How to provide checkbox for multiple selection in OBIEE

Thanks in Advance
Regards
Frnds

How's the "GUI" different from a prompt rendered in a dashboard?
Try being more specific and especially...use relevant terms. Are you talking about a dashbaord page? Do you want it inside a request etc. etc.
Edited by: Christian Berg on Feb 10, 2009 11:50 AM

Similar Messages

How to use DirectCast for multiple selected rows?

Hi<o:p></o:p>
Me.SecondBindingSource.DataSource = DirectCast(parentForm.FirstBindingSource.Current, DataRowView) works perfect for single items but how do I do it if I've selected multiple rows on datagridOne and want to pass only the selected rows to datagridTwo using DirectCast?
Me.SecondBindingSource.DataSource = DirectCast(main.FirstBindingSource.Current, DataRowCollection) does not work??<o:p></o:p>

You have to put the rows into a datatable. It is usually best if your original source is a datatable. The filter the original datatable. The selected rows of the datagrid are the same row numbers in the source datatable.
jdweng

How to set billing doc parameter for multiple selection ?????

Hi all,
Output for Billing
VF31, SD70AV3A
i would like to add Multiple selection to the Billing Document parameter. multiple Currently, it would only give data for one of the documents in the selection.
According to me the billing parameter can be changed for multiple selection, need your suggestion for how to proceed with this..
Thx in adv
Megha

VF31 <b>does</b> have multiple selection option for Billing document, at least in my world (4.7).

How to call adobeform multiple times for multiple selection.

Hello Experts,
Good morning.
I am new to ABAP,
I am working on one program which is used for printing a bank voucher for that i have to select multiple document number (BELNR), it is running fine with selecting a single document but for multiple selection i have to call adobeform multiple times.
Can anyone give me the solution how to do this.
Any suggestion will be appreciated.
Regards,
Dipen Pandya.

