How to put regions side by side in a single track? (LE 9)

I've clipped about 20 or regions out of a very long track (track 1) and moving them to a new one (track 2). Is there a function that allows you to take those small clips in Track 2 and lay them out side by side, as opposed to dragging each one to the beginning.
I'm pretty sure there is, but I obviously don't have the right word to use, because the LE help and the search engines are getting me nowhere.
Thanks for any help

This function does exist: in Arrange menu -> Regions -> Tie Regions by Position Change
Select all regions on a track by clicking on a track header once. Then go to that command in the Regions menu That will do the trick.
Note: with the cycle on it will only tie regions withing the cycle range, so disable cycle before doing that if you want to apply this command to all regions on a track

Similar Messages

  • How to put a side-value to a svg

    Hello,
    how can I put a page-item-value to a svg?
    SELECT NULL
           ,v.datum
           ,round(v.q_month,2) wert
    FROM   v_mp v
    WHERE  v.datum >= add_months(SYSDATE,-1)
    AND    v.PC = :P1_PCThe result is 'no data found'
    SELECT NULL
           ,v.datum
           ,round(v.q_month,2) wert
    FROM   v_mp v
    WHERE  v.datum >= add_months(SYSDATE,-1)
    AND    v.PC = 1That shows the right svg-graph...

    Hello,
    how can I put a page-item-value to a svg?
    SELECT NULL
           ,v.datum
           ,round(v.q_month,2) wert
    FROM   v_mp v
    WHERE  v.datum >= add_months(SYSDATE,-1)
    AND    v.PC = :P1_PCThe result is 'no data found'
    SELECT NULL
           ,v.datum
           ,round(v.q_month,2) wert
    FROM   v_mp v
    WHERE  v.datum >= add_months(SYSDATE,-1)
    AND    v.PC = 1That shows the right svg-graph...

  • How do you fade a single track?

    im trying to fade a brass section track in a piece im doin , how do you just fade a single track in logic express? all the info i found is how to do the entire song not just a single track? thanks

    select the track in the Arrange window, and go to View. enable Hyperdraw/Volume. click the gray line, and pull the dot downward. experiment!

  • How do I Place Two Or More Template Regions Side by Side?

    How do I change the page size of a template or a template region so that I can place two templates side by side with the content in between?
    Maybe I need to know how to place two or more template regions side by side?
    Can you insert a template into a table?
    How do you insert a template within the main template along side a region within the main template?
    Sorry to ask so many questions but each approach would sole the sampe problem.  (Putting two or more regions, side by side.)
    Thank you in advance for any help that you can offer me.

    How do I change the page size of a template or a template region so that I can place two templates side by side with the content in between?
    Template regions are not layout regions.  They do not add any structure to your page, and only provide a way to add content to whatever HTML structure contains the template region.  So - you need to make your Template's HTML provide the space.
    For example, you could have a three column, one row table with an editable region in the left/right cell.  The exact answer, though, will depend on your page's layout and where you want the editable regions to be placed within that layout.
    In addition, you say "place two templates side by side" as if the regions were the templates.  That's not correct.  There is a template file, which contains editable regions.  Thus, you could not place two templates side by side.
    Can you insert a template into a table? 
    See the answer above.  You can place an editable region inside a table.
    Sorry to ask so many questions but each approach would sole the sampe problem.  (Putting two or more regions, side by side.)
    I bellieve you are very confused about what templates are and how to use them, and so I strongly suggest you read DW's F1 Help about templates before going further with this project.

  • Using iMovie-does anyone knows how to put two videos side by side in the same screen/

    Using iMovie-Does anyone knows how to put two videos side by side in the same screen?

    See iMovie Help here.
    http://help.apple.com/imovie/mac/10.0/#movb8c659f55

  • How to put two pictures side by side without loosing the size?

    how to put two pictures side by side without loosing the size? I did create a new canvas and double the size but my pictures are smaller in the new canvas please help meeeeeeee!!! my pictures are High13.6 and wide 20.533 with a resolution 240 im working on photoshop cs3 or cs6

    Are you trying to print two pictures on the same sheet of paper?  If so, then use Picture Package in CS3  (it is not part of CS6 unfortunately)
    http://voices.yahoo.com/using-adobe-photoshop-picture-package-great-digital-614329.html

  • How to put safari full screen without click/drag the sides and without going in to fullscreen mode??

    How to put safari full screen without clicking and dragging the sides and without going in to fullscreen mode?
    Thanks
    EG

    Hi, e8god.  
    Thank you for visiting Apple Support Communities.  
    The option to take apps full screen is still available.  Here are the steps on this feature in Yosemite.  
    Take apps full screen
    In many apps, you can expand the window to fill your entire screen. While in full-screen view, swipe to see another app’s full-screen window, to see your desktop, or to see a space you created.
    Expand to full-screen view: Click the green full-screen button in the top-left corner of an app window, or press Control-Command (⌘)-F.
    Move between windows in full-screen view: Swipe left or right on a trackpad or Magic Mouse. For more information, see Learn trackpad and mouse gestures.
    Return to standard view: Move the pointer to the top-left corner of the screen, then click the green full-screen button again, or press Control-Command (⌘)-F.
    Take apps full screen
    Cheers, 
    Jason H.  

