How to put own mid. file into N5300 Flying Finger ...

I always get this message: access denied!

Which camera are the camera raw files from?
If your able to open the files in the camera raw dialog, then after you done adjusting the image, press the Open button and in the pse 11 editor go to File>Save As>Jpeg

Similar Messages

  • How to put an HTML file into JEditorPane

    Hi
    I am doing an aplication on swing.But I don't know how to add a html file to the JeditorPane keeping the html file on the source code. i.e my html file is in my source code.Then how to add this source code to Jeditor pane.
    Thanks
    Srikant

    hi srikkant,
    ur html code is inside the source code..? are you working on applets..? if ur html file can be read as a file and the file stream can converted to a string and put into a Jeditor pane using the setText() method. for editing HTML text a editor called javax.swing.text.html.HTMLEditorKit can be used.
    Refer to JAVA API for further clarifiactions and examples.

  • I loaded my ipad photos from camera and all the pictures sorted by date.  Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence.  Any idea how to put the photos back into date files?

    I loaded my ipad photos from camera and all the pictures sorted by date.  I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence.  Any idea how to put the photos back into date files other than reloading all of them from camera?

    What version of iPhoto?
    Select one and rotate it. Then rotate it back. Does that make it appear? 
    A much better work flow is the keep the photos after importing.  Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
    LN

  • How can i stop the Action Wizard from putting the original file into the Source folder with my changed documents?

    How can i stop the Action Wizard from putting the original file into the Source folder with my changed documents?

    [discussion moved to Creating, Editing & Exporting PDFs forum]

  • Can no longer drop a MIDI file into iTunes library

    Using Tiger on a G4 iMac, I could drop a MIDI file into my iTunes library and convert it to an mp3 (or other format).
    Can't get this to happen now that I'm using Leopard on a new machine (see below) - or is there a different way of doing it in Leopard?
    With thanks,
    Gilly

    Answering my own question - had iTunes set to Show Duplicates - therefore couldn't see MIDI I dropped in.

  • How to put IPOD Shuffle I into Disk Mode ?

    How to put Ipod Shuffle I into diskmode ?

    When connected, in iTunes click on shuffle icon in Devices, then click on Settings tab. Scroll down and click the square in front of "Enable disk use", the adjust slider for amount of flash memory to reserve for data. Click Apply, and you're done!
    When you use iPod shuffle as a disk, the status light on the front of iPod shuffle blinks orange continuously, and the iPod shuffle disk icon appears on the desktop on the Mac, or as the next available drive letter in Windows Explorer on a Windows PC. Drag files to and from iPod shuffle to copy them.
    Ejecting iPod shuffle Important: If the iPod shuffle status light is blinking orange, you must eject iPod shuffle before disconnecting it from your computer. If you don’t eject iPod shuffle before disconnecting it, you could damage files on iPod shuffle.
    To eject iPod shuffle:
    Click the Eject (C ) button next to iPod shuffle in the iTunes Source list. If you’re using a Mac, you can also eject iPod shuffle by dragging the iPod shuffle icon on the desktop to the Trash.
    If you’re using a Windows PC, you can eject iPod shuffle by clicking the Safely Remove Hardware icon in the Windows system tray and selecting your iPod shuffle.

  • How to import jar & exp file into the eclipse 3.1 + jcop

    hi, I am new to the javacard technology.
    I have implementing applet by using eclipse 3.1 + jcop plugin.
    recentlly, i got jar and exp file from someone. and I have to import given two files in the my applet.
    Q1. but i don't know how to use(import) two files into the elipse.
    and...
    I have tried to put the export file structure in the build path, but I am still getting the same error:
    Q2. "resolving constant-pool of clazz cash/ccash; failed: no such clazz cash/ccash;", what means?
    anyone help me~plz!
    many thanks..
    lsh.
    Message was edited by:
    neonoble

    1) In the Package explorer right-click the project you want to import the jar files into.
    2) Click import
    3) Select Archive file in the Import dialog box and click next
    4) Browse to the jar file and select it
    Socx

  • How can I sync text files into iPhone?

