How to properly size Coherence? (3.6)

My Customer needs to setup a new Coherence environment and needs to understand the sizing that of the systems in term of CPU and memory.
Is there any tool that can help?
Thank you
Chiara

Hi Chiara,
In order to get a better understanding of sizing in terms of CPU and memory, I would suggest your customer to take a look at the Coherence Best Practices document available at http://coherence.oracle.com/display/COH35UG/Best+Practices
Also, in order to achieve maximum performance your customer should also take a look at the Performance Tuning guide available at http://coherence.oracle.com/display/COH35UG/Performance+Tuning
If your customer is going to use Coherence*Extend, then the Best Practices for Coherence Extend document available at http://download.oracle.com/docs/cd/E14526_01/coh.350/e14509/appbestextend.htm would be useful too.
Finally, to monitor the Coherence cluster, your customer can use JMX tools as explained at http://coherence.oracle.com/display/COH35UG/How+to+Manage+Coherence+Using+JMX
Hope it helps.
-Cris

Similar Messages

  • How to properly reinstall Aperture

    Good morning to you all;
    I have been using Aperture for over a year and like the way it works. However, lately one of my plug-ins started acting strange and since me and the developer have exhausted all solutions, I would like to reinstall Aperture and see if it helps. As my library holds 15000+ pictures (98% of them referenced) and is around 60GB in size, I have a lot to lose.Mind you, I have it double backed up, but still would like to do the reinstall properly. *Could you pls advise me as to how to properly reinstall Aperture?* Thank you

    Jade; thank you for your reply. I, indeed, only wanted to reinstall Aperture. No reimporting etc. Too much work. In the mean time I found the below info which covered all my questions. My problem is that when I select (cherry pick) several photos (lets say 80+) and try to upload them via Aperture to Picasa Web Plug in from Ubermind, the plug in tries to log in and then freezes. I am talking to their support guys and they are in deed very fast in replying. I just wanted to have a clean reinstall of Aperture to make sure there was no corruption.Any ideas are more then welcomed.
    For reinstalling Aperture, I found these tips:
    Another approach you might consider is reinstalling Aperture. To do this
    effectively, you need to remove the application and its receipts, then
    install Aperture and use Software Update to install additional updates. You
    don't have to remove everything that was installed with Aperture. Follow
    the steps below to completely reinstall a fresh copy of Aperture.
    Note: Make sure that you have your installation discs nearby before
    starting this.
    1. Open the Applications folder.
    2. Drag the Aperture application to the Trash.
    3. Go to /Library/Receipts.
    4. In the Receipts folder, select the "Aperture.pkg" and
    "ApertureSampleProjects.pkg" files. Note: If you have Aperture 1.5
    also select the "PluginManager.pkg" file.
    5. Drag the those .pkg files to the Trash.
    6. Insert your Aperture installation disc and install Aperture.
    7. When finished, choose Software Update from the Apple () menu to
    update your software to the latest version.
    For further information on settings or installation, please refer to the
    Aperture documentation available on your installation discs.
    also see here:
    http://blogs.oreilly.com/aperture/2008/01/a-fresh-start-with-aperture.html
    also AppZapper is a good tool for this as well ...
    Thank you all for help

  • How to properly disconnect a Mini Display Port (MDP) from a Macbook Pro 2012, 1,9?

    Hello:
    I was wondering if any Macxperts out there had any idea on how to properly disconnect a MDP Thunderbolt Cable from a 2012 1,9 Gen. Macbook Pro. From my experience with older Macbooks the command was "Command + F7" or something of the sort.
    On my Macbook Pro 2012, there is no such button or commend to properly disconnect the plug; as if one were to disconnect or "eject" an external HD. I have read some articles on Google that some people just disconnect the plug and that action is sufice to disconnect an external video projection (Ex: Flat Screen Samsung).
    Can a Macxpert or Genius comment on this piece of information? I would really apprecite some light shed on this situation. I just don't see unpluggin a cable connected to a video source enough to properly shut off a connection with out damaging the Macbook Pro's video card.
    Thanks
    A

    Hello, Niel:
    I just answer my own question. Forgive me but I am not up-to-date on the techlingo (Hot Swappable) but I just googled the term and found my answer.
    Thanks again.
    Best,
    A

  • I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    I transferred itunes library from old PC to new PC. The content all shows when I launch iTunes on the new PC now. The previous content does not show in iTunes but folder still looks like it is on hard drive on new PC. Suggestions on how to properly merge?

