How to programatically resetAction after rollback?
Hi,
how can i programatically execute resetAction after rollback?
OperationBinding operationBinding = bindingContainer.getOperationBinding("Commit");
Object result = operationBinding.execute();
/* in case commit fails, rollback automatically */
if (!operationBinding.getErrors().isEmpty()) {
operationBinding = bindingContainer.getOperationBinding("Rollback");
result = operationBinding.execute();
/* *** here, i should reset action, how? *** */
}
Hi Frank;
I am using a parameterized search form (using named bind variables), which also displays the results.
The user enters values for a three part key.
I have valueChangeListener on the third inputText, where I perform an executeWithParams.
If a record is found in the database, and the form is populated, the user is then free to perform edits.
If a record is not found in the database, we naviage to a creation form.
If they want to delete the record (only available in the search/edit form), and use a delete commandLink, they are offered a confirmation dialog.
If they indicate that they want to continue with the delete, we execute the "DeleteTrip" action binding.
After the action binding completes, I would like to present an empty form for the user to enter another set of keys (with and empty EO and VO).
Here is my delete commandLink tag:
<af:commandLink action="dialog:confirmDelete"
textAndAccessKey="&Delete"
immediate="true"
useWindow="true"
windowHeight="50"
windowWidth="200"
partialSubmit="true"
returnListener="#{backing_Edit.handleDeleteTrip}"
id="commandLinkDelete">
<af:resetActionListener/>
</af:commandLink>
It seems the resetActionListener fires before executing the code in the returnListener, thus when the DeleteTrip action binding completes, the record just deleted remains in the form onscreen; and to get my desired behavior, the user must click a "Clear" link to execute the clear_action listed below.
Here are the four pertinent methods in the edit form backing bean:
public void handleDeleteTrip(ReturnEvent event) {
if (event.getReturnValue() != null) {
String ret = event.getReturnValue().toString();
if (ret.equals("delete")) {
bindings.getOperationBinding("DeleteTrip").execute();
commit_action();
public void commit_action() {
appMod.getTransaction().commit();
reInit();
private void reInit() {
// The importance of this method is to set all bind variables null
// and re-execute the TripView query in order to empty the EO
ADFUtils.setBoundAttributeValue("bindYear", Calendar.getInstance().get(Calendar.YEAR));
ADFUtils.setBoundAttributeValue("bindManagementAreaCode", null);
ADFUtils.setBoundAttributeValue("bindTripNo", null);
bindings.getOperationBinding("ExecuteWithParams").execute();
appMod.getTransaction().clearEntityCache(null);
public void clear_action() {
bindings.getOperationBinding("Rollback").execute();
reInit();
Any help toward clearing a form after executing a delete action binding would be greatly appreciated!!
Jeffrey
Similar Messages
-
How to stored data after clicking checkbox save in database table
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP.
TYPES: BEGIN OF tp_data,
mblnr LIKE mseg-mblnr,
matnr LIKE mseg-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
lgpbe LIKE mard-lgpbe,
charg LIKE mseg-charg,
bwart LIKE mseg-bwart,
budat LIKE mkpf-budat,
menge LIKE mseg-menge,
meins LIKE mseg-meins,
kostl LIKE mseg-kostl,
aufnr LIKE mseg-aufnr,
rsnum LIKE mseg-rsnum,
endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
*data: t_data like ztable occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
========================== Selection Screen ==========================
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
smatnr FOR mseg-matnr MODIF ID m2,
swerks FOR mard-werks MODIF ID m3,
slgort FOR mard-lgort MODIF ID m4,
slgpbe FOR mard-lgpbe MODIF ID m5,
scharg FOR mseg-charg MODIF ID m6,
sbwart FOR mseg-bwart MODIF ID m7,
skostl FOR mseg-kostl MODIF ID m8,
saufnr FOR mseg-aufnr MODIF ID m9,
srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
pse RADIOBUTTON GROUP radi,
bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
=========================== Event Blocks =============================
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
=========================== Subroutines ==============================
*& Form get_data
Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
JOIN mkpf ON msegmblnr EQ mkpfmblnr
WHERE mseg~matnr IN smatnr.
