How to put a text into a picture package.

I want to print a set of 6 pictures onto a single sheet of paper with a heading on the top. I can do this by exporting all 6 pictures as jpegs, creating a page in my favourite word processor or publishing package and doing it all there.
However, Lightroom 3 allows me to create a page with the 6 photos, but I can't see any way to put a heading on top. Is there any way to do this?
While on the subject, is there any way to put a freeform text label below each picture?
Thanks
Tony

If you put it in a region on page zero, it will be inherited by all pages of the application.. Literally in the upper left corner? Even the login page? You could also modify the template page that your using from your theme, so that all pages would have this attribute, whichever you are more comfortable with..
Thank you,
Tony Miller
Webster, TX

Similar Messages

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara

How to put Variable value into Labeltext of a subcomponent WIB

Hello
In our Web Based Planning tool we uses Tabstrib_control component and the Label-Text is filled like 'Plan 2008'. (Our BPS = 3.5 and Web interface builder)
I am looking for a way,how to put a variable into the Label field of the component. I am not sure if there is a possibility to enhance the labelfield with variable values.
Thanks a lof for any good idea.
Best regards
Christian
Our BPS = 3.5 and Web interface builder

Hello Christian,
Maybe I have a solution for your problem.
1. Create subcomponent "Selector variable" with your variable.
2. Hide this new subcomponent
3. Write in the Label-Text: <%=descr("Name of new subcomponent"/value)%>
If the variable will be selected by the user in the web interface, put the name of this selector in the field "Update upon Change of" in the properties of the new created subcomponent.
Hope this helps.
Friedrich

How to put html file into a canevas?

How to put html file into a canevas?

Hi,
would require you to write a JavaBean that interprets the HTML (there are commercial versions of this available)
Frank

How to put selected videos into one place (File)

How to put selected videos into a File so I can only show on TV the videos in that file

YYou have to describe your issue in more detail. Are you using iTunes? Trying to see it in Apple TV, etc, etc.

How to put my podcasts into playlist folders? Can't drag'em.

How to put my podcasts into playlist folders? Can't drag'em.
I've subscribed to a number of podcasts & they appear in my iTunes window under the Podcasts section.
There i have
2 problems:
1st: I can't rearrange or group them so can listen consecutively to different topics.
I must listen to one, then come to the keyboard and select the next to start playing. Now, I know that I can get them to play consecutively once I've placed them into Playlist folders,
but that brings me to my second problem:
2) I can't drag and drop them into separate iTunes FOLDERS (by topics).
(Though I have been able to drag&drop separate items from my 'Music' section into iTunes playlist folders.)
But can't drag from Podcasts section into Playlists,
as everytime I try they just refuse to go in and scurry back to their starting position under Podcasts.
Zupwidiss? This can't be.
I would be grateful for your solution.
And also grateful if I could have easily found the solution explained
before I had to resort to bothering this forum with this question.
Just using my MacMini, Snow Lep.

Thanks very much.
You have reminded of the
difference between
Playlists and Playlist Folders:
One can only drag things from the Master list into PLAYLISTS.
And can only drag Playlists into Playlist Folders.
I'm an older man, and easily confused by these things.
Many thanks to my friend in Germany.
P.S. Your English is excellent.

How to put measures correctly into spreadsheet

Hi expert,
I loaded data into a planning model, and I can see data in BW and BEX, but when I put 'ACCOUNT' into row, and 'TIME' into column, I can't see 'measures' in spreadsheet, eventhough I drag 'measures' into spreadsheet from EPM pane, then update, getting blank for 'measures', it is gone. please tell me how to put measures correctly into spreadsheet.

P.S If you are creating report by drag n drop on EPM pan, then same way need to add measure dimension in desired axis.
Share the screen shot.
Shrikant

How to put 2nd column into 1st column in excel

Hello,
I have a question how to put 2nd column into 1st column in excel. Thank you.
Solved!
Go to Solution.

