How to pull resource (equipment) times into BI from ECC

Hi Experts,
i want to know How to pull resource (equipment) times into BI from ECC plz help me to this..
plz tellme step by step analysis ....how can find the data sources ....
Its very argent.........plz any one help me
Venkat

Hi
Didn't understand your question. Do you want to extract that field from R/3? Please elaborate

Similar Messages

Can any body tell me how to pull SAP-CRM data into BW

Hi BW guru`s,
Does anybody tell me how to pull SAP-CRM data into BW.
Is there any configuaration setings takes place in CRM system or BW system?
Provide few of CRM datasources names (Transaction data Datasources)
Please explain indetail and give some examples.
Thanks in advance,
venkat

Hi.......
SAP CRM uses BW Adapter to extract data from SAP CRM and send it to SAP Business Information Warehouse and SAP NetWeaver Business Intelligence. For mBDocs, BW Adapter extracts objects for CRM business transactions and CRM billing use the BAdI CRM_BWA_MFLOW. However, in releases prior to SAP CRM 2005, after using transaction code RSA5 to activate business content in SAP CRM, you must use transaction code BWA5 to activate the business content for the BW Adapter.
Check this link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
Hope this helps you.........
Regards,
Debjani........

How do I get video clips into Organizer from Elements?

I have broken my raw video into pieces in elements but can't get it to import into organizer.
I am using Elements 11 Trial.

The video is actually a football highlight film for our son and came to us as a single mp4 file with about 60 plays of video on it.
What I am trying to do is
1) Cut it down into 60 individual videos (which I did and currently have in my project).
2) Save the pieces off as individual video clips.
3) Get the ability to rank/rate each video and select the 25 or so that will make up the final video.
4) Polish/edit those that make the grade.
5) Organize and assemble.
Does this make sense?
t
Date: Mon, 19 Nov 2012 14:44:31 -0700
From: [email protected]
To: [email protected]
Subject: How do I get video clips into Organizer from Elements?
    Re: How do I get video clips into Organizer from Elements?
    created by whsprague in Premiere Elements - View the full discussion
karaannmbb wrote: I have broken my raw video into pieces in elements but can't get it to import into organizer. I am using Elements 11 Trial.Place the "Work Area Bars" (located on the time line) so that only a "piece" is covered. Then "Share" to a computer file. Pick a file type that suits your needs. Be sure to check the box titled "Share WorkArea Bar Only". Unfortunately, the clip piece will be re-encoded. PrE11 will do that well, but not perfect because any encoding always seems to loose a little. You did not say what camera you are using. The software that came with my Sony and Panasonic camcorders is much better for splitting clips into smaller clips. Some sort of magic is in them where re-encoding does not take place. The pieces have the same picture quality as the original.   So, when I do what you want, I break it into pieces with the camcorder software, the put the video together in PrE with all the creative tools it offers. Bill
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4859754#4859754
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4859754#4859754
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4859754#4859754. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have a power pc (g5) computer that I will soon be replacing with a current i5 or i7 mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

I have a Power PC G5 computer that I will soon be replacing with a current i5 or i7 Mini. How do I transfer the Time Machine files from the internal hard drive on the G5 to an external drive that I will later use with the Mini?

Hi, likely the easiest is to just poll the drive & get something like this...
Get MacScan...
http://www.apple.com/downloads/macosx/networking_security/macscan.html
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/
But if you have a good external drive already, just clone it.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/

How can I copy a time machine backup from one Time Capsule to another ?

How can I copy a time machine backup from one Time Capsule to another ? I bought a 1 Tb Time Capsule to replace my 512Mb Time Capsule. Now, I like to copy my time machine backup from the old Time Capsule to the new one so I can keep using my backup.

from this support article:
(click on image to enlarge)

Data Loading into Infocube from ECC.

Hi,
Can someone help me with the list of steps to be followed for loading data into infocube using Data trasnformation process. Steps to be perfomed in the system.
Also please share any links on various methods of loading data into infocube from ECC.
Thanks!

