How to pull data out of a text field?

How could I accomplish the following.?
Current data in the column.
PREOPERATIVE DIAGNOSES:   1.  Right shoulder rotator cuff tear.   2.  Right shoulder biceps tendon disease with superior labral tearing.      POSTOPERATIVE DIAGNOSES:   1.  Right shoulder rotator cuff tear.   2.  Right shoulder biceps tendon disease with superior labral tearing.      SURGEON:  Jane, Doe, MD      ASSISTANT:  Jane, Doe, PA-C and Bob, Doe MD, orthopedic resident.  The assistance of a physician's assistant was required for limb positioning and placement of anchors.      ANESTHETIC: Interscalene block plus general.      DRAINS:  None.      COUNTS: Sponge and needle count were correct.      MATERIAL FORWARDED TO THE LABORATORY:  None.      OPERATION PERFORMED:   1.  Right shoulder arthroscopic rotator cuff tear.   2.  Right shoulder open subpectoral biceps tenodesis.   3.  Right shoulder subacromial decompression with acromioplasty.   4.  Right shoulder extensive glenohumeral debridement.   
I would like the following in MS Excel.  I would like to pull the header out into a separate column.
Header
NOTE_TEXT
PREOPERATIVE DIAGNOSES: 
1.  Right shoulder rotator cuff tear.  2.  Right shoulder biceps tendon disease with superior labral tearing. 
POSTOPERATIVE DIAGNOSES:
1.  Right shoulder rotator cuff tear.  2.  Right shoulder biceps tendon disease with superior labral tearing. 