Why the 1 iteration for loops?
Why the two Index Arrays? It is just trying to fix the problem created by the For Loops on the original 1-D arrays.
Both of those things are creating 2-D arrays that are complicating things and can be eliminated.
You can take your 2 1-D arrays, use Build Array and right click to set "Concatenate Inputs".
If you do have a 2-D array, you can use Reshape Array to make it a 1 column by N row 2-D array.

"How do you turn text into a hyperlinx can't find menu at top in Muse

"How do you turn text into a hyperlinx can't find menu at top in Muse

Hello,
In order to turn a tet into Hyperlink, you first need to select the text and then in the toolbar look for "Links" option. Click on the dropdown and either select one of the pages or type in your own link.
Please have a look at the video below : http://trainingwebcom.worldsecuresystems.com/SachinFTP/2013-02-15_1945.swf
Hope this helps.
Regards,
Sachin

How to put a dvd into ipod touch

i have no idea how to put my DVDs into my ipod touch! can someone help? i have the new touch, 3g i think? it's a 32GB. i really don't feel like having to buy the movie on itunes when i already own it as a dvd. can someone please help me?

Sorry, but the Apple Forum Terms of Use don't permit us to discuss ripping commercial DVDs. Try Googling for such information.

ID CS5: How to include additional text into a table of contents and how to hide text from it?

I have the following problem:
1. I'd like to include additional Information in my table of contents which I don't want to appear in the text I refer to.
Example: I do have a picture with a caption saying:
picture 1: Blablabla.
And I want to have the source of the picture as additional information in the table of contents:
picture 1........Blablabla (source: thisandthat)........23
Still I don't want this additional content to disappear, as soon as I update the table of contents!
How can I achieve that?
2. And how can I have this the other way round?
Let's say I want the source in the caption, but not in the table of contents.
So the caption says:
picture1: Blablabla (source: thisandthat)
but the table of content says:
picture 1........Blablabla.....................23
I was trying to achieve this by two different praograph styles in the caption. One which would be listed, and one which wouldn't be listed, but this of course resulted in always having two paragraphs in the caption, which I'd like to avoid:
picture1: Blablabla
(source: thisandthat)
Any solution to this?
Best Regards,
Rainer Schwachsinn

Sorry, missed the second part of the question. I think the only way to do that is to use invisible "dummy" text of some sort, and if you're going to do it for some entries, you might as will do it for all.
One of the easiest ways is to put the text you want inthe TOC into an anchored frame attached to the actual heading in the text (so it moves along with it). Use a unique paragraph style for this text, and include this style, not the one applied to the headings inthe text, to make the TOC. I usually use a character color of red to make it satnd oout so I don't forget it's there, and the position on the page isn't really critical. Select the anchored frame, open the Attributes panel and make it non-printing. You'll see it in editing mode, the TOC will pick it up (as will variables, if required) but it will disappear on output.

How do I wrap text around a picture in Pages 5.5?

Using Yosemite, MacBook Pro (late 2009) Pages v. 5.5. Previous version of Pages let me wrap text around pictures in newsletters. I can't find this option or how-to anywhere in v. 5.5. How do I wrap text around one side or another of an inserted picture?

Assuming your text is in your document, and you insert a picture. While the picture is selected, you will notice that on the right format panel, the Arrange tab has appeared. Select either Stay on Page, or Move with Text — depending on your image goal — and then look at the Text Wrap feature. By default, once you drop a picture into the document, it is set to Automatic. This means you can place your pointer in the image and just move it around, while text flows around it. The smaller the image the better the flow effect. This is a discussion about Pages v5.2.2, but it will work the same in v5.5.
Let's say you want the image flush aligned to the left margin, but want text to flow above, to the right, and below the image. Change text wrap automatic to Around, select the right icon for Text Fit, and adjust your spacing up or down for the proximity of the text wrap to the image. It looks like this with Text Fit spacing set to 9 pt.

