How to put a table into another pop up window?
My problem now is how are we going to see a table in another window when we click a button???????
--liml
Your question seems not difficult to solve. Write an ActionListener for your button click, which can brings up a JFrame or JDialog. You can put your table on the content pane of the Jframe or JDialog, if necessary, with the help of a JScrollPane instance.
Similar Messages
-
How can i put below table into internalt table
how can i put below table into internalt table and want to add both internal table into 3rd internal table.
SELECT * FROM J_1IEXCHDR WHERE STATUS = 'P'.
WRITE: / J_1IEXCHDR-LIFNR,
J_1IEXCHDR-DOCNO,
J_1IEXCHDR-EXYEAR,
J_1IEXCHDR-BUDAT.
SELECT * FROM J_1IEXCDTL WHERE TRNTYP = J_1IEXCHDR-TRNTYP
AND DOCYR = J_1IEXCHDR-DOCYR
AND DOCNO = J_1IEXCHDR-DOCNO.
WRITE: / J_1IEXCDTL-EXBAS,
J_1IEXCDTL-EXBED,
J_1IEXCDTL-RDOC1,
J_1IEXCDTL-ECS.
ENDSELECT.
ENDSELECT.
please help
thanks in adavaced.hi laxman,
use for all entries and get the required data.
SELECT * FROM J_1IEXCHDR into table itab1 WHERE STATUS = 'P'.
if not itab1[] is initial.
SELECT * FROM J_1IEXCDTL into table itab2 for all entries in itab1 WHERE TRNTYP = itab1-TRNTYP
AND DOCYR = itab1-DOCYR
AND DOCNO = itab1-DOCNO.
endif.
so itab2 will have the common records...This will solve ur problem..
also u can do other method declare an final internal table with the common fields of the two internal table.
then after getting data in itab1 and itab2.
loop at itab1.
move-corresponding itab1 to itab3.
read table itab2 with key <give the fields> = ......
if sy-subrc eq 0.
move-corresponding itab2 to itab3.
endif.
append itab3.
endloop.
Regards,
nagaraj -
How to include one view into another view
Hi SDN's,
Could any please tell me,How to include one view into another view.
In my requirment.I want to create a 'Z' view for an interface .In that view i have to take,
1) Ship-to-email adrr by
LIKP-KUNNR -> KNA1-ADRNR
KNA1-ADRNR -> ADR6-ADDRESNUMBER.
2) E-mail addr of person who created the document.i.e
LIKP-ERNAM -> USR21-BNAME.
USR21-ADDRESNUMBER -> ADR6-ADDRESNUMBER
USR21-PERSNUMBER -> ADR6-PERSNUMBER.
In both the case we have to pass ADDRESSNUMBER to ADR6 table.
If we pass these condition it fails,B'Coz at a time it passes Two ADDRESSNUMBER and a PERSNUMBER.
So i created two which fetches only the email addr of person who created the document.and another view fetches Ship-to-email addr.
Now i want to include the second view into first view . Is it possible?or please
tell me someother way to get these email addresses in a single view.hi
as per my knowledge, nested views are not possible. However, while creating a new view, selection method will not giv u option to select the already created view(S) except the tables..i think so.
regards,
shamim -
Inserting data from one table into another table using PL/SQL
HI,
I am trying to insert values from one table into another using PL procedure, the values I want to retrieve from the table riverside1 are charac_id and charac_type and insert these values into another table called riverside2 , the stored procedure zorgs_gorfs(x,y) accepts two parameters which are 2 charac_id's of d characters in riverside1 then using insert statements inserts these characters from riverside1 into riverside2.
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
BEGIN
INSERT INTO riverside2
(charac_id)
VALUES
(x);
INSERT INTO riverside2
(charac_id)
VALUES
(y);
END zorgs_gorfs;
/This works but the problem im having is that when I also try to insert the charac_type as well as the charac_id it doesnt work below is the code:
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
BEGIN
INSERT INTO riverside2
(charac_id,charac_tye)
VALUES
(Select
charac_id,
charc_type
FROM
riverside1
WHERE
charac_id = x);
END zorgs_gorfs;
/can someone kindly sort me outmodify this sql
INSERT INTO riverside2
(charac_id,charac_tye)
VALUES
(Select
charac_id,
charc_type
FROM
riverside1
WHERE
charac_id = x);as
INSERT INTO riverside2
(charac_id,charac_tye)
VALUES
(Select
charac_id,
charc_type
FROM
riverside1
WHERE
charac_id in ( x,y));But my suggestion would be consider revising your approach. It does not look that good.