ENDFORM. " get_data
*& Form build_alv
Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title TYPE lvc_title,
w_comm TYPE slis_formname,
w_status TYPE slis_formname,
x_layout TYPE slis_layout_alv,
t_event TYPE slis_t_event,
t_fieldcat TYPE slis_t_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
2 'MATNR' 'MATNR' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
3 'WERKS' 'WERKS' 'MARD' space space space space space space space space space space space space t_fieldcat,
4 'LGORT' 'LGORT' 'MARD' space space space space space space space space space space space space t_fieldcat ,
5 'LGPBE' 'LGPBE' 'MARD' space space space space space space space space space space space space t_fieldcat ,
6 'CHARG' 'CHARG' 'MSEG' space space space space space space space space space space space space t_fieldcat ,
7 'BWART' 'BWART' 'MSEG' space space space space space space space space space space space space t_fieldcat,
8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space space space space space space space t_fieldcat,
9 'MENGE' 'MENGE' 'MSEG' space space space space space space space space space space space space t_fieldcat,
10 'MEINS' 'MEINS' 'MSEG' space space space space space space space space space space space space t_fieldcat,
11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space space space space space space space t_fieldcat,
12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space space space space space space space t_fieldcat,
13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space space space space space space space t_fieldcat,
14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
it_fieldcat = t_fieldcat
is_layout = x_layout
it_sort = t_sort
i_callback_pf_status_set = w_status
i_callback_user_command = w_comm
i_save = 'X'
it_events = t_event
i_grid_title = w_title
TABLES
t_outtab = t_data
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " build_alv.
*& Form set_top_page_heading
Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
x_event TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*& Form set_events
Sets the events for ALV.
The TOP_OF_PAGE event is alredy being registered in
the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*& Form set_order
Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM. "set_order
*& Form set_fieldcat2
Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname p_ref_tabname
p_outputlen p_noout
p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
p_hotspot p_showasicon p_checkbox p_edit
p_dosum
t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data element.
If p_ref_tabname is given, the ref_fieldname given is a field of a table. In case ref_fieldname is not given, it is copied from the fieldname.
IF p_ref_tabname IS INITIAL.
wa_fieldcat-rollname = p_ref_fieldname.
ELSE.
wa_fieldcat-ref_tabname = p_ref_tabname.
IF p_ref_fieldname EQ space.
wa_fieldcat-ref_fieldname = wa_fieldcat-fieldname.
ELSE.
wa_fieldcat-ref_fieldname = p_ref_fieldname.
ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF p_edit IS NOT INITIAL.
wa_fieldcat-INPUT = 'X'.
wa_fieldcat-EDIT = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM. "set_fieldcat2
=========================== Subroutines called by ALV ================
*& Form top_of_page
Called on top_of_page ALV event.
Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'XXXXX'
it_list_commentary = t_heading.
ENDFORM. " alv_top_of_page
*& Form user_command
Called on user_command ALV event.
Executes custom commands.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
ENDFORM. "user_command
this is my code, how to store data after clicking checkbox in databasetable,
how to write that cide.
plz send me code.hi!,
use MODIFY to update data into the data base table.
regards
anjali -
Any ideas on how to fix ipad after the new iOS 7 update? My battery will not charge, my ipad is hot to the touch, the iTunes Store won't open, and my messages on Facebook aren't showing up when I chat and pintrest won't pin to my boards.
If you have all your music on the cmputer then i would connect up my phone uncheck the Sync Music option and apply.
This should take all the music off your phone .Then you can resync the music back on to it.
If this doesn't work maybe a restore to factory settings and start from scratch is the way to go -
TS4036 How do I restore after 5.1 os upgrade
I upgraded my software and lost al my apps
fdonnelly wrote:
How do I restore after I have already setup a new device? ...
...to restore from an iCloud backup, erase your device (by going to Settings > General > Reset > Erase All Content and Settings). When prompted to set up as new or to restore from previous backup, select Restore from iCloud Backup. Enter your AppleID and password when prompted.
See How to Restore from a Backup Here...
http://support.apple.com/kb/ht1766 -
How to install iPhoto after upgrading to yosemite?
how to install iPhoto after upgrading to yosemite?
Download it from the App Store as Matt suggested. You may have to move the current version to the Trash Bin (don't delete yet), go to the App Store and look for iPhoto 9.6 under purchases. It will be free.
What iPhoto version did you have prior to the Yosemite upgrade? If it was iPhoto 7 (08) or earlier you'll also have to download and run the iPhoto Library Upgrader 1.1 on your library before opening it with iPhoto 9.6. -
It appears that, with the options that are visible to the user, Dynamic Link only goes one-way and can't make round trips from Premiere Pro to After Effects and back again. If I send a sequence to After Effects, that part works fine and I can do what I want and save the comp. However, even though the comp appears as an asset in Premiere Pro, I am not allowed to do anything with it. If I try to drag it to a new sequence, it just says no. If I click "Create Sequence from Clip" it creates an empty sequence.
