How to put equipment no. in Asset master data  (manulaly)

Hi Guru
     I have implement Asset module and link asset no. to equipment no. come from  Plant maintenance module. How I can put the equipment no. in field  equipment number / Tab Allocations  in Asset master data .  How I can do?
thank you very much

Hi
You must have selected 'No synchronize' in Asset accounting for automatic equipment creation view-Specify Conditions for Synchronization of Master Data.
If you wish to assign equipment to Asset after creation of equipment that means you have equipment number with you which is not assigned to any of the Asset and now you want to assign this to Asset master .
Please go to IE02 and go to Organisation tab, here you need to assign your desired asset and save it.
Now go to As03 and see allocation tab, you will find the assigned equipment number here.
If you wish to let system assign equipment number automatically then please the settings in SPRO Asset accountingMasterdata - Specify Conditions for Synchronization of Master Data-Specify Conditions for Synchronization of Master Data to direct synchronization after savings, then you will not be required to assign equipment number manually, as soon as you will create an asset it will create equipment master as well for that asset and you can see in allocation tab, you can also deleat an equipment master if you don't want to create equipment master for a particular asset before saving the asset record.
Cheers
Mukta

Similar Messages

  • How to add new fields in asset master data

    Hello,
    i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
    Thanks.
    Pedro

    Hi Pedro,
    SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
    You can configure them @ the following 3 nodes in IMG:
    Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
    Regards,
    Vishal Thakur

  • How to include depreciation are in  asset master data

    I have already activated depreciation area in the asset class but it did not appear inn asset master data.
    How to include it there?
    Tks,
    Naej

    Hi,
    There are 2 aspect which you need to consider.
    1) For exisiting asset as  used AFBN as suggested by Srinivasa to activate the depreciation area.
    2) For new asset OAYZ configuation would populate the dep key and life.
    Thanks
    Vaibhav
    Edited by: vaibhav patil on Apr 22, 2010 10:40 PM

  • How to use WBS element in Asset master data upload

    Dear All
    Does any body know how to treat field WBS element in Asset master during upload.
    Field POSNR in table ANLA is of 8 characters, but WBS element which is entered in asst master is more than 8 char.
    I vaguely remember tht with wbs system internally assign a different number.
    Has anybody come across this issue?
    Please help
    Thanks
    Sanjeev

    There are in the asset 2 fields for PS
    One is filled when you do an settlement from an WBS (is not possible to fill in)
    The other one you found in the the tab time dependend like cost center.
    This field is available when you have assign the possibilety to do depreciation to an WBS.
    Paul

  • How to change cost center in asset master data through mass changes

    Hi sap gurus,
    Hi i have 20 assets i have to change the cost center through mass changes provide the solution.
    regards,
    ramanjaneyulu.

    Hi,
    For 20 assets it won't be useful to write a CATT or LSMW. So, either enter it manually or you could correct directly in the tables (ANLZ), though it's generally not recommended.
    Regards,
    Eli

  • How to activate fields under origin tab in the asset master data

    Hello Gururs,
        While creating asset master data under origin tab there are two fields in display mode . I am unable to change these fields . the fields are 1.) Asset purchase new.   2.) Purchase used. I want to check one of these two check boxes. But they are in display mode. How can i activate these two fields.
    In asset master data screen layout also i didnot find these two fields under origin category . Pls advice
    regds
    Ramachandra

    Hello Markus ,
    Thanks for your reply. I checked through Group box info then system is showing the following message .
    status - DISPLAY
    Reason - Authorization for asset view used
      In screen layout field i didnt find these two fields . Can you tell me where these settings has been done . How to change the status for these fields.
    regds
    ramachandra

  • EQUIPMENT ASSIGNMENT TO ASSET MASTER RECORD

    Hi All:
    I am trying to assign the Equipment Number in the Asset Master Record but am not able to do so. Is it even possible, has anyone had any success with the configurations and can share them with me?
    I know that I can create the Equipment Number automatically when creating the Asset Master but what I need to do is to assign an existing Equipment Number to an existing or new Asset Master & the asset number will be reflected on the Equipment Master.
    Thanks and Regards
    Hisham

    What is the problem now?  Aren't you able to assign the Equipment number in the Asset master data?
    What is the error message?
    Well, just try this and see whether it works for you or not.
    IMG -> Asset Accounting ->  Master Data -> Automatic Creation of Equipment Master Records -> Specify Conditions for Synchronization of Master Data

  • How to display field Functional Location Field in Asset Master Data

    Dear Experts,
    I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
    I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
    I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
    Thank you
    Best regards,
    Frans

    Dear Frans,
    I am sorry this is not possible.
    Note 140482:
    The field was created as a precaution. However, it is not being used at 
    present and consequently is not supplied.                               
    In particular, you cannot use the field as a criterion for a selection  
    in Asset Accounting reporting. This is still true even if this field has
    been included in the selection view delivered for the dynamic selections
    by modification.                                                        
    regards Bernhard

  • How to change cost center in Asset Master record ?

