How to put report title and page no to appear in multiple pages,when using cross tab reports

Post Author: shaminranaweera
CA Forum: General
I am using crystal reports 9.0 with odbc foxpro database conectivity
I have designed a cross tab report and it is on the report header part and all the report details  are fine,except that the report title and  and page no's only show on the first page of my report.Pls tell me how can i put my report title and page no on all the pages in my crosstab.

Post Author: foghat
CA Forum: General
You need to put your title in the page header if you want it to appear on every page.  The report header only displays once per report.

Similar Messages

  • How to create a title over the top of the left-most column in a cross-tab.

    This is one of those things that seems simple until you try it.
    I'm almost there.  I moved the cross-tab from the report header to the report footer so I can have a page title.  I tried using an overlay but it didn't work for any page past the first.
    I can't seem to figure out how to put a title over the left-most column though.
    Thanks in advance,
    J

    I have used a text box, after you type in the text, select the box, and move it to the front.
    then select the crosstab and move it to the back.

  • How to make cross Tab report for SAP B1

    Hello and Hi
    i trying to make cross tab report for SAP B1 but test column not appera in
    File >>New >>Cross Tab Report  start cross tab report creation wizard select database name and table
    but only numeric columns appear in available column fields , how will appearall fields including test fields..

    i got solution
    thanks google
    memo type field will not apper in list .use bellow  statment to convert in interger or char type
    convert(int,U_Dist_Sr_No) AS Dist_Sr,            CAST(U_Dist_Name AS varchar(250)) AS Dist_Name,

  • Cross tab report-dyanamic columns for months and quarterly sum

    Hi all,
    I work on report creation in BI Publisher.I need to display values in a cross tab report in a way that it shows data for 3 months and then a column for its quarterly sum.
    For ex:-
    Market --Jan       Feb    Mar    Q1_sum Apr May Jun Q2_sum ---------------like wise for n months
    Market1 100 --80 --30 -- 210 --10 -- 80 --90 --210
    Market2 120 --90 --40 --250 --100 --70 --30 --200
    Market3 130 --70 --60 --260 --140 -- 0 --40 --180 ('--' just to maintain indentation)
    The values of number of months( date range) and the names of market are derived dyanamically .
    The code from my sql query presently shows months-range (Jan ,feb,mar..), Quarterly sum to be displayed, Market names etc as child elements in multiple occurences main Query set.
    <Main Query>
    <Market>abc</Market>
    <Region>abc</Region>
    <Months-Range>abc</Months-Range>
    <Quarterly_sum>abc</Quarterly_sum>
    <Main Query>
    <Main Query>
    </Main Query>
    Please guide me on code in rtf template for the same.
    Thanks
    Edited by: user9061488 on Jul 13, 2010 1:32 AM
    Edited by: user9061488 on Jul 13, 2010 3:48 AM

    Hi,
    Do u have time dim in your metadata??
    If not,
    Create a time dimension year,quater,month,day
    http://lh4.ggpht.com/_rhCtHYLiamQ/S7PQvxYBbzI/AAAAAAABZXI/ef_Ur9AmyUo/s800/04_year_quarter_bmm.jpg
    After that in fact table by using the (ago/todate) function ....pull the respective columns to pivot table columns section(date column) and measures col in measures section and enable the grand total in columns section so that it will show grand total for every quarter
    thanks,
    saichand.v

  • Variance formual in Cross tab report

    Hi,
    I am new to crystal and don't have formal training. I am trying to create a report that shows Actuals and Budget and I want to the variance.  Format is 1 row is for actuals, 1 row is for budget and the other is for forecast.
    I would like to have a variance that is actual - budget and another actual - forecast for each measure.
    I am using cross-tab report for formatting, any assitance for how to over write totals coloumn with Variance calculation, assistance for creating variance formula in formula workshop is required. I happend to see the logic in other forums but not in cross-tab scenario.
    Thanks in advance.
    Bhanu

    Use a manual Crosstab report so you have full control

  • CanGrow Property in Cross-Tab Report

    Dear Friends,
              I am using Cross-Tab report. I would like to set the cangrow property for a particular field. But i couldn't do that. Because cangrow property is disabled for all the fields in cross-tab. How should i enable this property.
              Is there any other alternative way.
    Thanks in Advance,
    Stalin. A

    What tool are you using?  Crystal Reports, Web Intelligence, Desktop Intelligence?

