How to put quote character into string on CSS11500?
I'm trying to write kal script. Our service returns response in this form:
status="0" version 1.0
or
status="1" version 1.0
I'm able to connect to, but I need to write
somethink like
socket waitfor ${SOCKET} "status="1""
But it causes syntax error. I tried \"1\", \'1\', ""1"", but nothing works.
Does anyone have idea how to write this?
you could also provide hexadecimal value instead of text using the option 'raw' at the end of the socket command.
http://www.cisco.com/en/US/products/hw/contnetw/ps792/products_administration_guide_chapter09186a00801eea3e.html#1004389
Regards,
Gilles.
Similar Messages
-
How to put html file into a canevas?
How to put html file into a canevas?
Hi,
would require you to write a JavaBean that interprets the HTML (there are commercial versions of this available)
Frank -
How to put selected videos into one place (File)
How to put selected videos into a File so I can only show on TV the videos in that file
YYou have to describe your issue in more detail. Are you using iTunes? Trying to see it in Apple TV, etc, etc.
-
How to put Variable value into Labeltext of a subcomponent WIB
Hello
In our Web Based Planning tool we uses Tabstrib_control component and the Label-Text is filled like 'Plan 2008'. (Our BPS = 3.5 and Web interface builder)
I am looking for a way,how to put a variable into the Label field of the component. I am not sure if there is a possibility to enhance the labelfield with variable values.
Thanks a lof for any good idea.
Best regards
Christian
Our BPS = 3.5 and Web interface builderHello Christian,
Maybe I have a solution for your problem.
1. Create subcomponent "Selector variable" with your variable.
2. Hide this new subcomponent
3. Write in the Label-Text: <%=descr("Name of new subcomponent"/value)%>
If the variable will be selected by the user in the web interface, put the name of this selector in the field "Update upon Change of" in the properties of the new created subcomponent.
Hope this helps.
Friedrich -
How to put my podcasts into playlist folders? Can't drag'em.
How to put my podcasts into playlist folders? Can't drag'em.
I've subscribed to a number of podcasts & they appear in my iTunes window under the Podcasts section.
There i have
2 problems:
1st: I can't rearrange or group them so can listen consecutively to different topics.
I must listen to one, then come to the keyboard and select the next to start playing. Now, I know that I can get them to play consecutively once I've placed them into Playlist folders,
but that brings me to my second problem:
2) I can't drag and drop them into separate iTunes FOLDERS (by topics).
(Though I have been able to drag&drop separate items from my 'Music' section into iTunes playlist folders.)
But can't drag from Podcasts section into Playlists,
as everytime I try they just refuse to go in and scurry back to their starting position under Podcasts.
Zupwidiss? This can't be.
I would be grateful for your solution.
And also grateful if I could have easily found the solution explained
before I had to resort to bothering this forum with this question.
Just using my MacMini, Snow Lep.Thanks very much.
You have reminded of the
difference between
Playlists and Playlist Folders:
One can only drag things from the Master list into PLAYLISTS.
And can only drag Playlists into Playlist Folders.
I'm an older man, and easily confused by these things.
Many thanks to my friend in Germany.
P.S. Your English is excellent. -
How to put measures correctly into spreadsheet
Hi expert,
I loaded data into a planning model, and I can see data in BW and BEX, but when I put 'ACCOUNT' into row, and 'TIME' into column, I can't see 'measures' in spreadsheet, eventhough I drag 'measures' into spreadsheet from EPM pane, then update, getting blank for 'measures', it is gone. please tell me how to put measures correctly into spreadsheet.P.S If you are creating report by drag n drop on EPM pan, then same way need to add measure dimension in desired axis.
Share the screen shot.
Shrikant -
How to put 2nd column into 1st column in excel
Hello,
I have a question how to put 2nd column into 1st column in excel. Thank you.
Solved!
Go to Solution.Why the 1 iteration for loops?
Why the two Index Arrays? It is just trying to fix the problem created by the For Loops on the original 1-D arrays.
Both of those things are creating 2-D arrays that are complicating things and can be eliminated.
You can take your 2 1-D arrays, use Build Array and right click to set "Concatenate Inputs".
If you do have a 2-D array, you can use Reshape Array to make it a 1 column by N row 2-D array. -
How to put a dvd into ipod touch
i have no idea how to put my DVDs into my ipod touch! can someone help? i have the new touch, 3g i think? it's a 32GB. i really don't feel like having to buy the movie on itunes when i already own it as a dvd. can someone please help me?
