How to put effects on multiple linked clips simultaneously

I want to dynamically link all of the vocal clips at the same time, if possible, from a Premiere Pro CS4 Project to Soundbooth CS4 and "warm" them up a bit in a sort of batch process. Can this be done, kind of like precomposing in AE or using an adjustment layer? They were all recorded in an interview setting and are virtually identical--just two people with same mic, etc.
Thanks, everyone.

I am not adding an effect. I am adjusting ONE single effect within multiple clips that have multiple effects. if I just copy and paste it copies ALL the effects, which I do not want, because I have different effects for different clips. i.e. different color schemes etc.
In otherw ords, I wnat to be able to EDIT effects in multiple clips. E.G, I have added color correction, "looks" filter, etc to multiple clips.  I just want to change ONE of those effects in multiple clips without disturbing the rest of the effects in those clips.

Similar Messages

  • Applying effect to multiple master clips in bin

    Basically I would like to apply the timecode reader effect to multiple master clips in a bin so that I can batch export those clips to an external drive for the director to take and watch at home.
    I know how to apply an effect to multiple clips in a timeline, but is there a way to do it right to multiple master clips in a bin?
    Right now my process is to duplicate the clips for a scene as new master clips in a separate bin, one by one apply the timecode reader (as favorite effect) to each clip, then batch export those clips to the external drive.
    As I get to the scenes with many many clips, applying the effect gets a bit tedious. Just hoping there's a faster way I'm not thinking of or unaware of.
    Thanks.

    It always seems like a strange thing to do, but the standard for these kinds of things seems to be to put everything on the timeline, apply the effects (you know how), and then drag them off the timeline into a fresh bin.
    It's very quick and does the job just fine, but always somehow feels.. wrong.
    If there were a way for a timecode reader to be applied by Compressor, then it would be much more of a batch thing. But I don't think there is.

  • How do I effectively remove multiple duplicate contacts from S5?

    How do I effectively remove multiple duplicate contacts from Samsung S5? Genius who sold me the phone duplicated ALL of my existing contacts.

        Thank you for reaching back out to us, if your contacts are backed up by GMail, if you log in to your account on a PC, they should appear online under the Contacts tab. Try this also, if you go to Contacts>Settings icon(three vertical dots button) Settings>Contacts to Display> What options are selected? This screen will help you pick and choose what contacts list to display.
    NicandroN_VZW
    Follow us on twitter @VZWSupport

  • How to change effects on multiple clips

    Is there a way to change and/or adjust effects/filters on multiple clips at once?  I have added an effect on a scene and I want to adjust the overall level to all the clips, i.e. the amount of the effect applied.
    I highlighted all the clips and made the adjustment in the Inspector, but it only made the adjustment to one single clip even though I selected all.  I REALLY do not want to sit and adjust each one seperately.
    Anyone with an answer?  Thanks

    I am not adding an effect. I am adjusting ONE single effect within multiple clips that have multiple effects. if I just copy and paste it copies ALL the effects, which I do not want, because I have different effects for different clips. i.e. different color schemes etc.
    In otherw ords, I wnat to be able to EDIT effects in multiple clips. E.G, I have added color correction, "looks" filter, etc to multiple clips.  I just want to change ONE of those effects in multiple clips without disturbing the rest of the effects in those clips.

  • How to apply an effect to multiple/all clips

    I'm sure I'm missing something elementary here, but I can't find a way to apply an effect to multiple clips at once in PE7.  Specifically I'd like to apply the Auto Levels adjustment effect across all clips in my project (makes sense because they were all recorded at the same time), but at best can onely copy the effect from one clip or section on the timeline to another; one at a time.  When working with a project that has upward of 100 scenes, copy and pasting to each individual clip seems like a lot of tedious work that should be easier.
    Does anyone have any suggestions or information that could point me in the right direction?
    Thanks!
    Dale

    Dale,
    You have discovered one of the little "gottchas" with Copy/Paste Attributes - it does it for all.
    I do not know of a way to eliminate Effects globally, i.e. multiple Clips in this case. Unless there's a neat workaround, or secret switch, I think it will be by hand. That is the way it is in PrPro. Don't know about PE, but In PrPro one can select some of the Effects to Copy/Paste Attributes (for many Effects, but not all).
    Side note: Render your Clips and watch them closely with Auto Levels. I find that it "pulses" and that manually setting Levels (not the Auto one) is better.
    Good luck,
    Hunt

  • How to apply style to multiple links?