The entire field of data is below.  I highlighted the header in Red where the data stopped being accurate.
5/7/2014
LINE
Split_Text
1
PREOPERATIVE DIAGNOSES:   1.  Right shoulder rotator cuff tear.   2.  Right shoulder biceps tendon disease with superior labral tearing.      POSTOPERATIVE DIAGNOSES:   1.  Right shoulder rotator cuff tear.   2.  Right shoulder biceps tendon disease with superior labral tearing.      SURGEON:  Bob, Doe  MD      ASSISTANT:  Jane, Doe  PA‑C and Jane, Doe , MD, orthopedic resident.  The assistance of a physician's assistant was required for limb positioning and placement of anchors.      ANESTHETIC:  Interscalene block plus general.      DRAINS:  None.      COUNTS:  Sponge and needle count were correct.      MATERIAL FORWARDED TO THE LABORATORY:  None.      OPERATION PERFORMED:   1.  Right shoulder arthroscopic rotator cuff tear.   2.  Right shoulder open subpectoral biceps tenodesis.   3.  Right shoulder subacromial decompression with acromioplasty.   4.  Right shoulder extensive glenohumeral debridement.      INDICATIONS:  Mr.XXXXX is a 71‑year‑old male with symptomatic right shoulder rotator cuff tear and degenerative tearing of his labrum and biceps tendon symptoms.  His AC joint is asymptomatic.  I had a long conversation with Bob regarding options.  We discussed nonoperative and operative options.  He would like to proceed with surgical intervention.  I explained the risks and this is well documented in my Clinic note.  On the day of surgery, I met with Bob Doe and his wife.  I reviewed the procedure and answered their questions.  They understand and agree to proceed.      OPERATIVE FINDINGS:  Reveal symmetrical range of motion.  The diagnostic arthroscopy reveals degenerative tearing of the anterior superior and posterior superior labrum.  There was thickening of the biceps tendon.  Minimal fibrillation of the superior subscapularis.  The subscapularis is intact.  There was high grade partial‑thickness tearing of the entire
2
supraspinatus and anterior infraspinatus.  The more posterior rotator cuff was normal.  There is chondral thinning of the articular cartilage of the humeral head and glenoid, but no significant chondral loss.  Within the subacromial space was a significant anterior spur off the acromion.      IMPLANTS:  Arthrex 4.5 mm PEEK corkscrew anchor x2, Arthrex 4.75 mm BioComposite SwiveLock x2.      DESCRIPTION OF PROCEDURE:  After in ["V12.72","V13.89","V10.05"] was counseled and plans, alternatives and risks were discussed, consent was obtained.  The correct operative extremity was marked in the preoperative holding area and preoperative antibiotics were administered.  An interscalene block anesthetic was administered without difficulty.  The patient was brought back to the operating suite and administered a general anesthetic.  The examination under anesthesia was performed and the findings are noted above.  The patient was placed in the beach chair position with bony prominences well padded.  The right upper extremity was prepped and draped in the usual sterile fashion.  A timeout process was completed.  A standard posterior arthroscopy portal was created followed by an anterior portal for the working instruments.  A thorough diagnostic arthroscopy was undertaken and the findings are noted above.  Attention was now turned to the extensive glenohumeral debridement.  The motorized resector was used to debride the frayed labrum anteriorly, superiorly and posteriorly.  The biceps tendon was transected.  The stump of the biceps tendon was debrided back to a stable margin.  The arthroscopic instruments were removed.      A 3‑4 cm incision was made in the mid axillary fold.  Hemostasis was obtained with electrocautery.  Dissection was carried down to the pectoralis major fascia, which was opened bluntly, exposing the underlying bicipital groove.  The long head of the biceps tendon was retrieved.  A #2
3
FiberWire was placed in the tendon 2 cm away from the musculotendinous junction.  A Cobb was used to remove soft tissue from the bicipital groove.  A 7 mm unicortical socket was placed in the shaft of the humerus.  The long head of the biceps tendon was placed within this socket and held in position with a 6.25 mm BioComposite SwiveLock achieving excellent purchase.  The sutures from the tendon and implant were tied together.      The arthroscope was reinserted into the subacromial space.  A standard lateral portal was created.  A thorough bursectomy was undertaken.  Motorized resector was now used to debride and freshen the end of the torn rotator cuff.  A combination of a motorized resector and ring curet were used to abrade the greater tuberosity.  A second lateral portal was created.  A 4.5 mm PEEK corkscrew anchor was placed in the posterior aspect of the tear 5 mm away from the articular cartilage.  All 4 of these sutures were brought up through the rotator cuff in a mattress fashion.  A second anchor was now placed in the anterior aspect of the cuff tear.  One set of sutures was brought through the cuff in a mattress fashion and the far anterior set was brought to the far anterior aspect of the supraspinatus tear as a simple suture construct.  This knot was tied.  The remaining sutures were tied as mattress sutures.  One limb of suture from each set was then positioned into a 4.75 mm BioComposite SwiveLock and impacted 1 cm lateral to the greater tuberosity creating an excellent double‑row suture bridge equivalent repair.  This was repeated with a second BioComposite SwiveLock and the remaining 3 sutures more anteriorly.  The tear was then inspected.  Range of motion revealed no gapping.      Attention was now turned to the acromioplasty.  The CA ligament was recessed off the anterior acromion with the radiofrequency device.  A bur was then used to flatten the anterior acromion.  Bone was removed until
1
5/7/2014
PAT_NAME
LINE
Split_Text
DAMROW,NEIL ARTHUR
4
the acromion was flat from posterior to anterior.  Bony debris was then removed and the subacromial space was copiously lavaged.  The arthroscopic instruments were removed.  Portal sites were closed with nylon.  The anterior incision was closed with 2‑0 Vicryl and Monocryl.  Sterile dressing was applied followed by a shoulder immobilizer.  The patient was extubated on the operating table and taken to the recovery room in good condition.  He tolerated the procedure well and there were no complications.  Estimated blood loss was minimal.      DISPOSITION:  The patient will be discharged home through Same Day Surgery per protocol.  He may remove his dressing on postoperative day #3 and shower and redressing incisions with Band‑Aids and gauze.  He will wear a sling for 6 weeks.  He may start some very gentle closed chain range of motion exercises in the next 7‑10 days with physical therapy at the Clinic.  The patient will follow up with me on postoperative day #12 at  for suture removal.  He was given oxycodone, MS Contin and Vistaril for postoperative pain.  He may have a refill of oxycodone or Vicodin in the first month postoperatively.         Jane,Doe, MD             D: 08/09/2013 12:51   T: 08/09/2013 13:37   MT: ag      Name:     DAMROW, NEIL   MRN:      0000‑00‑00‑00        Account:        0   DOB:      07/01/1942           Procedure Date: 08/09/2013      Document: E4204056
2

Similar Messages

  • How ti pull data to BI from MDM

    Hi all!
    Can anyone help with advise how to pull data to BI using MDM API?

