How to push the outstanding time sheet for terminated employee?

Hello Everyone,
Sometimes employees who are leaving the company forget to submit last time sheet. They get terminated before time keeper has a chance to push the time sheet. Are you aware of any method of pushing time for ex-employees?
I found the note on Metalink which explains ability for "further payroll processing to occur for the assignment up
to the Last Standard Process / Final Process dates" (Note: What is the Definition of Final Process Date [ID 824817.1]). I tried to follow it by changing Last Standard Process on the employee term form but I didnt get results.
Is there a way to push time for ex-employee?
I appreciate you advice.
Thanks,
Kasia

usual fix, reverse the termination and complete all the flow, then terminate again.
--Shiv

Similar Messages

How to find the previous changed pay for an employee

Hi,
I have to get the previous changed pay for an employee.
The problem is if the user enters a date range and if there is no change in the pay rate then i need to get the previous pay which is different from the current pay.
HR experts please help on this.

Please, read this weblog....
<a href="/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports to deal with HR Payroll reports</a>
Greetings,
Blag.

How to show the processing time taken for a BPEL process in BAM report.

Hi All,
I have the data as below in the Data object. I would like to show the time taken for each order to complete in the report.
instance Id     order Id     product Name     product Code     price     status     instance Time      updaterName
1360010     ord004     Guitar     prod003     2000     requested     9/22/2008 12:12:11 PM     Invoke_InsertSalesOrder
1360010     ord004     Guitar     prod003     2000     Approved     9/22/2008 12:15:11 PM     Invoke_OrderStatusUpdate
This data comes from simple BPEL process where sensors are configured at the start and end of BPEL process. Also have a human task activity in between to create the time difference.
In Enterprise link design studio, I tried to calculate the time difference using expression calculator and store it as calculated field. But that doesn't seems to work because when I execute the plan, second sensor data reaches only after human approval whereas first sensor data would be waiting for calculation and ultimately nothing comes into data object.
How and where the calculation be done to show the processing time in the report. Please someone throw some light on this.
Regards
Jude.
Edited by: user600726 on Sep 30, 2008 1:30 AM

I would suggest modifying your data object so that the data can all be in a single row and use the sensor at the end of the process to upsert (update) the row created by the sensor at the start of the process. The time difference between two fields in the same row is then an easy calculation on a BAM report -- No EL plan should be needed.

Entering time sheet for external service employee

Hi all,
My scenario is,
I created a external service for my network in the project. PR has been created. I've converted the PR into PO(Service) and then i maintained a HR master and assign the PO details. But when i try to enter the time sheet for that employee i couldn't.Anyone can explain the process flow for this scenario please.
Thanks

Once you create external service PO, the same should have been assigned to HR master. Try to create as group so that time entry can be done conveniently.
Check the below links. I guess, you are using CAT time entry transaction to create Service entry sheet. Use CATM transaction to create time entry.
http://forums.sdn.sap.com/thread.jspa?threadID=1485422
http://help.sap.com/saphelp_dbm600/helpdata/en/64/40048a470211d189720000e8322d00/content.htm

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

How to control the looping time of the for loop in 10 microseconds in labview?

I need to create a +/- 9 volt square wave with period of 20us using a D/A card (Not NI card). I can write command to the card using outport provide by Labview. Right now, I can generate square wave with 4ms period which is limited by the resolution of the wait until next ms icon I used inside the for loop. Could anyone tell me how to control the execution time of the for loop to about 10 us? Your help would be much appreciated.

I'm not sure if this will hep, but this answer seems to answer this question
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=50650000000800000029410000&UCATEGORY_0=_30_%24_12_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=microsecond+resolution+1ms&USEARCHCONTEXT_QUESTION_S=0

When will I receive my I phone 6 case which i ordered along with the Iphone6 ?As per the website it says october . How long is the wait time for the Iphone 6 case?

When will I receive my I phone 6 case which i ordered along with the I phone 6 ?As per the website it says October. How long is the wait time for the I phone 6 case?