    Before you connect any device to a new library go to the Devices tab of the the preferences panel via Edit > Preferences (Windows) or iTunes > Preferences (Mac) and ensure the box next to Prevent iPods, iPhones, and iPads from syncing automatically is ticked. You can now safely connect the device to your computer without the danger of media being automatically deleted or overwritten.
    To get all your content off your connect your iPad to your new computer.
    Then use a 3rd party piece of software to transfer your content
    I have found Senuti useful but there are others listed in the article I linked to in a previous post.
    https://discussions.apple.com/docs/DOC-3991
    That will let you transfer your non purchased content
    For Purchased content log in to iTunes on the new computer
    In Itunes Store click on Purchased under the Quick Links section on the right.
    Download any music by clicking on the cloud button

  • How to properly configure a home network using both Mac and PC computers

    Is there a book or set of guidelines that can tell me how to properly configure (exact specifications) my computers in a home network? Here is what I am trying to do and using:
    1) Three computers: iMac (late 06 ver), Macbook (newest version), Dell laptop. The two Macs are using Leopard and the PC is XP.
    2) Bellsouth modem which feeds into the Airport Extreme Base Station (AEBS)
    3) The AEBS has a USB hub which is connected to a external hard drive and two inkjet printers. A third laser printer/scanner/fax machine is connected to the AEBS via ethernet.
    4) All three computers use a wireless connection to the AEBS.
    I would like the following:
    1) Have a secured and password driven network - don't want outsiders connecting to the nework without permission.
    2) All computers to be able to access the USB printers and ext HD.
    3) The two Macs to read/write to each other with password access
    4) The iMac to have read/write capabalities over the PC via VSFusion or Bootcamp if possible.
    Currently, all three have Internet access via the AEBS and can print on the ethernet printer. Both Macs can see the Bonjour USB printers and print (however they to do not display on the AEBS configuration display utility and neither does the ext HD). The USB ext HD is shown on the iMac desktop and I have access to it, but does not display on the MacBook. I have not checked if the PC sees the external HD and it really does not matter if it ever does, although it would be nice.
    I am hoping that there is some standard configuration that I can "cut and paste" that is generally used to allow a home network to share resources while still being secure.
    Any advice and help is greatly appreciated.
    Thanks,
    Andrew

    Andrew,
    What you would like is fairly complicated so this will probably be a lengthy post, but hopefully I can assist you.
    As others here have pointed out, networks can vary widely, but the best networks have one element in common: planning. The first thing you need to think about is how you would like all of these systems to cooperate. For instance, do you want one of the machines to serve files to the others and be a central repository, or are you just interested in having them share documents on occasion so that you don't have to carry around, say, a USB key all the time? That said, here is a basic list of things I think you should look into.
    1. Network Basics
    First step is to get your local network set up. I'd go for WPA or WPA2 wireless security as they are relatively strong standards and you can use human-readable passwords. Additionally, unless you have an explicit need for someone outside your network to initialize a connection (Windows' RDP for instance), do not allow any passthroughs or port redirects on your AEBS.
    2. Network Topology
    Decide how you want computers and networked devices to identify themselves and their relative locations in the network: in short, do you want static ip's or dynamic ip's? Most of the time, static IP's can be assigned on a DHCP router, the trick is to assign the statics higher than your number of devices (or lower on some routers - for instance Linksys routers start DHCP at 192.168.1.100 but you could have statics from 192.168.1.2 to 192.168.1.99). For instance, it is impractical to set a laptop to static because I'm often in coffee shoppes and other environments that assign via DHCP; on the other hand, it's a good idea to have a printer be static so that you always know where to find it. So, I have 10.0.1.x network (default on AEBS), and the printer is 10.0.1.24, since the likelihood of my encountering an IP conflict with 4 computers on the subnet is virtually zero. If you configure a static device behind your AEBS, defaults are usually
    Default Gateway 10.0.1.1
    IP Address 10.0.1.(your choice)
    Subnet Mask 255.255.255.0
    3. File-sharing.
    3a) Mac OS X has a built-in SMB/CIFS (Windows file & printer sharing protocol) client, and a basic SMB [samba] server can be enabled in the sharing preference panel (enable file and/or printer sharing). Windows XP can use these shares, but must authenticate. For that reason, you may not be able to see your shares in the Network Places browser, however you should be able to get to them by mapping the network drive (tools menu) or executing RUN with \\computer.name\share.name. You will then be able to type in your credentials. I would also suggest relatively simple names for the Macs in question (set in Sharing preference pane). Typing Andrew's-iMac-G4 in every time you want to find it will get irritating after a while to say the least, especially if you need to troubleshoot.
    3b) The reverse works similarly. You can Connect to Server... from Finder to get to the Windows shares. To do this you must have Windows File and Printer sharing enabled (most easily through the Network Setup Wizard in Control Panels - Use Classic View). It's really easy if your account names and passwords are identical on the Mac and PC, because when loading user profiles, the Mac will generally automatically try to authenticate against the Windows machine with your Mac logon credentials. (Windows seems to do this against the Mac as well) You can write an Applescript or there are some PLIST modifications you can make to mount Windows shares at login.
    4. Printing
    I'm not exactly sure what you had in mind here since I'm not sure what's connected to which computer or directly to the network. If it is possible, I personally find putting my printers directly on the network to be the easiest thing. Especially if printing large PDF or graphics files, the spooling on the host system can really slow the computer down, and slow down printing. For example, I used to have a laserjet on a Windows box and had to print a very large file. Going through a Win print server, it only printed a page every 30 seconds, but when I got a jetdirect adapter, the whole thing was done in under two minutes. If you have HP Printers, I would recommend the jetdirect print servers (I have used with both a laserjet and a supposedly unsupported color inkjet).