Yes i have done the same way.
Please have a look at my code.
REPORT zfi_print_bank_voucher.
TABLES: bkpf,
         bseg,
         skat.
TYPES : BEGIN OF lv_main,
        belnr TYPE bkpf-belnr,
        xblnr TYPE bkpf-xblnr,
        ebeln TYPE bseg-ebeln,
        bankn TYPE lfbk-bankn,
        budat TYPE bkpf-budat,
        bldat TYPE bkpf-bldat,
        bedat TYPE ekko-bedat,
        bankl TYPE lfbk-bankl,
        lifnr TYPE lifnr,
        END OF lv_main.
TYPES: BEGIN OF st_bseg,
         ebeln TYPE bseg-ebeln,
         bukrs TYPE bseg-bukrs,
         buzei TYPE bseg-buzei,
         hkont TYPE bseg-hkont,
         bschl TYPE bseg-bschl,
         saknr TYPE skat-saknr,
         txt20 TYPE skat-txt20,
         kostl TYPE bseg-kostl,
         mwsts TYPE bseg-mwsts,
         dmbtr TYPE bseg-dmbtr,
         belnr TYPE bseg-belnr,
       END OF st_bseg.
TYPES: BEGIN OF i_desc,
         spras TYPE skat-spras,
         saknr TYPE skat-saknr,
         txt20 TYPE skat-txt20,
   END OF i_desc.
TYPES: BEGIN OF st_bkpf,
        belnr TYPE bkpf-belnr,
        xblnr TYPE bkpf-xblnr,
        budat TYPE bkpf-budat,
        bldat TYPE bkpf-bldat,
   END OF st_bkpf.
TYPES: BEGIN OF st_lfbk,
         bankn TYPE lfbk-bankn,
         bankl TYPE lfbk-bankl,
   END OF st_lfbk.
TYPES: BEGIN OF st_ekko,
         ebeln TYPE ekko-ebeln,
         bedat TYPE ekko-bedat,
   END OF st_ekko.
DATA: it_bseg TYPE STANDARD TABLE OF st_bseg,
       wa_bseg TYPE st_bseg.
DATA: it_bkpf TYPE STANDARD TABLE OF st_bkpf,
       wa_bkpf TYPE st_bkpf.
DATA: it_desc TYPE STANDARD TABLE OF i_desc,
       wa_desc TYPE i_desc.
DATA: it_lfbk TYPE STANDARD TABLE OF st_lfbk,
       wa_lfbk TYPE st_lfbk.
DATA: it_ekko TYPE STANDARD TABLE OF st_ekko,
       wa_ekko TYPE st_ekko.
DATA: fname TYPE funcname,
       ls_outputparams TYPE sfpoutputparams,
       logo_bin TYPE xstring.
DATA: ls_result TYPE sfpjoboutput.
DATA: it_main TYPE STANDARD TABLE OF lv_main,
       wa_main TYPE lv_main.
DATA: i_bseg TYPE ztt_bseg WITH HEADER LINE.
DATA: ok_code TYPE sy-ucomm.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE t001.
SELECT-OPTIONS bukrs FOR bkpf-bukrs OBLIGATORY DEFAULT '1000' NO-EXTENSION NO INTERVALS.
SELECT-OPTIONS belnr FOR bkpf-belnr OBLIGATORY.
PARAMETERS: year LIKE bkpf-gjahr DEFAULT sy-datum+0(4) OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
INITIALIZATION.
   t001 = 'Enter Specific Details'.
START-OF-SELECTION.
   PERFORM feeding_data.
   PERFORM print_form.
*&      Form print_form
*       text
FORM print_form.
   CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
     EXPORTING
       i_name     = 'ZFI_BANK_VOUCHER_FORM'
     IMPORTING
       e_funcname = fname.
   ls_outputparams-bumode = 'M'.
   CALL FUNCTION 'FP_JOB_OPEN'
     CHANGING
       ie_outputparams = ls_outputparams
     EXCEPTIONS
       cancel          = 1
       usage_error     = 2
       system_error    = 3
       internal_error = 4
       OTHERS          = 5.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
   LOOP AT it_main INTO wa_main.
*at new belnr.
     PERFORM controll_internal.
     CALL FUNCTION fname "'/1BCDWB/SM00000237'
       EXPORTING
*   /1BCDWB/DOCPARAMS        =
         belnr_d                  = wa_main-belnr    "bkpf
         lifnr                    = wa_main-lifnr
         xblnr                    = wa_main-xblnr      "bkpf
         ebeln                    = wa_main-ebeln      "bseg
         bankn                    = wa_main-bankn      "lfbk
         budat                    = wa_main-budat      "bkpf
         bldat                    = wa_main-bldat      "bkpf
         podat                    = wa_main-bedat      "ekko
         bankl                    = wa_main-bankl      "lfbk
         itab_bseg                = i_bseg[]
* IMPORTING
*   /1BCDWB/FORMOUTPUT       =
      EXCEPTIONS
        usage_error              = 1
        system_error             = 2
        internal_error           = 3
        OTHERS                   = 4
     IF sy-subrc <> 0.
* Implement suitable error handling here
     ENDIF.
   ENDLOOP.
   CALL FUNCTION 'FP_JOB_CLOSE'
     IMPORTING
       e_result       = ls_result
     EXCEPTIONS
       usage_error    = 1
       system_error   = 2
       internal_error = 3
       OTHERS         = 4.
   IF sy-subrc <> 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
   ENDIF.
ENDFORM.                    " PRINT_FORM
*&      Form FEEDING_DATA
*       text
* --> p1        text
* <-- p2        text
FORM feeding_data .
   SELECT ebeln
           bukrs
           buzei
           hkont
           bschl
           kostl
           mwsts
           dmbtr
           belnr
      FROM bseg INTO CORRESPONDING FIELDS OF TABLE it_bseg
                WHERE bukrs IN bukrs
                    AND belnr IN belnr.
   SELECT saknr txt20 FROM skat
     INTO CORRESPONDING FIELDS OF TABLE it_desc
       FOR ALL ENTRIES IN it_bseg
             WHERE saknr = it_bseg-hkont AND
                   spras = sy-langu.
   IF it_desc IS NOT INITIAL.
     LOOP AT it_bseg INTO wa_bseg.
       READ TABLE it_desc INTO wa_desc WITH KEY saknr = wa_bseg-hkont.
       IF sy-subrc = '0'.
         wa_bseg-txt20 = wa_desc-txt20.
         MODIFY it_bseg FROM wa_bseg.
       ENDIF.
     ENDLOOP.
   ENDIF.
   SELECT * FROM bseg
           INTO CORRESPONDING FIELDS OF TABLE it_main
           WHERE belnr IN belnr AND
                 shkzg = 'S'.
   LOOP AT it_main INTO wa_main.
     SELECT SINGLE lifnr FROM bseg
       INTO wa_main-lifnr
       WHERE belnr = belnr-low.
     SELECT SINGLE bankl bankn FROM lfbk
            INTO (wa_main-bankl, wa_main-bankn)
            WHERE bankl = wa_main-lifnr.
    SELECT SINGLE budat bldat FROM bkpf
      INTO (wa_main-budat, wa_main-bldat)
      WHERE belnr = belnr-low.
     SELECT SINGLE bedat FROM ekko
            INTO wa_main-bedat
            WHERE ebeln = wa_main-ebeln.
     MODIFY it_main FROM wa_main.
     CLEAR wa_main.
   ENDLOOP.
ENDFORM.                    " FEEDING_DATA
*&      Form CONTROLL_INTERNAL
*       text
* --> p1        text
* <-- p2        text
FORM controll_internal .
   LOOP AT it_bseg INTO wa_bseg.
* lw_bseg = wa_bseg.
     AT NEW belnr.
       i_bseg-buzei = wa_bseg-buzei.
       i_bseg-hkont = wa_bseg-hkont.
       i_bseg-bschl = wa_bseg-bschl.
       i_bseg-txt20 = wa_bseg-txt20.
       i_bseg-kostl = wa_bseg-kostl.
       i_bseg-mwsts = wa_bseg-mwsts.
       i_bseg-dmbtr = wa_bseg-dmbtr.
       APPEND i_bseg.
      ENDAT.
   ENDLOOP.
ENDFORM.                    " CONTROLL_INTERNAL

