How to Purchase group configer in dev system and how to traverse quality

Hi All
I need ur help regarding for how to configer the Purchaseing  group in dev system and how to traverse to Quality and production.
Thanks
Happy

Hi,
You can create the Purchasing Groups using the following settings.
SPRO-MM-Purchasing-Create Purchasing Groups.
Create a new entry for Purchasing group & save it in a Transport request & transport it to QAS & PRD.
Note: We define the Purchasing Groups @ client level
Thanks & Regards,

Similar Messages

  • How to createWebservice from Functional Module inECC system and how to test

    Hi all
    i have one functional module in backend system i.e BAPI_GL_ACC_GETLIST. now i want to create a Webservice from the above functional module. once the webservice is ready in ECC system then how do we access in webdynpro thru model. i want to test the same webservice in ECC system itself, what is the procedure??
    can any body send the clear steps on starting from create of webservice and till to access the same in webdynpro.
    if we want to access from webdynpro thru model for the  same webservice which did in ECC system, is it require to deploy on J2ee engine by creating the same webservice or we can access that directly in Webdynpro??
    can you please tell me clear steps on the same rather than documents??
    Regards
    Suresh babu

    Hi Suresh,
    refer This ppt link will  help you.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/244e7923-0a01-0010-5887-fe0b0c6dbb8d
    Supraja

  • How to tranport XI config from DEV to QAS or PRD

    Dear Sir,
    We would like to know How to tranport XI config from DEV to QAS or PRD
    Thank you and best regards,
    Vimol

    Hi,
    Check some links on transporting Objects.
    Transporting IR,ID Objects using File System
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
    How to handle SLD for Tranporting Dev to Quality ser
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
    Transporting XI from DEV to QA
    Transporting XI from DEV to QA
    using CMS system. in XI
    1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
    4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
    5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
    http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content  .htm --> Configuring Groups and Transport Targets
    Look into this blog for how to export / improt IR and ID objects,
    /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
    http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
    /people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
    http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
    http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
    Here are some blogs.
    /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
    /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
    Re: Moving project from Dev to QA
    Error while exporting/transporting the Business system from Dev to Quality
    Transporting the scenario frm Dev Server to PRD Server
    transporting data from Dev to quality  using CMS
    Regards,
    Phani
    Reward points if Helpful

  • Is it possible to chenage logical system and how after a system is beeing u

    Hello
    I wander is it possible to chenage logical system and how after a system is beeing used for a while and how?

    Hello Tina,
    If the system is NOT a production system transaction BDLS can be used to change the logical system.  This would be necessary after refreshing a dev system from a production system, for example.
    If the system is a production system, I would agree that this is NOT advisable.
    Regards
    Greg Kern

  • Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

    Hi my name Abukar I had an old apple ID and I had problem with signing it so I decided to make a new apple ID with a new email address, so how can I link with two apple IDs and how can I get back all my previous apps that I purchased before, I cloud stuff

    It is not possible to do that.
    Allan

  • How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

    Hi,
    I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI".  While I'm waiting for  more authorisation to r/3 to carry it out and test this functionality.
    I'd like to ask a question to anyone who has implemented this type solution.  On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query.  I suspect when we run a query I would run it for only a period(using variable) to reconcile.
    My question is this.  Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
    Regards

    DEar Mark,
    There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
    On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
    hope this helps.
    Kindly assign the points if it works.
    Revert back if u need futher help/information.

  • Reset password sedadm (SED - dev system) and SEQadm (SEQ - QA)

    Hello Experts,
    Resetting sedadm or seqadm password at OS level, will it affect any where in SAP application.
    If so, what are the places we need to take care this user password in sap application.?
    Note: sedadm (SED - dev system) and SEQadm (SEQ - QA)
    Thanks
    Praba

    Hi,
    Check below link to change password:
    http://help.sap.com/saphelp_nwmobile71/helpdata/en/aa/1dc94af0fa11d3a6510000e835363f/content.htm
    Thanks
    Sunny

  • Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

    Is there a limit for the apps that i purchased or i can purchase as much i want? and how can i know the capacity it's taking? Thank you

    Yes you can buy whatever you want if your credit card is in good standing.
    Before you buy, read the size of the download in iTunes/App/iBook Store.
    Rule of thumb, you need to reserve about 10% of your total space.

  • What is the Weigh Bridge System and How to Implement

    Hi All,
    I have a requirement from a client to interface with Weigh Bridge systen and to generate the delivery order record.
    Could someone explain to me what is the Weigh Bridge system and how it is being implemented in SAP.
    Thank you!
    Regards,
    Yvonne

    Hi,
    this is to inform you that,
    this weigh bridge concept is very simple its an interface with other or software which the company which is implementing SAP.
    for EG:
    my company is cement company in production plant you will be getting raw materials in tons and out going finished products will also be in tons.
    in that plant there is weigh bridge where in flow of materials will be wieghed and if it matches to the paper which is getting along with then he ticks OK other wise NOT.
    the above case applies to out going of goods in tons also.
    regarsd,
    balaja

  • HOw to find how many users into into r/3 system  and when the log in

    HI
    I need to find who are others log in to R/3 system?
    HOw to find how many users into into r/3 system  and when the log in

    Hi,
    You can also use transaction code AL08 to see the list of users logged on with the transactions they are working on.
    Regards,
    Venkat