The steps would be *** foloows:-
1) Create the info-objects.
2) Create the infocube. If you a Planning area and the cube is a replica of the PA you can use /SAPAPO/TS_PAREA_TO_ICUBE to create the infocube.
3) You create a source system as a file system.
4) You create the datasource with the relevant fields.
5) You create a transformation for the cube using the datasource you created in step 4.
6) Last step would be to create DTP. When you create the DTP, on the first screen, check the checkbox for "Do not load data from PSA". This will give you additional fields to enter the file path. When this DTP is created and generated, goto the last tab of the DTP to execute.
This will help you to directly pull the data from the file and load it into the cube.
You can also create a Process chain to automate this process.
Hope this helps.
Let me know in case of any more information.

How to trigger the Process Chains in BI from ECC

HI Friends,
Can let me know How to trigger the Process Chains in BI from ECC. Please let me know.........

Hi,
1) Define a Custom ABAP Program (eg : Z_EVENT_RAISE)..........call the FM : BP_EVENT_RAISE or RSSM_EVENT_RAISE..........and trigger an event towards BW .........specify BW as RFC destination...........
2) Create a R/3 Job in SM36>> use the Program Z_EVENT_RAISE ......
3) In BW schedule the PC..........and in the Start variant use this Event..........
http://sapbiwtutorials.blogspot.com/2009/03/how-to-trigger-process-chains-in-bw.html
It can be help full
Regards,
Edited by: subba2010 on Aug 19, 2010 6:51 AM

How to pull the table data into SAP BI

hi all,
i have connected to oracle database and i can see the view of the tables in sap BI.can u please help me out how to see the data inside the table and how to load that table data into info cube.

Hi Vamshi ,
In R3 there is a t-code RSDBC through that t-code you make your data source .
I know you already make a connection between r3 and sql2000.
in RSDBC in logical system name you enter your connection name,and in table /view u should enter sql table name and make sure the table name which u enter in this text box should be store in sql in capital letters and fields should be in capital letters.
and generate your data source and execute it it show all the record .
Thanks for material its really gud
Ankit modi

How can I remove all Time Machine data from an external HD, while retaining the other folders/files on the disk?

I recently replaced my old Macbook Pro with a new Macbook Pro Retina.
The original MBP had Time Machine set up on an external HD, and I also had some manually saved/backed up files (stuff that didn't need incremental backups; very old stuff) on the disk as well, in folders. This worked fine and well for the life of the original MBP.
When I set up the MBPr, I did not elect to transfer everything over from a Time Machine disk, as I wanted a Fresh Install; I chose to just re-download/install the apps I needed from the App Store. Much cleaner, more stable. I updated to Yosemite immediately so, it gave me more of a clean install.
The problem is, Time Machine now won't read any Time Machine backups from that disk. Migration assistant can pull data from it, but it's a bit wonky. It was easier to just manually copy over what I needed.
Now, I just want to "reset", and completely remove the old Time Machine data from the external hard drive, since it is completely useless to me now (I can't access it on this computer, and it's taking up space). I want to remove the Time Machine data, as if it were never there, but keep my other folders/files that are on the disk (so, a format is not feasible).
I will then set the disk up as a new, fresh Time Machine disk for the new MBPr.
What is the proper method for removing Time Machine data from an external disk (which doesn't seem to be associated with this machine anyway)? I know a simple rm -rf will cause problems.
Thanks for any help provided.

See the yellow box in #12 of Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).

How can I use the Time Machine Backups from my Old Computer?

I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
Thanks
Richard

Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
http://www.macosxhints.com/article.php?story=20080128003716101
It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

How does delivery info flow back to CRM from ECC ?

Hi Experts,
How does the delivery info (Quantity Delivered present in the table CRMD_CUMULATED_I) get replicated from ECC to CRM ?
Is it through the middleware ? If not, how ?
Any pointers would be of great help.
Regards,
Kris.

hie kris,
did u have any answer?
regards,
marry.

How to get customers have blank Juristriction code from ECC to CRM?

