How to put Guage Meters in Visula composer & what is the significance

Hi ALL,
I am new to VC . So I want to Know what is the significance of Gauge meters & How we have to put in Iview .
Please provide me steps to use Gauge meter.
Reward the points
Thanks&Regard,
kiran.

Hi Kiran,
Refer the following link.It ll be useful
<a href="/people/abesh.bhattacharjee/blog/2007/02/27/get-started-with-dynamic-graphics-in-xmii-115">/people/abesh.bhattacharjee/blog/2007/02/27/get-started-with-dynamic-graphics-in-xmii-115</a>
<a href="Regarding dynamic graphics://Regarding dynamic graphics
Regards,
Hemalatha
/Assign points if helpful/

Similar Messages

How to put two pictures side by side without loosing the size?

how to put two pictures side by side without loosing the size? I did create a new canvas and double the size but my pictures are smaller in the new canvas please help meeeeeeee!!! my pictures are High13.6 and wide 20.533 with a resolution 240 im working on photoshop cs3 or cs6

Are you trying to print two pictures on the same sheet of paper? If so, then use Picture Package in CS3 (it is not part of CS6 unfortunately)
http://voices.yahoo.com/using-adobe-photoshop-picture-package-great-digital-614329.html

When I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

when I see the usage on my iPod touch 4 they have categories for how much space is being used where. What does the "other" category contain? Like what could I delete on my iPod to get rid of the "other" category?

What is the Other on my iPhone and How to Remove It
An "other" larger than about 1 1/2 GB usually indicates that the "other" includes corrupted files.
First try:
"First you go settings/general/usage/music/then left swipe over music and press delete and you would think it deletes your music but it doesn't instead it deletes your other but make sure your ipod is connected to a computer while doing this"
as recommended by:
How do I get rid of "other" storage: Apple Support Communities
Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
To restore from backup see:
iOS: How to back up
To restore to factory settings/new iPod see:
iTunes: Restoring iOS software

How to maintain decimal places in BOM Qty & what is the essence of base qty

Hello PP members
How to maintain decimal places in BOM Qty & what is the essence of base quantity in BOM ?
Thank You

ur first question is not understood, You can have maximum of 3 decimals in BOM item qty.
Base qty is the qty which is refered to all the BOM items.
example -
Product X, base qty 1
Raw material 1 - componen t qty= 1
Raw material 2 - Component qty= 5
This means To produce Product with qty1, it needs raw material 1 qty 1 and raw material 2 qty 5.
This means To produce Product with qty10, it needs raw material 1 qty 10 and raw material 2 qty 50.
This is the meaning of Base qty..it is the referece qty refered to all the components.
About the decimal places
let us say example 2
To produce Product with qty1, it needs raw material 1 qty 1 and raw material 2 qty .0001.
When you enter this in SAP for the raw materialm 2 system will give error message that you need to enter the qty with maximum 3 decimal places, hence you need to enter as below
Product with qty10, it needs raw material 1 qty 10 and raw material 2 qty .001.
This is how you need to adjsut the base qty and component qty with decimalplaces moer than 3,
pl come back

How to install owa in iphone 4s? what are the detailed procedures to proceed?

How to install owa in iphone 4s? what are the detailed procedures to proceed? Can you help on this? Thanks

You don't need to install OWA on your iPhone. It needs to be enabled by your email provider - presumably your employer? They should also be able to provide you with detailed instructions on how to access your email remotely using your iPhone.

How does QoS work with WAAS WCCP? What's the interaction between QoS Traffic Classification and WAE Traffic Application Policy?

How does QoS work with WAAS WCCP? What's the interaction between Router QoS Traffic Classification and WAE Traffic Application Policy?

By default, WAAS preserves the DSCP marking on intercepted packets. There is a configuration option to set/override the DSCP value at the global (device), application, and classifier levels. Currently WAAS provides marking only. There is no action taken by WAAS based on the DSCP value.
Regards,
Zach

How , When and What is the significance of Business Partner's Sales Area Data?

Dear All,
What is the Sales Area data of busines partner , What is the significance of the same?
When it gets modified or extended?
How to maintain its configuration? How maintain its data!!
Hence i want to understand almost all about sales Area data of business partner.
Regards,
Dhruvin
Moderated: Please use the search before posting.
Message was edited by: Andrei Vishnevsky

Hello Dhruvin,
I think you shall have a look on the current help about this issue as it is a Complex ssue meaning "extense" and also one of the basic Points on the customizing and deployment of a CRM System:
Organizational Management in SAP CRM - SAP Library
Basically the Sales Area Data identifies your BP in your Sales Organization.
You define your sales organization so its fits your business requirements and real structure. f
Having this information properly defined helps to link data between SD and CRM so you can have for example: - The proper price for a customer when creating and Oportunity/ Sales Order.
- To restrict the access of the information of an employee.
Hope these hints help..
Regards

How do I import DVD to IMovie? What is the best way to import DVD to a Mac?

