How to program Sony RMT-VB100U Blu-Ray remote to control Vizio TV

I want to eliminate some remote controls...I have a Vizio TV and want to turn it on/off and adjust volume via my fancy little Blu-Ray remote Sony RMTV-B100U that came with my BDPS3500, BUT the pre-programmed brands do not include Vizio.  How do I make this remote work with the Vizio, or am I just screwed and need to buy a tool belt to carry all these ****** remotes around?  I'm not buying a universal remote when I have plenty of remotes that should do the job.

Hi nphiker, 
Welcome to the Sony Community! 
The supplied remote " RMT-VB100U " is not a universal remote control. However, you can control some televisions which is not a Sony TV. Please refer to the link below on page 44 for the supported TVs.
https://docs.sony.com/release/BDPBX350_EN.pdf
If my post answers your question, please mark it as "Accept as Solution" 

Similar Messages

  • How can i use my LAN Blu-ray player and tv to view screens on my macbookpro

    how can i use my LAN Blu-ray player and tv to view screens on my macbookpro

    in short - no.

  • PS3 Blu-ray remote? Anyone from Sony able to comment?

    I really like being able to use the game controllers withmyX Z Ultra, do it seemed reasonable to hope that the Blu-ray remote fit a PS3 would work.
    The first hurdle was pairing them. The ps3 remote has more PIN, and android won't let you pair with a blank PIN. However, I found an app which solves this:
    https://play.google.com/store/apps/details?id=com.jpn.frontia.waka.Bluetooth
    Sadly, after pairing, the Blumote doesn't actually control my Xperia.
    Does anyone have any ideas whether this might be made to work?
    Being able to plug my XZU into the tv or sound system and control a media player app with a Blu-ray remote would be awesome
    Tasks

    I'd even be happy to be a beta tester for this. I am still wondering why this would be so hard? Surely the ps3 blumote should generate the same Bluetooth events as a game controller?
    I guess I need to do some of my own investigations into this.

  • IPod intergration with Sony BD 370 Blu Ray

    Have a 120 gb iPod, recently purchased a Sony Blu Ray BDP S370. Can access the iPod from the front USB connection. However it will only allow folder by folder access to files, and does not give real names for files. Does anyone know how to fully utilise this capabilty. It is presently not connected to the internet.

    I have the same problem on my HDX 16 have had no blu-ray playback for over a year and now I have updated to windows 7 the drive will not recognise duel layer DVD disks either.
    I have tried all the various fixes listed, none work.
    This seems like a firmware problem but no new firmware is available from HP (unlike other manufactures) and HP apear not to care.....

  • How to ensure iTunes download in blu-ray combo pack?

    When purchasing a blu-ray combo pack, how can you determine if the digital copy will be honored by the iTunes Store? Is there a certain logo to look for?  I am seeing less packs with the actual iTunes logo.  The words "works with iTunes" is meaningless since that might mean they expect you to copy a file from their web site into iTunes OR add an extension to iTunes.  I'm looking for some way to ensure the code in the combo pack is REDEEMABLE from the iTunes Store.
    Prior to every other provider popping up, I would always purchase the blu-ray combo pack before buying the download directly from iTunes. After getting burned a few times by mediocre companies with proprietary downloads I stopped buying discs altogether. With over 1,000 owned movies from iTunes, countless purchased TV seasons, eight AppleTV devices, and multiple iPads and iPhones, I really do not want to move away from Apple.
    Thanks, in advance.
    -- Fred

    Wow, you're locked into the Apple ecosystem!
    Here's how to tell:
    If it says "Digital Copy", then it's iTunes compatible. Usually, you have to go to the Film Distributor's website, enter the code, then it passes you iTunes for download. Sometimes it's just copying from a DVD to your hard drive (which you can then use in iTunes).
    If it says "Ultraviolet Digital", you're not going to be able to use it in iTunes. I've not seen any that are just Ultraviolet.
    See this link at Amazon. It has links to each of the major studios, all of which have slightly different rules and policies.

  • I have an iPod touch 4th generation and have tried to connect it to my Sony BDV-E970W blu-ray player. The player does not recognise the iPod. What can I do to fix this?

    I have an iPod Touch 4th gen player and cannot connect to a Sony blu-ray BDV-E970W player. Sony system does not recognise the iPod. Do I need to link the Sony to the net and upgrade the software on the dvd player?

    As the other replier said, contact Sony. It may not be compatible with the iPod.

  • Any one know how to use TouchSmart 600-1055 blu-ray to output to TV?

    I just bought TouchSmart 600-1055 with blu-ray today.  Any one know how to output video and audio to larger TV?

    If it is anything like the 600-1265qd, you may need to purchase a USB adapter to connect to a DVI or HDMI port on the TV.  However, there are no HDCP-compatible USB connectors...

  • Sony SBD 360 Blu Ray and WRT54GS connect to network. Help!!

    I am having trouble connecting this Blu Ray Player to my network. I have a cat5 cable from the router to the Blu Ray Player. I called Sony but they are telling me it is a setup problem with my router. All help will be appreciated.

