How to Publish to the web using Dreamweaver
hi,
I'm a graphic designer with little code knowledge.
I keep uploading my "deploy to web" folder using dreamweaver to my web host but I keep getting and error message, I know somethings up when even dreamweaver can't preview the "main.html" file, I don't know what to do, any ideas?
(dreamweaver can only preview the "main.html" from the "run-local" folder probably because it's local).
thanks for the help
Hello,
Your suspicion is correct. Catalyst needs to load some resources in order to run your project. For security reasons, these resources can be loaded from your computer, or from the internet, but not both.
When running on your computer, the run-local .swf loads these resources, as well as any external resources in your project (videos, swfs, etc) from your local hard drive. So it will preview correctly in Dreamweaver.
However, when you publish your website to the internet, your Catalyst .swf needs to load resources from the internet, and therefore you need to use the deploy-to-web version.
Let me know if you have any more problems.
-Bear
Similar Messages
-
How to Publish on the Web a PDF document in Reading mode only
Hello,
I'm planning to post on my web site my manuscript in PDF format. I would like to make it available in a reading mode only.. I wonder if ADOBE LIVECYCLE Rights Management would allow me to do so in a safe manner. What would be the cost?
Thanks.
PATEGAThank you for your reply.
De : Test Screen Name
Envoyé : 15 septembre 2014 05:51
À : Gaétan Patenaude
Objet : How to Publish on the Web a PDF document in Reading mode only
How to Publish on the Web a PDF document in Reading mode only
created by Test Screen Name <https://forums.adobe.com/people/TestScreenName> in Adobe PDF Pack - View the full discussion <https://forums.adobe.com/message/6730511#6730511> -
Hello I am not able to published to the web using an FTP the test has a negative response I do not know what is required in Directory/path Protocol and port
If you use FTP then ftp is the protocol and 21 is the port.
Your webhoster will tell you what path to use.
You probably can read it in the FAQ/Help/Support pages where you host your website.
All difficult words are explained in manuals, dictionaries or wikis. -
Publish to the web in dreamweaver cs2
I am very new to building web pages and I thought I would
learn in dreamweaver. I am baffled from reading some of this techy
stuff in the books that I bought. I need someone who speaks regular
english to explain how I publish what I have designed, to the web.
ThanksThis might provide a good starting point:
http://www.peachpit.com/bookstore/product.asp?isbn=0321430840&rl=1
As to plain English vs. techy stuff, well without learning a
some of what
you call techy stuff you will be very limited as to what you
can do. IMO
anyone may be able to create a website but not everyone can
create a
worthwhile website.
Walt
"nixon31" <[email protected]> wrote in
message
news:f5ndfh$ark$[email protected]..
>I am very new to building web pages and I thought I would
learn in
>dreamweaver.
> I am baffled from reading some of this techy stuff in
the books that I
> bought.
> I need someone who speaks regular english to explain how
I publish what I
> have
> designed, to the web. Thanks
> -
How can I surf the web using my apple tv (second gen)
I've owned my apple TV for over a month now, paired with my home/built windows 7 pc, but am amazed at how limited the ATV is compared to my ipad, and iphone. Is it possible to surf the net using the Apple tv on my big screen, or is it only capable of airplaying videos from safari?
does anyone know if apple is planning on adding any apps to ATV to expand its capabilities in the future?Welcome to the Apple Community.
Gansette Clam wrote:
Is it possible to surf the net using the Apple tv on my big screen....
Fortunately, no it's not currently.
does anyone know if apple is planning on adding any apps to ATV to expand its capabilities in the future?
Nobody here will have any information about that here since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
Any responses you may receive may well be removed and would be wholly unreliable in any case.
If you believe that Apple's product may be enhanced in anyway you can leave feedback here. -
Dreamweaver CS3 fails when publishing to the web server using WebDAV
Dreamweaver CS3 fails when publishing to the web server using
WebDAV
using an earlier version (7.x/8.x) works fine.
Does anybody know if there is a solution for this.. This is
urgent..
Attempting to call the 1-800-833-6687 number fails with:
recording, music, rings as though someone will finally answer, but
gets a few dial tones and connection goes silent..
Thanks
J.If all of your credentials are correct, Server Name/IP Address, Username, Password, Root Directory and it's still not connecting, I would try toggling the Passive FTP checkbox.
If you still can't connect in DW, try downloading a third party FTP program like Filezilla (free) and uploading there. If the third party app doesn't work either, there is likely a problem with your credentials and you would need to contact your hosting provider to straighten it out. -
How to Run scenario from the web using HTTP web page?
Hi guys
Please let me know How to Run scenario from the web using HTTP web page?
Regards
JanakiramHi Janakiram,
ODI provides web based UI for running the scenarios using Metadata Navigator (read only of ur ODI components) and Lighweight designer (u can edit the mapping here).
Please explore how to install metadata navigator in ODI and have a look at ODI Setup document for more information.