  • How to Change my SID in Service market Place

    Dear All,
    I installed SAP ECC 6.0 with MS SQL 2005. I put the SID & System Number while Installation,
    SID : J01
    N0  : 00
    But in my Service market Place I already gave the SID : R01.
    How to edit my Service Market Place.
    Let me know
    Regards
    Thomas.T

    No editing for SID changing.
    Delete and Create new SID
    Thanks
    Siva

  • Can someone tell me how to get my side tool panel back?

    I'm hoping someone can tell me how to get my side tool panel back. I'm using adobe elements 10.0. Everything was fine, then all of a sudden the side tool panel disappeared and my whole screen is covered with adobe elements workspace.
    Hope you can help

    oh! yes ,
    It should be Shift + Ctrl + ALT on windows
    and Shift + Command + Option on Mac

  • How to scan both sides of document in color to pdf with the dr-m160?

    how to scan both sides of document in color to pdf with the dr-m160?

    Hi healthynhappy1.
    To scan a 2-sided document, you will need to change the scanner settings in the software. 
    If you are using Capture On Touch:
    You will need to turn off the "Scan in Full Auto" option. 
    Next, you will open [Scanner Settings] and change the "Scanning Side" to Duplex. 
    Verify that the [Color Mode] shows "24-bit Color" and when you get the option to save the file, verify the [File Type] shows as "PDF".
    If you are using CapturePerfect:
    Click [Scan].
    Click [Scanner Settings].
    Change the [Scan Side] to "Duplex".
    Verify that [Color Mode] is set for "Color" and then save the file as "PDF".
    I hope that this information is helpful to you.  Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).  Have a great day!
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • How do you position side by side tables so they print correctly on separate sheets?

    How do you position side by side tables so they print correctly on separate sheets?

    Hi CJ,
    I just saw this solution by Jerry:
    https://discussions.apple.com/thread/5653936?tstart=0
    It is non-intuitive how to get there, but Menu > File > Print... to get to Print Preview. Then Click on Print.. at bottom right. This does not print, but opens a dialogue where you can choose to Open PDF in Preview (click on PDF bottom left).
    Have fun!
    Regards,
    Ian.

  • HOW TO VIEW PAGES SIDE BY SIDE IN UPDATED PAGES APP

    How to view pages side by side in updated pages app in Mavericks.

    Good day Jerry,
    Yes I found it.
    I will now delete version 5.0.1
    Hope I don't get surprises.
    Thank you and best regards.
    Ray

  • How can I create side bars without cropping the image?

    I want to create side bars because I am projecting in an vertical panel, but if I crop the image them I only get the middle part of it.
    How can I create side bars in an way that I can still move the image inside?

    On a Video Track directly above the clip(s) you want to have behind the side bars, place a clip of Color (or whatever you want to use for your sidebars).
    Now go to the Effects Tab > Matte >Mask Shape and drag the Mask Shape filter to the Color clip you have placed on the timeline.
    Double click on the clip to open it in the viewer, and click on the Filters Tab.
    Click Invert Box, and adjust the shape to get the side bars you want.
    And now the clip(s) that are beneath this effect will have the side bars and be independent of it, so that you can move them around.
    MtD

  • How to open the side cover

    How to open the side cover so the computer HP Envy H8-1500er?
    This question was solved.
    View Solution.

    Hi,
    See the guide on the following link.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02863836&tmp_task=useCategory&cc=ua&dlc=en&lc=e...
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How U Perform Client Side Validations In Webdynpro?

    Hi experts,
    explain me abt How U Perform Client Side Validations In Webdynpro?
    Thanks in advance
    Sreenivas

    Hi ,
    As the javascripts used for client side validations are not supported in Webdynpro, All the validation written in a code take a complete cycle at runtime.
    You need to write the validations in the corresponding eventhandler i.e. action.
    Regards
    Deepak

Maybe you are looking for

  • Creation of company code

    I have created a company code by copying (coppy as ) the standard company code 0001. While copying it was shown that some of the entries was copied successfully but some of was not . I have mainted P.org, site , storage location . But while craeting

  • File Extention when using JFileChooser

    I'm using the JFileChooser and a FileFilter with for extensions of .ses, and I can't get it to append .ses to a file name if the user doesn't do it at the time they are in the File choser. What I've tried: JFileChooser fc = new JFileChooser(); fc.set

  • Time Machine locked all Excel files. Help?

    I have had Macs for many years but have not used Time Machine until yesterday. I turned on Time Machine for the first time and did a back-up last night. Today, I cannot open any Excel file on my computer as they all appear to be read-only. I am using

  • I-pod wont sync new songs that were added on itunes....

    this has been happening for over a month now where i connect my i-pod to my computer and the computer freezes. I am unable to even click anything on itunes becuase the program is frozen. I then unplug my i-pod from my computer and my computer goes ba

  • Unable to start OES Admins Server (i.e asiAdminServer)

    Hi All, My goal is to install OES 10.1.4.3 . Below is my environment: - RHEL 5.5 64 bit. - SQL Server 2005. - Weblogic 10.3.3 (wls1033_generic.jar) -Java version is 64 bit JDK as shown below: *"1.6.0_21" Java(TM) SE Runtime Environment (build 1.6.0_2