So how can I use After Effects on whole sequences/tracks instead of just on a clip-by-clip-by-clip-by-clip-by-clip basis? is this possible? For instance, if I have a whole sequence where I've neutralized the white balance, I might want to apply a warming filter to the whole thing as a unit. That would be really painful with even a few clips to keep doing that again and again, and if you want to modify it slightly you have to do it over and over. If there is a way to do that through Dynamic Link through some hidden option, what happens with the audio? Would I have to cut it out of the lower sequence and paste it into the higher sequence with the After Effects comp as a video track?I'm not an Adoby guy, hence you may ignore my reply, but Adobe Dynamic Link is obviously not just one way ticket and in most cases works just fine.
You have already been explained by J-MS and tclark513 how to properly use it and which pitfalls may occur.
So as to apply an effect onto a whole sequence or a group of clips you need to either nest them in PrPro or pre-compose them in AE. Then just apply an effect (or several ones) onto that composition.
So, if you nest clips in PrPro, select your nested sequence in the timeline, right-click and choose 'Replace with After Effects Composition'. Done! Your dynamically linked AE composition is in the right place in your timeline and in your Project panel as well. If you can not treat it as an ordinary footage, there are obviously some mistakes in your workflow.
If you didn't nest your sequence or a group of clips in PrPro before replacing them with AE composition, you may easily do it within AE. Just select all the layers in AE composition and choose Layer -> Pre-compose... (Ctrl/Cmd+Shift+C) Done! Switch back to your Master comp and apply your desired effect(s)
You may loose some effects or/and transitions while travelling from PrPro to AE via Adobe Dynamic Link, whereas you don't while travelling back
(If you start building your AE composition from scratch right in AE and then need to import it into PrPro, DO NOT export one as PrPro project out of AE, but rather choose Adobe Dynamic Link -> Import After Effects Composition... within PrPro)
P.S. And yes, submit a feature-request so that Adobe will convert 'Transparent Video' into fully functional 'Adjustment Layer'. -
How can I install after effects on 32 bit operating system?
How can I install after effects on 32 bit operating system?
I cant even find it in creative cloud.
I want to make a intro but it dossent allow me to even find/ istall it.
I hope some one will help me by anwsering my question.
Than you for time.If your system does not meet the minimum system requirements you have to go back to a version that does. Try the direct download links you'll find here.. CS5 comes bundled with CS4 for AE which is the last version to run on a 32 bit system.
-
I have lost all my notes data after restore. Anyone know how to retrieve notes after restore?
I havent' took any backup of my notes in icloud. The moment I enter the password after restore my notes will be empty. The only option to get notes back is that after restore skip entering icloud password. But any time I enter icloud password anywhere again my notes will be empty. I have huge data saved in my notes. Apple need to look into this issues very seriously. This is the 5th time I restoring my iphone today just to get my note back.I have the issue with losing all my notes and I don't even know why. I can't remember changing any email account info. What happened to them?
Ipad 3rd io7
Please Help!
Thank you,
S. -
How to programatically get a Java version (Not default one) ?
Hi, Java Guru,
Does anyone know how to programatically get a Java verstion through its full path ?
For example, there are 5 JVM installed on a user's machine:
JRE1
JRE2
JRE3
JRE4
JRE5
How do you know the Java version under JRE3 ?
From command line, you can simply type
JRE3/java -version
But how to programtically ? (I thought about running a system call, then check the standout, but feel it is not reliable, is there any other way to do it ?)
Thanks in advance.No. That is not waht I want. Using System.getProperties() only can get the default Java information.
Assume there are many Java version installed on a user's machine and we know all java Path.
JRE1/bin/java
JRE2/bin/java
JRE3/bin/java
JRE4/bin/java
JRE5/bin/java
JREn/bin/java
JREn/bin/java is the latest one installed, that is, default Java.
I want to know the JRE3 version before I use it, then how do I know JRE3 version PROGRAMTICALLY ?
Anyway, thanks for response. -
How to remove space after paragrph in pages on ipad
Can't figure out how to remove space after each paragraph in Pages for Ipad
Settings > General > International > Region Format
Set it to your country to format numbers and dates in the way your country does. -
How to change an after login page?
Does anyone knows how to change an after login page from a default page 1 to, let's say page 200?
Jessica,
The URL to run your application is http://apex.oracle.com/pls/otn/f?p=23533.
