How to put parental block on

i dont know how to put it on my 7 year old keeps going on youtube

https://support.mozilla.com/en-US/kb/Parental+controls

Similar Messages

How does a parent block phone number of unwanted friends of teenage daughter?

How does a parent block phone number of her teenage daughter's friends who use free phone number app to get new phone number every time we block it?

As the number keeps changing you can't block them, but your carrier may offer a parental control option that blocks ALL incoming calls except for a list of allowed numbers. Contact the carrier.

Can i put a parental block on my childrens ipods, can i put a parental block on my childrens ipods

can i put a parental block on the ipod touch?

To some extent yes. See:
iOS: Understanding Restrictions
You can also purchase a browser that allows controls. Safe Browser from the App store is one.

I put parental controls on my sons computer and now he is unable to get onto many needed sites. I would like to change the restrictions but unfortunately I can not remember my passwords. How can I find my passwords?

I put parental controls on my sons mac book air and now he is unable to get onto many needed sites. I would like to change the restrictions but unfortunately I can not remember my passwords. How can I find my passwords?

That is stealing. Your friend has no right/licence to give the songs to you. It violates copyright law.

How can I put parental controls on laptops my kids already own?

Hi all,
I bought my two daughters MacBook Airs this year, and they're great of course.
While setting up the MacBook Airs, the setup required user names and passwords for the accounts. So they have those. Each kid is the administrator of her computer, it therefore seems.
I would like to put parental controls on the MacBook Airs now. (They're good kids, but I'm concerned about all the adult stuff on the internet.) Is it too late?
Do I need to set everything up again so that I'm the Administrator and they're the users? On previous (PC) laptops, I hated this, because then I had to sign in every time there was a software update and such.
Is there a way to set up parental controls after the fact now in a way where I won't have to sign in all the time to troubleshoot their computers? Do I have to delete their current accounts, set up a new account for them and an account for me as "administrator"? Will that become horribly cumbersome?
Any experiences and advice most welcome. Thank you.

Admin rights are held in the Users & Groups Preference pane.
Log in as her.
Create a new user for you and give that user Admin rights.
Log her out.
Log in as you and take her admin rights away.
Set Parental Controls.

How to put the form in Query mode

Hello
Please let me know how to put the form or block in Query mode , so that when i run the form it should be in Query mode . I have seen properties of SET_FORM_PROPERTY and SET_BLOCK_PROPERTY but cannot find one
Thanks

QUERY mode? Did you mean, that you can only QUERY without changing data.
This is the QUERY-ONLY-mode, which can be started e.g. call_form
this is the help for that topic:
PROCEDURE CALL_FORM
(formmodule_name VARCHAR2,
display NUMBER,
switch_menu NUMBER,
query_mode NUMBER,
data_mode NUMBER,
paramlist_name VARCHAR2);
query_mode
NO_QUERY_ONLY (The default.) Form Builder will run the indicated form in normal mode, allowing the end user to perform inserts, updates, and deletes from within the called form.
QUERY_ONLY Form Builder will run the indicated form in query-only mode, allowing the end user to query, but not to insert, update, or delete records.

I tried to sinc my photos and i ended up deleting off my phone all the pictures. i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help

i tried to sinc my photos and i ended up deleting off my phone all the pictures. i only ended up with one folder, and i cant figure out how to put rest of folders from my computer back on my phone.....help
and on a second problem. I need to know for sure that my contacts are backed up on my computer

Create a parent folder on your computer to store the named folders of photos that you want transferred to your iPhone. Under the Photos tab for your iPhone sync preferences with iTunes, select the parent folder. All named folders of photos within will be transferred to your iPhone as separate folders or albums.
Regarding your 2nd question, this should be easy. Your contacts should be available on your computer with or without an iPhone or any cell phone, which can be lost or stolen.
Although contacts are included with your iPhone's backup which is updated by iTunes as the first step during the iTunes sync process, not a good idea to depend on this either since the iPhone backup includes a significant amount of other data. Contacts are designed to be synced with a supported address book app on your computer. With Windoze, this can be with Outlook 2003, 2007, or 2010 along with syncing calendar events and notes, or with the address book app used by Outlook Express with XP and by Windows Mail with Vista and Windows 7 called Windows Contacts for syncing contacts only.

I put parent control on my sons apps so he cant download 17 apps, but I just found out if he restores his phone in itunes he can download an app then go back and back it up. Is there a way I can black restore on Itunes?