    Hi,
    The MDM Java API is an application programming interface for the MDM software. It allows MDM customers to write customized applications for interacting with the MDM server. The list of functionality available through the MDM Java API includes Records Management, Extensive Search Capabilities,
    Check-in/Check-out, Matching Validation, Tables and Fields Management, User and Roles Management
    Repository Management, Syndication and Import. It uses an industry-standard SQL-based DBMS as a u201Ccontaineru201D for the repository database.
    BI- Integration Process:
    With the generic DataSource 0MDM_Generic, which is delivered by SAP, you can load the MDM-ID from the MDM Data Manager into the BI system.
    Create a data transfer process with the DataSource as the source and the master data as the target. The system generates the corresponding transformation.
    Create a process chain containing the InfoPackage with which the MDM-ID is extracted, the data transfer process with which the MDM-ID is loaded into the attributes, and an attribute change run.
    regards
    Hemanth

  • Best Practices for pulling data out of Documentum (w/Crystal and Universe)

    I was curious to see if we had any best practices to see if we can pull data out of Documentum.
    Thanks
    Ian S

    None, use what works.

  • How to pull data from oracle GL to planning

    Hi all
    Can one suggest me how to pull data from oracle GL in to hyperion planning(we are using hyperion planning 9.3 with limited licence for analytic services). i guess we can use HAL ..any thing else
    any help is appreciable
    regards
    M.V

    Hi
    I appreciate for your response. Yep you are exactly right it is data only, but I do have a problem these people have their licence of limited version of Essbase.
    Let me give you the information of their licence agreement.
    The licence for the hyperion planning- sytem9 programs includes a limited use license for both the hyperion Essbase- system 9 and hyperion Financial reporting - system 9 programs. Such limited use license means that the hyperion Essbase- system 9 and Hyperion financial reporting -system 9 programs may only be used to access data from the Hyperion planning -system 9 program.
    Specifically, the hyperion essbase- system 9 program cannot be used to create Essbase cubes that do not contain data used by the Hyperion planning- system 9 program and the Aggregate storage option component of the Hyperion Essbase - system 9 program may not be used.
    1) what it(licence agreement) really means - can you install Essbase, if not how can you create dimensions dynamically using planning.
    2) Is it possible without Essbase as far as I know its not possible
    3) are we going to face any issues with this licence.
    4) Is it possibe to pull data with planning
    I appreciate if any one resolve this issue
    regards
    M.V

  • How to get data out of XML?

    Hi,All.
    I am running SAX (JAXP1.01) in Applet to process XML file. My question is how to get data out of xml format according to the field name (@age,@rank etc)
    and write into string buffer seperated by comma.
    Should I use SAX or DOM? (file size is big)
    My xml as follow :
    <ROOT>
    <FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@team/relay}">
         <ObjectName>Field124</ObjectName>
         <FormattedValue>HUNTER</FormattedValue>
         <Value>HUNTER</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@age}">
         <ObjectName>Field125</ObjectName>
         <FormattedValue> 19</FormattedValue>
         <Value> 19</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@Rank}">
         <ObjectName>Field126</ObjectName>
         <FormattedValue>43</FormattedValue>
         <Value>43</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{results.athrel_name}">
         <ObjectName>Field127</ObjectName>
         <FormattedValue>1-1 NORRIE</FormattedValue>
         <Value>1-1 NORRIE</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield2}">
         <ObjectName>Field128</ObjectName>
         <FormattedValue>1:54.75</FormattedValue>
         <Value>1:54.75</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield1course}">
         <ObjectName>Field129</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield1std}">
         <ObjectName>Field130</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield2course}">
         <ObjectName>Field131</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield2std}">
         <ObjectName>Field132</ObjectName>
         <FormattedValue>QT</FormattedValue>
         <Value>QT</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@points(left)}">
         <ObjectName>Field133</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@pointsdecimal}">
         <ObjectName>Field134</ObjectName>
         <FormattedValue/>
         <Value/>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:decimal" FieldName="{@points(right)}">
         <ObjectName>Field135</ObjectName>
         <FormattedValue>0</FormattedValue>
         <Value>0.00</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@timefield1}">
         <ObjectName>Field136</ObjectName>
         <FormattedValue>1:55.98</FormattedValue>
         <Value>1:55.98</Value>
    </FormattedReportObject>
    <FormattedReportObject xsi:type="CTFormattedField" Type="xsd:string" FieldName="{@Rank}">
         <ObjectName>Field137</ObjectName>
         <FormattedValue>43</FormattedValue>
         <Value>43</Value>
    </FormattedReportObject>
    Repeat...
    </FormattedReportObject>
    </ROOT>
    ------------------------------------------------

    For big files use SAX: quicker and less memory usage.
    The xerces parser from Apache has some examples. Basically what you do is scan the XML, remembering what tag you are and once you find the right tag, read the contents.

