How to publish the private folder content to public folder?

Dear Experts,
I am a biginer in SAP DMS. We are using EDMS as the front end for the DMS.
When I log on to EDMS for the first time, it creates a private folder. I have created so many folders and created some documents as well.
Now my question is, how can I make some of those documents to be available at Public folder to view by all the users?
When I use the export folder option on a particular folder (by right click options for that folder), I am not able to do it. System is prompting to choose the location, but not exporting to the public folder.
Can some one please help me out in solving this problem??
Thanks and Regards,
Praveen

HI Christoph,
Thanks for your reply.
I have tried the copy paste option too. But I could not get any folder pasted into my public folder.
I have also tried with the paste as link option, which is working fine. But why is the copy paste option not working?
When I choose export folder option, it prompts to select a location and gives a success message, saying that the folder is exported successfully.
Can you please clarify the above?
Thanks and Regards,
Praveen B

Similar Messages

  • C7 how to access the PRIVATE folder in phone memor...

    C7-00 how to access the PRIVATE folder in phone memory?
    Meaning the folder C:\private
    With X-plore you can see the folder but it is marked as 0 kb.
    Edit: reason for this is that I had Angry Birds installed on memory C:
    Then I had changed my phones default game install memory to E: at the OVI store setup in the phone. On Monday OVI suggested that I should update the AB and so I did.
    Now it installed the new version to memory E: and all my game progress was gone.
    Just need to see if the save game still lays on C:\private\20030e51.
    Solved!
    Go to Solution.

    Ah, I'm sorry - I thought it was the private folder in C drive that I had managed to get into the previous week but it was the private folder in mass storage ...
    If you want to thank someone, just click on the blue star at the bottom of their post

  • How to create the Table of Content (TOC) in WEB

    Dear Sir
    Please help me
    How to create the Table of content (TOC) in Web Intelligence Report,
    Thanks
    Gnanasekarn.K
    Edited by: Gnanasekaran Kandasamy on Nov 20, 2008 11:12 AM

    Hi Gnanasekarn,
    You can create TOC in webi using Open Document, You can create link on the TOC and you can connect that link to open new report .
    With the help of open document you can open the specific portion of report.
    So you can achive your requirement using URL reporting or Open Document.
    Regards,
    Chaitanya Deshpande

  • How to customize the section's content in left bar?

    How to customize the section's content in left bar. I hope to change create job's content, recent job's content etc. Or it is impossible?
    regards
    ren

    HI Renliyuan,
    you can use custom web applets (Rss feeds, Html Code or URL) to display different content in action bar.
    Feel free to ask more
    Regards
    Nisman

  • Urgent-How to publish the screen in the web?

    Hi,
    I created a screen in SRM system, and wanted to publish the screen in the web, can any one tell me how to publish the screen in the web?
    thanks
    Murali

    Hi,
    R u want to publish ur screen in ITS .Then you have to create a IAC in SE80 internet service file.Rgt click the service and publish or run the pgm <b> w3_publish_services </b>,slt your serive and publish ?
    Cud you specify how you want to publish ? Thru ITS / BSP / EP ?
    Rgds,
    Jothi.
    Mark useful answers.

  • How to publish the hello to the localhost registry  in the jaxrpc exmaple

    how to publish the hello to the localhost registry in the jaxrpc exmaple.if you can,please tell me the steps or mail to me the code ?3ks
    [email protected]

    sorry,i have read the tuturial.but i cant underst.when i have deployed it,so is it published??for my opinion,the hello is the exmaple of java rpc.

  • How to control the permission for reports in share folder?

    Hi Experts,
    In OBIEE 11.1.1.6.0.
    I have created two folders in share folder,one is sales folder which contains some sales reports,and the other is dashboard folder which contains some dashboard pages that have these sales reports.
    So I want to new users who do not access the sales folder, but can view the sales reports in dashboard pages.
    How to control the permission for reports in share folder? Thanks for your help.
    Note: Dashboard pages have whole sales reports for showing.