  • How do you size a picture in Photoshop Element 11

    How do you size picture's to be sent in a email? On the old version I could figure it out be now on this version I can find where to do this. Also how do you make a collogues in Photoshop Elements 11
    Thank you for your help, Jack Frowein

    if you are saving your image as jpeg and really dont care much about the pixel dimension and just worry about the file size, I think using lower jpeg compression ratio is a better option.  For example: if i want my image to have really small file size, I would simply use a lower jpeg quality(probably Medium or low) while saving the file.
    Another easy solution would be to use Save for web, which shows you enough save options to precisely control your file size and dimension

  • How to increase size of fonts in Menu bar and in Safari toolbar?

    How to increase size of fonts in Menu bar and in Safari toolbar?  Munu bar and Safari toolbar  fonts too small on a 24" iMac screen.
    Thanks in advance !

    If you want to change the size of the font of a TextEdit text document, you do it in the preferences. Alternatively, if you want control over the size of the fonts, make it a Rich Text document, and then you can change the font size. You can either use the Larger or Smaller options, or Show Fonts to choose a size. You can elect to have new documents be Rich Text in the preferences as well.

  • How to increase size of font in Citrix

    How to increase size of font in Citrix  (while I am remoting to the desktop of my work PC)?

    Guruvulu,
    Not sure whether it helps, but try this trick: set imageSource to some transparent GIF with necessary height.
    Valery Silaev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • How programmatically set size of report element in Java

    In topic
    [How programmaticaly set size of some field?|How programmaticaly set size of some field?]
    someone changing programmatically report element, but I think this part of code
    is in .NET framework
    For example I mean something like following snippet
    BoxObject box = (BoxObject) reportClientDocument
    .getReportDefController().findObjectByName("headerBox");
    BoxObject newBoxObject=new BoxObject(box);
    Border border=new Border();
    border.setBorderColor(new Color(255,255,255));
    newBoxObject.setBorder(border);
    newBoxObject.setFillColor(new Color(255,255,255));
    reportClientDocument
    .getReportDefController().getReportObjectController().modify(box, newBoxObject);
    Why I think this is in .NET framework because java object "ReportClientDocument" don't have "getReportDefController()" method (I donu2019t know .NET).
    What I want to do, I want to take "Details" (part of report) and change size.
    If there is no way to take "Details" how can I take other report element e.g. Text Object

    Ernest,
    What enviroment are you working in? Because my ReportClientDocument object does have the getReportDefController method. How are you declaring your object?
    Try something like:
    private static com.crystaldecisions.sdk.occa.report.application.ReportClientDocument myRCD;
    BoxObject box = (BoxObject) myRCD.getReportDefController().findObjectByName("headerBox");
    Cheers
    Darren

  • How change font size when typing on iPad air

    How change font size when typing on iPad Air

    You can change the font size for apps that use the large text feature in Settings>General>Accessibility>Larger Text>On.

