How to pull video clip into Shake from final cut?

When I right click there is no send to that comes up. How do I get this to work?

Did you highlight all the clips involved first? Do you have FCP 5.0 or higher?
Shane

Similar Messages

How do I get video clips into Organizer from Elements?

I have broken my raw video into pieces in elements but can't get it to import into organizer.
I am using Elements 11 Trial.

The video is actually a football highlight film for our son and came to us as a single mp4 file with about 60 plays of video on it.
What I am trying to do is
1) Cut it down into 60 individual videos (which I did and currently have in my project).
2) Save the pieces off as individual video clips.
3) Get the ability to rank/rate each video and select the 25 or so that will make up the final video.
4) Polish/edit those that make the grade.
5) Organize and assemble.
Does this make sense?
t
Date: Mon, 19 Nov 2012 14:44:31 -0700
From: [email protected]
To: [email protected]
Subject: How do I get video clips into Organizer from Elements?
    Re: How do I get video clips into Organizer from Elements?
    created by whsprague in Premiere Elements - View the full discussion
karaannmbb wrote: I have broken my raw video into pieces in elements but can't get it to import into organizer. I am using Elements 11 Trial.Place the "Work Area Bars" (located on the time line) so that only a "piece" is covered. Then "Share" to a computer file. Pick a file type that suits your needs. Be sure to check the box titled "Share WorkArea Bar Only". Unfortunately, the clip piece will be re-encoded. PrE11 will do that well, but not perfect because any encoding always seems to loose a little. You did not say what camera you are using. The software that came with my Sony and Panasonic camcorders is much better for splitting clips into smaller clips. Some sort of magic is in them where re-encoding does not take place. The pieces have the same picture quality as the original.   So, when I do what you want, I break it into pieces with the camcorder software, the put the video together in PrE with all the creative tools it offers. Bill
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4859754#4859754
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4859754#4859754
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4859754#4859754. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to play an HD movie exported from Final Cut Pro?

How to play an HD movie exported from Final Cut Pro? on a mac???
thanks

How to play an HD movie exported from Final Cut Pro? on a mac?
Most FCP users export them in a high-effeciency distribution/delivery compression format (e,g,, H.264/AAC) targeted for a particular application and/or device. For example, you could export using H.264/AAC at full display resolution for playback in the QT Player at an appropriate data rate if your platform and display can handle the output. TV would limid the video to 960x540 at 30/29.97 fps and normal AAC audio to 160 kbps at 48.0 KHz. Files exported for display an the Internet would be restricted by the bandwidth being targeted. Etc, etc, etc. Unless the file will only be played on your own platform, what you do not want to do is use an FCP only compression format which would limit viewers to those recipients have the same FCP codecs installed.

Transfer clips and projects from final cut pro x trial to final cut pro x

Just bought the final version of Final Cut Pro X and cannot transfer my existing clips and projects from Final Cut Pro X Trial.

RRight-click on your library, select Open With and choose FCP.

How to combine video clips into one video clip using FCPX

I typed this into the search engine but could not come up with anything. How do you combine Video clips into one Video clip using FCPX? Thanks in advance.
Gar

The simple answer is to put the clips together in a project in the desired order and export (oops, the new word is share [YUK!]) a master file.
But maybe you should say a little more about the clips to determine whether the answer I've given is relevant to yor situation.

Best video format to export from final cut pro to encore

hi, i'm using final cut pro and no matter what format i export my video in, be it quicktime, mpeg2 or avi, there's still a slight degradation of picture quality when i import it into encore. mpeg2 by far suffers the least. but is there a best video format i can export from final cut to adobe so dat there's minimal loss in quality?

Sure, export it as an uncompressed AVI or QT file.

How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

Hi
I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either.
Here are the settings:
HD:
1 Video CODEC                 XDCAMHD50
2 Wrapper format           QuickTime Self-Contained
3 Bit rate                              50 Mbit/s Constant Bit Rate (CBR)
4 GOP                                   Long GOP
                                             Closed GOP
5 Time code                       Must include embedded time code. Start-timecode: 10:00:00:00
6 Movie version               UK Home Video Version
7 Delivery time                 As per contract. Supplier to specify filename, delivery format and estimated time of arrival via email at least 60 days before                                                           transmission unless otherwise specified in contract. This should be accompanied by an IMDB link.
1 HD video format           720 line progressively scanned (720p) @ 50Hz (25 FPS)
                                          1080 line interlace scanned (1080i) @ 50Hz (25 FPS)
2 Resolution                      1280 x 720
                                           1920 x 1080
3 Aspect ratio                    Content should be 16:9, however 4:3 will be accepted on exception (such as for older movies shot in 4:3)
4 Graphics                           Must be within 16:9 safe graphics area (EBU R95-2000)
5 Chroma format              4:2:2
1 HD audio format           24 bits/sample 48 kHz sampling rate
2 Track layout                    Track 1 – 2.0 Stereo L mono
                                            Track 2 – 2.0 Stereo R mono
                                            Track 3 – L
                                            Track 4 – R
                                            Track 5 – C
                                            Track 6 - Low frequency effects LFE
                                            Track 7 – L Surround
                                            Track 8 – R Surround

First of all, what are your sequence settings? Looks like they want stereo AND dolby 5.1 audio tracks embedded in the quicktime (I've delivered a few films like this). Do you have a surround sound mix?
You will almost always have more options and control in compressor over fcp so that's the way I'd go, but not sure compressor will give you the ability to match these specs.
Do you understand about safe zones for graphics? If not, post back.
I don't see any option to set the GOP in xdcam in compressor. This may be built in to the xdcam format.
I don't see any option for 720 xdcam hd in compressor.
There are many other tools available for this kind of work, but they may be out of your price range. You might want to just find a facility with experience in deliverying this sort of thing.

