How to put in CR/LF into Formula Column?

I have a formula column that finds names. How can I form it so I can display in a field that looks as...
Name1
Name2
Name3
Thanks,
DC

Hello,
Just add CHR(10) between the values of the fields ..
Regards

Similar Messages

How to put the alv output into the spool request?

Hi guys,
How to put the alv output into the spool request?
Thanks!

Hi
Sending an ALV List screen output to SPOOL
Convert ALV list to PDF and send mails to respective persons
Regards
Pavan

How to put IPOD Shuffle I into Disk Mode ?

How to put Ipod Shuffle I into diskmode ?

When connected, in iTunes click on shuffle icon in Devices, then click on Settings tab. Scroll down and click the square in front of "Enable disk use", the adjust slider for amount of flash memory to reserve for data. Click Apply, and you're done!
When you use iPod shuffle as a disk, the status light on the front of iPod shuffle blinks orange continuously, and the iPod shuffle disk icon appears on the desktop on the Mac, or as the next available drive letter in Windows Explorer on a Windows PC. Drag files to and from iPod shuffle to copy them.
Ejecting iPod shuffle Important: If the iPod shuffle status light is blinking orange, you must eject iPod shuffle before disconnecting it from your computer. If you don’t eject iPod shuffle before disconnecting it, you could damage files on iPod shuffle.
To eject iPod shuffle:
Click the Eject (C ) button next to iPod shuffle in the iTunes Source list. If you’re using a Mac, you can also eject iPod shuffle by dragging the iPod shuffle icon on the desktop to the Trash.
If you’re using a Windows PC, you can eject iPod shuffle by clicking the Safely Remove Hardware icon in the Windows system tray and selecting your iPod shuffle.

I loaded my ipad photos from camera and all the pictures sorted by date. Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files?

I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?

What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN

How do I look up how to put Cafe townsend tutorial into dreamweaver

How do I ask how to put Cafe Townsend Tutorial into dreamweaver. I have a mac. The tutorial notes say follow this line
(Mac OS X) Macintosh HD/Users/your_user_name/Documents/local_site. I don't understand what each section means. If someone called explain it that would be great as I ended up with an empty folder in dreamweaver with the name 'Cafe Townsend' on it. Thank you

Right. It's an empty local site folder until you put something into it.
Go to step 2. Download and unzip the Check_Magazine.Zip files
http://download.macromedia.com/pub/developer/check_magazine.zip
Go to step 3. Copy the check_magazine folder into your local_sites folder (Cafe Townsend).
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.com/blogspot.com