Thanks,
Guru -
How to display all the surveys using content query web part
Can you please tell me how to display all the surveys using content query web part in more details? I also created a subsite and multiple surveys in that site. Then, I inserted a Content Query Web Part and select the List Type to be "Survey",
however, it returned nothing. Did I miss anything?Hi,
OOTB Survey List does not contain any
Content Types and it has the following structure:
Response entry is represented by
List Item
Response entry consist of questions and answers, where Question correspond to
Field and Answer to Item value respectively.
For querying Survey List via CQWP the following properties could be used
BaseType
<Lists BaseType="4">
ServerTemplate
<Lists ServerTemplate="102">
Example
To retrieve all the responses from Survey lists, specify List Type property as shown on picture
Reference:
http://stackoverflow.com/questions/17280778/display-all-surveys-using-content-query-web-part
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I have svg's in my adobe animate animation then import to muse via (oam) but when its published to the web I lose all my sag's. Why and how to fix?
I have svg's in my adobe animate animation then import to muse via (oam) but when its published to the web I lose all my sag's. Why and how to fix?
-
How to Publish Pages to WebServer from DreamWeaver
How to Publish Pages to Webserver from Dreamweaver.. Please
Advice..
Kinda forget :(
Or shall i use FTP software, which one is good?Which part of the F1 Help files are you not following?
Really. It's all
right there under FTP.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"owaisrauf" <[email protected]> wrote in
message
news:ek1npn$pbc$[email protected]..
> Can you explain me how to do it..
> I have gone to SITE and then Manage Sites, and then
clicked New.
> And put FTP information of the Server.
> But how shall i transfer files.
> PLease explain in detail i will appreciate it
> -
How do you surf the web while you are on the iphone?
How do you search the web while you are having a phone conversation? do you have to put the phone on speaker?
You dont have to, but it is hard to listen and look at the screen at the same time. You can also use a bluetooth headset or ear phone that came with the phone. Remember you can not do both at the ame time on Verizon.
-
How do I access the web-based utility
I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
How do I access the web-based utility...help!
Thanks.Access the router’s web-based setup page.
For instructions, click here.
Linksys Easy Answer 4030, applies to WRT300N
Upgrading the Linksys Router's Firmware
Hope this helps,
Lilla
Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE -
How can I invoke the web service manually in websphere?
Hi
I've developed a webservice application using Rational Application Developer (RAD). I deployed it in a websphere 6.1 application server, using the administration console to import the war file that I had previously exported with RAD.
My webservice application is listed in the "Enterprise Applications" section of websphere's administration console as started.
My question is: how can I invoke the web service manually? Is there some kind of websphere generated webpage that I can use to call it manually?
I tried http://<server:port>/<contextroot> and http://<server:port>/<contextroot>/<servicename> in a webbrowser, but it doesn't work. Is it possible to invoke the web service manually, or do I need to develop a client?
Thanks in advance
PedroHi Bo Wang,
Go to the Portal -> System Administration -> System Configuration
-> Portal Content folder
-> Open Visual Composer folder
There you can see the Webservice Systems you have created through VC.
You can delete the unwanted system here.
Regards,
Shemim -
How can i start the web analyzer to look the report
HAi
I created a query in Bex. And then i created the 'Web templates' for this query in WAD.
Now how can i start the Web Analyzer to look this query in the web. I want to see only through web analyzer.
So pls tell me how can i start the web analyzer. i mean step-by step method for opening the web analyzer and to look the report.
thnaks
kumarHi Ravi.
The web analyzer is not used to open templates created in the WAD. If you want to open the query in the web analyzer you should open it by calling the 0ANALYZER template ID. I.e. http://server.domain.com:port/sap/bw/BEx?cmd=&template_id=0ANALYZER&sap-language=EN
Alternatively you can open the web template created in the WAD in the browser by clicking "Execute in the Browser..." or just enter the template ID in the URL provided above.
Hope it helps (assign points if helpfull!).
BR
Stefan. -
How can scan coins for web use?
How can scan coins for web use?
Did you Google "Scanning Coins"?
http://www.telecoins.com/scanning.html
If you have a specific question after reading the (somewhat dated) article, please post back!
Maybe you are looking for
-
Error While running the JSP Code
This is the error message: A java exception has occurred during the processing of this request. Error occurred in JSP element starting at line number 20 javax.servlet.jsp.JspTagException: I/O Error: java.net.SocketException: Connection reset at
-
I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help
-
Error in adapter configuration
Hi folks, I get an error saying: Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consisten
-
Unable to select Certificate for Remote Desktop Connection
Hi, I have created a certificate with below parameter in inf file through a local Standalone 2008 r2 CA & imported it into Computer personal certificate store but unable to see this certificate entry while trying to select it under Remote desktop con
-
LMS 4.0.1 and User tracking with SNMP v3
Hi! (again ) I've another problem with our new LMS 4.0.1. We manage our devices with SNMP v3 but the user tracking don't want to work flawlessly. I've attached an example from our SNMP configuration. Basicly it's the same in our devices. 1st the prob