While we have no idea within this Community Forum how long you would have to wait for your iPhone 6 Case, I can tell you that there would not be a "general" answer of value. Like any product that is available in different materials and colors, the inventory varies based on what you have specifically ordered. For example, I visited an Apple Store on the day after the iPhone 6 became available and was interested in the "Midnight Blue" Leather" Apple iPhone 6 Case. The store had plenty of all the other colors, but that specific case and color had sold out that morning.

How do i get siri to set a reminder for a time other than the appt time. For example: I want Siri to remind me at 10:00 pm on Monday that I have a dentist appt. at 9:00 am on Tuesday. She screws up the dates and times no matter what I say

What I can't figure out is how to set a reminder for a time other than the appt time. For example: I want Siri to remind me at 10:00 pm on Monday that I have a dentist appt. at 9:00 am on Tuesday. She screws up the dates and times no matter what I say

"Remind me at 10:00 pm on Monday". Siri: "Ok, just tell me what you want to be reminded about". "I have a dentist appointment on 9:00 am on Tuesday". Siri should set it up correctly.

How to avoid the long time consuming process of settlement on periodic basi

For investment Project(purpose of capitalisation) related expenses We would like to show it Directly in Balance Sheet rather than P/L A/C.Whether it is feasible or not?as per one of consultant it will be first hit the p/L and after settlement it will only be shown in B/Sheet.So how to avoid the long time consuming process of settlement on periodic basis.

Hi, could you write down an example? And what you mean by investment project-is this an WBS?

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to get the exact time when condition records has been created?

Hello All,
Can anyone thorw some light on - how to find the exact time on which a particular condition record has been created?
I have tried to get it from KONP {by inputting condition record number}, but unfortunately time is not tracked over there, but the date is tracked.
Await your valuable inputs on the same.
Regards,
Hrishi

Dear Hrishi,
Try with this
Go to display mode of the condition record through VK13 transaction from the condition record overview screen go to menu Environment >Changes>Click on Change report now system will take you to the Change Documents for conditions selection screen here you input proper selection data then execute now system will give the all the details here you can find the time also.
I hope this will help you,
Regards,
Murali.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

How to capture the Logout time in xMII

Hi Friends,
How to capture the logout time in xMII when the user clicks on Logout link
Thanks

Srikanth,
It would be better to use a database table(s) to store your audit trail information than an xml file, which could grow beyond a manageable size and then require housekeeping efforts and file rolling, etc. It would also be much easier to query user related information out of the logs, pareto charts for failed vs. successful login attempts, etc. if the data was stored in a database.
Have you considered modifying the Relogin.jsp page link in the portal's sub-menu bar? How about making your own version of this web page and changing the link pointer? Keep in mind that whatever result you come up with here will need a significant update for NetWeaver UME compatibility in version 12.0.
Regards,
Jeremy

How to get the end time of an Interface?

How to get the end time of an Interface?

Hi,
As per your reuirement. I will suggest to use IKM SQL to SQL append. and Before Insert statement in IKM u need to add one more step i.e update. Your update should be like this
command on sourse.
<%for (int i=0; i < odiRef.getDataSetCount(); i++){%>
<%=odiRef.getDataSet(i, "Operator")%>
select      <%=odiRef.getPop("DISTINCT_ROWS")%>
     <%=odiRef.getColList(i,"", "[EXPRESSION]\t[ALIAS_SEP] [CX_COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
from     <%=odiRef.getFrom(i)%>
where     <% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
     JRN_FLAG <> 'D'
     <%} else {%>
     (1=1)
     <% } %>
<%=odiRef.getJoin(i)%>
<%=odiRef.getFilter(i)%>
<%=odiRef.getJrnFilter(i)%>
<%=odiRef.getGrpBy(i)%>
<%=odiRef.getHaving(i)%>
<%}%>
Command on target..
UPDATE <%=odiRef.getTable("L", "TARG_NAME", "A")%> T
set <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> ='N',
<%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD1)")%> =SYSDATE
where (<%=odiRef.getColList("","T.[COL_NAME]", ", ", "", "UK")%>)
in(<%=snpRef.getColList("", ":[CX_COL_NAME]", ", ", "", "UK")%>) and <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> <> 'N'
check UD1 and UD2 columns.
Hope this will help you.
Regards
Saurabh

How to push the outstanding time sheet for terminated employee?

Similar Messages

Maybe you are looking for