  • How to pull data from a c/c++ Application

    I am working on a project to instrument a product which runs on java as well as c/c++.
    Is there a way to pull data from a c/c++ application to a MBean?
    I am able to push the data through a custom TCP Adapter, But I could not get much help on a pull model.
    Also I would like to get some pointers on instrumentation techniques / patterns.
    Regards
    Chandramohan

    I'm not aware of any JMX out-of-the-box support for managing C++ applications with JMX or MBeans, but you can find some ideas on how this might be done in [this thread|http://forum.java.sun.com/thread.jspa?threadID=5240363] from [this very forum|http://forum.java.sun.com/forum.jspa?forumID=537&start=0].

  • How to display data with the same text and key in the drop down list?

    Hi All,
    Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
    REPORT ZTESTING.
    TYPE-POOLS: VRM.
    DATA: NAME  TYPE VRM_ID,
          LIST  TYPE VRM_VALUES,
          VALUE LIKE LINE OF LIST,
          c(20) type c.
    *      c = 'select any'.
    data:begin of itab occurs 0,
          kunnr like kna1-kunnr,
          name1 like kna1-name1,
         end of itab.
    data:begin of jtab occurs 0,
          kunnr like kna1-kunnr,
          land1 like kna1-land1,
         end of jtab.
    PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                              default 'SELECT'.
    AT SELECTION-SCREEN OUTPUT.
    NAME = 'p_list'.
    VALUE-KEY = 'Name'.     "---> Data for key is the same with text
    VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
    APPEND VALUE TO LIST.
    VALUE-KEY = '2'.
    VALUE-TEXT = 'Country'.
    APPEND VALUE TO LIST.
    CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
    start-of-selection.
    select kunnr name1 up to 20 rows from kna1 into table itab.
    select kunnr land1 up to 20 rows from kna1 into table jtab.
    case p_list.
    when '1'.
    loop at itab.
    write:/ itab-kunnr,itab-name1.
    endloop.
    when '2'.
    loop at jtab.
    write:/ jtab-kunnr,jtab-land1.
    endloop.
    endcase.
    <Added code tags>
    Moderator Message: Please use the "code" tags to format your code snippet.
    Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

    shawnTan wrote:
    Hi All,
    >
    > Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
    >
    >
    REPORT ZTESTING.
    >
    > TYPE-POOLS: VRM.
    >
    > DATA: NAME  TYPE VRM_ID,
    >       LIST  TYPE VRM_VALUES,
    >       VALUE LIKE LINE OF LIST,
    >       c(20) type c.
    >
    > *      c = 'select any'.
    >
    > data:begin of itab occurs 0,
    >       kunnr like kna1-kunnr,
    >       name1 like kna1-name1,
    >      end of itab.
    >
    > data:begin of jtab occurs 0,
    >       kunnr like kna1-kunnr,
    >       land1 like kna1-land1,
    >      end of jtab.
    >
    > PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
    >                           default 'SELECT'.
    >
    > AT SELECTION-SCREEN OUTPUT.
    >
    > NAME = 'p_list'.
    >
    > VALUE-KEY = 'Name'.     "---> Data for key is the same with text
    > VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
    > APPEND VALUE TO LIST.
    >
    > VALUE-KEY = '2'.
    > VALUE-TEXT = 'Country'.
    > APPEND VALUE TO LIST.
    >
    > CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
    >
    > start-of-selection.
    > select kunnr name1 up to 20 rows from kna1 into table itab.
    > select kunnr land1 up to 20 rows from kna1 into table jtab.
    >
    > case p_list.
    > when '1'.
    > loop at itab.
    > write:/ itab-kunnr,itab-name1.
    > endloop.
    >
    > when '2'.
    > loop at jtab.
    > write:/ jtab-kunnr,jtab-land1.
    > endloop.
    > endcase.
    >
    > <Added code tags>
    >
    > Moderator Message: Please use the "code" tags to format your code snippet.
    >
    > Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
    This surely seems to be a bug to me(if not by design),  did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
    -Rajesh.