If you use this, page 3 is the first page shown after login.
Using the URL you gave runs the Application Builder, not your application. If you use the Builder's Run Application icon to run your application, the page in your application that you are requesting is page 1 (or whatever is in the application's Home URL attribute). But running your application this way is something you do in a development environment only
Your basic question has to do with how end users would get to a particular after-login page. End users do not have access to the Application Builder.
Scott -
How do I unactivate after hard drive crash?
Just purchased an upgrade to CS6 Photoshop from CS3 Photoshop but hard drive crashed before I could uninstall it. How do I deactivate after hard drive crash? Do I need to or can I just load my full CS3 copy and then upgrade it to my new CS6?
You can just install CS6 directly. You will be prompted to enter your qualifying serial number from CS3 during the install process.
-
How to get ProcessInstanceId after Workflow KickOff. Am able to get the InvocationId
How to get ProcessInstanceId after Workflow KickOff. Am able to get the InvocationId.
This is the Snippet :
InvocationResponse response = myServiceClient.invoke(request);
invocationId = response.getInvocationId();
System.out.println("ClientParams="+response.getClientParameters());
System.out.println("OutputParams="+response.getOutputParameters());
System.out.println("invocationId="+invocationId);
JobManager jobManager = new JobManager(myFactory);
JobStatus jobStatus = null;
JobId myJobId = new JobId(invocationId);
jobStatus = jobManager.getStatus(myJobId);
System.out.println("Job Status: " + jobStatus.getStatusCode());
if (jobStatus.getStatusCode()==JobStatus.JOB_STATUS_COMPLETED)
System.out.println("INVOCATION COMPLETED SUCCESSFULLY!");
InvocationResponse jobResponse = jobManager.getResponse(myJobId);
jobManager.terminateJob(myJobId);
jobResponse.getInvocationId();
Process id need to be fetched after Workflow Kickoff
Can anyone please help me..?There are 5 process level variables that get populated when you invoke a process. They are
/process_data/create_time
/process_data/creator_id
/process_data/id
/process_data/status
/process_data/update_time
Within the xPath builder you can differentiate them from other process variable because they are italicized.
Now you can create your own process variable - let's say called pid - and have it contain the process id which is stored in /process_data/id.
The xPath would look something like
/process_data/@pid = /process_data/@id
If the pid variable is marked as an 'output' variable, then it will be returned as part of the InvocationResponse.
Jasmin -
I'm writing a program that when I am iterating through a loop, I want to have some buttons disabled and grayed. Once the loop is done, I want those buttons to now be enabled.
But I have no clue how to programatically do this
(aka enable and disable while the program is running, NOT before the program starts)
Any help would be appreciatedCreate a property node, & select the 'Disabled' property. Set it to 0 for enabled, 1 for disabled, & 2 for disabled & grayed.
Paul Cardinale -
I NEED A SOLUTION ON HOW TO UNLOCK THE AFTER EFFECT "Action Trailer.aep"
I NEED A SOLUTION ON HOW TO UNLOCK THE AFTER EFFECT File, "Action Trailer.aep"
We seriously don't have enough information to help you.
What do you mean by "unlock"?
My wild, shot-in-the-dark guess is that you've got some sort of template that, when you try to save, says that it's locked. If that's the case, try using "Save As" instead. If that's not your problem, refer to Todd's link and provide more info.
Maybe you are looking for
-
Getting Username and Password into getConnection()
Hi, After my recent encounter with XSQLConnectionManager[Factory] interfaces I seem to have stumbled upon another problem. I'm trying to let the user login from a HTML login page. The user gives the system his/her password and usercode by entering th
-
Back button on IE 11 does not load the dropdown selections from previous form
We have a site in clasic ASP. There is a search criteria form with a few drop downs and a few radio buttons. While working in IE 11, When this form filled and submitted, the results show up. When the back button is hit, the previous form loads but th
-
RSS feed, repeated password prompts
I experience this issue on both Mac OS versions that I use: Mac OS 10.5.8 with Mail 3.6 and Mac OS 10.6.4 with Mail 4.3. I want to subscribe to an RSS feed for a blog. However, the blog and RSS feed are on a private, encrypted website. I can successf
-
Update IDM Account and Resource attribute
How can i update the resource attribute of users while updating their IDM account from file upload?
-
How can you find patches for a specific product?
Unless you have a patch number, it is a pain to try and find the latest patch for a particular product. In fact, it is a pain to find a product unless you have the name:)) 1. If you do not have the product name, but know the function/purpose, what is