How to publish a non scorm file to open in new window on LMS?

Hi, I've published an elearning module to our LMS, but I can't get it to open in a new window.
I've published some captivate courses before which all did open in a new window. The difference with this one is that all the others were scorm (had quizzes which this one doesn't.)
Is that the problem? I did try to publish the file as if it were a scorm file (tick 'enable reporting for this project') but then the LMS could not open the course.
The file is published like: elearn output: disabled, display score: no, enable access.: yes. Output options: export html
Any ideas?
Thanks a lot!

Hello and welcome,
Several factors will be responsible for the SWF output file. You use high resolution (ppi, 24-bit; sometimes I have better results with Optimized which cannot be set here but has to be done in the slides themselves), probably needed because of quality. You can reduce more by setting only those slides that need this high quality to High (or Optimized) and leave the others at Low but this also has to be done in the Slide Properties and then you'll have to check 'Retain Slide Quality Settings'. But what is the total resolution of your project: widthxheight? Because that is also one of the main factors! Next question: do you have audio? Audio clips add a lot more to the filesize than slides and/or graphics. If you have be sure to keep the lowest acceptible settings for the audio. Do you have video inserted? Again... adds to filesize.
Maybe this seems a stupid question, but I have so often seen files with slides that have an unneccessary long duration. Each second of a slide adds 30frames to your project...
Lilybiri

Similar Messages

When I open a new window (App etc) the windows already open disappear. How can I fix this ?, When I open a new window (App etc) the windows already open disappear. How can I fix this ?

When I open a new window (App etc) the windows already open disappear. How can I fix this ?

Back up all data.
Please triple-click anywhere in the line below on this page to select it:
defaults delete com.apple.dock single-app && killall Dock
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign ($) to appear below what you entered. You can then quit Terminal. Test.

How do I create a hyperlink that will open a new window, when saving a frame file as a pdf?

I have created a hyper link in Frame using the message URL command in the marker window. I have added the target="_blank" command after the http url within the marker. But when I then save the frame doc as a pdf and open that pdf from within a browser, when I click on the link in that pdf, it goes to the new link but it does not open in a new window or tab.
What am I doing wrong?
I should mention that I am using Frame 10.

Best solution that I can find to tell you is to get Schlomo Perets' FrameMaker-to-Acrobat TimeSavers 5.0. From the FrameUsers mailing list:
Schlomo Perets said:
In FrameMaker-to-Acrobat TimeSavers 5.0, the "new window" link control was extended to optionally display web-based links in a new browser window (Links/General tab, Cross-file links: Open PDF in a new window, Also apply to web links).
The function can apply to all web links (i.e. no need to modify anything in the FrameMaker file), or to individual links (in which case a special hypertext marker has to be used instead of the standard "message URL http://..." marker).
For additional info & sample files, see http://www.microtype.com/ImprovePDF10.html
HTH;
David

How to set linked FM hyperlink parameters to open in new window?

I have a URL hyperlink style that is being pulled over correctly from FM without even any mapping to a new character style. However, the link opens within the Help window, and I want it to open in a new window.
I'm aware that you can click double click the link to bring up the Hyperlink dialogue box, then choose the "Display In" radial button option of "New Window." to get it to work how I want.
However, that would require a manual intervention for every link, and even if I did it, I don't think it would retain the tweak once I update the linked files.
The original FM style is a character one, not sure if that might impact the solution here. It can't easily be modified to another style is why I mention it, it's a default style in thousands of pages of documentation.
I see that there are some default "Hyperlink Styles" in the "Styles and Formatting" Pod. I tried to edit them and reverse engineer to get some ideas for a solution, but no such luck. I can't get any of these to apply as a style either, nothing happens when I try. I think I'm missing some part of how these work.
If anyone could point me in the right direction here, it would be much appreciated.
Thanks in advance.

FredMcD,
I had already reset my Firefox which fixed my problem, but your reply was spot-on. I set the newtab value to about:blank, but the actual value that appears now in the address bar of the (blank) new page is "Search or enter address".
Another user told me to check for possibly suspicious programs that had been recently installed - but I found nothing. And nothing that mentioned Conduit
So I think all is well at this point. Thanks for your help.

Link to a file, but opened in new window

Hello,
I have a text, which I wanna turn into an active hyperlink to a video file. I go to HYPERLINK, check Enable as Hyperlink, check Make hyperlink active, link to a File, Input URL. Everything works, except the file opens in the same window as my website, so after watching video, a viewer has to return to my webpage. Is there any way, that I could make the file open in a new window?
Thanks

Try the method on this demo page: Opening Item in New Specially Sized Window.
OT

Excel-File not Open in new window

Hello,
i have created a new iView. This iView includes an excel-File. If I open this iView the excel-File will be opened in a new window.
Is it possible to integrate the excel-File into the iView, so that the excel-File will be in the iView when I open this?
Please help me
Regards,
Philipp

Hi Krishna,
i have set this property. But when I open the iView the application microsoft excel will be started and the excel-File is shown in this application. This excel application is not integrated in the iView.
Regards,
Philipp

How come everytime I click a link it opens a new window?