HT4589 Why did final cut x lose some fonts? how do I retreive and reinstall fonts from Final Cut X 10.0.7? that that isn't possible can I reinstall the previous version of final cut x?

Why did Final Cut X 10.0.8 lose fonts? How do I get these fonts back (namely Chapparal Pro and Trajan Pro)? If that is not possible, can someone tell me how to reinstall 10.0.7? Thank you for your help.

[email protected] wrote:
Great suggestion, but I don't have the Time Machine running to help solve that issue. If I hadn't had a backup of those fonts on another computer, where would you have recommended that I go to get them? Is there a free Apple font bank online? Thanks again.
I have these fonts, and did not install them specifically, so I had thought they must have come standard with OS X.
However, I did find an online list of the fonts that came with Lion: http://support.apple.com/kb/HT5098?viewlocale=en_US&locale=en_US; and likewise for Mountain Lion: http://support.apple.com/kb/ht5379
These two fonts are NOT in the list. Googling further seems to show that these fonts are from Adobe, so they may have been installed together with some Adobe software.

Can not import video clips into iMovie from Photos

I have some clips that I copied from my GoPro to my iPad via the Apple Camera Connection Kit. When I open iMovie there are icons for the clips but iMovie will not import them. The format is H.264. Is there a way of tricking iMovie?

Here is the problem, Im making a movie, I took all the video on my Kodak V610 Camera. I have the clips in .mov format. The clips are stored on an external disk in my iPhoto library.
Your digital camera probably uses MPEG-4 video (compatible with iMovie '08 in combination with µ-Law 2:1 compressed audio (which is not iMovie '08 compatible). While using the MPEG Streamclip MPEG-4 conversion will work, the prefered methof would be to use the QT "Movie to MPEG-4" option in QT Pro (quicker if you have it) or GarageBand (via the "Expert Settings option) to "pass through" you video while converting the audio to AAC (MPEG-4 audio). A mono setting of 64 Kbps with a 44.1 KHz sampling rate is a bit of "overkill" with respect to the original audio but will be quality compatible with what iMovie uses for its output presets.

Retiming after sending from final cut

I have tried to send a clip to shake from final cut 5.1.4. When I apply a re-time, I lose the edit points and all of a sudden I find I am dealing with the entire captured footage the clip is taken from rather than the clip from the timeline. I know that the roundtripping between final cut and shake is not the smoothest, but this is an all-out problem. Any thoughts?

MIchael Mench has an excellent tutorial about sending to shake for retiming here:
http://library.creativecow.net/articles/menchmichael/slowmotion/video-tutorial.php
It's really worth studying carefully.
A lot of people avoid the "Send to Shake" functionality altogether.
Just export the clip using the same settings, tweak it in Shake,
and import back into FCP.

Video quality bad when compresed from final cut pro to dvd studio pro. HELP

Hello,
I have a dvd project im working on and first i tried the video that i captured from final cut to just use in dvd studio pro but that didnt work. then i used the compressor and used the 60min high quality video and that looks even worse. what do u suggest i do?

You must get to know what these settings do to be able to use Compressor. Try using a 10 second test of your video file and encoded at different settings to get a feel for how compression works.
Min 4 and peak at 7, a difference of 3 between min and peak is a good start at CBR, but you must test.
Just like using a video camera, if you use the same exposure setting all the time, most of your pictures will be unuseable, either too dark or too light.

Export to Apple TV straight from Final Cut (QTP/Compressor)

In preperation for my Apple TV, I needed to know how I can "export to apple TV" from Final Cut Pro. I can import my 1080i HDV footage (from a Sony HC7) into iMovie, go to share, Quicktime, Expert Setting and simply click "Export to Apple TV" (which is obviously built into Quicktime now. But when I have the same footage in FCP and go to "Export"...I can't find "to Apple Tv" ANYWHERE! Not in "quicktime movie", "quicktime conversion" or "using compressor". Am I missing something? We can we not export to Apple TV with in FCP?
I've posted this in the Quicktime, FCP & Compressor boards incase it's another issue.
Thanks!

yes....absoultely.
here is my response from my same QT thread:
i know. i have that (QT 7.1.5)...and QTP. in my original post...i said i can do this in iMovie very easily (i explained the process)...but when i try to export from FCP..."export to Apple TV" is not an option.
if you have FCP...you might want to try. i know in theory you think you would...but unless you have FCP...you won't know. can someone post a confirmation that has FCP so people on here don't think i'm loony.
and if you have FCP and can do this...please explain how.
thanks!
gene

Exporting movie from final cut express4 direct to apple tv

How can I export my completed movie from final cut express 4 to apple tv? This will be my first attempt. I have looked at the forum but cannot find a solution. I am fairly new to computing, (oap)!

Welcome to the  Discussion Forums.
The easiest method would be to export using Quicktime conversion and select the 'movie to Apple tv' option from the resultant dialogue box.

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

How to insert a video clip into a timeline ?

Premier Pro CS7 how do I insert a video clip into the time line ?

Hi Chris Micha,
Welcome to the forums.
Please import the clip in the project panel, right click on the clip and select new sequence from clip option, you can also drag the clip to new item icon at the bottom of the project panel to create a sequence.
Regards,
Vinay

How to pull video clip into Shake from final cut?

Similar Messages

Maybe you are looking for