How to apply List box for multiple selection of rows in ALV report ?

Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subash

hi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
      wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
ENDMODULE.                    "pai INPUT
*&      Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'T517A'
    CHANGING
      ct_fieldcat      = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
   WHEN 'SLART'.
*is the first list box
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
        ls_fcat-drdn_hndl = '2'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
         EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      is_layout       = gs_layout
    CHANGING
      it_fieldcatalog = gt_fieldcat
      it_outtab       = gt_outtab.ENDFORM.                               "ALV_OUTPUT
*&      Form dropdown_table
      text
--> p1        text
<-- p2        text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.ENDFORM.                               " dropdown_table
*&      Form build_layout
      text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM.                    " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM

How to provide hyperlink for a particular field in ALV

Hi,
How to provide hyperlink for a particular field in alv report.
Regards,
Ramu.

Yes you can do that. using the fieldcatalog there is an option for that. give HOT_SPOT = 'X'. for the column you want.
wa_field-hotspot = 'X'.
REPORT ztest_alv.
TYPE-POOLS:slis.
DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
     wa_field LIKE LINE OF it_fieldcat.
DATA: BEGIN OF it_likp OCCURS 0,
       vbeln TYPE likp-vbeln,
      END OF it_likp.
DATA: layout TYPE slis_layout_alv.
wa_field-fieldname = 'VBELN'.
wa_field-tabname = 'IT_LIKP'.
wa_field-hotspot = 'X'.
wa_field-outputlen = 10.
wa_field-no_zero = 'X'.
wa_field-seltext_l = 'Sales'.
APPEND wa_field TO it_fieldcat.
SELECT vbeln FROM likp
UP TO 10 ROWS
INTO TABLE it_likp.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program      = sy-repid
    is_layout               = layout
    i_callback_user_command = 'USER_COMMAND'
    it_fieldcat             = it_fieldcat
TABLES
    t_outtab                = it_likp
EXCEPTIONS
    program_error           = 1.
*&      Form user_Command
*       text
*      -->UCOMM      text
*      -->SELFIELD   text
FORM user_command USING ucomm TYPE sy-ucomm
                    selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      SET PARAMETER ID 'VL' FIELD selfield-value.
      CALL TRANSACTION 'VL02N' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_Command

