How to properly remove faulted Forte_Executor subagents?

Hi everybody,
When running distributed from the partition workshop, it often happens,
after a bad application failure, that
your server partition agent remains on your server in a bad state.
The consequence is :
- in EScript : When using "FindSubAgent" or "ShowSubagent" on the
faulted agent, you get a bunch of Forte
exceptions telling you that this agent has a big problem
- in EConsole : When you try to open the "Forte_Executor_<NodeName>"
partition, EConsole does an abnormal exit
because it does not handle the exceptions mentioned before.
Does anybody know a good, clean means to remove these faulted agents ?
(other than restarting the node manager)
I tried to identify the pid and use kill -9 to remove it, but sometimes I
probably killed the wrong process and things
became a terrible mess after that.
Thank You !

Similar Messages

How to properly remove replicas from iDS 5.0 servers

How to properly remove replicas and their associated entries from directory servers?
This question may seem trivial, however the reason I am asking this is that shortly after replicas are removed from supplier and consumer servers, slapd.exe generates an error on both machines, usually within 2 to 3 minutes after removal. That causes servers to restart and any other program connected to one of those two machines has to be restarted as well (or at least recconnected to them), which is very annoying, especially if those programs are in the middle of some processing and need to write or retrieve something from LDAP server.
I am using iPlanet Directory Server 5.0 SP1, on two Win2K machines. One server has a single master replica, other is the consumer - a tipical test configuration.
The documentation (Administrator's guide) is quite extensive in describing how to set up replication, but there is nothing on how to bring replicas down.
I can only imagine that entries should be removed in reverse order as they were created (directory entries, replication agreement, databases, suffixes, etc...), and that has been tried numerous times. Nevertheless, the problem persists.
Can anyone please help me?

It would help if you could tell us which error is occuring on the servers...
Anyway the way to stop replication is :
1) Remove replication agreements.
2) Disable Replica.
That should be enough.
You don't need to remove the entries, database not suffixes.
Regards,
Ludovic.

How to Properly Remove iPhoto Alias Folders

Hello Team,
Over the many years as an iPhoto user, I have made many upgrades to my iPhoto Library. I have noticed that each upgrade comes with its quirks. The one that is recently bugging me are the alias folders that are created within iPhoto when you 'Show Package Content' in Finder.
For example, showing the contents of iPhoto shows that my files are no longer located in the 'Originals' folder, but now in a 'Masters' folder. I have a 'Library6.iPhoto' along with a 'Library.iPhoto'.
There are a few other alias folders that I'm sure came with upgrades since when I create a fresh iPhoto Library, none of those folders are present.
So my question is... "How do I (or iPhoto) remove these folders properly?"
I'd like to have all the photo nice and clean with the most up-to-date file hierarchy and not some fragmented linking from yesterday. Why does Apple do this? Is there a good reason?
Also to note, I have tried copying a smaller library with the same issue and tried rebuilding the database, library, thumbnails, etc without any luck of making them disappear.
Thoughts??
Thanks!!

Was hoping there was an Apple sanctioned consolidation tool that would convert everything to the new heirarchy.
The "Apple Sanctioned" consolidation tools are the iPhoto Library First Aid tools. They will rebuild the iPhoto Library in exactly the way how it is supposed to be organized.
Back up your library, hold down the ⌥⌘ command keys, launch iPhoto and run "Rebuild Library". The result should be very similar to what you are seeing now. However, rebuilding shpuld only be done, if iPhoto is not working properly or before a software upgrade, that will reorganize the library.
If you want to access your photos, there are more versatile and safer ways than digging around in the package:
See Terence Devlin's user tip: How to Access Files in iPhoto

How to properly remove "Network" from Windows Explorer and Save Dialog boxes?

I've recently rolled out Windows 7 and noticed that in some applications (Office 2003 - yes we are due for an upgrade - happening later this year), when a user clicks the down arrow in a "Save As" dialog box to view the available locations - a
list of seemingly every computer in the broadcast domain is generated and displayed. This takes about 30-45 seconds. I don't want my users to be able to view a list of every computer in their broadcast domain, and I especially don't want them to
be presented with said list every time they try to save something. In newer apps, the list is not automatically displayed but is still accessible by clicking the "Network" selection.
What is the proper way to remove this?
I've tried the following:
1) Disabling the NetBios over TCPIP service - works but prevents other things from working properly.
2) Disabling the Computer Browser service - does not work.
3) Changing HKEY_CLASSES_ROOT\CLSID\{F02C1A0D-BE21-4350-88B0-7367FC96EF3C}\ShellFolder\Attributes from b0040064 to b0940064 as suggested here -http://www.sevenforums.com/tutorials/39699-network-add-remove-navigation-pane.html
. This seems to work but I cannot find anything that says this is supported by Microsoft and I am wary of what side effects may occur.
4) Using a GPO to enable the "No Computers Near Me in Network locations" and "No Entire Network in Network locations." - no change.
It seems like there should a simple way to do this as I can't be the only admin that doesn't want their users browsing a list of every computer on the network.
Thanks!