I put Parents Control on my sons apps so he cant download 17+ apps, but I just found out if he goes on itunes he can restore his phone to orginal settings which wont have parent control on it. Then when ever he wants he cant backup his phone so it looks like nothing ever happened. Is there a way I can bloack restore on itunes?

You can't block restoring in iTunes, but any restrictions you put on the phone are included in the iPhone backup, thus if your son restores from backup, he will restore any restrictions you put on the phone. His only choice, to completely remove restrictions, is to restore as a new device. You can also set parental controls in iTunes: iTunes>Preferences>Parental.

How to put Stored Procedure in Receiver JDBC channel

Hi all,Good Evening,Iam using a JDBC to JDBC scenario in which I have to move the data from database into XI and we all know that the Interfaces which require stored procedures on Oracle database server for publishing the data needs to be called in combination of BPM & Receiver JDBC adapter.
        In this method, a dummy interface will be created for triggering the process. This interface could be designed using any adapter which works on polling mechanism (sender JDBC/File). Dummy interface will invoke a small BPM designed for each business object. BPM will make a synchronous call to Oracle database by calling underlying stored procedure. Stored procedure will return the result set by using a cursor. BPM will send this result set to target application.
        Now my question is how to put a stored procedure in a receiver JDBC channel which need to collect the data from database when BPM makes a synchronous call.
       Because it is required in my scenario,can any one tell me how and where to put stored Procedure in JDBC receiver channel.
Thanks in advance,
Regards,
Prajwal

Your action should be EXECUTE for stored procedures in Message mapping.
<StatementName5>
<storedProcedureName action=u201D EXECUTEu201D>
    <table>realStoredProcedureeName</table>
<param1 [isInput=u201Dtrueu201D] [isOutput=true] type=SQLDatatype>val1</param1>
</storedProcedureName >
</StatementName5>
action=EXECUTE
Statements with this action result in a stored procedure being executed. The name of the element is interpreted as the name of the stored procedure in the database. If you use the optional <table> element, the value specified here is used as the stored procedure name. This enables you, for example, to define stored procedure names containing non-XML-compatible characters or characters that prevent them from being used in interface definitions in the Integration Builder/PCK. If specified, <table> must be the first element in the block within <dbTableName>.
The elements within the stored procedure are interpreted as parameters. They can optionally have the attribute isInput=u201C1u201C (input parameter) or isOutput=u201C1u201C (output parameter) or both (INOUT parameter). If both attributes are missing, the element is interpreted as an input parameter. The parameter names must be identical to those of the stored procedure definition.
The attribute type=<SQL-Datatype> , which describes the valid SQL data type, is mandatory for all parameter types (IN, OUT, INOUT).
http://help.sap.com/saphelp_nw2004s/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sap.user72/blog/2005/10/15/jdbc-adapter-execution-mode-chained-or-unchained
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi

How to achieve parent - child record insert in forms

Guys,
I am new to forms. I do have a requirement where I need to create one tabular block for 10 rows (parent record) and then I need to create three tabular tabs of 5 rows for detailed records (child). That means each tab can have 5 records for 1 parent row.. Thats how this parent-child structure has ONE to MANY relationships
To achieve this requirement I created one parent block of table type (using table XX_Parent) and then I created three detailed block for each tab (Tab_A,Tab_B,Tab_C) using child table (XX_Child). For each tab while inserting the data I took one context_value column in child table. i.e. when I insert the data using Tab_A , context_value column will be A. In the same way B and C for Tab_B for Tab_C respectively. And I wrote this logic at PRE-INSERT trigger for each tab. But when I insert the data for all the tabs, it allows me to enter successfully for Tab_A only, the moment I navigate from Tab_A to enter the data intoTab_B, it throws me error like "You are passing NULL value to set context_value". I hope I make the requirement clear to you.
I am not sure if I am following the right approach to achieve my requirement. if its not right, please suggest me right one.. and if its right please guide me resolve the error..
Looking forward to your reply.
Thanks
Sunil

Andreas,
I had already created relations between Matster Block -Tab_A block, Master Block -Tab_B block and Master Block - Tab_C block...
The point is all the three tabs are created using one table XX_Child only.. I used context_value A,B and C respectively so that once I query the data for XX_Child from backend, I should be in a position to figure out what data is inserted using Tab A, B and C. why I need so .. because If take my entire form in query mode and search for a master record.. then Tab_A, tab_B and Tab_C display their respective data. I hope, I make you understand.. Can you please guide me.
Thanks
Sunil

