How to publish multiple folders at once?

Hi
I've created a publish service (jf zenfolio) under which using the the jf plugin publish I created varios folders, under which I've dropped different photos to publish.
Now... is there anyway I can tell the publish service to publish / republish everything in one click (instead of having to click on each folder to see if there's anything outstanding?

Select them , then Publish using the big button at the bottom of the left hand panel.

Similar Messages

  • How to Search Email in Multiple Folders at Once?

    Hi,
    I know how to search email in one folder, but how to search email in multiple folders at once? The only way I can think of is to go to each folder and issue a search on each folder. But if there are 10 folders, I will have to run search function 10 times. I tried to just use the folder I got from getDefaultFolder ( ) to do the search and think that it maybe the root of all folders, but it doesn't work. I have to getFolder (each_folder) and search 10 times. Does anyone know how?
    Thanks.

    813270 wrote:
    I just want to do a global search in all folders in the most efficient manner.Iterating or recursing over the folders is not "inefficient". It's the only way to search them all. And if the API provided a method to do that "all at once," that method would still have to be iterating or recursing anyway. It doesn't matter if it's your method or theirs that makes the multiple calls.
    There is a major difference between issuing one search command as a global search and 10 search commands to all 10 folders because of all these round trip traffics.And you know this because you've profiled and measured? Or you're just assuming.
    Now, if you're talking about the overhead of establishing 10 network connections vs. 1, then, yes, potentially it could make a difference. But that will most likely be dwarfed by the act of searching anyway.
    When there's an obvious solution in front of you, don't just go assuming it's "inefficient."

  • How to open multiple folders and read file?

    Hello,
    I try to use this bridge script. The script work very well for me but some times I have multiple folders.
    Now script work that:
    1. Read file in folder
    2. Save text file and show me popup with full quadrature
    http://forums.adobe.com/message/3996179?tstart=56
    1. Open folder
    2. Read file
    3. Close folder
    4. Read next folder
    5. Read file
    6. Close folder
    7. ....
    8. Save text file with all folders and show me popup with full quadrature
    Please help!
    Best regards.

    Lightwave wrote:
    I don't think you guys are hearing my question. I can see how to restore a single file or folder.
    I want to restore ALL the changed or deleted files and folders since my last backup (but not the entire disk, that would be unnecessary)
    Were all (or most) of the items in, say, your Documents folder, or your Music folder? If so, you can restore the whole folder via TM. That will put all sub-folders and files back exactly the way they were at the time of the backup. You just have to be careful to pick the right backup (date & time).
    Or, if they were scattered through your Home Folder, you can restore that entire folder in the same way.
    If you've made changes subsequent to that backup, however, they will be lost in the process. What you can do in that case is, restore to a different location, then compare the two folders, and drag & drop what you want. (To restore to a different location, select the folder in TM, then click the "gear" icon in the TM Finder window, and select +Restore <item selected> to ...+ and you'll be prompted for a restore location.)

  • How to publish multiple bit rate(MBR) live video?

    I've searched quite a few threads:
    http://www.developsigner.com/blog/2009/05/28/multi-bitrate-live-streaming-with-fmle-adobe- flash-media-live-encoder
    http://forums.adobe.com/thread/27371
    dynamicStream.addStream("livestream1",200);
    dynamicStream.addStream("livestream2",400);
    dynamicStream.addStream("livestream2",600);
    vid.play2(dynamicStream);
    But all of them are talking about playing multiple bit rate live video,
    my question is how I can publish multiple bit rate live videos in the first place?

    Thanks for your reply!
    But I need this to be done for each web user,
    so I can't require them to use FMLE themselves...

  • Import images from multiple folders at once?

    I know that Lightroom handles this as expected, but I cannot work out how to get Aperture to import everything within a folder including all of it's subfolders. For example, my photos are organised by Lightroom in folders per day, eg. 2006-10-12. It's getting tedious having to go through every single folder to import, but if I try selecting multiple folders, or the folder that contains these then none of the photos appear. What is the solution?

    Try File->Import->Folders as Projects... and in the Pop-up menu you can choose Import Folders as: Projects and Albums or Folders and Projects from the drop down. You can also choose the sub folder structure. You should be able to choose multiple folders and have all the folders and sub folders organized the way you want. Give it a test try before committing a large number.
    Matt

  • How to publish multiple calendars into .mac?

    There doesn't seem to be an option to publish multiple calendars to .mac. Is ther ea way that I can have all my calendars in one ical (.mac) view? I don't want to have multiple ical pages online.
    thanks

    There is no way to maintain separate source calendars on a Macintosh desktop or portable machine and publish a single, unified calendar using .Mac or a WebDAV server. It simply does not work that way.

  • How to download multiple songs at once on iPhone?

    I have many songs on my iphone that need to be downloaded from cloud (I use iTunes Match) to my device.  Is there a way to do so automatically and/or download multiple songs at once without downloading them one at a time?

    When you are viewing an Album, Artist or Playlist there is a "download all" button a the top of the list. Just tap it.

  • How to Search Multiple Folders?

    I am using a new machine with 10.7.2 Lion and I'm unable to do something I used to do on 10.4.11 Tiger, that is, search multiple folders simultaneously in Finder. To be clear, in a Finerd window, I was able to hit command-f and the current folder name would appear along with a button that said "Others." Clicking that would allow me to select any number of additional folders to include in my search. There isn't an "Others" button in Lion! What happened? Did the Lion developers get Lost?