Hi,
We have recently implemented CRM in our organization. We are planning to bring customers where they dont have region/country maintained i.e., they dont have juristriction codes maintained but still how could we get those customers from ECC to CRM system? we are at BBPCRM/600now.
Do we have to import any OSS note? Please advise.
thank you,
Anil

Hi ,
you can also check with standard program like :
program;-
SMOF_REQUESTN- to start CRM Request
SMOF_MONITOR_SMOFRSTAT- Monitor Request
these function module you can check:-
SMOF_START_DOWNLOAD_OR_REQUEST-Initialialize object for initial download in table smof_dstat
Functionality-Start a Download or a request. Is called from transaction R3AS
transaction :
R3AR3:- Monitor Requests
Hope it will useful.
thanks
Hemant ghiya

Equipment Download to CRM from ECC

Hi All,
We are trying to download the equipments from ECC to CRM, they are downloading to CRM individually.We want to get them in the hierarchy structure as they are in ECC. Like relevant IObjects grouped to-gether.
Whats the solution for this, please help out on this.
Thanks,
Praveen

Hi,
Below link you can find the details for replicating the Equipment from ECC to CRM.
SPRO> CRM>Master Data--> Installed base --> Replication of equipment from ECC --> Prerequisites and General Information for Equipment Replication
For equipment config download below are the activities.
Initial Download Procedure
1. Activate the adapter object EQUI_CONFIG in mySAP CRM.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Object Management > Business Objects and select the active/inactive box for EQUI_CONFIG.
Examine the filter settings for EQUI_CONFIG. For a each source site, set the filters to the same settings as for the object EQUIPMENT.
Don't forget to regenerate the filters!
2. Start the initial download process for EQUI_CONFIG.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Initial Load > Start.
Delta Download Procedure
1. Activate the object class EQUI_CONFIG.
Follow the menu path: Architecture and Technology > Middleware > Data Exchange > Delta Load from R/3 Back-End.
You may wish to activate the EQUI_CONFIG delta download if you are downloading changes for EQUIPMENT.
If you want R/3 to apply filters during the delta download, use transaction SM30 and maintain view CRMPAROLTP as below:
Parameter name = CRM_FILTERING_ACTIVE
Parameter Name 2 = EQUI_CONFIG.
Parameter Name 3 = EQUI_CONFIG
User = CRM
Parameter Value = X
Hope this helps.
Regards,
Chandrakant

How to insert the sysdate time into the database

hi all,
when i execute the following query,
insert into table_name
(date_field)
values
(to_date(sysdate, 'yyyy/mm/dd hh24:mi:ss'));
The value is inserted as 08-02-12 12:00:00. In this query, it always stores the default time as 12 a.m.
But i need to insert the original system time not the default one.
please help me how to rectify it.

I do not understand as to why you are using the to_date function on sysdate since sysdate is already in date format.
If date_field is of the data type date, then the following dml should work.
insert into table_name(date_field) values (sysdate);
In case date_field is a varchar2 field and you want to store the date and time in a string format, then the following statement should work.
insert into table_name (date_field)
values (to_char(sysdate, 'yyyy/mm/dd hh24:mi:ss'));

How to pull the Latest Time/Date of the update?

Hi BW gurus,
Hope everyone is fine.
I have a doubt to meet my user requirement.
I have a developed the infocubes and Infoset(combining only two master data infoprovider infoobjects) and created few reports on them.
Now the requirement is
"Client is asking for the latest date on which the data target is updated".
Say if we run the infopackage on a particular day say "Dec 1st 2006"
For example one cube is a full update, always by dropping the previously loaded data and one cube is updated with the delta update.
For all the reports , if we run the query, the report should give the information stating that the latest update was made on "UPDATED DATE=Dec 1st 2006".
how to achieve this?
Please somebody help me out.
Please tell me the step by step that I need to follow to achieve this.
Any kind of help is appreciated.
I am still in DEV.
Thanks in advance,
Regards
Sam Mathew

Hello
This can be achieved
First add an infoobject to your Data targets for Update date
Second , include the update date infoobject in your infosource
Map the infoobject with the field sys-datum which is current system date
So whenever you execute an infopackage, the sys-datum field will pick up the current date at which it is executed.
This is what you want in BW as latest update date of data target
Regards
Ganesh N

How to pull resource (equipment) times into BI from ECC

Similar Messages

Maybe you are looking for