How to protect variant in selection screen for particular user.

Hi experts,
How can i protect variant from other users in a report program , i.e an employee should not be able to execute the program (authorization should failed ) if he is not user.

Hi gurug,
As far as I know, this is not supported by SAP standard. One solution is not to allow users to run a report by choice (standard in most companies) but allow the user a certain transaction. Then you can create variant transactions and allow certain users certain transactions.
[How to create transaction variants in SAP to hide information|http://searchsap.techtarget.com/tip/0,289483,sid21_gci1213076_mem1,00.html]
may be useful.
Regards,
Clemens

Similar Messages

How to define our own selection screen for logical database in abap-hr?

Hi Friends,
Can u please help me
How to define your own selection screens for logical database.
we use to do like(goto->attributes-HRReportcatagerious ).but How to desin using customer table like t599c, t599f and how to add to my logical database?
Thanks in advance
charan

check out this online help
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/dba65c35c111d1829f0000e829fbfe/frameset.htm
Regards
Raja

How to set Variant as selection-screen

I have a variant i want to set that variant as selection-screen can anyone please tell me how to do that

Hi Pradeep,
What is your requirement?
If you just want to create the variant for the selection screeen, then after entering the values on selection screen just press SAVE button.
Regards,
Atish

How to put Layouts in selection screen for ALV

Dear All,
I have developed an ALV report . The users will create many layouts and save it. The requirement is that:
In the selection screen , they need to get the list of saved layouts and select one from that so that they need not have to select layout after running the report.
That means .. they want to select the layout before running the report.
Hope that you understood my problem and will help me out...
Thanking you,
Shankar

Hi,
PARAMETERS P_LAYOUT LIKE DISVARIANT-VARIANT.
INITIALIZATION.
*Get Default display variant
PERFORM F100_DISPLAY_DEFAULT_VARIANTS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LAYOUT.
*Value Help for Layouts
PERFORM F1001_VALUE_REQUEST.
*&      Form F100_DISPLAY_DEFAULT_VARIANTS
     Initializing ALV Values                                        *
FORM f100_display_default_variants.
w_variant-report   = sy-repid.
w_variant-handle   = c_handle.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            i_save        = c_a
       CHANGING
            cs_variant    = w_variant
       EXCEPTIONS
            wrong_input   = 1
            not_found     = 2
            program_error = 3
            OTHERS        = 4.
IF sy-subrc EQ 0.
    p_layout = w_variant-variant.
ENDIF.
ENDFORM.
*&      Form F1001_VALUE_REQUEST
      Get the values for the layout.
form F1001_VALUE_REQUEST.
DATA: lv_exit        TYPE c,
         lw_variant    LIKE w_variant.
w_variant-report   = sy-repid.
w_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
       EXPORTING
            is_variant    = w_variant
            i_save        = c_a
       IMPORTING
            e_exit        = lv_exit
            es_variant    = lw_variant
       EXCEPTIONS
            not_found     = 1
            program_error = 2
            OTHERS        = 3.
IF sy-subrc IS INITIAL.
    IF lv_exit IS INITIAL.
      p_layout = lw_variant-variant.
    ENDIF.
ELSE.
    MESSAGE i029."No layouts found
ENDIF.
endform.                    " F1001_VALUE_REQUEST
Hope this helps.
Regards,
J.Jayanthi

Skipping Selection Screen for a report program

Hi guys,
I have a report program that works in 2 modes - Create and modify ( There is a toggle button in the ALV report). Its an editable ALV grid. There are 2 tcodes - zcreate and zmodify to access the same report in 2 above modes. For zmodify, i have a selection screen. How do i skip the selection screen for zcreate ?
Here is my report program
REPORT ZSWR_RCKDVOLS .
INCLUDE ZSWR_RCKDVOLS_TOP.
INCLUDE ZSWR_RCKDVOLS_CLDEF.
INCLUDE ZSWR_RCKDVOLS_CLIMP.
INCLUDE ZSWR_RCKDVOLS_SELSCR. " Selection Options are written in this.
INCLUDE ZSWR_RCKDVOLS_PBO.
INCLUDE ZSWR_RCKDVOLS_PAI.
INCLUDE ZSWR_RCKDVOLS_FORM.
INITIALIZATION
initialization.
perform layout_build.
AT SELECTION-SCREEN
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
                      into lv_plnt
                      where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
END-OF-SELECTION.
CHECK: NOT gi_zswt_rckdvols[] IS INITIAL.
set SCREEN 100.        "Main Screen
A sample code will be greatly helpful.
Thanks,
SHK