    Hi SAP Gurus,
    My client is asking me to change cost centers in Asset Master records using LSMW. Currently, the field cost center is in display mode. In order to change the cost center, the field cost center must be in change mode while recording in LSMW. I have changed screen layout rule for Asset Master data. I have selected radio button "Optional" for cost center in screen layout for Asset Master data. But still cost center field is in display mode in Asset Master record. It must be changeable.
    Please suggest me how I can resolve the issue.
    Regards,
    K.S.K

    Hi Saravana,
    We can change the cost center for AuC Investment measure at WBS element level. For that purpose we need to go to AuC Investment measure Asset master record and check WBS element under Origin Tab. Double click on WBSE and then check the cost center under Assignment tab. And also check the cost center in Asset master record for the same. Now you can go to T.Code CJ12 (Change WBS Element) and change the cost center for the same. Once you make changes system automatically change the cost center in asset master record for the same.
    Note: - Now you have to identify all the AuC Investment measure Assets and the WBS Element for the same. Then change the cost center in WBS Element record. And the corresponding changes will be done in relevant Asset master record automatically.
    But before making the change please check with the PS/PM consultant regarding changes in WBS element. Means where it will effect?
    With Regards
    Ravinder Kaushik

  • How to update the New Depreciation Area in Asset Master Data

    Hi,
    Please guide me
    How to update the New Depreciation Area in the Asset Master Data.
    Regards
    Srinivas

    Hi,
    a) The procedure is as follows:
    1. Create Depreciation area via OADB.                                                                               
    2. Activate Depreciation area via OAYZ.                                                                               
    3. Automatic opening of new depreciation are via AFBN and program  
       RAFABNEW :                                                                               
    3.1     Indicator: Leave values initial = not ticked.           
               Do not set this indicator if you want the system        
               to copy the values from depreciation area 01.                                                                               
    3.2     Indicator: Leave values initial = ticked.               
               Set this indicator if you want to open the newly created
               depreciation area without any values i.e. blank.                                                                               
    4. Recalculate depreciation via AFAR and program RAAFAR00.   
    b) Helpful notes:
    430618 (Procedure for setting up new depreciation area)                           
    301113 (Restrictions of RAFABNEW)                                                 
    421549  (RAFABNEW: Error with closed fiscal years)
    c) A documenttation you find if you enter RAFABNEW in SE38 and press the butto "documentation"
    regards Bernhard

  • How to validate a field in Asset master?

    Hi,
    I have requirement like need to validate field ANLA-TYPBZ,
    Data uniquely passing to this field, i need to check whether data already exist or not while creating asset master using AS01 transaction.
    eg: suppose ANLA-TYPBZ = 12345' entry is there in the table, if i tried to post the data using AS01 as '12345', it should give error message.
    Thanks.

    hi,
    Follow the below steps:
    1. create a validation in GGB0 at node Assets - > Master Data
    2. create a routine in program where these validations were written. It is a copy from RGGBR000
    3. activate validation: append a record in transaction OACV
    http://wiki.sdn.sap.com/wiki/display/ERPFI/Validations
    Regards
    Alok
    Edited by: alpatr on Nov 21, 2011 8:12 AM

  • ABUMN - how to bring "Internal Order" from Asset Master to Asset Account

    Dear All ,
    I have maintained the I/O of the Asset Master . If I did OAYR , the I/O value of the Asset Master could  be brought to Depreciation Account automatically when running AFAB.  But when I run ABUMN (and ABAVN), the system could not bring the I/O of the Asset Master to Asset Account .
    Do you kindly tell me that which config could achieve the my purpose ??
    And if I could do it by any configuration , do you have any suggestion to do that ??
    User Exit ? or others ??
    Many Thanks !
    Ian

    HI,
    You will have to maintain Screen layout in Asset acounting-master data-screen layout-define for asset master data
    here goto time dependent data for the asset class.Make plant as a required entry here & save.
    Regards,
    Saurabh

  • Validation user exit at asset master data

    hi all,
    at asset master data creation level, if you want to validate company code vs asset class vs equipment type, how do you define validation user exit? Also, we have so many company codes. Do we have to individually validate rules for each and every company code?
    Regards,
    Rob

    Hope the below user exits are useful:
    AAPM0001 |Integration of asset accounting and plant maintenance
    AINT0001 |Extended checks when posting an asset   
    AIST0002 |Customer fields in asset master
    Pls assign points as wa to say thanks

  • About settlement, asset master data's amount column value

    Dear Experts,
    I  build an aseet master data :   A (the amount column's value is 0 in asset master data)
    Then, I build an asset purchase order  assign to A , after I  do GR,  A's amount column's value change to 1.
    But if as follows,
    I  build two asset master data :  B and C ,
    B's asset catalog is 167200(prepay for equipment) , c's asset catalog is 153100 (normal fixed asset)
    Then , I build an asset purchase order assign to B, then do GR , B has amount 1, and then ,
    I  do t-code: AIAB , settlement B to C , I found B's amount column's value still show 1 , and C is still 0 ,
    but the asset value certainly has transfer  from B to C......
    why B's amount column's value doesn't be changed?
    I can't figured out.
    Thanks a lot in advance.
    Best Regards,
    Yacoa
    Edited by: Yacoa Chen on Mar 15, 2011 9:14 AM

    Hi
    If B is still showing value - It means values are not settled
    After AIAB - You need to run AIBU to settle the values.. Did you run AIBU??
    Br, Ajay M

  • Attaching document in the Asset master data

    Hi All,
    If want to attach the supporting document in asset master data, i.e in AS02, AS03 what are the steps that we need to follow to implement this  in SAP?
    Also while doing asset transfer, how can we transfer the attached documents?
    Please provide inputs.
    Regards,
    Jayasudha

    Hi ,
    Below is the configuration steps
    Have defined a content repository (IMG activity Maintain Content Repositories, transaction OAC0)
    · Have maintained document types with the status "active" (IMG activity Maintain document types, transaction OAC2).
    · Have defined Relationships for your object type with the status "active" (IMG activity Maintain relationships transaction OAC3)
    Procedure
    Then if you check the service object in AS02 it will be in active status.
    Regards,
    Jayasudha

Maybe you are looking for