Hi,
I will mark my first reply as answer. It could help other communities here who have the same issue.
Thanks for your understanding.
Regards,
Leo Huang
TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to properly remove e17 and all its dependencies?

Hello,
I installed a while back e17 and would like to do some clean up...
Could someone confirm if all the below package (except notify-sharp-svn) are indeed e17 ones?
[10:30:54][root@phusis]
[/home/lcoumetou]Arch64# pacman -Qe | grep svn
e-modules-extra-svn 41098-1
e-svn 41080-1
e_dbus-svn 41042-1
ecore-svn 41085-1
edje-svn 41103-1
eet-svn 41307-1
efreet-svn 41084-1
eina-svn 41100-1
elitaire-svn 40502-1
embryo-svn 41042-1
emprint-svn 40505-1
engrave-svn 40228-2
entrance-svn 41032-1
epsilon-svn 40978-1
esmart-svn 41098-1
etk-svn 40990-1
evas-svn 41104-2
ewl-svn 41096-1
exhibit-svn 41086-1
exml-svn 40505-1
notify-sharp-svn 3032-1
Is there an easy to remove e17 and all its dependencies or do I have to do it manually for each package?
Thanks in advance
Ludo

Thanks!
The following did the trick:
[11:28:41][root@phusis]
[/home/lcoumetou]Arch64# pacman -Rcsn e17-svn e17-extra-svn
e17-svn not found, searching for group...
:: group e17-svn:
e-svn e_dbus-svn ecore-svn edje-svn eet-svn efreet-svn eina-svn
embryo-svn evas-svn
Remove whole content? [Y/n]
e17-extra-svn not found, searching for group...
:: group e17-extra-svn:
e-modules-extra-svn elitaire-svn emprint-svn engrave-svn entrance-svn
epsilon-svn esmart-svn etk-svn ewl-svn exhibit-svn exml-svn
Remove whole content? [Y/n]
checking dependencies...
Remove (21): exhibit-svn-41086-1 etk-svn-40990-1 entrance-svn-41032-1
engrave-svn-40228-2 elitaire-svn-40502-1 ewl-svn-41096-1
esmart-svn-41098-1 e-modules-extra-svn-41098-1 exml-svn-40505-1
epsilon-svn-40978-1 emprint-svn-40505-1 e-svn-41080-1
efreet-svn-41084-1 edje-svn-41103-1 embryo-svn-41042-1
e_dbus-svn-41042-1 ecore-svn-41085-1 evas-svn-41104-2
eet-svn-41307-1 eina-svn-41100-1 libmpd-0.18.0-1
Total Removed Size: 61.74 MB
Do you want to remove these packages? [Y/n]

HOw Can I remove faces from the URL

I know that it's in the web.xml file but as soon as i remove the faces part from the file nothing works. Someone please tell me how to properly remove "faces" from the url. Example http:.//localhost:8080/croot/Page1.jsp
Thanks in advance

I know that it's in the web.xml file but as soon as i remove the faces part from the file nothing works. Someone please tell me how to properly remove "faces" from the url. Example http:.//localhost:8080/croot/Page1.jsp
Thanks in advance

Axis fault using 9514 module. How do I remove it?

Hello,
I have a 9074 cRIO controller, and i made a project with a simple VI for a single axis move. I set up a new axis on Module1 (9514) and i just moved it up in the project file tree under "My System" from the "Remote System". Than, I called it as a resource in my VI, but there was no motion on the servo motor. When I looked in the controller, the red LED was light on which indicates "axis fault", but I couldn't find in the manuals what does it actually mean, and how do I remove the axis fault? I tried rebooting the controller, but the LED was still on after it initialized back.
I would really appreciate any help from anyone.
Thank you, Marko

Hello Markopp,
In your VI, do you have Initialize Controller VI implemented? With that VI, it will call Clear Faults VI which clears all modal errors and drive faults on all axes.
Andy Chang
National Instruments
LabVIEW Control Design and Simulation

How do I properly remove an app from iphone6

How do I remove an app forever properly?
Marquis1562

touch and hold the icon when it starts to wiggle press the cross in top corner
OR
Go to Settings and tap General > Usage > Manage Storage.
Select any app to see how much space it uses, and tap Delete App to remove it.

How do I properly remove programs?