    Greg,
    There's one way of doing this that's even easier than before.
    Use a Spotlight Search, one of the best OSX features ever. Simply press CMD-space, and you'll get a small window. Type in your search criteria, and Spotlight will automatially list all of the hits on your computer - without even pressing enter.
    If you're searching, say, using Safari, CMD-F will let you search for all the hits on the site you're on, and highlight them. Press Enter to cycle through the hits, if you have any.
    Otherwise, use Spotlight for your system search needs.

  • How to delete multiple email at once?

    Hi,
    I'm on the move a lot and go between my PC and my iPhone but sometimes I get hundreds of emails on my iPhone that I have already viewed on my PC.
    Is there a way to do a "Select all" to delete multiple email at once instead of using the edit feature?

    Is there a way to do a "Select all" to delete multiple email at once instead of using the edit feature?
    No. You'll have to click edit then put a check next to each email you want to delete, then hit delete. Once in trash, you can delete all.

  • How do you close multiple folders at once in IPhoto?

    What is the keyboard command?

    The same key combination also opens all event folders in the Photo mode.

  • How to Publish Multiple Websites Using Domain Masking

    Let's say I have a mobileme acct called applesoranges, but then I decided not to use this name for my website. Using iweb, I have created a different website called blueberry.com, and was able to figure out how to set up my personal domain and then mask appleoranges so that only blueberry.co, appears.
    I now want to add another website called strawberry.com. With one mobileme acct (applesoranges), is it possible to host 2 separate websites, each of which is masking the original mobileme acct? How does one set up 2 separate websites using iweb (each masking the original acct name)?
    Many thanks!

    For every MobileMe account you can only use the personal domain name option and CNAME only once. You enter your first domain name into your MMe account and then go and set up CNAME forwarding at your domain registrar to forward to web.me.com. For any other sites that you create, you need to go to web forwarding. You set-up the other domain names by using masked web forwarding and point them to web.me.com/username/sitename and by masking these will just show your domain name address and not your MobileMe/iWeb url.
    Make sure that you separate out your sites, as it will be easier. You can either duplicate the domain.sites files and have one site per a domain file or use a program called iWebSites to help you manage multiple sites.
    You also have the option of not using MMe and you can publish to a folder instead and upload directly to each domain hosting space. This gets away from the problem of how to forward sites to iWeb/MMe.

  • How finder shares multiple images at once and how can I use this in my app?

    You can share multiple images (or other documents) at once in finder. It's probably possible to make an app in Xcode that does exactly the same thing as well, but I don't know how. I really want to because I'm a bit curios. I would love if there are some code examples on the web so I can check it out. Can you help me?

    Matic Conradi wrote:
    .... I would love if there are some code examples on the web so I can check it out. Can you help me?
    Is your Google broken?

  • SNC5.1- How to Publish multiple line items in SNC Web UI (Supplier view)

    Hi Experts,
    I am working in SAP SNC Supplier Collaboration project. I have a scenario where i am trying to "Publish PO" for multiple line items in Web UI. I am able to confirm each PO line item and Save PO. But if i try to publish one line item at a time, then the system publishes the 1st line item and it does not allow me to publish the remaining PO line items.
    All i can do is, Confirm and Save all line items, and then "publish" it at the end. In this way,i can view all the confirmed line items (POA) in SNC. But how do I Confirm/Save/Publish each PO line item?
    Appreciate your help.
    Regards,
    dmohite

    Hi dmohite,
    As the POC standard process Supplier should give confirmation for all PO items after confirmation of all items it should allow to Published the PO at Header level.
    If supplier does not give confirmation for all items it should not allowed to Published the PO at Header level but you are able Published the PO at header level without confirmation of all PO items.
    You can implement note no: 1320445 (manual implementation is required).
    After implementation of this note without confirmation of all PO items it won't allow to publish the PO at header level.
    Please let me know for any clarification.
    Regards,
    Nikhil

  • How to unrar multiple folders?

    Maybe a little off-topic, but I use Snow Leopard. I have several folders with rar files, how can I unrar them all at once?

    Greg,
    There's one way of doing this that's even easier than before.
    Use a Spotlight Search, one of the best OSX features ever. Simply press CMD-space, and you'll get a small window. Type in your search criteria, and Spotlight will automatially list all of the hits on your computer - without even pressing enter.
    If you're searching, say, using Safari, CMD-F will let you search for all the hits on the site you're on, and highlight them. Press Enter to cycle through the hits, if you have any.
    Otherwise, use Spotlight for your system search needs.

  • How to delete multiple folders in organizer 12

    I have several duplicates of photos that I somehow created. I need to delete lots of duplicates. I see how to do it one folder at a time. However I have hundereds ! There must be a way to select more than one folder at a time for deletion. Anyone know how or if it can (or cannot) be done ?

    As you have probably seen, deleting a whole folder or many files in one batch is a long process. So, it makes sense to select the max amount of files to be deleted and run the deletion when you are not busy with the Organizer. It's reasonably quick to select all the files of a given folder and assign a 'to be deleted' keyword, so if you can assign that keyword to the contents of many folders, you'll be able to select by the keyword and let the deletion be processed while you are away.
    Note that deleting from catalog only or also from the drive are about as long.
    Another way if you want to physically delete from drive, would be to do it outside of the organizer.
    - Be sure you don't have missing files (not connected ones)
    - delete from the drive
    - Run the 'reconnect process' and use the menu to select all and delete all from catalog.
    Warning : with big catalogs (10 000 items or more), deleting many items will take a very long time and possibly abort without deleting anything.
    See:
    http://feedback.photoshop.com/photoshop_family/topics/elements_organizer_unable_to_delete_ a_big_number_of_files
    Both ways described above take the same time and have the above limitation.
    As usual, when deleting many items, doing a full backup before is highly recommended .

Maybe you are looking for