  • How to Pull data from sap r/3 tables to oracle tables

    how to fetch data from sap r/3 tables & data pulled to oracle table .
    GIVE THE APPROPRITE ANSWER FOR THIS.
    THANKS IN ADVANCE.
    If it is useful for me , i am giving point.
    regards ,
    Navita
    Edited by: NAVITA YADAV on Mar 7, 2008 2:07 PM
    Edited by: NAVITA YADAV on Mar 7, 2008 2:08 PM

    You need to perform some native SQL to fetch data. Before doing this connection must be exists b/w your R/3 and Oracle server.
    Basis team will help you to have connection.
    Check the connection name in the table DBCON.
    Check the below code to handle native SQL.
      SELECT SINGLE  DBMS
               FROM  DBCON
               INTO  DBTYPE
               WHERE CON_NAME = DBS.
      IF DBTYPE = 'ORA'.
        TRY.
          EXEC SQL.
            CONNECT TO :dbs
          ENDEXEC.
    ERROR Handling for Native SQL *************
          IF SY-SUBRC <> 0.
            MESSAGE `Docusphere connection failed.` TYPE 'I'.
            EXIT.
          ENDIF.
      EXEC SQL PERFORMING loop_output.
        OPEN C1 FOR
        SELECT  UK1, UK7, uk6, uk9, uk22, uk23, uk25    "field names of Oracle table
        FROM IIS_DOCS_AP10D
        WHERE ( UK2 = 'ZFIINVOICE' OR UK2 = 'ZFIPAYREQ' )    AND
        UK19 = 'E'                                           AND
        UK20 IS NULL
      ENDEXEC.
          DO.
            CLEAR W_OUTPUT.
            EXEC SQL.
              FETCH NEXT C1 into :wa1-arc_doc_id, :wa1-bukrs, :wa1-belnr, :wa1-gjahr, :wa1-wi_id, :wa1-ARCH_METHOD, :wa1-barcd.
            ENDEXEC.
    enddo.
    Reward points if helpful.................

  • How to pull data from a website..

    Hi all,
    My scenario is to
    1>Pull a bank statement from its website and store the corresponding data in r3.
    the point is,there is no particular file name or location..
    we should be able to get the bank statement within a specified period(given by user)..
    My interface will accept username password, from and to date for the bank statement.
    with this is it possible to pull the data out form the bank...
    Can we crack this..!!

    Hi,
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d06315a6-e66e-2910-039c-ba8bbbd23702
    inside a java proxy you just need to write a java code that will fetch
    the WWW page and return it to XI and you can have anything from the web
    inside XI
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • How to pull data from EJB and present them using Swing ?

    Hi all,
    I've written stateful session bean which connect to Oracle database, and now I must write stand alone client application using Swing.
    The client app must present the data and then let users add,delete and edit data and it must be flexible enough to iterate through the records.
    The swing components can be JTextField,JTable etc.
    How to pull the data from EJB and present them to users with the most efficient network trip ?
    Thanks in advance
    Setya

    Thanks,
    Since the whole app originally was client-server app and I want to make it more scalable, so I decide to separate business logic in the EJB but I also want to keep the performance and the userfriendliness of the original user interface, and I want to continue using Swing as the original user interface does.
    I've read about using Rowset and I need some opinions about this from you guys who already have some experience with it.
    Any suggestions would be greatly appreciated.
    Thanks
    Setya

  • How to pull data from sql server ( Seperate server) & upload it into sap

    Hi All,
    I have a SQL Server database in System1,
    data base name          DB1
    Table name                 TB1
    I want pull data from TB1 & upload the same into ztable in SAP.
    How I can I achive this in ABAP.
    Thanks in Advance
    Appropriate points will be rewarded.
    Arun kumar