  • Total is not matching in Cross Tab Report

    Hi Every one,
    I am using Crystal Report Basice 2008 for sap business one.
    I added a One cross tab report .But the Row level totals are not matching in the report.Please suggest.
    Thanks and Regards
    DEV

    Hi Dev,
    What is the 'Summary' type you've chosen for the Summarized fields?
    If it's Min or Max, the Row totals would also show Min/Max of all the columns for that row.
    -Abhilash

  • Totals in a cross tab report

    I'm working with Crystal Reports XI.  We have an existing report that was created using the Cross-tab report type.
    There are 3 summary fields in the report:
    - direct cost
    - indirect cost
    - Total ( direct cost + indirect cost)
    Everything worked fine until now because both the direct cost and the indirect cost were being rounded to 2 decimal places.  However, I have a new requirement to round the indirect cost total to a whole dollar ( no decimal places) before adding it to the direct cost total.  This creates a problem for the third summary field because I'm only able to do:
    - create a formula field of (direct cost + indirect cost rounded to a whole dollar)
    - use that amount in the summary field
    The problem is that then the indirect cost is being rounded for EACH record separately.  But what I need to to calculate the Total indirect cost first and only after I have that total rounded to a whole dollar, add it to the direct cost total.
    So basically, I would like for the third row to simply show the sum of the first row and the second row.
    I can't take the current total ( direct cost + indirect cost) and then round this total because the rounding for the total direct cost needs to be done in a different way than the rounding for the indirect cost total.
    Is that possible with the cross-tab report type?  Is it possible to have 2 running totals in a cross tab report and then have a custom field in the report that rounds each using the appropriate rounding algorithm and then adds the two up.
    thanks

    Thank you for your suggestions.  I kind of suspected that I wouldn't be able to use the current cross tab report to achieve this but since I've never worked with a cross tab report before I wanted to make sure this is the case before investing the time to do it some other way.
    I will try using the manual cross tab report as you suggested.
    Thanks again.

  • Report Title and Text Area issue when exported to pdf using Viewer

    Hi there,
    We are using OracleBI Discoverer Version 10.1.2.55.26
    We have reports that displays Report title containing the following
    - Report Title
    - Runt Date and Time
    - Page No
    And text area which displays 'Last Page'
    Following properties are set at the worksheet level using page setup
    Report Title --> 'Print on every Page'
    Text Area --> 'Print on last page'
    The report when exported to PDF using Discoverer plus works fine and displays report title and text area as defeined.
    But when we try to export the same report to pdf from Discoverer viewer, it displays
    - Report title on first page only.
    - text area on all pages
    All our users accesses report using discoverer viewer so we cannot open discoverer plus to them.
    Is there a solution which will enable us to export the report in pdf using discoverer viewer and displays the same output as discoverer plus.
    Please let me know... If you have any questions then please feel free to ask.
    Thanks in advance for your help...
    Manish

    but when opened on other os x machines some text is colored differently than it should be
    Well, if typographic objects are colour managed, the colour appearance is dependent on the source ICC profile that describes the colourants in the typographic objects and the destination ICC profile that describes the colours the display is able to form and the RBC colourant combinations that will form those colours.
    In general, typographic objects should have special treatment, since the expectation is not that typographic objects should be colour managed, but that typographic objects should simple be set to the maximum density of dark. On a display, that is R=0 G=0 B=0 and on a seperations device (a lithographic press) that is C=0 M=0 Y=0 K=100.
    If for some reason typographic objects are colour managed, and if the ICC profiles for the displays are off by half a mile or more in relation to the actual state of the display system, then the colours will not be the same. On the other hand, if those displays are calibrated and characterized, then the colourants will be converted to form the same colours on the displays.
    /hh