    I'm a newbie here, so maybe this is a simplistic question.  I am having trouble applying a color style to multiple links on a webpage at the same time.  I have a page setup with a layout similar to the Drudge Report, which posts href links separated by horizontal rule lines.  I want to apply a color style to these links, but I'm finding I have to select each link individually in design mode to apply the style.  When I select multiple links in design mode, the color doesn't apply to the text.  It's time consuming to select each link individually.  I can do this easily in Microsoft Visual Web.  How can I do it in Dreamweaver?

    The best way is to put all related links into a division. 
    Let's say you want to have red links in your #header and white links in your #footer which has a black background.
    CSS, set up two sets of link styles:
    #header a {text-decoration:none}
    #header a:link {color:red}     /**unvisited**/
    #header a:visited {color:gray} /**visited**/
    #header a:hover,               /**on mouse over**/
    #header a:active,              /**on click**/
    #header a:focus                /**on tab key**/
        {text-decoration:underline}
    #footer {background: #000;}
    #footer a {text-decoration:none}
    #footer a:link {color:white}
    #footer a:visited {color:yellow}
    #footer a:hover,
    #footer a:active,
    #footer a:focus 
        {text-decoration:underline}
    HTML:
    <div id="header">
    <a href="some-link.html">Link in the header</a> |
    <a href="some-link.html">Link in the header</a> |
    <a href="some-link.html">Link in the header</a> |
    </div>
    <div  id="footer">
    <a href="some-link.html">Footer link</a> |
    <a href="some-link.html">Footer link</a> |
    <a href="some-link.html">Footer link</a> |
    </div>
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com/

  • How to change color on multiple text clips

    I just finished creating a video with a lot of moving text. It's about 40 mins long. The client wants the text color to be different in the video. My problem is I have multiple text clips (hundreds) that I need to change.
    Is there a simple short cut to do this. I love how in fcp you can use the past attributes feature to paste drop shadows and other motion elements on multiple clips. I haven't seen this option for color though.
    Thanks,
    Cody

    JCWBU38 wrote:
    Thanks Mjax4,
    That's definitely one way to do it. The only negative is having to render all of that.
    You cannot simply copy/paste the color...
    Here's another way to do it. Note: this isn't really elegant AND it's still going to require rendering - so it might not work for you. But, I guess with any 'workaround' you've got to weigh the pros & cons, though, eh?
    Anyway, you could
    1.) Put a Color Solid on the video track above one of your titles.
    2.) Set the solid's color to the exact color you want the titles to take on.
    3.) Set the solid's composite mode to "Travel Matte-alpha". (This will use the alpha info. from the text clip to cut a hole into your now-colored solid.)
    4.) Copy this clip to all the other titles, above them.
    Again, this is just another workaround...so your alternatives are:
    • Bear down and re-do all the graphics properly...time-consuming!
    • Use one of the "other" techniques and wait on a render.
    They both cost you time. But at least with rendering - you can do whatever else you want while it's happening. It's wait-time. Not WORK time. Up to you!
    Hope this helps.

  • How to remove effect presets from a clip?

    I'm learning how to use Premiere Elements 8 from Adobe's official Help document.
    I'm currently working through Chapter 10, "Applying effects", section "Working with effect presets" -> "Apply an effect preset".
    The Help document doesn't tell how to remove an effect preset you had applied.
    I've tried to follow the instructions for removing regular effects, but they don't seem to work in the case of presets.
    How can i remove effect presets from a clip?

    I suspect it's actually a standard PE terminology that i'd better get acquainted with.
    I wanted to address this part separately. Actually, "workflow" is more of a video, or at least NLE term, and is not specific to PrE.
    As for terminology, this ARTICLE might prove useful.
    As I attempt to point out, some of these terms might be applied slightly differently, depending on the exact program used. As a for instance, PrE 8 has moved all of the Export options to Share. I still write "Export/Share" in case a PrE 2 through 7 user reads it. Terms can change. Also, Avid might call one common operation by one name, and Final Cut Pro use a different one.
    For me, I had to learn some new terms. I can from a film background. Terms were changed with video. For instance, my old Fade-to-Black is now Dip-to-Black in most NLE's. First time that I typed Fade-to-Black, everyone came back with "huh???"
    I read a lot of books on general editing of both video and audio. Some authors use different programs, and though the core theories are the same, their terminology can be rooted in their program of choice.
    Also, with regards to audio, many still use a lot of the terminology from the analog days, and keep them, because analog is still part of the workflow in most productions - think of the mics, for instance. There is generally less analog left in video, unless someone needs to telecine film to digital, or transfer VHS tapes to digital. More of the total workflow is all in digital, so my old film school terms have faded.
    One of the things that I attempt to do is differentiate exaclty what I am talking about. If I type video, I mean video in general. If I type Video, I am talking about the video Assets in a Project. Notice that Assets is also capatilized, as that is a term from the NLE and is specific to all things, SFX, Video, Audio, etc. used. Sometimes I slip up. I use project to mean the whole thing, and Project to mean the setup in the NLE, that will result in either a .PREL, or .PRPROJ file from my Adobe editors. Does this make sense?
    Good luck,
    Hunt