Sorry, but the Apple Forum Terms of Use don't permit us to discuss ripping commercial DVDs. Try Googling for such information.
-
How to put the data into cache and distribute to nodeusing oracle coherence
Hi Friends,
i am having some random number data writing into file,from that file i am reading the data and i want to put into cache,how can i put the data into cache and partition this data into different nodes ( machines) to caluculate like S.D,variance..etc..like that.(or how can i implement montecarlo using oracle coherence) if any one know plz suggest me with flow.
Thank you.
regards
chandraHi robert,
i have some bulk data in some arraylist or object format,i want to put into cache.
i am not able to put into cache.i am using put method like cache.put(object key ,object value) ,but its not allowing to put into cache.
can you please help me.i m sending my code.plz go thru and tel me whr i did mistake.
package lab3;
import com.tangosol.net.CacheFactory;
import com.tangosol.net.NamedCache;
import com.tangosol.net.cache.NearCache;
import java.io.File;
import java.io.FileNotFoundException;
import java.io.PrintWriter;
import java.util.ArrayList;
import java.util.List;
import java.util.Random;
import java.util.Scanner;
import javax.naming.Name;
public class BlockScoleData {
* @param args
* s=The spot market price
* x=the exercise price of the option
* v=instantaneous standard deviation of s
* r=risk free instantaneous rate of interest
* t= time to expiration of the option
* n – Number of MC simulations.
private static String outputFile = "D:/cache1/sampledata2.txt";
private static String inputFile = "D:/cache1/sampledata2.txt";
NearCache cache;
List<Credit> creditList = new ArrayList<Credit>();
public void writeToFile(int noofsamples) {
Random rnd = new Random();
PrintWriter writer = null;
try {
writer = new PrintWriter(outputFile);
for (int i = 1; i <= noofsamples; i++) {
double s = rnd.nextInt(200) * rnd.nextDouble();
//double x = rnd.nextInt(250) * rnd.nextDouble();
int t = rnd.nextInt(5);
double v = rnd.nextDouble() ;
double r = rnd.nextDouble() / 10;
//int n = rnd.nextInt(90000);
writer.println(s + " " + t + " " + v + " "
+ r );
} catch (FileNotFoundException e) {
e.printStackTrace();
} finally {
writer.close();
writer = null;
public List<Credit> readFromFile() {
Scanner scanner = null;
Credit credit = null;
// List<Credit> creditList = new ArrayList<Credit>();
try {
scanner = new Scanner(new File(inputFile));
while (scanner.hasNext()) {
credit = new Credit(scanner.nextDouble(), scanner.nextInt(),
scanner.nextDouble(), scanner.nextDouble());
creditList.add(credit);
System.out.println("read the list from file:"+creditList);
} catch (FileNotFoundException e) {
e.printStackTrace();
} finally {
scanner.close();
credit = null;
scanner = null;
return creditList;
// public void putCache(String cachename,List<Credit> list){
// cache = CacheFactory.getCache ( "VirtualCache");
// List<Credit> rand = new ArrayList<Credit>();
public Object put(Object key, Object value){
cache = (NearCache)CacheFactory.getCache("mycache");
String cachename = cache.getCacheName();
List<Credit> cachelist=new ArrayList<Credit>();
// Object key;
//cachelist = (List<Credit>)cache.put(creditList,creditList);
cache.put(creditList,creditList);
System.out.println("read to the cache list from file:"+cache.get(creditList));
return cachelist;
public static void main(String[] args) throws Exception {
NearCache cache = (NearCache)CacheFactory.getCache("mycache");
new BlockScoleData().writeToFile(20);
//new BlockScoleData().putCache("Name",);
System.out
.println("New file \"myfile.csv\" has been created to the current directory");
CacheFactory.ensureCluster();
new BlockScoleData().readFromFile();
System.out.println("data read from file successfully");
List<Credit> creditList = new ArrayList<Credit>();
new BlockScoleData().put(creditList,creditList);
System.out.println("read to the cache list from file:"+cache.get(creditList));
//cache=CacheFactory.getCache("mycache");
//mycacheput("Name",new BlockScoleData());
// System.out.println("name of cache is :" +mycache.getCacheName());
// System.out.println("value in cache is :" +mycache.get("Name"));
// System.out.println("cache services are :" +mycache.getCacheService());
regards
chandra -
How to put Chinese character in jar file by java.util.jar.Manifest?