Dvt:barGraph how to put anotation text at multiple positions

We are rendering some data in the form of bargarph using dvt:barGraph.
Here we want to achieve couple of usecases which are as following
1) we need to put anotation text at multiple positions on the graph.
2) We are using Reference Objects in the bar graph. The text that appears as tooltip for these Reference Objects, we want to render that text embedded in the reference objects as static text.
how to acheive the above?
I am using Jdev 11.1.1.3.0
Thanks
Ajay
Edited by: Ajay on Mar 13, 2012 6:06 AM

The "clipboard" service for copy and paste between applications on a PC is usually a built-in function of the operating system - Mac, Windows, Linux, etc. There are applications available for extending the clipboard feature; I use one named Clip Trakker which allows me to save multiple "text clips" of ''[say]'' text from the internet which are saved in Clip Trakker, and then paste each of those "text clips" into a different program like Word ''[I actually use Libre Office]''.
I am not familiar with applications for Mac OSX, so I can't make any recommendations about an application.
As far as extensions for Firefox, there are many extensions that come up in a [https://addons.mozilla.org/en-US/firefox/search/?q=clip&appver=any&platform=all search for "clip"] at the Add-ons Mozilla Org website. You can look to see if you can find any that will do what you want to do, like maybe this one: 
https://addons.mozilla.org/en-US/firefox/addon/clipboard-plus/

How to drag a file into a picture control in a runing VI?

When the VI is runing, LabVIEW allows users to drag a file from windows explorer to the File path control to get the path. But how could I drag a file into a picture control to get some event?
Since the Picture control will also used to reponse to some other events so put the a transparent file path control on top of it may be the last idea in my mind...
Is there any other options??
Thanks guys!

In Dreamweaver CS4, whenever I try to drag a newly updated version of a swf file into a certain directory / folder in the Files panel of the Dreamweaver interface, the file simply gets placed under my website's root instead.
You are dragging the file from OUTSIDE of DW (using Explorer/Finder) and dropping it within DW's FILES panel (I didn't think you could do that!)? Or you are dragging it from within the FILES panel, but from outside your site (by choosing "Local Disk" from the drop list)? I think what you are seeing is the best you will get with that procedure. Try going to "Local Disk" and copy the file, then return to your site and paste it where you want it.

How to put a text in Child query

HI,
I need to put a text when dont find child records which says "PO not found",
Oracle 10G
report design consist of one man group and child records
ex:
main subquery
P44001 desc BOMqty total date1 qty line1 ponum1
....................................date2 qty line12 ponum1
....................................date2 qty line3 ponum2
P44002 desc BOMqty total “no po found”
P44003 desc BOMqty total date4 qty line4 ponum1
....................................... date2 qty line2 ponum1
....................................... date2 qty line5 ponum2
Thanks,
Harsha

Hi, Harsha,
That sounds like a job for OUTER JOIN.
For example, using scott's tables:
SELECT d.deptno
, d.dname
, NVL2 ( e.deptno
 , e.ename
 , 'No emp found'
 ) AS ename
FROM scott.dept d
LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno
ORDER BY d.deptno
;Output:
` DEPTNO DNAME ENAME
 10 ACCOUNTING CLARK
 10 ACCOUNTING KING
 10 ACCOUNTING MILLER
 20 RESEARCH JONES
 20 RESEARCH FORD
 20 RESEARCH ADAMS
 20 RESEARCH SMITH
 20 RESEARCH SCOTT
 30 SALES WARD
 30 SALES TURNER
 30 SALES ALLEN
 30 SALES JAMES
 30 SALES BLAKE
 30 SALES MARTIN
 40 OPERATIONS No emp foundNote deptno=40, which occurs in dept, but not in emp.
If ename happened to be NULL in emp, then the NULL would appear in the ename column. If ename can not be NULL, then you can replace the NVL2 expression witH
NVL (e,ename, 'No emp found')
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
If you can show the problem using commonly available tables (such as those in the scott schema) then you don't have to post any sample data: just post the results and the explanation.
Always say which version of Oracle you're using (e.g., 10.2.0.4.0). There is no version 10F or 10H, so it's kind of silly to say you have 10G
See the forum FAQ {message:id=9360002}

How to put a text into a picture package.

Similar Messages

Maybe you are looking for