Thanks,
karthick. -
How to move a selection into another selection in elements 12
how to move a selection into another selection in elements 12
Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer -
How to put html file into a canevas?
How to put html file into a canevas?
Hi,
would require you to write a JavaBean that interprets the HTML (there are commercial versions of this available)
Frank -
How to put selected videos into one place (File)
How to put selected videos into a File so I can only show on TV the videos in that file
YYou have to describe your issue in more detail. Are you using iTunes? Trying to see it in Apple TV, etc, etc.
-
How to put Variable value into Labeltext of a subcomponent WIB
Hello
In our Web Based Planning tool we uses Tabstrib_control component and the Label-Text is filled like 'Plan 2008'. (Our BPS = 3.5 and Web interface builder)
I am looking for a way,how to put a variable into the Label field of the component. I am not sure if there is a possibility to enhance the labelfield with variable values.
Thanks a lof for any good idea.
Best regards
Christian
Our BPS = 3.5 and Web interface builderHello Christian,
Maybe I have a solution for your problem.
1. Create subcomponent "Selector variable" with your variable.
2. Hide this new subcomponent
3. Write in the Label-Text: <%=descr("Name of new subcomponent"/value)%>
If the variable will be selected by the user in the web interface, put the name of this selector in the field "Update upon Change of" in the properties of the new created subcomponent.
Hope this helps.
Friedrich -
How to put my podcasts into playlist folders? Can't drag'em.
How to put my podcasts into playlist folders? Can't drag'em.
I've subscribed to a number of podcasts & they appear in my iTunes window under the Podcasts section.
There i have
2 problems:
1st: I can't rearrange or group them so can listen consecutively to different topics.
I must listen to one, then come to the keyboard and select the next to start playing. Now, I know that I can get them to play consecutively once I've placed them into Playlist folders,
but that brings me to my second problem:
2) I can't drag and drop them into separate iTunes FOLDERS (by topics).
(Though I have been able to drag&drop separate items from my 'Music' section into iTunes playlist folders.)
But can't drag from Podcasts section into Playlists,
as everytime I try they just refuse to go in and scurry back to their starting position under Podcasts.
Zupwidiss? This can't be.
I would be grateful for your solution.
And also grateful if I could have easily found the solution explained
before I had to resort to bothering this forum with this question.
Just using my MacMini, Snow Lep.Thanks very much.
You have reminded of the
difference between
Playlists and Playlist Folders:
One can only drag things from the Master list into PLAYLISTS.
And can only drag Playlists into Playlist Folders.
I'm an older man, and easily confused by these things.
Many thanks to my friend in Germany.
P.S. Your English is excellent. -
How to put measures correctly into spreadsheet
Hi expert,
I loaded data into a planning model, and I can see data in BW and BEX, but when I put 'ACCOUNT' into row, and 'TIME' into column, I can't see 'measures' in spreadsheet, eventhough I drag 'measures' into spreadsheet from EPM pane, then update, getting blank for 'measures', it is gone. please tell me how to put measures correctly into spreadsheet.P.S If you are creating report by drag n drop on EPM pan, then same way need to add measure dimension in desired axis.
Share the screen shot.
Shrikant -
How to put 2nd column into 1st column in excel
Hello,
I have a question how to put 2nd column into 1st column in excel. Thank you.
Solved!
Go to Solution.Why the 1 iteration for loops?
Why the two Index Arrays? It is just trying to fix the problem created by the For Loops on the original 1-D arrays.
Both of those things are creating 2-D arrays that are complicating things and can be eliminated.
You can take your 2 1-D arrays, use Build Array and right click to set "Concatenate Inputs".
If you do have a 2-D array, you can use Reshape Array to make it a 1 column by N row 2-D array. -
How to convert database table into xml file
Hi.
How to convert database table into XML file in Oracle HTML DB.
Please let me know.
Thanks.This not really a specific APEX question... but I search the database forum and found this thread which I think will help
Exporting Oracle table to XML
If it does not I suggest looking at the database forum or have a look at this document on using the XML toolkit
http://download-east.oracle.com/docs/html/B12146_01/c_xml.htm
Hope this helps
Chris -
How to put a dvd into ipod touch
i have no idea how to put my DVDs into my ipod touch! can someone help? i have the new touch, 3g i think? it's a 32GB. i really don't feel like having to buy the movie on itunes when i already own it as a dvd. can someone please help me?