  • How to add an image or static text in the header of EACH page of a cross-Tab report

    Post Author: rtutus
    CA Forum: General
    Hi, I use Crustal 11.0.
    I have a cross Tab. I display the items on the left column and the months horizontally, the items are grouped by category field. The values are the sum of quantities are displayed for each month. Like this:
                             Items         Jan       Feb       March .....................Total
    Category 1                       
                             Item11         val11     Val12      Val13                     Total values
                             Item12         val21     Val22      Val23                     Total values
                             Item13         val31     Val32      Val33                     Total values
    Category 2                       
                             Item21         val11     Val12      Val13                     Total values
                             Item22         val21     Val22      Val23                     Total values
                             Item23         val31     Val32      Val33                     Total values
    Category 3                       
                             Item31         val11     Val12      Val13                     Total values
                             Item32         val21     Val22      Val23                     Total values
                             Item33         val31     Val32      Val33                     Total values
    The problem, I want to add a page header for each page of the report.
    When Crystal reports first displays my cross-tab in the designer, CR displays the cross tab in the Report header section. I d like to add text or image for each page and not only at the begining of my Cross-Tab.
    If I just add an image or text at the top of the report designer, which is my report header, I get the image or text only on the begining of the 1st page of my report but never in the other following pages.
    If I try to work around the problem and move the cross Tab to a group section instead, and then put the Image in the group header, I get what I want, but the problem is that:
    The columns header: Jan, February....December are displayed for each group of my report and not only in the beginning of the report. I get something like this:
                             Items         Jan       Feb       March .....................Total
    Category 1                       
                             Item11         val11     Val12      Val13                     Total values
                             Item12         val21     Val22      Val23                     Total values
                             Item13         val31     Val32      Val33                     Total values
                             Items         Jan       Feb       March .....................Total
    Category 2                       
                             Item21         val11     Val12      Val13                     Total values
                             Item22         val21     Val22      Val23                     Total values
                             Item23         val31     Val32      Val33                     Total values
                             Items         Jan       Feb       March .....................Total
    Category 3                       
                             Item31         val11     Val12      Val13                     Total values
                             Item32         val21     Val22      Val23                     Total values
                             Item33         val31     Val32      Val33                     Total values
    You see the months get duplicated. Any way, my real need is to add an image or text in the header of EACH page of a cross-Tab report.
    Thanks a lot for your help.

    Hi Divya,
    you could do for example in the wdDoInit() of the view
    wdContext.currentContextElement().setPicture("picture.gif");
    Now you assign this context variable to the Tab using the Tab_header's imageSource-Property. When you click on its value column, you see a button with three dots on it. If you click on this button, you will get all context nodes and attributes for this View. Usable variables are clearly marked, you now choose the one named Picture or what ever name you prefer to use. But it must correspond to the one set in the wdDoInit.
    I think setting a picture (not necessarily for the tab-page) is done in one of the excellent tutorials. If you are a newcomer I strongly recommend doing some of the tutorials.  I have learned tremendously from them.
    Hope this helped
    Harald

  • How do I change headers and footers in one single document in Pages?

    How do I change headers and footers in one single document in Pages? I would appreciate any help as this seems to be quite frustrating. Thanks so much!!

    Why are you not sure whether you have Mavericks or not?
    And what version of Pages are you talking about?
    Insert a Section Break and uncheck the copies previous option.
    All the Headers and Footers are the same within a Section.
    Peter

  • How to put Check Boxes and Radio button in Smartforms

    Hi all,
    How to put check Box and radio button in Smartforms ............ from web properties there is an option to use. But How to use.     
    regards,
    Mohsin

    u can declare the checkboxes or radiobuttons whatever in driver program and pass the same to ur form...

  • I am so frustrated.  I put ab object and/or a text box on a page and then cannot select it - the Text cursor (not pointer) is put on the object or text box and nothing happens.  It is so frustrating!  I then open up Everweb and the same thing,

    I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens.  It is so frustrating!  I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot.  I know it must be something system wide as it happens in apps other than Pages.