Putting a .pdf file into a column in an oracle table

I have created a table with one column as a blob so I can put 4800 .pdf files into that column of a table. Can anyone correct the ways I am trying to do this or let me know of a better way. I have tried several ways and have not been successful. Thanks.
Here are the two ways I have tried that haven't worked.
-- the storage table for the image file
CREATE TABLE pdm (
dname VARCHAR2(30), -- directory name
sname VARCHAR2(30), -- subdirectory name
fname VARCHAR2(30), -- file name
iblob BLOB); -- image file
-- create the procedure to load the file
CREATE OR REPLACE PROCEDURE load_file (
pdname VARCHAR2,
psname VARCHAR2,
pfname VARCHAR2) IS
src_file BFILE;
dst_file BLOB;
lgh_file BINARY_INTEGER;
BEGIN
src_file := bfilename('O:\twilliams\DD_promotion\cards\', pfname);
-- insert a NULL record to lock
INSERT INTO pdm
(dname, sname, fname, iblob)
VALUES
(pdname, psname, pfname, EMPTY_BLOB())
RETURNING iblob INTO dst_file;
-- lock record
SELECT iblob
INTO dst_file
FROM pdm
WHERE dname = pdname
AND sname = psname
AND fname = pfname
FOR UPDATE;
-- open the file
dbms_lob.fileopen(src_file, dbms_lob.file_readonly);
-- determine length
lgh_file := dbms_lob.getlength(src_file);
-- read the file
dbms_lob.loadfromfile(dst_file, src_file, lgh_file);
-- update the blob field
UPDATE pdm
SET iblob = dst_file
WHERE dname = pdname
AND sname = psname
AND fname = pfname;
-- close file
dbms_lob.fileclose(src_file);
END load_file;
This one I get an error message on this statements:(dbms_lob.LOADBLOBFROMFILE(blob_loc,bfile_loc,dbms_l ob.lobmaxsize,bfile_offset,
blob_offset) ; )
DECLARE
bfile_loc BFILE;
blob_loc BLOB;
bfile_offset NUMBER := 1;
blob_offset NUMBER := 1;
tot_len INTEGER;
BEGIN
/*-- First INSERT a row with an empty blob */
INSERT INTO blob_tab VALUES (5, EMPTY_BLOB());
COMMIT;
/*-- SELECT the blob locator FOR UPDATE */
SELECT blob_data INTO blob_loc FROM blob_tab
WHERE id = 5 FOR UPDATE;
/*- Obtain the BFILE locator */
bfile_loc := bfilename('O:\twilliams\DD_promotion\cards\','00EAL.pdf');
/*-- Open the input BFILE */
dbms_lob.fileopen(bfile_loc, dbms_lob.file_readonly);
/*-- Open the BLOB */
dbms_lob.OPEN(blob_loc, dbms_lob.lob_readwrite);
/*-- Populate the blob with the whole bfile data */
dbms_lob.LOADBLOBFROMFILE(blob_loc,bfile_loc,dbms_l ob.lobmaxsize,bfile_offset,
blob_offset) ;
/*-- Obtain length of the populated BLOB */
tot_len := DBMS_LOB.GETLENGTH(blob_loc);
/*-- Close the BLOB */
dbms_lob.close(blob_loc);
/*-- Close the BFILE */
dbms_lob.fileclose(bfile_loc);
COMMIT;
/*-- Display the length of the BLOB */
DBMS_OUTPUT.PUT_LINE('The length of the BLOB after population is: '||
TO_CHAR(tot_len));
END ;
/

CREATE TABLE test_blob (
id NUMBER(15)
, file_name VARCHAR2(1000)
, image BLOB
, timestamp DATE
CREATE OR REPLACE DIRECTORY
EXAMPLE_LOB_DIR
AS
'O:\twilliams\DD_promotion\cards\'
CREATE OR REPLACE PROCEDURE Load_BLOB_from_file_image
AS
dest_loc BLOB;
src_loc BFILE := BFILENAME('EXAMPLE_LOB_DIR', '009-1395.pdf');
BEGIN
INSERT INTO test_blob (id, file_name, image, timestamp)
VALUES (1001, '009-1395.pdf', empty_blob(), sysdate)
RETURNING image INTO dest_loc;
DBMS_LOB.OPEN(src_loc, DBMS_LOB.LOB_READONLY);
DBMS_LOB.OPEN(dest_loc, DBMS_LOB.LOB_READWRITE);
DBMS_LOB.LOADFROMFILE(
dest_lob => dest_loc
, src_lob => src_loc
, amount => DBMS_LOB.getLength(src_loc));
DBMS_LOB.CLOSE(dest_loc);
DBMS_LOB.CLOSE(src_loc);
COMMIT;
END;
I am getting this error when I exec load_blob_from_file_image.
ERROR at line 1:
ORA-00972: identifier is too long
ORA-06512: at "SYS.DBMS_LOB", line 716
ORA-06512: at "DRAWING.LOADBLOBFROMFILEIMAGE", line 15
ORA-06512: at line 1
any ideas why?

