How to put 66 ATA motherboard and 100 ATA hard drive together????

I have PB Ti 400MHz.
And I have just bought new Hard drive Seagate 80GB 7200RPM, and it works at 100 ATA and my motheboard is 66 ATA is there anyway to put these two together????
Alex Minaev

The ATA-100 harddisk should just slow down and match the ATA-66 bus on your PBs motherboard. I didn;t experience any issues putting a ATA100 drive in my iBook SE 466 (ATA33?) or the iMac DV (ATA33?) mrtotes

Similar Messages

How do I install lion and format the hard drive?

How do I install lion and format the hard drive, as though this was a new mac.

If your Mac is a 2011 model and originally came with Lion Pre-Installed by Apple then you can use the Internet Recovery HD system to Wipe/Erase the Complete drive and Re-Install Lion.
If it is an older model, even and early 2011 model, that did NOT come with Lion Pre-Installed by Apple you can not sell or give it away with Lion installed on it. You have to install the original version of OS X on it.

How to re-download Ps and Lr after hard drive is replaced

I have license for CC on two computers. Had it installed on my PC and Mac. Hard drive for the Mac was replaced. How do I re-download my products?

Download/install the trial versions, then activate them with your Adobe ID.

How do I back-up and replace my hard drive that has crashed on a Pavilion a350n with XP?

HP Pavilion Desktop a350n with Windows XP. System went through a CHKDSK scan, had a bunch of errors, then when it was done checking, a American Megatrends screen came up with status and at bottom says
"Master hard disk: S.M.A.R.T. Status: BAD, Press (F1) for Setup, (F7) to Continue".
Want to know how to proceed before I start to press buttons and screw something up. Thanks in Advance for any help you can give.....
This question was solved.
View Solution.

88feederups wrote: HP Pavilion Desktop a350n with Windows XP. System went through a CHKDSK scan, had a bunch of errors, then when it was done checking, a American Megatrends screen came up with status and at bottom says "Master hard disk: S.M.A.R.T. Status: BAD, Press (F1) for Setup, (F7) to Continue". Want to know how to proceed before I start to press buttons and screw something up. Thanks in Advance for any help you can give.....
Hello 88feederups, It seems your only recourse is to press the F-7 key to continue, and see if the system will boot to the desktop.
If you manage to get to the desktop, I would suggest trying to back up your important data, and make sure you have a version of Windows XP. You should also consider locating a new hard drive.
The failed Smart Test can be a precusor to the hard drive failing completely, if not already.
Here is the link for the specifications for your system and it shows the system shipped with a 160 GB Ultra DMA hard drive.
This is an IDE ATA type hard drive and not the newer Sata type.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

How to put my music on my external hard drive through itunes

How do i put music on my external hard drive from itunes after creating a folder.

Our iTunes guru Terence Devlin advises the following:
1. Quit iTunes
2. Drag the iTunes folder from your internal hd - located in ~/Music folder - to your external hd (which has to be formatted as HFS Extended (Journaled)). DO NOT delete the original one from your internal hd... yet!
3. When the transfer is complete, press and hold the Option(alt) key and fire up iTunes.
4. A "Choose iTunes Library" window will come up. Click on the "Choose Library" button.
5. Navigate to where the iTunes folder is located in the external hd.
6. Within the iTunes folder, select the iTunes Library file and click Choose...
That's it. iTunes will now display all your playlists, songs, movies, podcasts etc. At this point, should you wish, you can delete the iTunes folder from the internal hd to free up space.
More info:
http://support.apple.com/kb/HT1751
Or if you prefer a more complicated explanation:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

How to put a recovery partition on the hard drive

How can I create a recovery partition on the hard drive of my laptop. I had to reinstall the whole system, and tried to use the HP recovery software they sent me but it quit when it was about three quarters the way finished. I had to use a copy of windows 8 to put the system back on my laptop. After I got it all straighten out, I updated it to windows 8.1 and it seems like the computer runs a lot faster with windows 8.1 on it. Now I need to find away to install a recovery partition on my hard drive.
Thank You
Garry Crist

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of the computer or inside the battery compartment. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
A Recover partition is something the factory places on the computer. It is an image of the factory installation and the software required to restore the computer to a factory like state using that image. You will not be able to create a Recovery partition on your computer unless you use the HP Recovery Discs to return the computer to a factory like state. Please note the HP Recovery Discs and the resulting HP Recovery partition will only contain an image of Windows 8 that cannot be updated to reflect the installation of Window 8.1.
My suggestion is to use the Windows "System Image Backup" utility to create an exact image of the Windows 8.1 partition as it currently is. If your computer developes an issue or you need to replace the hard drive, all you have to do is "restore" the image to the computer. You will need to use an external USB hard drive or other media to store the image. Please see Windows 8.1 Tip: Use System Image Backup for instructions on creating and storing a "Windows - System Image Backup."
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

How to put Check Boxes and Radio button in Smartforms

Hi all,
How to put check Box and radio button in Smartforms ............ from web properties there is an option to use. But How to use.
regards,
Mohsin

u can declare the checkboxes or radiobuttons whatever in driver program and pass the same to ur form...