One search help for multiple select-options in webdynpro abap

Hi,
I need a way to use one search help for multiple select-options fields. My scenario is :
I have a table for keeping different organizational units' values of different systems. I have pasted some sample data from this table at the end of this mail. On the screen I want to have 1 select-options filed for werks, and 1 select-options filed for vkorg. (In fact I will have more org. unit fields...) In the beginning of my application the user will select sid.
If the user selects ADS as SID, when he opens search-help for the first org. unit (werks), he will see the records with SID: ADS, VARBL = $WERKS, LANGU = SY-LANGU.
If the user selects AGT as SID, when he opens search-help for the second org. unit (vkorg), he will see the records with SID: AGT, VARBL = $VKORG, LANGU = SY-LANGU.
I have created a search-help taking SIDD, VARBL and LANGU as import parameters; used field mapping and bound this search help to my table. I have created 2 context nodes : org1 and org2 having attributes SID, VARBL, VALUE, LANGU .
I have assigned related SID, VARBL and Langu values to these attributes at runtime as I needed. That way, if I use input field and reference to the related context attributes org1-value and org2-value2 accordingly, search help works well as I want.
However, when I use select-options field , I can not bind the field to the context data. I can give reference only to ddic structure. Is there any way to reference to a context attribute? I searched for this in SDN, but could find nothing.
I think I won't be able to use this way. What do you say?
As I read from forums maybe using OVS help will be suitable for me. But I have to use one search-help for all select-options fields. Do you know how I can determine the active select-options field and pass its name (for instance "werks" ) as parameter to this OVS search help. (Also I'll pass SID and LANGU.)
MY TABLE (ZBYYT080) CONTENTS:
SID     VARBL     VALUE     LANGU     VTEXT
ADS     $WERKS     1     T     Werk 0001
ADS     $WERKS     11     T     OZYAS GIDA URETIM YERI
ADS     $WERKS     5501     T     BOYA GEBZE FABRİKASI
ADS     $WERKS     5502     T     BOYA CIGLI FABRİKASI
AGT     $WERKS     2301     T     KAMLI DAMIZLIK
AGT     $WERKS     9601     T     PANAR DENIZ URETIM YERI
ADS     $VKORG     22     T     AA KİMYASALLAR
ADS     $VKORG     8001     T     İINSAAT BOYALARI
AGT     $VKORG     6500     T     DAMk St.Org
AGT     $VKORG     5400     T     PANAR St.Org.
I wish I'm clear enough..
I will be gald if someone answers me as soon as possible...
Thanks İn advance..
MERAL

Hi,
Your ques is how to refer to a DDIC search help to refer to selection screen parameter ?
Am I right ?
If Yes, then in the interface IF_WD_SELECT_OPTIONS
method ADD_SELECTION_FIELD, ADD_PARAMETER_FIELD etc
have importing param like I_VALUE_HELP_TYPE and I_VALUE_HELP_ID, I_VALUE_HELP_MODE, I_VALUE_HELP_STRUCTURE
etc which may help you to link your create DDIC Search help to selection screen params.
this is just a clue from my side. I haven't tried it myself.
You can go to the where used list of this method and find some sample implementations which use these params.
Hope this helps.
Regards
Manas Dua

Routine for multiple selection in infopackage???

hello guys
I thought of creating one routine for Multiple selections aT Infopackage level....in Selections screen in infopackage,I found one option 'Use Conversion routine' with a check box and it is inactive.....Is it here I need to write my routine inorder to get multiple selection for a infoobject....or is it somehwhere else?How to activate thisoption?
Thanks,
Regards,
S

Hi,
Conversion routines are used in the BI system so that the characteristic values (key) of an InfoObject can be displayed or used in a different format to how they are stored in the database. They can also be stored in the database in a different format to how they are in their original form, and supposedly different values can be consolidated into one.
This will be there at info object level.
Eg : ALPHA: Fills purely numeric fields from the left with zeroes (0).
For multiple selections at info package , in data selection tab under type , u need to select 6 and write the code to select the value.When info package runs it takes the value from routine dynamically and extracts the data based on selection.
Eg: There is a field FISCAL PERIOD For data selection, if u write the code to select current fiscal period. then whenever info package runs it extracts the data for current fiscal period from data source to PSA.
Thanks,
Joseph.

How will i display the multiple select ids in the dashboard ?

I have a form where there is a multiple select. When the form is submit, the ids for the multiple select is stored in the database as concatenate. For example, multiple select : 3,9,5,1.
The ids of the multiple select is found in a table TABLE1 and the insertion is done in another table TABLE2.
Now I have to display them in a dashboard.
My question is how will i display the multiple select ids in the dashboard ?
I have to do an innerjoin with TABLE1 to retrieve the names of the multiple select ids. I don't know how to do it because the column name for multiple select in TABLE2 is of type text and the column id in TABLE1 is of type int.
Please help me solve this problem.
Thanks in advance

One general advice is, never store comma-delimited lists in the database. In fact, the reason is to avoid problems like the one you now face.
The major suggestion here is to re-design your database. Make sure each selected item (for example 3, 9, 5 or 1) is stored in its own row.
To solve the problem as it now stands, you could do something like
<cfquery>
select myItems
from table2
where id in (select id from table 1 where ...etc.)
</cfquery>
Then use ColdFusion's list functions to do what your dashboard requires you to do.