    How can I sync text files into iPhone? like doc. txt. for reading or editing

    The native iPhone OS doesn't allow that. I think there are several solutions to this, some of which may be against the AT&T or Apple rules. One legitimate solution is The Missing Sync for iPhone by mark/space (http://www.markspace.com).
    Before I had an iPhone, I owned a copy of The Missing Sync for Windows Mobile. It was a pretty decent app. In my opinion, though, their app for the iPhone is NOT worth the price ($40 new, $25 for a cross-grade).
    Also, check the App Store (if you have 2.0 software)--there may be an app that does this, probably for a lot less $.

  • How to package other jar files into one jar?

    How to package other jar files into one jar? How can i get the class in the inner jar file?

    Generally not a good idea. The Java runtime won't be able to load classes from those "inner" jars, you'd have to write your own classloader to do that. It's not a brilliant idea, generally, anyway, since the point of having lots of jars is to keep your application modular. Bundling them all together like that means you have to re-deploy the whole thing to fix, for instance, one small bug in one small library
    If you really want to do this, there's an Eclipse plugin called FatJar, but I urge you to consider whether you really want to do it first.

  • Importing .midi files into iTunes library

    Hello! Can anyone please tell me how to import .midi files into my iTunes library, then convert those files into .mp3 to burn onto a CD?
    Thank you for your help!

    Does this midi file play elsewhere?
    I am getting the file from another location on my hard drive, not from a CD.
    Doesn't matter. File -> Add file to library will work if the file is compatible.
    Also, when trying to change the import settings, it seems to be for importing from a CD, not from another file location.
    It is for importing or converting.

  • How do I look up how to put Cafe townsend  tutorial into dreamweaver

    How do I ask how to put Cafe Townsend Tutorial into dreamweaver. I have a mac. The tutorial notes say follow this line
    (Mac OS X) Macintosh HD/Users/your_user_name/Documents/local_site. I don't understand what each section means. If someone called explain it that would be great as I ended up with an empty folder in dreamweaver with the name 'Cafe Townsend' on it. Thank you

    Right.  It's an empty local site folder until you put something into it. 
    Go to step 2.  Download and unzip the Check_Magazine.Zip files
    http://download.macromedia.com/pub/developer/check_magazine.zip
    Go to step 3. Copy the check_magazine folder into your local_sites folder (Cafe Townsend).
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.com/blogspot.com

  • Can anyone import a midi file into Gb 2.02?

    I have tested this on both G5's. I cannot drag in .mid file
    cannot do! I even downloaded a midi file from the internet
    and ran it thru dent du midi and could not import it into Gb2.02..... if this is true it is a bug noone has reported.
    if i cant and you can then i cant imagine why two of my g5's cant do the same task.....
    please just try to drag a midi file into GB 202

    eight nine ten...
    my midi files are from Cubase SL 1.04 exported midi files created about 3 years ago. They are the number 1 type. They are from sequenced works done over 20 years. They imported perfectly until yesterday.This is duplicated on both G5's! Now i havent tried importing in a month. Files i get off the net are fine. They import nicely. If i take these cubase midi exported files and drag over midi du vent they open up in another folder and each aiff comes thru but these when imported are not the midi info i need.
    These .mid files that WORKED since GB2 and NOW DONT drag and drop is the reason for panic. I also dont have QT pro as is inferred in your thoughtful message.
    1. i think i updated QT 7.02 in the last month.
    thats the only change i can think, could that be the fault here? this is quite the enigma among other problems.
    I reinstalled cubase sl 1.04 and imported these files and
    they opened nicely with each track and its own data.
    the problem here doctor is that I cannot import them into this infamous GarageBand 2.02
    why buy QT pro?
    what else should i do
    thanks

  • How to insert a image file into oracle database

    hi all
    can anyone guide me how to insert a image file into oracle database now
    i have created table using
    create table imagestore(image blob);
    but when inserting i totally lost don't know what to do how to write query to insert image file