Hi everyone!
I need some help, so here are my questions.
How do I import DVD to IMovie? What is the best way to import DVDs to a Mac?
I would like to keep the original quality from the DVD.
Thx.

You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.
Another possibility is to use DVDxDV:
http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
which costs $25.
For the benefit of others who may read this thread:
Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

How to put Final Invoice flag in PO and close the PO automatically

Hi guys,
How to put automatically final invoice flag in PO and close PO automatically by system.
Regards
Jagadesh

Use of Final invoice indicator as follows
The final invoice indicator serves as information for the applications
    - Cash Management and Forecast
    - Cash Budget Management
    - Funds Management
If you set the final invoice indicator, purchase order commitments are
reset.
However, the final invoice indicator does not prevent further invoices
from being posted. Furthermore, it does not replace GR/IR account
maintenance in the event of a variance between GR quantity and invoice
quantity.
Automatic closing PO only possible if use ME59N to create the PO from Req other wise you have to do manually

How to put address in contacts so it works in the ...

Any tricks, how to put addresses in the address in contacts in the phone book. No matter what I try I always get the message: No results found offline.
- If you have downloaded the country map, you shouldn't need to be online !
I can see some of my contacts on map, If I take out the zip code in the address !

Hi hi, I only want to use existing address in contacts in phone book.
I did some long tests last night. And the results are these: I have to delete the post code from every single contacts, without postcode I can easily use the address for the gps in N8 ! Its a bit strange. If Im not clear enough, I want to be able to drive to contacts in phone book.
Would be interested to see if I´m the only one with this problem (because I have some more problems and they might be the phone I got), barcode scanner, contacts from exchange and now this.

How to put a footer text in every page of the application

How to put footer text in every page of the application without putting it page by page.
Thanks.
Jen

Patick,
Thanks for your reply.
I still don't know how to do it.
1. Have a look at the documentation for Page 0.
There is no Page 0 in my application
2. You can add your custom stuff to your page templates.
Could you give me more detail on this?
Thanks,
Jen

How to install Oracle 10g on RHEL5 and what are the prerequisite

Hi All,
I want to install Oracle10g on RHEL5. I have installed RHEL5 now i have to install Oracle 10g on that. How can i do that?
What are the prerequisites to do so? Please tell me step by step
Arif

please follow :
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
http://asanga-pradeep.blogspot.com/2009/06/oracle10gr2-on-rhel-5oel-5-x8664.html
RPM packages
Regards
Rajesh

What is the significance of Form routines while cretaing the out put types.

Hi All
while creating the output types in NACE what the significance of Form routines. What exactly in will do.
please clarify in detail
Arjun

The FORM routines are important in configuration, because this is how the form print program will be called. Usually the internal code is something like this.
perform <routine> in program <print_program> using xscreen rcode.
So in your print program, you need an ENTRY routine, so that the caller can call this routine. The ENTRY will be the beginning of the program and call other FORMs which print the document.
Regards,
Rich Heilman

HT2731 how do i pay for a new account, what is the cost

what is the cost of itunes? How is the account paid?

what is the cost of itunes?
If you are asking about iTunes the program, it is a free download from apple.com.
Songs in the iTunes Store mostly cost 99 cents or $1.29 each. (Those are USA prices; other country iTunes Stores have their own price structure.) Other content such as apps and movies is also available, with the price clearly marked.
You can also use iTunes with your own MP3s or with songs purchased from other sources.
How is the account paid?
Either by credit card or gift card.

How to put check box in a table format at the out put ? Urgent issue...

Hi,
I am working an assignment to assign multiple roles for multiplr user.
In selection screen we have to enter mutiple EMPNO from ..to
1) in second screen we will get the empno, First name, last name, Position,
    From date, To date, Sap user ID, Email id in the table formate with first
    column with Check box.
2) In second screen below the table I have to place the multiple roles just like in
   the step loop format and below this one Execute button should be there.
If we select the multiple employees or single employee and place the multiple roles or single roles and if I click the execute button then the multiple roles will be assigned to the multiple employees. The empno and roles will come from table and step loop to internal table and the same will pass to the BDC.
For this requirement I prepered recording for Transaction PFCG. But I can't understand how to design the second screen that table format and the step loop format. Can anybody give any idea or any coding to design the second screen.
and how to meet the requirement. This is urgent issue. Good SDN points will be reworded.
Witing for kind response.
Thanks in advance.
Bansidhar

Hi upendra
There are slight changes in the sivas code.Where is the data coming into the table.If its from a Model Node then iterate each element of the source node get that value compare and set the corresponding value in the element of the node binded to table.
Create a boolean attribute "select" in the table node and bind it to checked property of the check box.
for(int i=0;i<wdContext.node<tablenode>()..size();i++)
if(wdContext.node<tablenode>().get<tablenode>ElementAt(i).select())
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(true);
else
wdContext.node<tablenode>().get<tablenode>ElementAt(i).set<yourattribute>(false);
See the attribute is boolean so pass true or false as a values in setter methods.
Regards
Kalyan

How to put Guage Meters in Visula composer & what is the significance

Similar Messages

Maybe you are looking for