    Hi User,
    1. Give access to the users for all reports.
    2. Give No Access to Retail Folder
    3. GIve read or full access to dashboard folder.
    To set the permission , click on the object/folder bottom left you will find Permission. you set there.
    Mark if correct,
    fiaz

  • How to migrate the  SAP KM Content to MS SharePoint

    Hi
    How to migrate the  SAP KM Content to MS SharePoint
    Is there any links that can give me brief view on this

    we can integrate portal content to share point check this below link for[  Integrating SAP Portal Content into Microsoft SharePoint Portal Server|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6844e48d-0901-0010-b4b2-d5666689ca8b] and [Integrate Microsoft Sharepoint Services into Knowledge Management|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ba1508-27e7-2a10-2295-9dab5b78c614]. hope these helpful.
    regards
    Mahesh

  • HT1203 I moved my Itunes media folder to my public folder in my home folder so that my wife can share my music when she logs on to my computer. Since then aperture has been unable to locate the music files and I cannot add any of my itunes files to a slid

    I moved my itunes media folder to my public folder in my home folder so that my wife can share my music when she logs on as a user. Since doing this Aperture cannot locate any itunes music files and so I cannot add any music to a slideshow. All of my existing slideshows no longer play music. Can anyone help?
    Thanks

    Thank you for your prompt response - I did as you said and did a drag and drop into the iTunes window - it imported and got my album art from the net. When I started Itunes with the shift key down I was prompted to choose a library but since I copied over the media folder and not the library folder I was unable to select that so I guess I will have to create a new library and add in all the music, videos, etc. unless I wait for my laptop and export the library or at least that seems to be the case? In short, all my data (iTunes media folder) is on my external drive and can be added to the blank iTunes screen but I can not choose a library folder. Is there anyway around completely making all those playlists again? I am not sure my laptop will survive the shop with data intact and really hate to start over on those.
    In an unrelated question - I collect old TV shows from the 1950's. Can I make playlists within the home video folder somehow?  In other words like one for Quiz shows, one for comedies, one for police and detective shows, etc. while I am remaking all my playlists for my music if I end up having to go that route?
    Once again thank you for helping me out. I am not too Itunes savvy and really appreciate you taking the time to answer.

  • How to publish the BI reports in portal

    Hi All,
    By Using  URL , how to create the iviews and how to assign to workset,folder and to page , how  we can create individually.
    Thnaks & Regards,
    sathish
    Edited by: sathish kakumudi on Jun 13, 2010 2:10 PM

    Hi ,
    Thanks for quick and valuble responce,
    Basically  I do not have  knowledge on this , earlier i use to send the URL lins to Portal consulatants and they use to publish in portal.
    Now here there is portal consulatant, but i should deliver the same.
    I created the folder
    under that as per your information created the three sub folders with BW, ROLE< Work Set
    and created under BW one i view .
    But for linking as you said add to work set is not appearing when i do right click on the i view.
    as mentioned the below , portal conete studio  all the work where should i perform.
    You create worksets in the Portal Content Studio using the Workset wizard, and then build structure hierarchies and assign content objects to the worksets in the Workset Editor.Right Click on the created Subfolder u201CWorksetu201D and choose the menu item Workset
    I am giving trouble to you , i do not know that is why iam giving trouble to you. please can you  elobrtae step by step.
    Thansk & Regards,
    sathish

  • How to Print the whole view content from a button on the View Layout

    Dear All,
    Good Morning All
    I am New to WebDynPro.Solution needed Urgently
    How to take print whole view content(lay out) in
    webdynpro application.i.e whatever it may be tablecontent or label or inputfield .
    Could you send the coded part briefly step by step from the beginning itself i.e
    i put the button in the view lay out below the printed parts(label or inputfield) name like show preview .
    Now my Question is what should i write in show preview function to take the print in label fields in the webdynpro view lay out
    B'cos i am new to webdynpro.Help me
    Thx in advance
    Regards
    Dhinakar

    Web Dynpro by default does not provide the option of printing the view content.
    However still you have a round about way of doing it. Create the an html page similar to the Web Dynpro page. Store the code into a String variable.
    String html="<html> ....<scripts>window.print()</scripts></html>";
    bytes[] source=html.getBytes();
    try{
    byte[] b=new byte[1];
    IWDCachedWebResource res=WDWebResource.getWebResource(b,WDWebResourceType.HTML);
    String url=res.getURL();
    }catch (WDURLException e) {
              // TODO: handle exception
    Now open the url in a new window and that would print the content of the html page.
    Regards,
    Noufal

  • How to Print the whole view content  from a button on the view

    Dear All,
    Good Morning All
    I am New to WebDynPro.Solution  needed Urgently
    How to take print whole view content(lay out) in
    webdynpro application.i.e whatever it may be tablecontent or label or inputfield .
    Could you  send the coded part briefly  step by step from the beginning itself i.e
    i put the button in the view lay out below the printed parts(label or inputfield) name like show preview .
    Now my Question is what should i write in show preview function to take the print in label fields in the webdynpro view lay out
    B'cos i am new to webdynpro.Help me
    Thx in advance
    Regards
    Dhinakar