This is a long story, so I'll give the short version...
I was trying to update my Compressor software, but after I installed the update, it wouldn't open. I realized I had installed a version of compressor that needed OSX 10.4 or higher, I'm using 10.3.9.
I took compressor from my applications folder, trashed it and installed the original version I have. It still refused to open, I beleive the OS still thought I was trying to use the updated version. Don't ask me why, but I thought if I reinstalled OSX 10.3.9 that this would clear it all up. That made everything worse.
Now, I'm running into issues like this...
I had to reinstall my version of quicktime 7, because OSX 10.3.9 only has an older version of 6. When I did, I lost my Quicktime 7 Pro features. So, I reinstalled QT7 and went to re-register my QT7 Pro key again so that it would work...but the key number was already filled in. So, it's telling me I have QT7 Pro...but I can't use it due to some confussion in my OSX.
Other programs are acting like this too (I have the newer versions installed, but OS is only running the older versions, not the updates).
So, I think I can fix this if I knew how to properly uninstall a program from my Mac. If I completely got rid of all traces of QT, reinstalled everything it should work fine...how do I do this? I always thought you just moved an app to the trash and you were done.

You have to use a application like AppZapper or SuperPop to uninstall applications properly. (especially programm's that where installed with a installer, "drag-and-drop" applications don't really need to be un-installed like this).
Hopefully this solved your problem.
(Please see the "solved" button above this message)

Does anyone know how to force remove itunes so i can install new update

I am trying to install the update but i keep getting a message that some parts of itunes is missing on my computer. I was told i need to uninstall itunes and reinstall it. when uninstalling from control panel i get the same fault and cannot uninstall. How do i remove the software so i can reinstall it.

The error tells me that im missing Itunes.msi and that the network is unavailable.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

How can I remove calendar alerts from my iPhone?

My iPhone 4 (iOS 6) seems to be adding calendar alerts on its own and I cannot for the life of me figure out how to remove them. I use iCal on my Macbook Pro (running Mountain Lion 10.8.2) to sync my calendar events. None of my events on iCal have alerts set to them and I have disabled all alerts in my iCal preferences. Yet, for some reason, when I look at a calendar event on my iPhone, an alert is set for it.
How do I remove these properly? I do not simply want to silence these alerts, but figure out how they got there in the first place and remove them completely. For comparison's sake, I've included an image of the event from iCal and the event from my iPhone.

Hi pjdemeo,
I understand you want to delete all of the photos from your iPhone. As a precaution, I would suggest importing the photos and videos from your iPhone into your computer. This will give you a backup for the images, and after import you will be asked if you want to delete the photos.
Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support
https://support.apple.com/en-us/HT201302
The iPhone User Guide has instructions for deleting photos directly from the device:
Organize photos and videos - iPhone
http://help.apple.com/iphone/8/#/iphf14943e
Delete a photo or video from Photos. Tap the Photos tab, tap the photo or video, tap , then tap Delete Photo or Delete Video. Deleted photos and videos are kept in the Recently Deleted album on iPhone, with a badge showing the remaining days until the item is permanently removed from iPhone. To delete the photo or video permanently before the days expire, tap the item, tap Delete, then tap Delete Photo or Delete Video. If you use iCloud Photo Library beta, deleted photos and videos are permanently removed from all iOS 8.1 devices that use iCloud Photo Library beta with the same Apple ID.
Cheers,
- Judy

How do I remove my credit card info off my iphone

I have an iphone 4 and it was working fine until the day I decided to use my MasterCard to download a song. Now I have $30.00 on my itunes card in my phone and it keeps going back to my MasterCard which has no money on it. Has anyone had this same problem and how do I remove my MasterCard info off my phone?! I've went through my AppleID viewed it, and it won't let me make any adjustments?? PLEASE HELP

By default, iTunes store/App Store purchases debit an iTunes gift card before an associated credit card. Are you sure this gift card was redeemed properly, & shows credited to your account?
You won't be able to select "None" as a payment method until you have a properly credited iTunes gift card.

How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?

How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?
< Edited by Host >

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

HT201272 How do I remove an App from My Apple cloud

How do I remove an App from my Itunes Account

You can't permanently delete any items from your purchase history, all you can do is hide them so that they don't show in the Purchased tab for re-downloading : http://support.apple.com/kb/HT4919
But that doesn't appear to be working properly on iOS 7 - hiding the app on your computer and then logging out of your account on your phone by tapping on it in Settings > iTunes & App Store and then logging back in may make it hidden on it.

I am trying to listen BBC radio news from BBC App, but on pressing the button I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

I am trying to listen BBC radio news from BBC App, but on pressing the button "live radio" I always get the error "there was an error playing this radio feed". What is the source of this error and how can I remove it?

That is probably just a generic error message and you might not ever know what is causing it. Assuming that you have been able to play live radio with the app in the past (I know nothing about the app) and assuming that all other Internet related functions (Safari, email, etc.) are working properly on your iPad, quit the app completely and reboot your iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that fails to resolve the issue, you might want to reboot your router, unplug it for about 30 seconds and then plug it in again.

How to properly remove faulted Forte_Executor subagents?

Similar Messages

Maybe you are looking for