ABAP routine in the infopackage for Multiple Selection

Hi experts,
I want to include a abap routine in the infopackage for Multiple Selection so that I can fetch only the required Material Numbers when the InfoPackage is schedule. As I have the constraints that I have to select certain Material Numbers only, that are not in series - so I cannot select"BT' fuction. Tell me what ABAP Code will work in this scenario.
Kind regards,
Rajesh Giribuwa

Hi,
The Routine will have to use 'EQ' operator and Append each selections to the Structure.
ABAP Routine
InfoPackage definition for Bespoke SIS Structure
Infopackage routine !
Regards
Happy Tony

For multiple selection...

hi...
for multiple selection i am using Table UI element.. For that i will put any coding for search...
I have flighti 's in Table...Just i clk first three flight id's....and i will clk search..in next screen the three flight details only should come...for this in search button i will put any coding...
pls tell me somebody.... urgent
with regards,
Gobinath.R

Hi Gobinath,
First you have to change the selectionMode property of the table to multi.
Then you can use the following condition:
for(int i = 0;i<wdContext.nodeTable.size();i++){
if(wdContext.nodeTable.isSelected(i)){
Where nodeTable is the datasource of the table.
Try this out. Hope this will solve your problem.
thanks & regards
Manoj

How to create parameter with multiple selection in a query (SQ02) ?

Hi Exports
Do you know how to create parameter with multiple selection in a query (transaction SQ02)?
thanks.

Hi
i know how to create user parameter at SQ02,
the question is how to create multiple selection parameter?

ADF af:inputComboboxListOfValues for multiple selection

Hi,
Can inputComboboxListOfValues be customized for multiple selection just like SelectManyChoice so that the component can avail the search facility.
regards

Hi,
here's a solution
http://msoyer.blogspot.com/2010/01/custom-declarative-component-multi.html
Frank
Ps.: There is no out of the box equivalent

ExportFile for multiple selection

CS5.5 - Javascript, I would like to know the exportFile method for multiple selection, for example if i have selected 4 rectangles and want to export these four objects as single jpg without grouping it. Thanks in advance.

Hi,
If your recs are inside a group already a possible solution is to:
duplicate them - group - export - remove.
Assuming recs are selected:
var
          mDoc = app.activeDocument,
          mFile = File("~/Desktop/test1.jpg"),
          len = app.selection.length,
          tempGroup = [], mTarget;
while (len-->0) {
          tempGroup.push( app.selection[len].duplicate() );
mTarget = mDoc.groups.add( tempGroup );
mTarget.exportFile(ExportFormat.JPG, mFile);
mTarget.remove();
Assuming a group is selected and each rec child is a target:
var
    mDoc = app.activeDocument,
    mFile = File("~/Desktop/test2.jpg"),
    mTarget = mDoc.groups.add(app.selection[0].rectangles.everyItem().duplicate());
mTarget.exportFile(ExportFormat.JPG, mFile);
mTarget.remove();
Jarek

Ghost image for multiple selection in JTree while drag and drop.

I am unable to create a Ghost image for drag and drop with in the JTree for multiple selection, i got some examples but all are for single selection ,
Idea of creating buffered image is good , but unable to create it for multiple selection , tried a lot but got weird results.... can any body give me any clue about this , if got any example that will be fantastic.
Thanks & Regards
Sandeep Mandori

sandeep_mandori wrote:
I am unable to create a Ghost image for drag and drop with in the JTree for multiple selection, i got some examples but all are for single selection ,
Idea of creating buffered image is good , but unable to create it for multiple selection , tried a lot but got weird results.... can any body give me any clue about this , if got any example that will be fantastic.
Thanks & Regards
Sandeep MandoriTry this:
    private TreePath[] dragPath;
    private BufferedImage[] image;
    private void createDragImage(JTree tree) {
        if (dragPath != null) {
            try {
                image = new BufferedImage[dragPath.length];
                for (int i = 0; i < dragPath.length; i++) {
                    Rectangle pathBounds = tree.getPathBounds(dragPath);
TreeCellRenderer r = tree.getCellRenderer();
DefaultTreeModel m = (DefaultTreeModel)tree.getModel();
boolean nIsLeaf = m.isLeaf(dragPath[i].getLastPathComponent());
MutableTreeNode draggedNode = (MutableTreeNode) dragPath[i].getLastPathComponent();
JComponent lbl = (JComponent)r.getTreeCellRendererComponent(tree, draggedNode, false ,
tree.isExpanded(dragPath[i]),nIsLeaf, 0,false);
lbl.setBounds(pathBounds);
BufferedImage img = new BufferedImage(lbl.getWidth(), lbl.getHeight(),
BufferedImage.TYPE_INT_ARGB_PRE);
Graphics2D graphics = img.createGraphics();
graphics.setComposite(AlphaComposite.getInstance(AlphaComposite.SRC_OVER, 0.5f));
lbl.setOpaque(false);
lbl.paint(graphics);
graphics.dispose();
image[i] = img;
} catch (RuntimeException re) {}

How to provide checkbox for multiple selection in OBIEE

Similar Messages

Maybe you are looking for