    Hi Arun,
    You have to do the following:
    1. Create an entry in Trxn DBCA for SQL Server in SAP, you are creating a database connection for the SQL server in SAP.
    2. You use this connection, and write Native SQL stmnts...between EXECSQL...ENDEXEC to fetch the data..and then normal ABAP statements to put that data into your ztable.
    Regards,
    Raj
    For eg:
    TABLE DBCON Entry can be like this...depends on your External database..
    CON_NAME                                  Raj                Logical name for connection
    DBMS                                           MSS              Microsoft SQL Server
    USER_NAME                                <User name>     For SQL Serve
    PASSWORD                                 <password>            "    "
    CON_ENV                  MSSQL_SERVER=<server> MSSQL_DBNAME=<database name>
    DB_RECO                 Availability type for an open database connect  
    FUNCTION z_houston_connect.
    ""Local interface:
    EXEC SQL.
    CONNECT TO 'RAJ' AS 'V'
    ENDEXEC.
    EXEC SQL.
    SET CONNECTION 'V'
    ENDEXEC.
    *- Get the data from MS-SQL Server
    EXEC SQL.
    open C1 for
    select
    l.loc_id,
    l.loc_name,
    a.acc_id,
    a.acc_name,
    d.person
    from ho_loc_mast as l
    inner join snd_acc_mast as a on l.loc_id = a.loc_id
    inner join snd_acc_addr as d on a.loc_id = d.loc_id and
    a.acc_id = d.acc_id
    where l.loc_id = '001'
    ENDEXEC.
    DO.
    EXEC SQL.
    FETCH NEXT C1 into :wa-c_locid, :wa-c_locname, :wa-c_acc_id, :wa-c_acc_name, :wa-c_person
    ENDEXEC.
    IF sy-subrc = 0.
    PERFORM loop_output.
    ELSE.
    EXIT.
    ENDIF.
    ENDDO.
    EXEC SQL.
    CLOSE C1
    ENDEXEC.
    ENDFUNCTION.

  • How to pull Data from SQL server in FDM

    Hi Experts
    How to pull the HFM data from One SQL server to Another SQL Server using integration scripts in FDQM?
    regards
    Dev

    Could you clarify why you want to do this?
    If you are trying to synchronize two databases (apps) to have a backup or something running in a development environment, I would suggest configuring replication between the two databases. It would be much more efficient to do this at the SQL Server level than through the FDM application, IMHO.
    Charles

  • How to make html file from a text field data

    hi!
    I want to know how to make a file with .html extension and the data in this file should be from a text field. like i want to enter some thing in a text area and have to place it in a file on server side in html formate.

    so you told us what you want, but what is your question?

  • How to pull data from SAP for OWB

    I am new to OWB but old to SAP. My experiance is that you can not go straight to the database in SAP to pull data. How does the OWB SAP connector work?
    I think i need to write a RFC module to pull the data - but my PM is telling me that Oracle WB can do it all for me. Can you tell me how or point me to where i read about the details of how this is suppose to work.
    Please and Thank you.
    very lost in Florida

    I'm assuming you're using OWB 10g release 2. You can find the documentation related to the SAP connector here:
    http://download.oracle.com/docs/cd/B31080_01/doc/owb.102/b28223/ref_import_thirdparty.htm#i1094516
    This should give you a start.
    Antonio Romero
    Senior Product Manager, Oracle Warehouse Builder

  • How to get data out of quiz with POST or GET?

    Seems like a simple question, but I haven't yet been able to
    capture the results of a quiz yet. I want to fetch the POST data
    from the quiz in PHP using something like:
    $quizTotal = $_POST['total'];
    $quizCorrect = $_POST['correct'];
    Alternatively, I can use ASP:
    quizTotal = request.form("total")
    quizCorrect = request.form("correct")
    But I still haven't been able to get ANY data out of a quiz.
    HOW?

    benhenny,
    Are you trying to capture data locally and send to a
    server-side script - or
    use the existing LMS functionality to capture the post (for
    AICC) in a PHP
    script?
    Regards,
    Andrew

Maybe you are looking for

  • A challenging problem

    Hi Experts, I have a package.procedure in which the procedure is as follows:- CREATE OR REPLACE PACKAGE BODY xx_my_pkg as PROCEDURE items_exist(P_Source_Organization varchar2 ,P_Dest_Organization  varchar2 ,P_assembly_item varchar2)    AS       l_ite

  • System Overview empty in solution monitoring screen

    Hi, I am in the process of setting up monitoring for R/3 system from Solution Manager. Defined all required entries in SMSY. In the section Solution Monitoring -> System Monitor/Administration, the system overview is showing empty.... I mean SID name

  • How to moving image or graphic on the JPanel??

    Hi, Everybody got any idea to do using mouse listener to click and moving the image or graphic and then to put the object at any coordinate on the JPanel??? Thank to reply..

  • RE: Assets

    Hi All, Can anyone tell me about the asset processes? Give me brief explanation 1)  Main asset 2)  Low value asset 3)  AUC asset What is the involvement of logistics? internal order involvement? for AUC settlement rules? Project, WBS element, Network

  • Loan licensing process, and the configuration setting

    Dear Guru's, Can any one please explain me about loan licensing process, and the configuration setting? Regards, Pratap