Now I want to develop a simple package tool which can modify some property in manifest.mf of jar files,but the Manifest class's putValue method only can correctly save English character.why?
And how can I put Chinese character?
the code is:
Attributes ab = mf.getMainAttributes();
ab.putValue("agent-Name", agent);Attribute values can contain any character and it will be UTF-8 encoded when written to the manifest, according to Javadoc.
What makes you think that this mechanism fails? What do you see instead of the Chinese character? And what tool/editor/program you use to see it? I did not try myself, but according to the Javadoc there should be no problem. -
How to put a collection into a Ref Cursor?
Hi,
I am trying to create a procedure (inside a package) which fills a collection and I need to fill a ref cursor (out parameter) with this collection. I can fill the collection but I how can I fill the ref cursor? I am receiving the message "PL/SQL: ORA-00902: invalid datatype" (Highlighted below as comments)
I have a limitation: I am not allowed to create any kind of objects at the database schema level, so I have to create them inside the package. I'm writting it with SQL Tools 1.4, I'm also not allowed to do this in SQL+.
This is the code of the package. The cursors' selects were simplified just because they are not the problem, but their structure is like follows below.
CREATE OR REPLACE PACKAGE U3.PKG_TESTE AS
TYPE REC_TYPE IS RECORD(
COL1 VARCHAR2(50) ,
COL2 VARCHAR2(100) ,
COL3 VARCHAR2(20) ,
COL4 VARCHAR2(30) ,
COL5 VARCHAR2(100) ,
COL6 VARCHAR2(50) ,
COL7 NUMBER(3) ,
COL8 VARCHAR2(30) ,
COL9 VARCHAR2(16) ,
COL10 VARCHAR2(50) ,
COL11 NUMBER(4) ,
COL12 VARCHAR2(40)
TYPE REC_TYPE_LIST IS TABLE OF REC_TYPE
INDEX BY BINARY_INTEGER;
TYPE C_RESULTSET IS REF CURSOR;
VAR_TAB_TESTE REC_TYPE_LIST;
PROCEDURE Z_REC_INSTANCE
pUSER_SYS_CODE VARCHAR2,
pSYS_SEG_CODE VARCHAR2,
pComplFiltro VARCHAR2,
pCodInter NUMBER,
cResultset out C_RESULTSET
END PKG_TESTE ;
CREATE OR REPLACE PACKAGE BODY U3.PKG_TESTE
AS
PROCEDURE Z_REC_INSTANCE
pUSER_SYS_CODE varchar2,
pSYS_SEG_CODE varchar2,
pComplFiltro varchar2,
pCodInter number
AS
cursor cur1 is
select 'A' COL1, 'B' COL2, 'C' COL3, 'D' COL4, 'E' COL5,
'F' COL6, 'G' COL7, 'H' COL8
FROM DUAL;
regCur1 cur1%rowtype;
cursor cur2 is
SELECT 'I' C1, 'J' C2, 'K' C3, 'L' C4
FROM DUAL;
regCur2 cur2%rowtype;
varSQL varchar2(4000);
varCOL10s varchar2(100);
varFiltroAtrib varchar2(100);
varCount number(10);
BEGIN
varCount := 1;
open cur1;
Loop
fetch cur1 into regCur1;
exit when cur1%notfound;
open cur2;
Loop
fetch cur2 into regCur2;
exit when cur2%notfound;
VAR_TAB_TESTE(varCount).COL1 := regCur1.COL1;
VAR_TAB_TESTE(varCount).COL2 := regCur1.COL2;
VAR_TAB_TESTE(varCount).COL3 := regCur1.COL3;
VAR_TAB_TESTE(varCount).COL4 := regCur1.COL4;
VAR_TAB_TESTE(varCount).COL5 := regCur1.COL5;
VAR_TAB_TESTE(varCount).COL6 := regCur1.COL6;
VAR_TAB_TESTE(varCount).COL7 := regCur1.COL7;
VAR_TAB_TESTE(varCount).COL8 := regCur1.COL8;
VAR_TAB_TESTE(varCount).COL9 := regCur2.C1;
VAR_TAB_TESTE(varCount).COL10 := regCur2.C2;
VAR_TAB_TESTE(varCount).COL11 := regCur2.C3;
VAR_TAB_TESTE(varCount).COL12 := regCur2.C4;
varCount := varCount + 1;
end Loop;
end Loop;
-- I'd like to do something like this:
-- c_resultset := select * from var_tab_teste;
-- but i don't know how to put the records of the type on the ref cursor,
-- probably because I don't know how to select them
-- pl/sql: ora-00902: invalid datatype
for varCount in (select COL1 from table( CAST ( VAR_TAB_TESTE AS REC_TYPE_LIST ) ))
loop
dbms_output.put('WORKS');
end loop;
END Z_REC_INSTANCE;
END PKG_TESTE;
SHOW ERR PACKAGE PKG_TESTE;
SHOW ERR PACKAGE BODY PKG_TESTE;
SHOW ERR PROCEDURE PKG_TESTE.Z_REC_INSTANCE;
I'm using:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Thanks in advance.I don't have the exact version but in 9iOK I lied, I found a 9i instance ;-)
Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
JServer Release 9.2.0.7.0 - Production
SQL> CREATE TABLE table_name (column_name VARCHAR2 (30));
Table created.