How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

Hi guys,
Previously I have had no issues simply using Adobe Audition 3 for simple stereo recording and editing of a stereo feed taken from a mixer... well nearly no issues.... :-)
Today, I'm having a bad day or else it's because I'm getting used to being retired.. :-) ......
Query : How do I put two mono tracks into the usual stereo view in Edit view so they both display correctly there?
Put simply I have two mono wav files. Let's call them Left_wav and Right_wav.
I cannot seem to get them imported into a new clean Edit view (Normal stereo track layout) so that Left_wav is on the top half and Right_wav is on the bottom half.
Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. i.e. it just shows one track.
Can anyone familiar with Audition 3 kindly help? I'd appreciate a simple step by step... I just can't see where I've been going wrong, and it's driving me bananas :-).
Thanks

There are various ways to do this in Audition 3. here's one.
Open both mono files separately in Edit view. Then convert Left_wav to Stereo by going to Edit/Convert Sample Type and under Channels select Stereo with Left Mix at 100% and Right Mix at 0%. This will give you a new stereo file with Left_wav on the top channel. Next go to the Right_wav and copy to the clipboard using Edit/Copy. Return to your new stereo file and enable Edit Right channel only in Edit/Edit Channel/Edit Right Channel. Then make sure that the cursor is at start of the stereo file and Paste Right_wav into the bottom channel of the new stereo file. Finally Save As.

Can u tell me how i put my own dvds into itunes so i can put them onto my iphone4 myself as i have got 100s

hi there i want to no how i put dvds into itunes so i can put them onto my iphone4 myself as i have got 1000s cheers

Since you are referring to commercial DVDs, they are all encrypted to prevent copying. In the US (and other places) it violates the law to use software to bypass encryption, so the Terms of Use here prohibit discussions on how to accomplish this. You might want to consider using a search engine instead.

How do put a quicktime movie into a slide show

I can't figure out how to put a movie into a slide show. I changed the format to mpeg and wmv and still doesn't like it.

Using what slide-show software?

How to put finder icon back into the dock?

does anyone know how to put the finder icon back into the dock because that icon just disappeared and i have no idea how to put it back in. thank you so much if you know how!
iBook 12-inch G4 Mac OS X (10.4.6)

lamfishy,
Welcome to Apple Discussions.
Find the com.apple.dock.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
;~)

How to put a kernel badi into a sap program

I'm trying to put a kernel Badi into a Sap standard program, but I don't know how to put it.
I'm thinking to put it inside a user exits?

Check this
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f02f5459-7c76-2b10-54b4-f95e5f75476b

How to put a jsp variable into a javascript function?

Please read the following coding. I want to pass the variable ans from jsp to the function check_answer() of javascript. ans is a string got from database. But I cannot put the variable ans into the Javascript function. Can anyone help?
<script language="Javascript">
function check_answer() {
if (testing.result.value==ans ){
window.alert("You have got 10 marks.");
</script>
<body>
<form name="testing"...>
<%
ResultSet rs = stmt.executeQuery("select * from level where...");
while(rs.next())
out.println("<tr>");
out.println("<td>" + rs.getString("question") + "</td>");
ans = rs.getString("answer");
out.println("</tr>");
out.println("<input type='text' name='result'>);
out.println("<input type='button' value='Enter' onclick='check_answer()'>");
%>

The following should be able to pass ans.
<script language="Javascript">
function check_answer(ans) {
if (testing.result.value==ans ){
window.alert("You have got 10 marks.");
</script>
<body>
<form name="testing"...>
<%
ResultSet rs = stmt.executeQuery("select * from level where...");
while(rs.next())
out.println("<tr>");
out.println("<td>" + rs.getString("question") + "</td>");
ans = rs.getString("answer");
out.println("</tr>");
out.println("<input type='text' name='result'>);
out.println("<input type='button' value='Enter' onclick='check_answer('<%= ans%>')'>");
%>jag

How to put a Java Program into the System tray

Hi all of the forum!!
I have a question. I want to make a monitor program but I don't know how to put the program in the system tray or just to execute the program but automatically (no manual execute), but i dont want that the program appear in a window, just start to function when i start my PC. i hope anybody help me.
Thanks
Best Regards
Bucio, Francisco

There is a plenty of similar topics here, so you can use the Search on this forum or in Google to find out.
But shortly, you will need to use JNI or get a ready-to-use library like JNIWrapper (http://www.jniwrapper.com/winpack.jsp#tray), for example, that lets you do what you want.
Good luck,
EToporov

How to read/write .CSV file into CLOB column in a table of Oracle 10g

I have a requirement which is nothing but a table has two column
create table emp_data (empid number, report clob)
Here REPORT column is CLOB data type which used to load the data from the .csv file.
The requirement here is
1) How to load data from .CSV file into CLOB column along with empid using DBMS_lob utility
2) How to read report columns which should return all the columns present in the .CSV file (dynamically because every csv file may have different number of columns) along with the primariy key empid).
eg: empid report_field1 report_field2
1 x y
Any help would be appreciated.