    On you DVD player, where you set it for DHCP, there were probably a number of various settings, hopefully something like Static IP, Subnet Mask, DNS & Gateway. Sometimes it asks for 2 Domain Name Servers.
    So if you had set the IP of the WRT to 192.168.1.X/255.255.255.0, then assign  the IP of your DVD Player to  192.168.1.20/255.255.255.0.
    Most gateways have an IP of 192.168.1.1 but you can find out the IP by going to any of your connected clients (PCs) and from the Command Prompt type "ipconfig /all" and look for the DNS and Gateway settings. Write them down and then make those settings the same on the DVD player.
    You can search on Blue ray forums.

  • Linksys e4200 - Best Connection for Streaming on Sony S580 wifi Blu ray Player

    I have a new e4200 and I am trying to improve the signal for my blu ray player.  The player is down one floor frm the router and I am able to get some reception on the blu ray.  But there are times when I get spooling interuptions and drops of the network when I am doing something like Netflix.  I have attended to all the potential physical contraints on the router that I can (ie, things in the way, barriers, etc), and have done basic setup changes like change the channel to remove interference. 
    I am not a techie but I learn stuff from internet and can fix a lot of problems.  This one is a bit tougher.  I think that I should be able to get a stronger signal with this router and want to know how I can optimize my setting to achieve this.  With a signal meter I read a signal strength of approx -70dBm and speed of up to 12mbps on the onscreen meter...but this fluctuates from a low in the 3s, 4s and 5s.  As I said the player is down a level and about 20ft east from the router with a few unmovable walls and the obvious staircase.
    Any help of setting to solidify the signal would be appreciated.  Thnx in advance for the help.

    i just thought of another issue that may be helpful.  the wireless receiver on the bd player is 802.11 b/g/n and is on 2.4 ghz band.  sorry for all the adds, but i figure more info is better than less.
    thanks
    craigpicc wrote:
    sorry...one things to add.  When i do a speed test on the desktop wired to the router i get about 20 to 24 mbps, so think this would be the top out i get on speed from any wireless connection.  hope this helps some.
    thanks.
    craigpicc wrote:
    I have a new e4200 and I am trying to improve the signal for my blu ray player.  The player is down one floor frm the router and I am able to get some reception on the blu ray.  But there are times when I get spooling interuptions and drops of the network when I am doing something like Netflix.  I have attended to all the potential physical contraints on the router that I can (ie, things in the way, barriers, etc), and have done basic setup changes like change the channel to remove interference. 
    I am not a techie but I learn stuff from internet and can fix a lot of problems.  This one is a bit tougher.  I think that I should be able to get a stronger signal with this router and want to know how I can optimize my setting to achieve this.  With a signal meter I read a signal strength of approx -70dBm and speed of up to 12mbps on the onscreen meter...but this fluctuates from a low in the 3s, 4s and 5s.  As I said the player is down a level and about 20ft east from the router with a few unmovable walls and the obvious staircase.
    Any help of setting to solidify the signal would be appreciated.  Thnx in advance for the help.

  • How do I make interactive DVD/Blu-Ray menus with motion?

    So, adobe doesn't support Encore anymore which means I can't use dynamic link to AE to create interactive DVD/Blu-Ray menus with motion.... or can I? Is there something I'm doing wrong? While in Encore, I go to dynamic link and boom, dynamic link to AE is not highlighted. If I can't make an interactive menu with motion using adobe, then what can I use? This is causing a major problem for me and my clients. (if i over looked the answer to this in another post, my apologies)

    You can use the "Create After Effects Composition." This prompts you to create an independent version of the Encore PSD menu file, and opens the layered file in AE CC and creates a new composition with appropriate settings. AE no longer has mpeg export, so you export from AE to AME.
    There were some workflow options that I did not play with much, but they were never what I saw as the basics for using AE to create the motion background.
    You need to understand these two help pages:
    Adobe Encore * Menu timing and looping
    http://help.adobe.com/en_US/encore/cs/using/WSF49EA5DB-3743-49c2-9831-F66328B192F8.html
    Adobe Encore * Using After Effects to enhance menus
    http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
    I'm not sure what you mean by "interactive" unless you just mean creating navigation.

  • How to get better resolution on Blu-ray (1080/60i)

    I'm experimenting with my new AG-AC160A camcorder and have been shooting youth hockey games in AVCHD mode, 1080/60i, 1/120 shutter, manual gain and white balance set appropriately, and florescent scene file setting due to lighting in rink. I have PP CS5 and am disappointed with the relative lack of HD-crispness when the Blu-ray output is played on my HD LED set. I used the above settings based on recommendations I saw in the forum somewhere. Any suggestions on what I can try differently? Thank you.