SQL> INSERT INTO table_name VALUES ('value one');
1 row created.
SQL> INSERT INTO table_name VALUES ('value two');
1 row created.
SQL> COMMIT;
Commit complete.
SQL> CREATE OR REPLACE PACKAGE package_name
2 AS
3 TYPE collection_type_name IS TABLE OF table_name%ROWTYPE;
4
5 FUNCTION function_name
6 RETURN collection_type_name PIPELINED;
7 END package_name;
8 /
Package created.
SQL> CREATE OR REPLACE PACKAGE BODY package_name
2 AS
3 FUNCTION function_name
4 RETURN collection_type_name PIPELINED
5 IS
6 BEGIN
7 FOR record_name IN (SELECT column_name
8 FROM table_name) LOOP
9 PIPE ROW (record_name);
10 END LOOP;
11
12 RETURN;
13 END function_name;
14 END package_name;
15 /
Package body created.
SQL> VARIABLE variable_name REFCURSOR;
SQL> BEGIN
2 OPEN :variable_name FOR
3 SELECT column_name
4 FROM TABLE (package_name.function_name);
5 END;
6 /
PL/SQL procedure successfully completed.
SQL> PRINT variable_name;
COLUMN_NAME
value one
value two
SQL>I recommend though that you test this thoroughly. There were bugs with this approach when it was newly introduced that prevented you from dropping the package. -
How to convert xslt file into string
i'm writting a java program to use xslt to transform the xml file. i'm encountering the problem when i try to convert the xslt file into string. i've defined my utility class called 'XmlUtil' to carry out the operation of transform xml file through xslt. but in my main java program i need to convert both xml and xslt file into a string in order to input them in my function argument. my function argument is as follows:
String htmlString = XmlUtil.applyXsltString(xmlContent, xsltString);
i've already converted xmlcontent into string by using:
xmlContent = xmlContentBuffer.toString();
but i don't know how to convert 'xsltString' now ? i've searched the google for an hour but i cannot find the solution. anyone can help ?
detail of my souce code is as follow:
import java.io.*;
import java.net.*;
import java.lang.*;
import java.io.StringReader;
import java.lang.reflect.Array;
import java.util.Properties;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.sax.SAXResult;
import javax.xml.transform.sax.SAXSource;
import javax.xml.transform.sax.SAXTransformerFactory;
import javax.xml.transform.sax.TransformerHandler;
import javax.xml.transform.stream.StreamSource;
import org.apache.xml.serializer.OutputPropertiesFactory;
import org.apache.xml.serializer.Serializer;
import org.apache.xml.serializer.SerializerFactory;
import org.w3c.dom.Document;
import org.w3c.dom.Node;
import org.w3c.dom.NodeList;
import org.xml.sax.InputSource;
import org.xml.sax.XMLReader;
import org.xml.sax.helpers.XMLReaderFactory;
import XmlUtil;
public class FileDownload {
public static void download(String address, String localFileName){
OutputStream out = null;
URLConnection conn = null;
InputStream in = null;
StringBuffer xmlContentBuffer = new StringBuffer();
String temp = new String();
String xmlContent;
try {
URL url = new URL(address);
out = new BufferedOutputStream(
new FileOutputStream(localFileName));
conn = url.openConnection();
in = conn.getInputStream();
byte[] buffer = new byte[1024];
int numRead;
long numWritten = 0;
System.out.println (in.toString ());
while ((numRead = in.read(buffer)) != -1) {
out.write(buffer, 0, numRead);
numWritten += numRead;
temp = new String(buffer);
xmlContentBuffer.append(temp);
System.out.println(localFileName + "\t" + numWritten);
xmlContent = xmlContentBuffer.toString();
String htmlString = XmlUtil.applyXsltString(xmlContent, xsltString);
} catch (Exception exception) {
exception.printStackTrace();
} finally {
try {
if (in != null) {
in.close();
if (out != null) {
out.close();
} catch (IOException ioe) {
public static void download(String address) {
int lastSlashIndex = address.lastIndexOf('/');
if (lastSlashIndex >= 0 &&
lastSlashIndex < address.length() - 1) {
download(address, address.substring(lastSlashIndex + 1));
} else {
System.err.println("Could not figure out local file name for " + address);
public static void main(String[] args) {
for (int i = 0; i < args.length; i++) {
download(args);
}I don't understand why you need load the XML and XLS files into a String. A Transformer can be constructed from a Source and there is a StreamSouce which can be constructed from an InputStream. The transform() method can take a Source as input and can produce a Result. There is no need to go near a String representation of either the input.