If I understand you right, you want each row in your table to contain an emp_id and the complete text of a multi-record .csv file.
It's not clear how you relate emp_id to the appropriate file to be read. Is the emp_id stored in the csv file?
To read the file, you can use functions from [UTL_FILE|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#BABGGEDF] (as long as the file is in a directory accessible to the Oracle server):
declare
    lt_report_clob CLOB;
    l_max_line_length integer := 1024;   -- set as high as the longest line in your file
    l_infile UTL_FILE.file_type;
    l_buffer varchar2(1024);
    l_emp_id report_table.emp_id%type := 123; -- not clear where emp_id comes from
    l_filename varchar2(200) := 'my_file_name.csv';   -- get this from somewhere
begin
   -- open the file; we assume an Oracle directory has already been created
    l_infile := utl_file.fopen('CSV_DIRECTORY', l_filename, 'r', l_max_line_length);
    -- initialise the empty clob
    dbms_lob.createtemporary(lt_report_clob, TRUE, DBMS_LOB.session);
    loop
      begin
         utl_file.get_line(l_infile, l_buffer);
         dbms_lob.append(lt_report_clob, l_buffer);
      exception
         when no_data_found then
             exit;
      end;
    end loop;
    insert into report_table (emp_id, report)
    values (l_emp_id, lt_report_clob);
    -- free the temporary lob
    dbms_lob.freetemporary(lt_report_clob);
   -- close the file
   UTL_FILE.fclose(l_infile);
end;This simple line-by-line approach is easy to understand, and gives you an opportunity (if you want) to take each line in the file and transform it (for example, you could transform it into a nested table, or into XML). However it can be rather slow if there are many records in the csv file - the lob_append operation is not particularly efficient. I was able to improve the efficiency by caching the lines in a VARCHAR2 up to a maximum cache size, and only then appending to the LOB - see [three posts on my blog|http://preferisco.blogspot.com/search/label/lob].
There is at least one other possibility:
- you could use [DBMS_LOB.loadclobfromfile|http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_lob.htm#i998978]. I've not tried this before myself, but I think the procedure is described [here in the 9i docs|http://download.oracle.com/docs/cd/B10501_01/appdev.920/a96591/adl12bfl.htm#879711]. This is likely to be faster than UTL_FILE (because it is all happening in the underlying DBMS_LOB package, possibly in a native way).
That's all for now. I haven't yet answered your question on how to report data back out of the CLOB. I would like to know how you associate employees with files; what happens if there is > 1 file per employee, etc.
HTH
Regards Nigel
Edited by: nthomas on Mar 2, 2009 11:22 AM - don't forget to fclose the file...

How to put the proper header at each column in write to measurement file (.lvm) ?

Hi,
i would like to know one thing about the write to measurement file. Can i put the proper header at each column in write to measurement file (.lvm) ? and how can i do for it ? Could you show me a way to make it ?
i am looking forward your kindly reply.
thank you so much ..
best regard,
roxy

Hi Mike,
Thank you very much for your help. It works .
By the way, i would like to ask you about setting time interval. In the pic, X_Value column is for time column
i would like to ask that when i use the write to measurement file, there got the x column that show time inside the excel file. In this column, i would like to set the time interval at every 210ms .The data may come in every msec but i just want to record the data at every 210ms . for example, 210ms-420ms-630ms ..etc. how can i set it ?
One more thing .. can i do it in graph as well ?
i am looking forward your kindly reply.
Thank you for your time.
Best Regard,
Roxy

How to put in CR/LF into Formula Column?

Similar Messages

Maybe you are looking for