How to programmatically display the keyboard?

Hello, all ...
When a UITextView's editable property is set to YES, tapping in the UITextView brings up the keyboard. This is all fine and good, but I want to set the focus to the UITextView and bring up the keyboard in code, without requiring the user to tap in the field. I remember in the old 1.x firmware, there were APIs to do this, but a lot of things changed in the transition from 1.x to 2.x. Would anyone give me a clue as to how to do this in 2.x?
Regards,
John
Falling You - exploring the beauty of voice and sound
http://www.fallingyou.com

Many thanks -- this did it

Similar Messages

How can I display the data in table in separate column?

I have a vi reading data one by one in the same column.
How can I display the data with separate column?
like this:
data 1 | read | read
data 2 | read | read
data 3 | read | read
(would you mind if I will ask for an example
because it is much easier for me to work
with an example)
THANK YOU.

If you're reading your data in as a 1D array, this is as simple as using the Reshape Array to make a 2D array. I've attached an example in LabVIEW 6.1 format. The example rearranges a single column of data fill several columns horizontally, but you can easily modify this code to fill the columns downward instead.
Attachments:
Data_Column_Example.vi ‏18 KB

How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
Attachments:
micliente.llb ‏183 KB
miservidor.llb ‏186 KB
rdsubvis.llb ‏214 KB

I down loaded your files but could use some instructions on what needs run.
It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I display the range for LastFullMonth in the header of a report

How can I display the month for LastFullMonth in the header of a report run in the past so that a report that ran sept 1 2009 selecting data for LastFullMonth (august 2009) displays sept 2009 in the header even if there is no data selected by the report?

Good,
Sometimes I answer these questions and completly miss it....
( lack of understanding on my part )

How can I display the HTML page from servlet which is called by an applet

How can I display the HTML page from servlet which is called by an
applet using the doPost method. If I print the response i can able to see the html document. How I can display it in the browser.
I am calling my struts action class from the applet. I want to show the response in the same browser.
Code samples will be appreciated.

hi
I got one way for this .
call a javascript in showDocument() to submit the form

How can i display the message

public class Userdefined extends Exception {
          Userdefined(String sparam){
          System.out.println(sparam);
          Userdefined(){
     private static int acno[]={100,105};
     private static double bal[]={100.00,200.00};
     public static void main(String args[]) {
          try{
          for(int i=0;i<2;i++)
               System.out.println("ACCCCNO------>"+acno[i]+"BAl------>"+bal);
               if(bal[i]<150.00)
          Userdefined udexp=new Userdefined("bal less");
          throw udexp;
          catch(Userdefined e){
               System.out.println("--->"+e);
How can i display the message "less amt" using my parmeterized constructor.

VinayTK wrote:
How can i display the message "less amt" using my parmeterized constructor.Erm ... what? You can't --- at least not with the stuff you've got there.
A properly formed question, with some idea of what you're trying to accomplish would be a huuuuge help.
Winston
BTW: Congratulations. At my age, 'first's in computing are rare; but it's definitely the first time I've seen an Exception class with a main() method.
Edited by: YoungWinston on Sep 1, 2009 9:46 AM

How can i display the error count

Hi I'm using jdev11g
How can i display the count of errors in validation error message pop up instead of displaying the entire list.

Searching the forum would help
Re: How to customize Error?

How can I display the vendor associated with result of my running total sum

I have a report that lists vendors with their most vecent order dates. I need to set up a rotation so that the vendor with the latest order date is next to be selected. I used the running total summary to pick the latest date. How can I display the vendor associated with result of my running total summary?

If your "latest" order date means the "oldest" order date, why don't you try this:
Go to Report tab -> Record Sort Expert -> Choose your order date in ascending order
This will make your oldest order your first record shown.
You can then create a running total count for each record.
Lastly, in your section expert under conditional suppress X+2 formula, write this:
{#CountRecords}>1
The result will only show the oldest record in your report.
I hope that helps,
Zack H.

On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password. How do I get the keyboard to appear??

On my new iPhone, at the Apps store, I tried to make a purchase, the popup screen shows my Apple ID and asks for my password, but no keyboard appears so that I can enter the password. How do I get the keyboard to appear??

On your iPad, delete the existing account then sign back in with the new ID and password.

How do I get the keyboard on my macbook pro to light up?

how do i get the keyboard on my macbook pro to light up?

Welcome to Apple Support Communities
What MacBook Pro have you got? Only Unibody MacBooks Pro (Late 2008 and newer) have a backlit keyboard. If you have one of these MacBooks Pro, you can set up its illumination in System Preferences > Keyboard. See > http://support.apple.com/kb/ht4882

How to programmatically place the field in the canvas.

Hello!
Can you please tell, how to programmatically place the field BLOCK1.FIELD1 in the canvas CANVAS1.
At the moment on the field value CANVAS = NULL.
And when opening the form error "FRM-41014 Cannot set attribute of null canvas item..."
Thank you

Youcannot assign a canvas at runtime. Yu have to specify int at designtime and it cannot be changed at runtime. if you need an item in more than one canvas, use a mirror-item (duplcate the item and set the property Synchronize with)

How can we display the list of Report Names in Dashboard Prompt?

How can we display the list of Report Names in Dashboard Prompt?

Hi,
No its not possible to display list of reports in dashboard prompts.
Can do this using SQl results in prompt(we write query checking out report names manualy),but its not easy thing if you are having many report names to be displayed.
Assign points and close your threads if answered.
Refer : http://forums.oracle.com/forums/ann.jspa?annID=939
Regards,
Srikanth

How can i display the Number instead of E

Hello Everyone ;
I am getting confused. How can i display the Number but the Exponential value is coming as E.
SQL> select sum(amount_sold) from sales;
SUM(AMOUNT_SOLD)
1.1287E+11
Table details ..
SQL> desc sales
Name                                          Null?        Type
AMOUNT_SOLD NUMBER
i want to change 1.1287E+11 to "numeric"
DB : 10.2.0.4
os : rhel 5.1

Just a minor correction on an obvious math/responding too fast error: 1.1287E+11 is a 12 digit number. You move the decimal 11 positions to the right which would add 7 zeroes to the value.
MPOWEL01> l
1 select length(to_char(1.1287E+11)), to_char(1.1287E+11,'999,999,999,999'), 1.1287E+11 "TEST"
2* from sys.dual
MPOWEL01> col TEST format 999999999999
MPOWEL01> /
LENGTH(TO_CHAR(1.1287E+11)) TO_CHAR(1.1287E+          TEST
                         12 112,870,000,000 112870000000the problem was that the OP failed to alias the sum result to the formatted column rather than the lenght of the data.
HTH -- Mark D Powell --

How do I display the complete time sequence for a video clip in iMovie?

How do I display the time complete time sequence for a video clip in iMovie?
I'm trying to create a movie for someone where they provided me the video clips and what time sequences they want extracted. For example: Video footage from time 5m22s to 9m:18s and 11m17s to 15m31s from the imported video clip. I know you can select video but I cannot figure out how to select from those requested time markers.
Any help would be apreciated.

Open the file using QuickTime Player and then open the Movie Inspector window.

After updating with ios7, I cannot proceed because I cannot enter my password since it uses Greek letters but the keyboard available is Latin. How can I change the keyboard to Greek?

After updating with ios7, I cannot proceed because I cannot enter my password since it uses Greek letters but the keyboard available is Latin. How can I change the keyboard to Greek?

try tapping holding on the key that would be most similar to the letter you want to enter, that will bring up a menu of other characters similar to that character and maybe the greek letter will be included in that menu

How to programmatically display the keyboard?

Similar Messages

Maybe you are looking for