-
How to convert BLOB data into string format.
Hi,
I have problem while converting blob data into string format.
for example,
Select dbms_lob.substr(c.shape.Get_wkb(),4000,1) from geotable c
will get me the first 4000 byte of BLOB .
When i using SQL as i did above,the max length is 4000, but i can get 32K using plsql as below:
declare
my_var CLOB;
BEGIN
for x in (Select X from T)
loop
my_var:=dbms_lob.substr(x.X,32767,1)
end loop
return my_var;
I comfortably convert 32k BLOB field to string.
My problem is how to convert blob to varchar having size more than 32K.
Please help me to resolve this,
Thanx in advance for the support,
NileshNilesh,
. . . .The result of get_wkb() will not be human readable (all values are encoded into some binary format).
SELECT utl_raw.cast_to_varchar2(tbl.geometry.get_wkt()) from FeatureTable tbl;
-- resulting string:
☺AW(⌂özßHAA
Å\(÷. . . .You may also want to have a look at { dbms_lob | http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_lob.htm#i1015792 } "The DBMS_LOB package provides subprograms to operate on BLOBs, CLOBs, NCLOBs, BFILEs, and temporary LOBs."
Regards,
Noel -
How to put iPod 5G into retail mode
How can I put iPod 5G INTO RETAIL MODE AS I RUN A PHONE SHOP
What do you mean by retail mode?
Apple uses their own custom iOS mods to have iOS devices for demonstration in their stores.
You can do some restrictions of use of the iOS device by using Guided Access. See:
http://support.apple.com/kb/ht5509 -
How to put DVD directly into iPod?
As above.
ThanksI havent found a good freeware program yet. I used DVD shrink and it worked fine but it put the file into seval parts.
I have heard DVD decryptor is a good one but the project was shut down so you can only download it through a file sharing network suchas limewire.
I havent gotten around to doing it yet so I dont know how good it is
Maybe you are looking for
-
I Bought a iPad and when I turn it on I get the hello scree, then the language page, then the country page then the fourth page says must sign in with Apple id and password and it shows the part of the persons I'd shaded out in grey. It says I need t
-
Customer aging with hierarchies
Hello, We are looking for a way to see the customer aging of open items by highest entry in the customer hierarchy. With S_ALR_870121789 we are pretty close to what is expected but the highest level in this report is the payer. Hierarchy is not taken
-
Hello, I have installed Reader, Adobe Acrobat, trial versions of Photoshop and Illustrator. Some more than once. They work for a few days at most then I am told to re-install. I cant look at any pdf file even though I can still see reader in my progr
-
How to open a native PDF file in Android using AIR?
Hello.I have created a flex mobile project to open and show a native PDF file in Android. I have tried three different methods below , but I failed. 1. I created a stagewebview and used "stageWebView.loadURL". I can see the PDF View in emulator but
-
Problem configuration LAC 1.0
hi all, i have some problem when i try configuration LAC 1.0 when i try call function <b>Live Auction</b> from ITS the page error : Internal Server Error 500! java.lang.NullPointerException at com.sap.srm.la.server.util.UMAuthenticator.checkSSOC