So if we were to implement this in your program.....
report zswr_rckdvols .
include zswr_rckdvols_top.
include zswr_rckdvols_cldef.
include zswr_rckdvols_climp.
<b> include zswr_rckdvols_selscr. " Selection Options are written in this ".
* Add this line into your selection screen include.
parameters: p_switch type c no-display.</b>
include zswr_rckdvols_pbo.
include zswr_rckdvols_pai.
include zswr_rckdvols_form.
* INITIALIZATION
initialization.
perform layout_build.
* AT SELECTION-SCREEN
<b>at selection-screen output.
if sy-tcode = 'ZCREATE'
    and p_switch = space.
    submit zswr_rckdvols
           with p_switch = 'X'
                 and return.
    leave program.
endif.</b>
at selection-screen on s_locid.
clear lv_plnt.
select single werk from oijrra
into lv_plnt
where locid in s_locid and rpart = gc_rpart.
perform memory_id_build.
* START-OF-SELECTION
start-of-selection .
perform fieldcatalog.
perform fill_internal_table.
perform build_outtab.
end-of-selection.
check: not gi_zswt_rckdvols[] is initial.
set screen 100. "Main Screen
Regards,
Rich Heilman

Variants on tabbed selection screen for ALV reports

Scenario: We use a tabbed selection screen for an ALV report. We create a variant, make a selection field on the second tab mandatory & save it without a value. When we run the report with the saved variant it does not check that the required field on the second tab is populated before it executes.
Question: How can I code such a check?
Edited by: Alridge Tom on Jul 4, 2008 3:43 PM

Hi,
try inserting this code apropietly in you program. (1 parameter + Initialization + At-selection-screen + 2 forms)
START HERE
PARAMETERS: pa_vari TYPE disvariant-variant.
INITIALIZATION.
g_repid = sy-repid.
CLEAR e_variant.
e_variant-report   = sy-cprog.
e_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save     = 'A'
    CHANGING
      cs_variant = e_variant
    EXCEPTIONS
      not_found = 2.
IF sy-subrc = 0.
    pa_vari = e_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
*&      Form ALV_VARIANT_F4
FORM alv_variant_f4 CHANGING pa_vari.
DATA: l_exit(1) TYPE c.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant       = e_variant
      i_tabname_header = 'ANYTHING'
      i_save           = 'A'
    IMPORTING
      e_exit           = l_exit
      es_variant       = e_variant
    EXCEPTIONS
      not_found        = 2.
IF sy-subrc = 2.
    MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    IF l_exit = space.
      pa_vari = e_variant-variant.
    ENDIF.
ENDIF.
ENDFORM.                               " ALV_VARIANT_F4
END
Hope iy helps!
Alfonso

How to can we do selection-screen modification for LDB?

Hi All,
I have custom field in my selection-screen of LDB PNP.
Can you people please let me know how can I put the selection-screen modificaiton For ex:
i have created
parameters a as checbox.
select-options: p_btrtl for p0001-btrtl no-intervals.
now If the check box is selected then p_btrtl we can enter values or esle If check box is not selected then p_btrtl will be grayed out, ( I.e. SCREEN-INPUT = 0)
This is simple from ABAP without LDB. But with LDB can we achieve?????????????
Satish
Edited by: Satish Vasireddy on Jun 23, 2010 4:05 PM

you can use the following logic for the additional selection validation. I have done by using PNP LDB. Ex : I have done for one of the field in IT0377.
SELECT-OPTIONS: s_bplan FOR p0377-bplan.
*&      Form check_selection_0377
This subroutine is used to check the selection screen
FORM check_selection_0377.
LOOP AT p0377 WHERE pltyp IN s_bplan
                 AND levl1 IN s_lti
                 AND   begda LE pn-endda
                 AND   endda GE pn-begda.
    CALL FUNCTION 'HR_CHECK_AUTHORITY_INFTY'
      EXPORTING
        tclas            = 'A'
        pernr            = pernr-pernr
        infty            = p0377-infty
        subty            = p0377-subty
        begda            = pn-begda
        endda            = pn-endda
        level            = 'R'
      EXCEPTIONS
        no_authorization = 1
        internal_error   = 2
        OTHERS           = 3.
    IF NOT sy-subrc IS INITIAL.
      DELETE p0377.
    ENDIF.
ENDLOOP.
selection not found and no value selected
IF sy-subrc NE 0.
    READ TABLE s_bplan.
    IF sy-subrc EQ 0.
      REJECT.
    ENDIF.
    READ TABLE s_lti.
    IF sy-subrc EQ 0.
      REJECT.
    ENDIF.
ENDIF.
ENDFORM.                    " check_selection_0377
Regards,
Preetham

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

How to save the variant and select it for displaying output

For      ALV variant use the FM_REUSE_ALV_VARIANT_F4 and REUSE_ALV_VARIANT_DEFAULT_GET to allow the user to save the variant and select it for displaying output.If   any of the data (Z fields in VBAP) is blank,the cell in the column must be highlighted in red.