    To elaborate on Ann's great advice, the Sequence preset you should be using is AVCHD 1080i30 (60i).
    A good way to start out with the correct sequence is to import your clips and then drag one onto the "New Item" icon at lower right of Project Bin. This will create a new sequence to match the source material automatically. As Ann mentioned, you have a non-HD preview format, so if you rendered the timeline to green, and checked "Use Previews" on the final export, then your Blu-ray could have "SD quality" footage in it!!
    Curious why the 1/120 shutter, hoping to get better action motion?
    If you have a current timeline using the incorrect settings, go ahead and add a NEW Sequence with correct settings, open original sequence and "Select All" which is CRTL + A, then CTRL + C to Copy. Then go to the proper AVCHD sequence and Ctrl + V to Paste entire contents. You will now have the edited sequence moved into correct sequence settings. Now use Export and in AME choose "H.264 Blu-ray" and choose the 1080i preset and export, then use results in Encore. The Blu-ray should look excellent when done correctly.
    When exporting from AME, do NOT check the box for "Use Previews", as you want to encode direct from original source and skip any intermediate render clips.
    Thanks
    Jeff Pulera
    Safe Harbor Computers

  • How to read an arborescence of blu-ray files  ?

    Hi,
    I don't have a bluray reader, but I was wondering if I could read blu-ray files with a software, maybe VLC ?
    Sincerely

    I didn't mean read a disc, only files, the same that are on the disc but on my HD.
    You still need a Blu-ray drive. You won't be able to watch Blu-ray movies, but OS X will be able to read data files (and write data and movie Blu-ray discs with Toast).
    <http://www.roxio.com/enu/products/toast/pro/overview.html>

  • How to burn slide show to Blu-ray DVD ?

    I've burned a slide show with music to a regular DVD but it comes out with poor resolution when blowing up to full screen. When I try to burn same to a Blu-ray DVD I can't because it burns at about 20 fps ( which I don't need ) and takes too much memory ....about 4 Gig !

    Photoshop Elements does not do the burn of a slide show to a DVD disc or to Blu-ray disc: Photoshop Elements only burns the VERY low resolution VCD format to a CD disc. The DVD formats are created by the Adobe Premiere Elements software which perhaps you purchased in; a bundle with Photopshop Elements.
    Premiere Elements has a separate forum at
    http://forums.adobe.com/community/premiere_elements
    so that is where you will find people who can help with questions about Blu-ray and standard def video DVDs
    When you post on that forum, I recommend that you include which version of the Adobe software you are running, which version of Windows, and whether you are doing your playback of the slide show at full screen on a computer or using a TV DVD player. Also if doing playback on a computer include what software are you using for playback at full screen and what is the resolution of that screen ?

  • My Sony Bravia Tv/blue ray combo no longer regonizes or plays any sort of disk.

    No longer wants to play any disk. It does not detect one when inserted. Yesterday it didnt even want to eject the disk but after powering it off and back on it finally ejected it. Still will not detect or play a disk

    Hi Jodymaynor,
    Welcome to Sony Community.
    Kindly provide us the model no. of your Sony device, for us to better assist you with your concern. Please see this link for you to have a guide on where will you check the model no.
    Thanks!
    Jerome

  • Satellite L775-13D: How to get full screen playing Blu-ray on TV

    Hello,
    I want to play bluray DVDs direct from my laptop to my LG 42inch plasma. I can connect via HDMI but a small portion of the sides and bottom are cut off on the TV. How do I make the image play on my TV without any quality loss as if I had a bluray player connected to my TV? Hope someone can help
    Thanks
    geoff

    >no, i have the picture on the laptop and tv.
    Try to setup the output only to TV and check if the external resolution is set to the same resolution which is supported by TV. I assume the TV supports the full HD resolution which is: 1920x1080px

Maybe you are looking for

  • External email

    Hi Experts, I want to send mail via SAP Office using the external e-mail address as sender In an input field I selected an email id (sksinghagmail.com) Now I want this id to be used as sender of the mail. Please suggest how this can be achieved. Poin

  • Kde apps in gnome

    I'm not sure what I'm missing here.. When I try using kde apps in gnome they all fail to launch, I'm confused about what Arch needs to run them. I have tried installing ktorrent and rosegarden. I get the same error on both: /opt/kde/bin/ktorrent DCOP

  • Activate Javascript Function in Report Load

    Hi I have a javascript function that works. I put it in my ReportingServices.js file. If I have a hyperlink on my page and click it, it activates my function and my mouseover events works perfectly. It is a hybrid based on the following: http://blogs

  • Select last document part 2

    Hi I recently had some assistance that gave me the following query SELECT Top 1 T1.ItemCode, T1.Dscription, T0.DocDate,T1.Quantity, T0.DocNum, T0.CardCode, T0.CardName FROM dbo.OPOR T0 INNER JOIN dbo.POR1 T1 ON T0.DocEntry = T1.DocEntry WHERE (T1.Ite

  • View link between view based on entity(table) and view based on stored proc

    I've created a view based on a stored procedure. I need to link this view to a view based on an entity which is based on a table. I can create the view without issue, but when I attempt to run the application module that contains the relationship I g