  • How do I mark and play audio clips simultaneously without stopping playback in the source window?

    I do a lot of editing to music and I liked the function of being able to mark audio clips by tapping M while the song was playing. I was able to do this in CS4. When I upgraded to CS6 qnd I pressed the m key it would leave a marker but stop playback. Any idea how to customize this would be greatly appreciated.

    Open the file from the Project Window.

  • How Can I Login To Multiple User Accounts Simultaneously

    I am using an Intel iMac (2GHz Intel Core 2 Duo) with 1GB of memory and 10.4.11. I have Fast User Switching enabled. I restart the Mac every morning. Then I login to a second user account. While at work, I access these accounts via VNC.
    Sometimes I forget to login to the second user account. I do it from work via VNC, which sometimes causes complications.
    Does OSX support simultaneous multiple user account login? If not, is there a work-around solution such as an AppleScript? This would provide a time savings to me, as well as a convenience if I forgot to login to the second user account before leaving home.
    Thank you.
    Kurt R. Todoroff

    Seems to me, in another discussion, the simple Fast User Switching does not
    do much really fast or automatically; there are a few faster steps than having
    to log into each and every account change (even when FUS is enabled) so
    this later development sounds a little more automatic, esp over a distance.
    Is there a third party app or valid script that an do the multiple logins automatic
    after the first-run; so passwords need not be re-entered, and the screen can just
    switch over "fast" to another open account window, ready to go to work in there?
    {And not just a keyboard shortcut to save a few little steps, overall.}
    Whichever way the road turns...
    Good luck & happy computing!
    {edited}

  • How to Play iTunes and watch YouTube clip simultaneously?

    I am trying to play iTunes in the background and check in YouTube clips at the same time. itunes fades out whenever I play a clip. Anyway to play and watch at the same time? I don't mean play youtube in the backgriund either. I understand there are apps for that.

    Since youTube videos have a audio track this will take precedence over your background music. So, no you can't do this.

  • How to repeat effects?

    I began to learn After Effects a few days ago. I already know how to repeat a shape in a shape layer and how to put effects onto a shape layer. But I don't know how to repeat this effect without using expressions.
    For example: I have an shape layer and inside the content of this shape layer is a simple ellipse (with a fill). Below the ellipse path and the fill is a repeater (that repeats the ellipse). The shape layer also have a radial wipe effect. My target is that the radial wipe effect effects all repeated ellipses individually.
    I hope you can understand my problem, because English isn't my strength.

    Thank you for this fast answer. Your method effects the ellipse although individually and this effect looks very cool, but this unfortunately doesn't look like the radial wipe effect.

  • How do you add multiple effects to the same clip

    How do you had multiple effects to the same clip. I have tried for hours
    I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
    anyone please.

    Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
    Aged Movie should already have a bit of a sepia tone.
    If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
    Note: Thanks to Jeff Carlson of MacWorld for this tip.
    If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
    If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

  • How do I add a video effect to multiple clips in my timeline at once?

    How do I add a video effect to multiple clips in my timeline at once?

    or... you can command click to select all the clips you want to apply the effect to, then double click the effect in the Effects browser. (PS - you can't simply drag and drop an effect on multiple clip selections, the effect will only be applied to the clip you drop it on -- but double clicking the effect will apply it to all selected clips at once.)

  • How to link multiple audio clip to one video?

    I have multiple audio clips in the timeline but I can't link them all to a video in the timeline.
    The "Clip" -> "Link" option is only enabled if I select a single audio clip.
    Video:
    http://www.bartelsmedia.com/vid/tmp_premiere_question4.swf
    Could anybody help, please?

    See
    Group clips in the Premiere Pro Help.
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

Maybe you are looking for