  • How to dertermine size of a perticula Client in sap application server

    R/S all,
    Kindly guide me for "How to determine size (hard disk space) of a perticular client in SAP Application Server "

    Hi,
    Have a look at the [SAP Note 118823 - CC-ADMIN: Size of a client|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=118823].
    You can use the report RSSPACECHECK to check the size of SAP client. You can also use the test run option in client copy to determine the size os a client.
    Hope this helps.
    Regards,
    Varadharajan M

  • Installing Windows 7 via Bootcamp - your opinions on how large partition size ?

    Hi there, I am installing Windows 7 Professional SP1 on my iMac with the following specs :
    27in Core i7 3.5 GHz with 16GB RAM
    256 GB flash storage (pure SSD)
    I will be running the following programs :
    (In descending order of program size)
    Adobe Acrobat 11
    Microsoft Office 2010 (entire suite)
    Fedex Ship Manager
    Google Chrome
    iTunes
    Microsoft .Net Framework
    SnagIt
    Java
    VLC Player
    AVG Antivirus
    PPS
    QuickTime 7
    Mozilla Firefox
    uTorrent
    I don't run Autocad, Photoshop or any other graphics-intensive software.
    I'm not sure ifI I will install games or not .... I might !!
    In your opinion, How much partition size should I allocate for the Windows 7 Professional installation ?
    Thanks.

    Thanks BobTheFisherman.
    Actually. Let's say i use 80gb for windows partition. What am I saving the rest of the 176GB for ? For maverick ? If let's say I only use windows what's stopping me to use the maximum possible (211GB according to the installer) for windows ? Just
    Thanks

  • How to properly reference libraries when building executable

    Hi guys,
    So I've been working on porting a VI developed on 2009 Labview on Windows over to 8.2 on Linux. Initially I was having some problems because the program seem to have broken after the port but we realized it was some compatiblity with the TCP communcation functions. We solved it by writing some new TCP open/send/recieve/close functions in C and called the functions through a sub VI calling a library function node.
    Now, the program runs completely fine on labview on the development machine where I have all the files. However, things seem to break down when I build the program as an executable to be run on a machine without labview. 
    From what I can tell, it seems as though the library function node is unable to find the proper .so file to reference. However, I've tried numerous methods of passing the correct path of the .so file to the library function no but nothing seems to work. I've tried implementing path on the sub-vi level then up to the vi level but the results are all the same, the program works in labview fine but the TCP communcations break when i compile.
    So can anyone tell me or point me to a good tutorial on how to properly implement and build with library function nodes and also properly referecing the required .so files?
    Thanks guys,
    Jason.

    Hi Jason,
    If you open example finder in LabVIEW (Help>>Find Examples…)  and search DLL, you may find the “External Code (DLL) Execution.vi” to be helpful.
    There is some thorough documentation on how to use external code in LabVIEW at the following link:
    http://www.ni.com/pdf/manuals/370109a.pdf
    I would double check to make sure you are compiling the C code to the correct format.  To run it on a Linux machine the .so file must be in the ELF file format, not the PE format (which is what DLL files use).
    I am also wondering why you need to re-write the TCP functions, there should be a Linux LabVIEW equivalent function for each of the LabVIEW Windows functions.
    Regards,
    Shane C
    Regards,
    Shane C
    Applications Engineer
    National Instruments

  • How can I size a TIFF in Lightroom?

    How can I size a TIFF in Lightroom to 50 MB?
    It's so easy in ACR.
    Thanks
    Dennis Hallinan

    You can create a Cunstom Export Preset if you are doing this regularly.
    Don
    Don Ricklin, MacBook 1.83Ghz Duo Core, Pentax *ist D
    http://donricklin.blogspot.com/

  • How to reduce size pdf file with 10.5.8

    How to reduce size pdf file with 10.5.8, I know it can be done with snow....

    Look at this link.
    https://discussions.apple.com/thread/1292868?start=0&tstart=0
     Cheers, Tom

Maybe you are looking for