Hi,
   Refer thsi code
DATA : wa_variant TYPE disvariant,       "Work area for variant
       wa_variant1 TYPE disvariant,       "Work area for variant
*&      Form sub_get_default_variant                                  *
This form will initialize the variant                               *
FORM sub_get_default_variant .
*--Clear
CLEAR wa_variant.
*--Pass the report name
v_repid = sy-repid.                     "Report ID
wa_variant-report = v_repid.
*--Call the function module to get the default variant
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
    EXPORTING
      i_save        = c_save
    CHANGING
      cs_variant    = wa_variant1
    EXCEPTIONS
      wrong_input   = 1
      not_found     = 2
      program_error = 3
      OTHERS        = 4.
*--Check Subrc
IF sy-subrc = 0.
    p_varnt = wa_variant-variant.
ENDIF.
ENDFORM.                                  "sub_get_default_variant
Regards,
Prashant

Change Layout in Selection Screen for OO ALV-Grid

Hello everyone,
I got a problem regarding layouts for objectoriented ALV Grid. I want to make it possible that user can take the layout for ALV he wants to on the selection screen. So far thats no problem and it works. But there are some little problems which I do not know how to fix them. But first the facts:
(1) I got my parameter for layout
PARAMETER: p_vari TYPE disvariant-variant.
(2) I fill my global layout structure in initialization
INITIALIZATION.
* Variante vorbelegen
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ENDIF.
(3) I got my handling for F4-value help on variant parameter
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
   CALL FUNCTION 'LVC_VARIANT_F4'
     EXPORTING
       is_variant    = gs_variant
       i_save        = 'A'
     IMPORTING
       es_variant    = gs_variant
     EXCEPTIONS
       not_found     = 1
       program_error = 2
       OTHERS        = 3.
   IF sy-subrc <> 0.
     MESSAGE text-m01 TYPE 'S'.
   ELSE.
     p_vari = gs_variant-variant.
   ENDIF.
(4) I give back my parameters content into the variant structure at start of selection
START-OF-SELECTION.
   gs_variant-username = sy-uname.
   gs_variant-report   = sy-repid.
   gs_variant-variant = p_vari.
This works all fine but I got some problems when using default variants/layouts. For example I got a default variant only for me. When starting the selection screen it works fine that the default layout was written. It is displayed automatically in the variant parameter. But I want that if i I empty the content (blank it out) from my variant parameter, that report should start with "normal" layout how it was written in the report and NOT with default layout.
When I clear the gs_variant it works like I want it, but then the alv layout button looks like (without functions for layout), because I do not have the reference to my report.
So what to do? :-)
Regards
Michael

Wow that was fast, works great, thanks :-)
I did not use this parameter in set table method but now I fill it dynamically.
Ok next problem, one step harder ;-)
Now I have one selection screen for one ALV-Grid, but four radio buttons which control with which data the ALV gets filled (four different fieldcats, data tables and so on). Each Grid got an own HANDLE so that the layouts can be separated in four categories.
Now I want that by changing the radio button the individual standard layout for the chosen alv grid is getting filled.
This works fine when using it in selection screen output.
AT SELECTION-SCREEN OUTPUT.
   CLEAR gs_variant.
* Layout-Handles individuell für Klausel-Radiobuttons setzen
   IF     p_py IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLPY'.
   ELSEIF p_rh IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLRH'.
   ELSEIF p_aj IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLAJ'.
   ELSEIF p_sr IS NOT INITIAL.
     gs_variant-username = sy-uname.
     gs_variant-report   = sy-repid.
     gs_variant-handle   = 'KLSR'.
   ENDIF.
* Layout holen
   CALL FUNCTION 'LVC_VARIANT_DEFAULT_GET'
     EXPORTING
       i_save        = 'A'
     CHANGING
       cs_variant    = gs_variant
     EXCEPTIONS
       wrong_input   = 1
       not_found     = 2
       program_error = 3
       OTHERS        = 4.
   IF sy-subrc = 0.
     p_vari = gs_variant-variant.
   ELSE.
     CLEAR p_vari.
   ENDIF.
But unfortunately selection screen output is getting passed by EACH changing in the selection screen. This means when I try to clear the default layout in my parameter field, it gets refilled automatically with default layout. If I do a condition around the filling (only if not initial) the default value filling does not work fine in every case, e.g. when clearing the parameters field and then change the radiobutton -> then it does not get filled automatically.

