How to properly install External Hard Drive

I'm trying to install my external eSATA hard drive on my 7216 HD DVR and it doesn't seem to be working. I get the notice to reboot the box and then I get the warning about it detecting the drive and that everything else on it will be deleted. I then click ok to accept and after that i get nothing. I then check my DVR recorded status and it looks like it only has the internal drive, percentage used is the same. How to i make sure the external is installed and what type of indication will i recieve? Does the DVR format the hard drive and if so does it let you know when it's completed?

I have the same issue.  I think the drive needs to be formatted in a format compatible with the set-top box.  I can't locate that ability in the menus for my Motorola box.  Anyone know how to format using the box?  Apparently reformatting via the computer is not acceptable???

Similar Messages

  • Can I install my time machine back up onto a properly formatted external hard drive?

    I have a MacBook Pro with a 750GB harddrive, with 500+ Gb of data on it.  Just before I traverse to Europe, I did a TimeMachine back up. 
    I now want to give my Mac to a friend, and buy a AirMac when I get home.  Even if I get the one with the largest drive it will not hold the full 500+'back up. 
    I have an 8 year old Mac Book pro at home as well.  It will be a few months before I can buy the new AirMac. So my question is ....
    Can I install my current backup on a properly formatted external hard drive, and will it then run like a computer --until I get my new AirMac?
    Thanks for your help (and please don't be too tough on me for what may see to de a dumb question)
    Soper777

    The Time Machine backup is not bootable
    You will have to install Leopard first

  • New MacBook pro how do I add external hard drive which has my entire iTunes library on it. Do I just drag external drive icon into iTunes preference box that shows where new itunes library is now located ie. On the MacBook pro.

    how do I add external hard drive which contains my entire iTunes library to new MacBook Pro. i want to keep iTunes library on external hard drive. But I want all my iTunes information:  artist, songs, albums, playlists on my new MacBook Pro.  I know about going to iTunes preferences- advanced-itunes media folder location.  At this point I don't know what to do   Do I drag external icon into iTunes media folder location box. I want to keep music files on external hard drive. I don't want to use macbook pro memory for my very large music files.

    I will request that your query be relocated to the iPhoto forum where knowledgeable iPhoto users will be able to assist you.
    Ciao.

  • HT201250 how do i add external hard drive to my time machine back up

    how do i add external hard drive to my time machine back up so that I may view the files independently on apple tv please?

    To elaborate on above.  I am looking to add about 300gig of photos on an external hard drive to TC. 
    Once I do this I believe I can then have itunes source its photos from TC without having them stored directly on my iMac? 
    Then I am assuming once I keep itunes on with home sharing I can stream these photos through Apple TV?
    My inital problem is getting the photos onto TC in an individual folder not just a backup folder....is that possible or what would you suggest please?

  • How do I access external hard drive connected to AirPort Extreme via iPad

    Hello,
    How do I access external hard drive connected to AirPort Extreme via iPad / windows laptop.
    I donot have a Mac and I use windows laptop.

    For your iPad, you will need an app, like FileBrowser, to access the external drive.
    For your Windows laptop, you would access the drive like any other network share. The basic format is: \\<servername>\<sharename>, where, in this case, the servername is the base station name and the sharename is the name of the external drive.

  • How do i transfer external hard drive content to macbook pro?

    How do i transfer external hard drive content back to my macbook pro?
    I do not see the hard drive icon or a back up icon, where should it be?

    What kind of drive is it - a large drive with a power cord, or a portable drive? Can you tell if the drive itself is actually on? (Is there a light, or a power switch, etc, can you hear it?)
    How is it attached to the Mac?
    On your Mac, click on the desktop, then go to the Finder menu (top left), click Preferences, then under the General tab, make sure that everything is ticked.
    If that works, you should then get the external HD icon appearing on your desktop.
    Hope that helps.
    Matt

  • How do I use external hard drive

    how do I use external hard drive and Photos? I keep getting a msg that there is not enough free space on your photo library volume - i even bought 500Gb of space on iCloud.... that didn't even work please help

    1. Drag the library to a volume formatted as Mac OS Extended, launch Photos with the Option key held down, select Other Library, and choose it. Alternatively, drag it to the Photos icon in the Dock.
    2. iCloud storage space is separate from that on the computer.
    (126243)

  • HT1338 how to copy a external hard drive to  other or  copy songs from one to  another

    how to copy a external hard drive to  other or  copy songs from one to  another

    Don't understand exactly what you want to do. Can you restate your question?
    You posted in the OS 10.3 forum instead of the MacBook Pro forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa  I'll request that Apple relocate your post.
    Also you show iOS 6.1.4 on your profile. iOS 6.1.4 only runs on a iPhone, not a MacBook Pro.
     Cheers, Tom

  • I am looking to back up my MAC, and I need to know how big of an external hard drive I need

    I am looking to back up my MAC, and I need to know how big of an external hard drive I need. How do I determine this?

    Well, they recommend at least 2 - 3 times the size of your hard drive if you are using Time Machine because that keeps making backups until it runs out of space (and then deletes the oldest to make room for the newest).
    However, if you prefer to have a bootable clone as a backup, you need about the same size as your hard drive since it is a perfect copy of your system (unless you want to partition and keep an older clone separately).
    So, check to see how large your hard drive is and go from there.