Sorry, but the Apple Forum Terms of Use don't permit us to discuss ripping commercial DVDs. Try Googling for such information.
-
Opening a pop up window from another pop up window
Hi i'm having difficulty doing this, i'm redoing the business
directory at this address:
http://www.localeyenewspaper.com/business.html
When you click on an ad, on some companies that have website
i want to put a link below the ad in the pop up window and when the
user clicks on it another pop up window opens with their site.
However when i tried to do this instead of another window opening,
the window with the advert went to the site, and it also stayed the
same size without resizing to the dimensions i need to display the
website, can anyone help me? Thanks<script type="text/javascript">
<!--
var newWin2;
function MM_openBrWindow2(theURL,winName,features) {
//v2.0custom
newWin2=window.open(theURL,winName,features);
//-->
</script>
<a href="
http://www.dmpowerwashing.co.uk"
class="style1"
onclick="MM_openBrWindow2('
http://www.dmpowerwashing.co.uk','dm','toolbar=yes,loc
ation=yes,status=yes,menubar=yes,scrollbars=yes,resizable=yes,width=1200,height=
800');return false;">
Note I've renamed the function and the function call (and
added "return
false" to the latter.) This means you'll no longer be able to
modify it
using the OpenBrowserWindow behavior in the Behaviors window.
emichael
Stuart.hamilton wrote:
> Here's the code for a pop up window that i want to link
to another pop up.
> Where would i put the new code in this? thanks
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=UTF-8" />
> <title>Untitled Document</title>
> <style type="text/css">
> <!--
> .style1 {font-family: Verdana, Arial, Helvetica,
sans-serif}
> -->
> </style>
> <script type="text/javascript">
> <!--
> function MM_openBrWindow(theURL,winName,features) {
//v2.0
> window.open(theURL,winName,features);
> }
> //-->
> </script>
> </head>
>
> <body>
> <p><img src="../ADs/Useful services
/Power-washing2.png" width="394"
> height="438" /></p>
> <p><a href="
http://www.dmpowerwashing.co.uk"
class="style1"
> onclick="MM_openBrWindow('
http://www.dmpowerwashing.co.uk','dm','toolbar=yes,loc
>
ation=yes,status=yes,menubar=yes,scrollbars=yes,resizable=yes,width=1200,height=
> 800')">www.dmpowerwashing.co.uk</a></p>
> </body>
> </html>
>
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia -
How to find screen no. of a pop-up window?
Hi friends,
Any one can let me know, How to find the screen no. of pop-up window?
Thank,
PunjaalaTo find screen no of a pop-up screen, in debuggin mode give break point at call screen statement.
Usually pop-ups would be called by call screen starting in (x,y) cordinates. so it'll stop at that point.
you can find out the pop-up details there.
Regards,
Joan
Maybe you are looking for
-
New Screen Flow entry for Approval Workflow
Hi, Can anyone please help me with this? I have a requirement where I need to provide a link on a JSPDynpage to the default approval workflow screen for any KM folder. We already have links to standard permissions and subscription screens which can b
-
Is there a way to randomly play podcasts and music in ios7?
Hi. I might be what you'd call, a podcast oversubscriber. On top of that, I have a ton of music, too. Before apple split the podcast app from the music app, I created a few smart playlists that podcasts & songs together -- which was great for long c
-
Mac OS X : ORA-09925: Unable to create audit trail file
I have followed the instuctions on Oracle's site: http://www.oracle.com/technology/tech/macos/index.html specifically the Blog pages by Sergio and Anthony and have encountered a couple problems: 1) I got this error when running the db config assitant
-
hi guys, I have an editable ALV where I need update a field on the same dynpro where is the ALV with the amount captured in the column(PRIM_NET), the field must be display the total sum of the column, some body could suggest me something, abou
-
Creating dynamic Radio Buttons and Buttons
Hello All, Presetly I am working on below functionality: I have an ArrayCollection which is like var sampleCollection:ArrayCollection = new ArrayCollection( [ {"filterID:1", filterName:"Occupied" }, {"filterID:2", filterName:"Unccupied" }] ); Now my