How to put the SQL-statement returned value into the field (as a default)

Hi,
I am using Developer/2000 (Forms Designer) under windows 98.
Please tell me how to put the SQL-statement value (as a default value) into the field before enter-query mode. Noted that I have tried the following ways but still some problems:-
1) Place the SQL-statement into PRE_QUERY trigger in the form/block level.
There is a message box which ask 'Do you want to save the changes?'.
2) Place the SQL-statement before execute enter_query. There is still a
message box which ask 'Do you want to save the changes?'.
Any hints? Thanks. Urgent.

solved it!
1) Suppress DEFAULT save message
if form_failure then
raise form_trigger_failure;
end if;
2) Place the default value before enter-query.
Ref: Title='Default value in query field in ENTER_QUERY mode' in designer forum by CVZ
form level trigger
============
WHEN-NEW-ITEM-INSTANCE
=======================
if :system.mode = 'ENTER-QUERY' then
:block.item := 'default waarde';
end if;
3) Suppress the changes whenever leaving the default field.
if :block.item is null then
-- assign statement
end if;

How to put database in single user mode?

hi
how to put database in single user mode?and what could be the impact of this to EBS R12 RUP 6.DB 10.2.0.0
rgrds

hsawwan wrote:
Hi,
Are you referring to restricted mode? If yes, please see these links/docs.
Restricting Access to an Open Database
http://download.oracle.com/docs/cd/E11882_01/server.112/e10595/start002.htm#ADMIN11155
Note: 1059291.6 - How to Put a Database into Restricted Mode and Verify Restricted Mode
The impact is none of the users will be able to connect to the database/application (except for the sys user which can connect to the database). Usually, you would need to put the database in restricted mode when doing upgrade/migrate (i.e. you do not want to have active user sessions in the database during that time).
Thanks,
HusseinHi
i want to mean:
ALTER SYSTEM QUIESCE RESTRICTEDThe ALTER SYSTEM QUIESCE RESTRICTED statement may wait a long time for active sessions to become inactive. You can determine the sessions that are blocking the quiesce operation by querying the V$BLOCKING_QUIESCE view. This view returns only a single column: SID (Session ID). You can join it with V$SESSION to get more information about the session, as shown in the following example:
select bl.sid, user, osuser, type, program
from v$blocking_quiesce bl, v$session se
where bl.sid = se.sid;I suspect all apps user can.t login to db?
Edited by: new2appsdba on Aug 19, 2010 1:54 AM

Can you put parental controls on an ipod touch

Can we put parental controls on an ipod touch?

This:
iOS: Understanding Restrictions
and
Parental Controls
For setting it up on the iPod see:
Parental Control???: Apple Support Communities]
How to Setup Parental Controls on iPhone & iPod Touch | Mobicip Blogs, Discussions & Help
how do i put parental control on my...: Apple Support Communities
parental control: Apple Support Communities

How to move a block from Content to Tab Canvas?

Hi All,
I've make a master and detailed blocks in an content canvas
Now this master block has another some detailed blocks, How to put a tab canvas on this content canvas?
that is if I created a new tab canvas it will appear in another page not in the content canvas!

Is the Tabbed Canvas larger than the Content Canvas? Also, just to clarify, when you created the tabbed canvas - did you draw the tabbed canvas on the content canvas in the Visual Designer? If you created the tabbed canvas by adding it to the Canvas Node in the Object Navigator and then set the appropriate properties to assign the window, x/y coordinates, etc., I've seen this cause unexpected behavior. It is better to draw the tabbed canvas on the content canvas rather than add it to the Canvas node through the object navigator.
Hope this helps,
Craig B-)
If a response is helpful or correct, please mark it accordingly.

How to do to block windows ?

How to do to block windows ?

with Safari open
go to Safari>Preferences
go to the security tab
put a check mark next to "Block Pop-Up Windows"
if your talking about Windows OS (Windows XP, Windows 7, etc.) you don't need to do anything. Windows Batch files, Virus, Malware, Executables, etc wont run in Mac OS, (but they could be a problem if you happened to have Windows installed AND running on your Mac at the time of the incident.)

How to put parental block on

Similar Messages

Maybe you are looking for