It also highlights the whole word when I only want to click a part of it and it doesn't let me scroll, does it have anything to do with my kitty walking on the keyboard?

try pressing shift 5 or 6 times to deactivate sticky keys. press cancel when the sticky keys dialog box comes up.

HTML Container - pdf-file opens a new window

I use the ITS Webservice PZ04.
There is included a html container who shows the pdf-file inside this area.
Now I have the effect, that this pdf-file will opena a new window, but not inside the html container!?
First action before I have had this effect was the MS question-alert 'How you will open this file' Open/Download/Cancel - you know. - it never done before -
What can I do to open my pdf-file inside the html container? It runs some times.
Thanks!

thank you for your answer, but it wasn't the solution.
I don't open the iView in a new window.
I open the iView (as IAC WebService via ITS) and the applacation generated a html container with pdf file!
And this pdf-file opens in a new window.
The Application runs up to now very good.
I think any value was changed and I don't know which.
It's possible the modification solved under MS or adobe!?
Solution: First Deinstallation and then Installation of Acrobate Reader.
Message was edited by: Ronald Kohn

How do I change firefox to open a new window when I start it several times instead of opening a new tab when I want to go to a different location?

I want to go to several different websites at the same time. I want to compare the information on each site. I do not want to open a tab, I want a whole new window. How do I change firefox so it will open a new window instead of opening a new tab and then requesting the site I want to go to?

In Windows XP I am able to right click a link and get an option to open it as a new Firefox window
*'''tear off tabs'''
You will probably note tabs can be dragged along the tab toolbar, they also tear off. You can click a tab and drag it off the browser onto the Windows Desktop where it will open as a new window, or drag it on to another open browser window.
An alternative is to click the tab and drag it down, again it will then open in a new Window.

How do I locate non picture files and location? I'm getting low memory and can't find word,PDF etc

how do I locate non picture files and location? I'm getting low memory and can't find word,PDF etc

iPads don't have a filesystem like a computer, Files of that nature must be associated with an App and reside inside that particular App's file space. So the way to find them is to open the App that opens that file type and look in its file or document list for them.

How can I print a prn file on HP6500; I have windows xp

How can I print a prn file on HP6500; I have windows xp

Perhaps some additional information would be helpful. Does the HP6500 refer to a printer? If yes, is the print driver and software installed on the computer that has XP? I assume "prn" refers to some picture file or not?
My crystal ball is in the shop and Teresa ( long Island median ) is out on a house call.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

I backed up my ipod during a windows backup. how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

i backed up my ipod during a windows backup. how do i find those ipod files(not itunes) in the windows backup files? i've tried searching and i can't find

so i plugged in my ipod and it asked if i wanted to backup the files before restoring it.
Do you mean iTunes asked if you wanted to backup files before restoring? If so the it is in the location I posted. You don't need to navigate to the backup. Once your restore your iPod it will ask if you want to restore from a backup and present you with the backups made before hand.
To restore information from a backup, use one of the following methods after connecting your iOS device to the computer with which you normally sync:
-Click the File menu and select Devices > Restore from Back up.
Or
-Open the iOS device's Summary tab. There are two ways to access this:
-Click the device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper right corner. The device button will then be visible.)
-From any view in iTunes, click the View menu and select Show Sidebar. Select your iOS device in iTunes under Devices.
-Click the Restore Backup button.

How to get the number of files currently open?

hi,
does any one know how to get the number of files currently open in windows OS?
e.g. lets say .txt files...
any comment will be really appreciated.
thanks

Assuming that you don't want to actually do this from within Java code (which would obviously require native code), here's a utility that will give you a list of which file handles are opened by which processes (on Windows):
http://www.sysinternals.com/ntw2k/freeware/handle.shtml
- K

How do i get my mp3 file to open in garageband?

how do i get my mp3 file to open in garageband?

PsychSlinger wrote:
how do i get import my mp3 file to open in garageband?
http://www.bulletsandbones.com/GB/GBFAQ.html#importaudio
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to make a remote panel file dialog open remote directory from any computer

Hello to everybody. I am using Labview 6.1 and I would like to know how to make a remote panel file dialog open remote directory from any computer (Not only from a specific computer. If I open the file with a specific computer, I have to conect the path of the remote machine, but if I don´t know which remote computer is going to run the aplication, how can I do it?)?

Hi!
first you have to know progammatically the name of the remote pc connected to your server: this is a problem!
I did not find a straigth way, LV 6.1 doesn't allow much progammatic control on the remote panel connection feature, but I'm confident that in the next LV version this will be improved!
The point is that the Remote Panel Connection Manager (from the Tools menu) has all the informations about the connection: client name, server vi and whatever.
This application is embedded in the \PROJECT\REMOTEPANEL.LLB and consists of a set of password protected vis.
So here's the trick: use VIServer to grab data from the rpcm Get Server Data.vi when the Remote Panel Connection Manager is in run mode. By this you get all the informations (not only client name)o
f the remote panel connection. See my example.
By the way use client machine name to build the file dialog function input path.
If anybody has an alternative method it would be more than appreciated to share it.
Good luck,
Alberto Locatelli
Attachments:
get_remote_machine_data.vi ‏151 KB

How to publish a non scorm file to open in new window on LMS?

Similar Messages

Maybe you are looking for