Define selection screen for ldb_process

Hi I'm using the call function ldb_process for KDF(lfa1, lfb1, bsik), the trouble is that the information its different than if i do it on a normal report defining the logical database kdf and selection screen 903.
I find that the difference is because the selection screen, this is because the default selection screen for the kdf database is 1000, and this selection has the "Open items at key date" selection with the current date.
The question is:
How can i define the selection screen 903 using the call function ldb_proces?
Thanks
Pablo Santos

Hi,
You cannot define screen version 903 using function LDB_PROCESS. Instead use table "SELECTIONS" of the function module .
Cheers.

How to create a new selection screen IN LOGICAL DATABASE PNPCE

how to create a new selection screen LDBS PNPCE

Hello Ankit,
Do you want to create a new selection screen in LDB PNPCE, or do you want to create a new selection screen in one of your reports using LDB PNPCE?
For later (which is more common), you can use HR Report Category.
Hope this helps.
Best Regards,
Biraju Rajyaguru

How can i declare a selection screen in a DP program with transaction code.

hi friends,
How can i declare a selection screen in a DP program with transaction code. What are the events and flow logic..

Search in SCN/Google for Module-pool programming basics.

Modify selection screen for Logical Database 'SDF'

Hi
I need to make a section of the standard selection screen for logical database 'SDF' invisible. I have tried the differet selection screen options of the report attributes, but none of the provided ones give me what I want.
How can I find the name of the screen group for the "Line Item Selection" block of the selection screen so that I can make it invisible when the selection screen is displayed?
Thanks,
Thomas

I tried to do this:
Loop at screen.
         if   screen-group4 = '026'
           or screen-group4 = '027'
           or screen-group4 = '028'.
             screen-invisible = 1.
             modify screen.
         endif.
endloop.
This removed the selection text for these fields, but the Line Item Selection block is still visible, and the actual input fields are also visible. They now look like password input fields with all ***** in them.
What am I doing wrong?
Thanks for your help!
Thomas

Adding layout variant to selection screen

Hi all,
         Currently I am working on report program, where I have to allow user to select his own output pattern. i.e layout variant is to be added to selection screen. The report uses object oriented ALV for display purpose. [set_table_for_first_display]
I made following steps,
1.     Declared one parameter of type disvariant.
2.     At selection-screen on value-request I called function REUSE_ALV_VARIANT_F4.
3.     Passed internal table to method set_table_for_first_display.
Now I am able to create save new variant, on selection screen I can select the variant that I have created, but output shows the all the fields though
Only few are selected. Please tell me any modification so as to reflect the changes in output.
I am searching for a function which maintains fieldcat according to user defined variant.
Regards,
Nilesh kulkarni.

U have to use REUSE_ALV_VARIANT_EXISTENCE inorder to use the layout u have selected
After ur code of REUSE_ALV_VARIANT_F4.
try this way
AT SELECTION-SCREEN.
   PERFORM PAI_OF_SELECTION_SCREEN.
G_REPID = SY-REPID.
G_SAVE = 'A'.
FORM PAI_OF_SELECTION_SCREEN .
IF NOT P_LAYOUT IS INITIAL.
    MOVE G_VARIANT TO GX_VARIANT.
    MOVE P_LAYOUT TO GX_VARIANT-VARIANT.
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
         EXPORTING
              I_SAVE     = G_SAVE
         CHANGING
              CS_VARIANT = GX_VARIANT.
    G_VARIANT = GX_VARIANT.
ELSE.
    PERFORM VARIANT_INIT.
ENDIF.
ENDFORM.                    " PAI_OF_SELECTION_SCREEN
FORM variant_init .
CLEAR G_VARIANT.
G_VARIANT-REPORT = G_REPID.
ENDFORM.                    " variant_init
Then when u call ALV for display, pass ur display variant, in this case = g_variant
Reward if useful
Cheers
~Arun
Message was edited by:
        Arun Shekhar

How to protect variant in selection screen for particular user.

Similar Messages

Maybe you are looking for