How do I backup and reformat my hard drive?

I have a gray loading bar during startup and it forces me to wait 5-10 minutes for my computer to start. This happens during every startup but does not happen when I start up using Windows 7 on my Bootcamp partition. I researched the problem and it told me to run Disk Utility. First, I verified and repaired the disk to see if that was the problem. Disk Utility fixed some errors, but the problem persisted. I verified disk and it said that my disk needed to be repaired. I booted up using my Mac OS X Snow Leopard disk and ran repair disk. It said that I should backup my data and reformat my disk. How do I do this? I've never done something like this before. I know that an external hard drive is required, so I'm prepared to order one. Additionally, how would I also backup my Bootcamp partition? I have researched that and found out about a program called WinClone that backups your partition somehow. I would appreciate it if someone could explain this to me as well. I have a Windows 7 partition. Lastly, how do you format an external FAT32 external hard drive into HFS+? And would you be able to use a HFS+ formatted hard drive on Windows 7 to store data? (Not necessarily backup)
Thanks!

Basic Backup
Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
Silver Keeper
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Steps 4-6 are optional but should be used on a drive that has never been formatted before, if the format type is not Mac OS Extended, if the partition scheme has been changed, or if a different operating system (not OS X) has been installed on the drive.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

HT2518 How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

Hi, did you try iTunes>File>Import?

I have an alias of one of my external hard drives in my trash. When I click on "show original" all my external H D 's and my Mac hard drive show up. How do I delete this icon from the trash without loosing all my files?

I have an alias of one of my external hard drives in my trash. When I tried to delete it, it showed that I was deleting 80,000 files and counting. I stopped the delete process and when I clicked on "show original" all my external H.D.'s and my Mac hard drive show up. How do I delete this alias from the trash without loosing all my files? When I tried to drag it back to the desk top, it just made a duplicate and remained in the trash. When I turned off the external H.D., the trash was then empty. Tried rebooting the computer and then turning the external hard drive back on and the alias shows up in the trash again. Much help appreciated.
Rich

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

Can I put my library on an external hard drive and use it between two computers?

Can I put my library on an external hard drive and use it between two computers? I have two MBP; I will refer to one as computer A and to the other as computer B. I would like to be able to plug in my external hard drive, boot up iTunes, and if there were any changes made to the library previous to its last time accessed on this compluter, they show up on that computer, regardless of being imported on the other.
A hypothetical example: I import three albums called 1, 2, and 3 on computer A over a week or so. I take the external hard drive and plug it into computer B. The entire library which was visible on A, is visible on B, including albums 1, 2, and 3.
Is this possible? If so, what files need to be copied onto the external? I'm trying some different combinations, trial and error basically. Hopefully someone knows and can answer before I mess up my library. I also want to do this to free up space on my computer. All importing will be done from disc.

iTunes/Preferences/Advanced : point your iTunes to the new location of the Library.
Set "Share on local network" in the Sharing tab, and you or everyone on the local network can play your music.
You make a backup first of the Library.
Move the follwing to the new location:
/Users/your username/Music/iTunes/iTunes Music
have fun.

How can I have my contacts on the cloud and my Mac hard drive?

How can I have my contacts both on the cloud and my Mac hard drive?

go to icloud.com

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

Can i use my time capsule to wirelessly backup my macbook and its external hard drive, which up until now was it's time machine and storage? How?

The external drive must be connected to the Mac using either USB or FireWire
You must remove the external hard drive from the list of items that are "excluded" from backups in Time Machine Preferences.
Here's how:
Open System Preferences (gear icon on the dock)
Open Time Machine
Click Options
Look for the name of the hard drive in the list of "excluded" items and click on it to highlight it
Click the -- (minus) button at the bottom of the list to remove the hard drive from the list of "excluded" items....so it will now be backed up
Strongly recommend that you do the first backup using Ethenret from your computer to the Time Capsule since the entire contents of the external drive will be copied on the first pass. Ethernet will be 3-5 faster than wireless.
Once you have the first backup done, you can use wireless for subsequent backups since they will nornally be much smaller....unless you add large files to the external drive.

Can i put my photos on my external hard drive and still open them in iPhoto

I am an amateur photographer and an art teacher and i have thousands of photos and music files on my computer that i would much rather put on my external hard drive so they dont take up so much room on my computer. I would like to extend the life of my computer as long as possible and want to keep as much memory free on the actual computer as i can. is there a way for me to put my pictures and or music on my external hard drive and still have it open regularly like it does now in iphoto or itunes?

they are backed up but there are thousands of them i have a small business selling my photos online and i was wondering if i could put them on the external hd and still have them open in iphoto or put my music on the hd and have it open in itunes so i dont have all of it on the computer. i take hundreds of photos a week and my photo gallery is not shrinking by any means any time soon so the more i can put in places other than my hard drive the better but i need them accessible at all times through my iphoto and other programs like photoshop illustrator etc.
DR.

How to put 66 ATA motherboard and 100 ATA hard drive together????

Similar Messages

Maybe you are looking for