    Web Dynpro by default does not provide the option of printing the view content.
    However still you have a round about way of doing it. Create the an html page similar to the Web Dynpro page. Store the code into a String variable.
    String html="<html> ....<scripts>window.print()</scripts></html>";
    bytes[] source=html.getBytes();
    try{
    byte[] b=new byte[1];
    IWDCachedWebResource res=WDWebResource.getWebResource(b,WDWebResourceType.HTML);
    String url=res.getURL();
    }catch (WDURLException e) {
              // TODO: handle exception
    Now open the url in a new window and that would print the content of the html page.
    Regards,
    Noufal

  • How to detect the 'full path' of an open folder

    I often end up with open windows that display the contents of a folder but no path information. One example would be a folder opened from clicking on a 'hit' from a Spotlight search.
    I often don't know where those folders are in the folder hierarchy on my hard disk (and have no desire to create an alias for them).
    Is there a way to quickly determine the path?
    Thanks.

    +You could also add the "Path" item to the toolbar:+
    +1. Open a Finder window.+
    +2. Click View>Customize Toolbar...+
    +3. Drag the "Path" item into the toolbar. It will be added on all Finder windows. To find the path of a folder, just click the icon.+
    Thanks, I didn't know that one. It still requires using the mouse to view the path, but according to Tom X there doesn't seem to be an option in OS X for automatic path display in the window's title bar.

  • How to create the Table of Contents in Preview for a pdf file?

    Does anyone know how to use the Preview to create a new table of contents or add a new link to the existing table of contents?
    Thanks

    Preview cannot do this - it is not a PDF editing utility. If you have the original document in an editable format (eg a Pages, or Word document) then you can edit it, print it, and from the print dialogue, save as a PDF. Otherwise you'll need the full Adobe product or similar to acheive what you want.

  • How to get the private and public key?

    there is my code,i want to get the public key and the private key �Cbut i could not find the the approprite method to solve the problem.
    import java.security.Key;
    import javax.crypto.Cipher;
    import java.security.KeyPairGenerator;
    import java.security.KeyPair;
    import java.security.Security;
    public class PublicExample {
    public static void main(String[] args) throws Exception {
    if (args.length != 1) {
    System.err.println("Usage:java PublicExample <text>");
    System.exit(1);
    byte[] plainText = args[0].getBytes("UTF8");
    System.out.println("\nStart generating RSA key");
    KeyPairGenerator keyGen = KeyPairGenerator.getInstance("RSA");
    keyGen.initialize(512);
    KeyPair key = keyGen.generateKeyPair();
    System.out.println("Finish generating RSA key");
    Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
    Cipher cipher = Cipher.getInstance("RSA/ECB/PKCS1Padding", "BC");
    //System.out.println("\n" + cipher.getProvider().getInfo());
    System.out.println("\nStart encryption");
    cipher.init(Cipher.ENCRYPT_MODE, key.getPublic());
    byte[] cipherText = cipher.doFinal(plainText);
    System.out.println("Finish encryption:");
    System.out.println(new String(cipherText, "UTF8"));
    System.out.println("\nStart decryption");
    cipher.init(Cipher.DECRYPT_MODE, key.getPrivate());
    /*i want to get the private and public key in this method ,but i found the result was not
    the one i expected to get,how to solve the problem?
    thanks in advance!
    System.out.println("private key:" + key.getPrivate().toString());
    System.out.println("public key:" + key.getPublic().toString());
    byte[] newPlainText = cipher.doFinal(cipherText);
    System.out.println("Finish decryption:");
    System.out.println(new String(newPlainText, "UTF8"));
    thanks in advance!

    System.out.println("private key:" +
    " + key.getPrivate().toString());
    System.out.println("public key:" +
    + key.getPublic().toString());
    key.getPrivate() returns an instance of PrivateKey and key.getPublic() returns an instance of PublicKey. Since PublicKey and PrivateKey are interfaces then they will return one of the concrete implementations. Check out the Javadoc for PublicKey and PrivateKey.
    When you know which concreate implemenation you have then you can use the methods on that object (by appropriate casting) to find the information you want.

Maybe you are looking for