  • How to know the model of my Dv6 and how to install switchable graphics driver

    hi,
    I have a HP pavilion dv6 but I don't know what model is to download the drivers.
    Here are the specs:
    (this was purchase in Europe Portugal)
    - Intel core I5 M480 2.67Ghz
    - 500GB HDD 5600rpm
    - HD 6650
    - 4GB RAM
    - Finger print reader
    - 3x USB
    -Dvd Rom
    - x1 SD CARD reader
    - x1 esata
    - x1 HDMI
    - x1 Vga port
    - Camera HP trueVision
    - Dobly Advance Audio ALTEC lansing
    - Win7 Home Prem 64bit
    I need to install the AMD 6650 Driver with the switchable drivers options currently it only detects the Intel HD Graphics, installing the latest driver from AMD for the mobil 6650 will not work it doesn't dettect the graphics card.
    How can I know my laptop model ? and how to install the switchable and AMD drivers.. the laptop came with no CDs.
    Thank you,
    Arthur

    Get your full Model number or Product number from the Service Tag attached to bottom of laptop (may be under battery)
    How Do I Find My Model Number or Product Number
     Once you have the info, use the button at top of this page titled "Support", then click "Download drivers" from the menu. Enter your Product Number. After entering PN click 'Go". On the next page use the dropdown menu to select your Operating System, click Next. A list will populate with drivers/software.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How to write select statement before the loop and how to use read statemnt

    Hi,
    Recently our system has changed from 4.6 to ECC6.
    As its migrated its showing lots of errors like in between loop and endloop there should be no select statemnt........
    Can any one please tell how to write that coding in ECC6 , how can i change the code......
    In between loop and endloop i am having lots of select statemnts.....ple tell thye coding how can i select before the loop starts and
    how to read that internal table in loop.

    Hi Deepthi,
    You can do as per below:
    1) Select the required entries from the tables you need (VBAK, VBAP, KNA1, etc)
    SELECT VBELN ERDAT KUNNR
        into table it_vbak
        from VBAK
    where VBELN = S_VBELN. "Selection criteria
    If sy-subrc = 0.
    SELECT VBELN POSNR MATNR
        into table it_vbap
        from VBAP
    for all entries in it_vbak
    where VBELN = it_vbak-vbeln
    SELECT KUNNR NAME1
        into table it_vbak
        from VBAK
    where VBELN = it_vbak-vbeln.
    endif.
    2) Loop at the entries, and read internal table it-kna1 for customer info.
    Loop at it_vbak into wa_vbak.
    read table it_kna1 into wa_kna1 with key kunnr = wa_vbak-kunnr.
    if sy-subrc = 0.
    endif.
    loop at it_vbap into wa_vbap where vbeln = wa_vbak-vbeln.
    endloop.
    endloop.
    This is the basic idea and short example of how to extract entries and read internal table.
    Hope this helps.
    Regards,
    Patrick

  • Power management reportings - report how many computer are on during day time and how many during night time

    Hi All
    I'm just wondering if anybody could help me out. I'm quite new to configuration manager, and I've
    Is it possible for a specific periode to tell how many computer are runing during the day and how many are on during night time.
    I started working with power management reportings but i can't find a way to exclude non working days.
    Has anybody worked on this already? Is there another way or tool for this need?
    Thank you all in advance for helping.

    Hi,
    The following articles could help you to create a custom report.
    Creating Custom Reports by Using SQL Server Views in System Center 2012 Configuration Manager
    Create Custom Reports for ConfigMgr 2012 with Report Builder
    Note: Microsoft provides third-party contact
    information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Best Regards,
    Joyce

  • Ok somehow my sister deleted all my photos off my photo booth and now all my pictures in my iphoto i cant view them i just see white dots and boxes can anyone tell me how i can get my deleted photos back and how can view my photos again please !!!

    ok so somehow my sister deleted all my photos off photo booth and now all my photos on iphoto i cant view them i want to know how i can get my deleted photos back and how to view the rest of my photos please help !!!!

    Phonebooth is in your home folder under pictures with Iphoto and Ichat. Deleting pigtures from phonebooth should not remove any from Iphoto library. Something else had to happen.

  • How does the URL of DataSocket constitute?And how to use it in LabWindows/CVI ?

    Hi ！
    There's a problem puzzled me some days.How does the URL of DataSocket constitute ? And how to use it in LabWindow/CVI ?
    For example.I have downloaded a code in http://zone.ni.com/devzone/cda/epd/p/id/3787.I want to make it work properly.So I configure my DataSocket Server Manger according to the URL of this statement.
    DS_Open ("dstp://weather.natinst.com/weather/current",
    DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
    &dsCurrentHandle);
     My DateSockket Server Manger is configured as:
    However,it could not work properly when I debug it.
    There's a introduction at the top of the code."You may need to replace the references to weather.natinst.com to 130.164.140.10 if the DNS isn't working properly."So,I modified the statement into
    DS_Open ("dstp://130.164.140.10/weather/current",
    DSConst_ReadAutoUpdate, DSCurrentCallback, NULL,
    &dsCurrentHandle);
    but,it did work properly.
    We want to communicate with other computers via the URL of  DataSocket in LabWindows/CVI.Whereas,how could we make it ia the URL ?
    If anyone could help me solve this problem,I would appreciate it very much !
    Best regards.
                     xiepei
    I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

    Hi !
    Thank you very much for your reply! I will accept your advice.
    Besides,I have another question.If I want to visit other computers or other websites，how does the URL of DataSocket  I constitute ? Does the URL has any relation with the DataSocket Server Manger ？If does,how to configure the DataSocket Server Manager to let them connected.If they have no relation,how to use the DataSocket Server Manger ?
    After all,I want to know how to use it in LabWinows/CVI ？
    Thank you very much !
    Best regards!
    I wouldn't care success or failure,for I will only struggle ahead as long as I have been destined to the distance.

Maybe you are looking for