    I put an object and/or a text box on a page and then cannot select it - the Text cursor (not pointer, just the text cursor shows) is put on the object or text box and nothing happens.  It is so frustrating!  I then open up Everweb and the same thing, I create an object and then try and elect it to make it bigger etc and cannot.  I know it must be something system wide as it happens in apps other than Pages.

  • The download button as described on the HELP page doesn't appear on the page with my downloadable list of songs. How do you down load a purchase? I have made 3 purchases of the same song and can not down load it and the HELP instructions don't help.

    The download button as described on the HELP page doesn't appear on the page listing my purchase.
    The HELP instructions list that such a button must be clicked to down load an item.
    I have made 3 purchases of the same song in an attempt to download it.
    Only one of those purchases appears on the page that list purchases available to down load.
    I wrote out a copy of the HELP page instructions (the page can't be printed) so I could accurately follow it as I tried to do the down load.
    Is there some secret to downloading a purchase or causing the down load button to appear?

    Hello L Swarz,
    Thank you for the details of the issue you are experiencing when downloading your purchased song to your iPod nano.
    I am not sure if you have tried these specific steps, but I recommend downloading the purchased song to iTunes on your computer using the steps in the following article:
    iTunes 11 for Windows: Download previous purchases from the iTunes Store
    http://support.apple.com/kb/PH12491
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How to create cross tab reports using RAS SDK api with Crystal Reports XI

    Hi Everybody,
    Iam generating reports in a web-based application with Crystal Reports XI using Report Application Server(RAS) SDK API. The columns in my report exceed that of an A4 sized page. So, when I export that report to pdf, only those columns that fit to a page are showing up. To solve, this problem, I thought of using cross tab. But, I donot know how to generate cross tab report using RAS SDK API. I have tried to get some code from the internet. But, I did not find any java code for that.Can some one give me some sample code.It is very urgent.
    Thanks in advance.

    Hi,
    The easiest way I use is to create the worksheet as regular table and then when i verify the data I get (non aggregate) I duplicate it as a cross tab.
    In the duplication wizard I just need to define the axis (using drag and drop).
    if you want to create a cross tab from the beginning you need to define that in the new workbook wizard (check the "cross tab" rather then "table"), chose your fields and define the place you want them.
    The data point (the center of the cross tab) is aggregated as to your machine definition and will happen automatically.
    for example: to find the amount of receipt by months:
    On the left put the "Buyer Name", on top put the "Months" and in the data point put the amount.
    What you'll get is something like:
    months: jan feb mar apr ......
    buyer_name
    jhon_smith 100 50 30 250 ......
    jhon_doe 80 45 90 453 ........
    and so on.....

Maybe you are looking for

  • Single Sign-On and Forcing logins

    Hi I'm new to single sign-on firstly. Is it possible for a company using SSO, to force a user to login again when trying to access a certain web application, in this instance a J2EE application within the company's domain (I know it defeats the purpo

  • Change language of time/date browse button

    Hi. How I can change the language of time/date browse button. For example, i want to change the caption of button "Set time to Now", to the "Time"? Is it possible? Thanx. Solved! Go to Solution.

  • Receive asynchronous message from JMS  topic over web service

    Hi, I have a JMS topic and I want to expose it as a web service so that clients can make durable subcription to the topic and receive messages asynchronously. What is the best way of doing this ? Is there a portable (to other containers) way of do th

  • When Do I Get My Money Back For A Cancelled Pre-Order?

    I Just Cancelled My Pre-Order. I Just Looked In My Account And It Said I Still Had The Same Amount Of Money. So I Was Wondering When I Get My Money Back For A Cancelled Pre-Order?

  • Lightroom 5 With Lightroom Creative Cloud?

    I have Lightroom 5 installed on my computer.  If I purchase a Creative Cloud version does that mean I will have two copies of Lightroom on my computer?  Can they share the same library at the same time?  If I later decide to end my Creative Cloud con