  • How to backup an external hard drive plugged into a time capsule using time machine

    How to backup an external hard drive plugged into a time capsule using time machine.
    I want to move my itunes library from the mac HD to an external plugged into the time capsule, but I want to be sure this drive will still be backed up by time machine.  I currentlly see no way to do this.

    There is no way. You can connect the drive to your Mac and remove it from the Time Machine exclusion list. Then it will be backed up, but that will stop when you reconnect it to the TC. While it's connected to the TC, you can copy it manually to another AirPort Disk by following the instructions here (with a slight modification):
    Using AirPort Utility to make a copy of the Time Capsule disk

  • How to convert NTFS external hard drive to FAT32 without loosing data?

    New mac user. How to convert NTFS external hard drive to FAT32 without loosing data?

    You have to off load and backup then.
    don't have backup drive ?
    Get one.
    Want another option? Paragon NTFS for OS X will provide write function to your drive, works with the most PC cases and drives (not all NTFS drivers for OS X do) and does so with fast I/O and low overhead.
    Not sure about using Seagate GoFlex as I seem to recall a number of threads reporting problems.
    Windows can do a convert -fs to NTFS just never tried the reverse from NTFS to FAT32 but I would not use FAT. I'd either erase and reload and use as Mac HFS Extended; or if you actually do need to use it with a PC user running Windows, the driver would be handy and better.
    Or your PC w/ Windows there are HFS drivers for Windows to mount and WRITE to a Mac formatted drive under Windows. There MacDrive has more and better support feature set.

  • How to connect an external hard drive and monitor a single port thuderbolt

    how to connect an external hard drive and monitor a single port thuderbolt

    Yu connect the HDD to your Mac and then the monitor to the HDD.
    The HDD  should have TWO T-Bird ports on the enclosure.
    Its called daisy chaining and up to five devices can be connected in this fashion.

  • How big should my external hard drive be for me to use Time Machine?

    i am a student and dont have a significant amount of files and that on my computer so how big shuld my external hard drive be?
    I will be using a normal external hard drive so will i be getting the full and the important features out of time machine if i do this?

    There are two questions you should ask yourself:
    1.  How long will it take me to fill up my internal HDD?
    2. How far back chronologically do I realistically expect to have go to retrieve data?
    I submit that in the vast majority of cases, a HDD of the same size as you have in your MBP will be ample.  If things change, adjustments can be made well in advance.  Its the very rare user that will generate multi GBs of data and file changes every session.
    As an example, I have a 750GB HDD in my MBP and a 750 HDD dedicated to Time Machine.  The oldest backup goes back 7 months.  At the rate that I update Time Machine, I expect the Disk to be filled and start deleting old data in about 3 months.  For me, that is more than sufficient.
    There is another aspect of backup strategy you should consider.  I would highly reccomend that you have a second external drive to store your most important files that may be duplicates of those in Time Machine.  All HDD will fail.  You just never know when that will happen.  If your Time machine disk expires, this way you are not left in a calamitious situation.
    Though some of my views may be in the minority, the final decision is always yours.
    Ciao.

  • HT3764 How to reformat an external hard drive using Snow Lepard to use for Time Machine

    How to reformat an external hard drive using Snow Lepard to use for Time Machine

    Use the Disk Utility in the /Applications/Utilities/ folder to erase it as Mac OS Extended (Journaled) with GUID as the partition map format(or APM if you're using a PowerPC Mac running 10.5).
    (73291)

  • How do you rename external hard drives?

    Hi, can someone please tell me how to name an external hard drive? many thanks

    Please refer to:
    https://discussions.apple.com/thread/3951253?start=0&tstart=0
    your answer is in that thread.

Maybe you are looking for

  • LSMW BAPI Open Sales Order Load - How to update conditions?

    Hello gurus, I was using the BAPI SALESORDER_CREATEFROMDAT2 to upload open sales orders. Wanted to overwrite the default PR00 pricing condition that gets pulled from the customer-material info record, with the price that was existing in the original

  • Spry slide show is choppy..what can I do to fix this.

    Are the spry slide show always so choppy? Do I have too many photos? (5) Here is my site mudroomstudios.com. Please, any advise would be appreciated. Otherwise I'll have to ditch the slides. thanks ~erin

  • Retrieve the PCD of the webdynpro Iview

    Hi! I have created an application with just one View. How can I retrieve the PCD of the iview of this application in the wdDoInit()? I want to be able to retrieve: portal_content/roleA/worksetB/pageC/iviewD. Another example is portal_content/roleX/wo

  • Could not enlist in transaction

    Hi All wls70 --> tux8.0 some times I get the following errors ==##[2004-07-08 08:43:57.516]##== HomeReceiver#[281] exception: interboss.util.InterException: -180001****??tuxedo????****TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0:ERROR: Could not enli

  • CPU used by this session

    Try to get CPU usage from within Oracle by monitoring "CPU used by this session" parameter in v$sysstat, but got some values over 100%. Is my calculation wrong or this is the problem of how Oracle collecting the data? Here's my calculation: CPU Usage