    Hi I don't have time to explain really, I did have to do this a while ago though so I will post a code snippet. This is using the commons file upload framework.
    Firstly you need a multi part form data (if you are using a web page). If you are not using a web page ignore this bit.
    out.println("<form name=\"imgFrm\" method=\"post\" enctype=\"multipart/form-data\" action=\"FileUploadServlet?thisPageAction=reloaded\" onSubmit=\"return submitForm();\"><input type=\"FILE\" name=\"imgSource\" size='60' class='smalltext' onKeyPress='return stopUserInput();' onKeyUp='stopUserInput();' onKeyDown='stopUserInput();' onMouseDown='noMouseDown(event);'>");
    out.println("   <input type='submit' name='submit' value='Submit' class='smalltext'>");
    out.println("</form>"); Import this once you have the jar file:
    import org.apache.commons.fileupload.*;Now a method I wrote to upload the file. I am not saying that this is correct, or its the best way to do this. I am just saying it works for me.
    private boolean uploadFile(HttpServletRequest request, HttpSession session) throws Exception {
            boolean result = true;
            String fileName = null;
            byte fileData[] = null;
            String fileUploadError = null;
            String imageType = "";
            String error = "";
            DiskFileUpload fb = new DiskFileUpload();
            List fileItems = fb.parseRequest(request);
            Iterator it = fileItems.iterator();
            while(it.hasNext()){
                FileItem fileItem = (FileItem)it.next();
                if (!fileItem.isFormField()) {
                    fileName = fileItem.getName();
                    fileData = fileItem.get();
                    // Get the imageType from the filename extension
                    if (fileName != null) {
                        int dotPos = fileName.indexOf('.');
                        if (dotPos >= 0 && dotPos != fileName.length()-1) {
                            imageType = fileName.substring(dotPos+1).toLowerCase();
                            if (imageType.equals("jpg")) {
                                imageType = "jpeg";
            String filePath = request.getParameter("FILE_PATH");
            session.setAttribute("filePath", filePath);
            session.setAttribute("fileData", fileData);
            session.setAttribute("fileName", fileName);
            session.setAttribute("imageType", imageType);
            return result;  
         } And now finally the method to actually write the file to the database:
    private int writeImageFile(byte[] fileData, String fileName, String imageType, String mode, Integer signatureIDIn, HttpServletRequest request) throws Exception {
            //If the previous code found a file that can be uploaded then
            //save it into the database via a pstmt
            String sql = "";
            UtilDBquery udbq = getUser(request).connectToDatabase();
            Connection con = null;
            int signatureID = 0;
            PreparedStatement pstmt = null;
            try {
                udbq.setUsePreparedStatements(true);
                con = udbq.getPooledConnection();
                con.setAutoCommit(false);
                if((!mode.equals("U")) || (mode.equals("U") && signatureIDIn == 0)) {
                    sql = "SELECT SEQ_SIGNATURE_ID.nextval FROM DUAL";
                    pstmt = con.prepareStatement(sql);
                    ResultSet rs = pstmt.executeQuery();
                    while(rs.next()) {
                       signatureID = rs.getInt(1);
                    if (fileName != null && imageType != null) {
                        sql = "INSERT INTO T_SIGNATURE (SIGNATURE_ID, SIGNATURE) values (?,?)";
                        InputStream is2 = new ByteArrayInputStream(fileData);
                        pstmt = con.prepareStatement(sql);
                        pstmt.setInt(1, signatureID);
                        pstmt.setBinaryStream(2, is2, (int)(fileData.length));
                        pstmt.executeUpdate();
                        pstmt.close();
                        con.commit();
                        con = null;
                if(mode.equals("U") && signatureIDIn != 0) {
                    signatureID = signatureIDIn.intValue();
                    if (fileName != null && imageType != null) {
                        sql = "UPDATE T_SIGNATURE SET SIGNATURE = ? WHERE SIGNATURE_ID = ?";
                        InputStream is2 = new ByteArrayInputStream(fileData);
                        pstmt = con.prepareStatement(sql);
                        pstmt.setBinaryStream(1, is2, (int)(fileData.length));
                        pstmt.setInt(2, signatureID);
                        pstmt.executeUpdate();
                        pstmt.close();
                        con.commit();
                        con = null;
            } catch (Exception e) {
                con = null;
                throw new Exception(e.toString());
            return signatureID;
       }

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • How to put the alv output into the spool request?

    Hi guys,
    How to put the alv output into the spool request?
    Thanks!

    Hi
    Sending an ALV List screen output to SPOOL
    Convert ALV list to PDF and send mails to respective persons
    Regards
    Pavan

Maybe you are looking for