string indicator, any character that I type in the string control in the same time it will be appear in another string (indicator). How can help me?

    I would like to do a program that have one string control and one string indicator, any character that I type in the string control in the same time it will be appear in another string (indicator). How can help me?

    Why not use an event
    Add a While Loop, inside the loop add the Event Sructure.
    Now in the event structure selecd the String Controls.value change event to
    react
    and the new value inside the event that you get,( connect to the String
    indicator box.
    On Sun, 10 Aug 2003 15:58:47 -0500 (CDT), WiltonFilho wrote:
    > I would like to do a program that have one string control and one
    > string indicator, any character that I type in the string control in
    > the same time it will be appear in another string (indicator). How can
    > help me?
    >
    > I would like to do a program that have one string control and one
    > string indicator, any character that I type in the string control in
    > the same time it will be appear in another string (indicator). How can
    > help me?
    >
    Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/

  • How to make the LV front panel controls the current value through the program is set as the default value when the next time you open?

    How to make the LV front panel controls the current value through the programis set as the default value when the next time you open?
    1110340051 

    Try this: Re: How to make a VI remember the latest control value?
    Jim
    You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

  • Can you use the apple remote to control tv programs?

    Can you use the apple remote control like a tv remote to control tv programs & DVDs on the computer? Everything I've found about the Apple Remote talks about using it for products other than desktops. I watch some regular tv shows on my iMac & would like to be able to use a remote control.
    I have a built-in infrared receiver.
    Thanks!

    You should be able to control DVD playback now with the Apple Remote. You may be able to get a bit of functionality with web sites by using Remote Buddy by using it as a virtual mouse and keyboard:
    http://www.macupdate.com/app/mac/21872/remote-buddy
    but you're not going to get anything close to the sort of functionality you'd get with a remote and a TV.
    Regards.

  • How to program new remote to recognize dvd player

    We are trying to program our new system Xfinity1's remote control to recognize our dvd player. When using TV input button, the up and down arrows stay on  HDMI1/DVI and do not move to any other selection. Are we not going to be able to use this remote for our dvd player? The remote we have is the voice remote.

    Sounds like you are talking about at least two different things. X1 remotes don't "recognize" anything accept X1 boxes. Your TV "recognizes" other devices such as DVD players. With many TVs you need to make sure the input your DVD player is connected to is actually activated in the TVs settings.
    Also, X1 remotes cannot control DVD players. Period.
    The input changing issue is ENTIRELY different. The input button on the X1 remotes has limitations. If you press the input button on the Comcast remote repeatedly and it doesn't cycle the inputs on your TV, then it is not going to work.
    sweetpea10 wrote:
    We are trying to program our new system Xfinity1's remote control to recognize our dvd player. When using TV input button, the up and down arrows stay on  HDMI1/DVI and do not move to any other selection. Are we not going to be able to use this remote for our dvd player? The remote we have is the voice remote.

  • How to determine fixed line of table control using BDC program ?

    Dear All,
    I create program using BDC that contains table control.
    Unfortunately the table control line of BDC program will depend on the resolution of our PC setting.
    Sometime I have 2 lines, sometime 3 lines (in different PC).
    How to determine fixed line of table control?
    So it will never be confusing me whether I have 2 or 3 lines.
    Thnx - Regards,
    (Taufik K.)

    Hi Taufik,
    Check the table CTU_PARAMS and field DEFSIZE for setting fixed line of a table control.
    CALL TRANSACTION 'VA01' USING it_bdcdata
    OPTIONS FROM OPT
    MESSAGES INTO it_mesg.
    opt of type ctu_params.
    WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
    WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
    WA_CTU_PARAMS-NOBINPT = 'X'.
    WA_CTU_PARAMS-NOBIEND = 'X'.
    WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
    Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
    Reward if helps.
    Regards,
    Senthil
    Message was edited by: senthil kumar

  • How to control volume with apple tv remote to mac

    My Apple TV remote is controling the volume to my Macbook pro and I don't want it to. help?

    On Mac go into system preferences - security - general. Click on the padlock (bottom right) in order to select the advanced button. Check disable remote control infrared receiver

Maybe you are looking for