How to put router in trunk mode and link to switch [Solved]

Hi,
The idea is to configure the wifi on the C870 router.
So, I have this switch prepared to receive the router on one port with vlan 109.
The router is with c870-advipservicesk9-mz.124-24.T2.bin
The router is connected from f4 to the switch port, but when I try to put the router port on trunk its not accepting the switchport mode trunk
interface FastEthernet4
description secondary-TO_SW
no ip address
duplex auto
speed 100
no cdp enable
interface Vlan109
ip address 192.168.71.4 255.255.255.0
ip default-gateway 192.168.71.1
interface Dot11Radio0
no ip address
encryption vlan 10 mode ciphers tkip
broadcast-key vlan 10 change 45
Any idea?
Thanks
** the router its not accepting the switchport command once Im inside the interface

this is what I have
R#sh ip int br
Interface                  IP-Address      OK? Method Status                Protocol
Dot11Radio0                unassigned      YES NVRAM reset                 down
FastEthernet0              unassigned      YES unset administratively down down
FastEthernet1              unassigned      YES unset administratively down down
FastEthernet2              unassigned      YES unset administratively down down
FastEthernet3              unassigned      YES unset administratively down down
FastEthernet4              unassigned      YES manual up                    up
FastEthernet4.109          unassigned      YES unset up                    up
Vlan1                      unassigned      YES NVRAM administratively down down
Vlan109                    192.168.71.4    YES manual up                    down

Similar Messages

I found my old ipod and i forgot the passcode. It doesnt have an home button so i dont know how to put it in recovery mode so i can restore it. Ive been using the assisted touch method. But what should i do to put it in recovery mode

i found my old ipod and i forgot the passcode. It doesnt have an home button so i dont know how to put it in recovery mode so i can restore it. Ive been using the assisted touch method. But what should i do to put it in recovery mode so i can restore it.

Use this program to place the iPod in recovery mode
RecBoot: Easy Way to Put iPhone into Recovery Mode

How to put database in RESTRICTED mode ?

Hi,
in 9.2.0.6 on Windows 2003 server how to put database in RESTRICTED mode ?
Many thanks before.

ERROR at line 1:
ORA-12719: operation requires database is in RESTRICTED mode
That's because 'ALTER SYSTEM QUIESCE RESTRICTED' doesn't actually put the database into restricted mode:
SQL> select logins, active_state from v$instance;
LOGINS       ACTIVE_ST
ALLOWED       NORMAL
SQL> alter system quiesce restricted;
System altered.
SQL> select logins, active_state from v$instance;
LOGINS       ACTIVE_ST
ALLOWED       QUIESCEDTry staring the database in restricted mode and then quiescing it:
SQL>
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup restrict;
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size                  1289508 bytes
Variable Size             117441244 bytes
Database Buffers           46137344 bytes
Redo Buffers                2904064 bytes
Database mounted.
Database opened.
SQL> alter system quiesce restricted;
System altered.
SQL> select logins, active_state from v$instance;
LOGINS           ACTIVE_ST
RESTRICTED       QUIESCED
SQL>As you can see from V$INSTANCE, when you are running in restricted mode LOGINS will have a value of 'RESTRICTED'
However - I still think that if you are dealing with users logging in to your (RESTRICTED) database via the listener then the easiest option is to stop the listener whilst the database is down and restart it once your alter database command has completed.
PS : No any other user is connected.No, they wouldn't be this time because you had quiesced the database... but you still need to get the database into restricted mode for this alter database command.

How to put ipod in recovery mode without a home button ???

how to put ipod in recovery mode without a home button and i cant get in to my devise what can i do ???????????

Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too

How to Put iPad in Landscape Mode

I am an expert computer user, having written many software titles for OSx as well as PC and Linux and Unix. But I am finding the iPad exceedingly difficult to learn.
I can muddle through the basic things, but there is one thing I have not figured out how to do, and after searching the Internet and this forum, I still can't find out how to do it.
How do I put the iPad in landscape mode? I feel like such an idiot because I have tried to figure out how to put it in landscape mode for hours, and can't find the option anywhere. I can't believe I'm the only person who can't figure this out.
Thanks for the help!

I have the opposite problem: can't get OUT of landscape mode. The home screen is landscape, and so are all the other apps, no matter which way I press that view-lock button. The worst problem is in Pages, where I can't see the tool bar and thus edit the file. Do I download a new copy of Pages, or report this to Apple as a hardware issue? And what is Auto-Lock in the Settings? Turning it on/off did not resolve my problem.

I recently wanted to update my phone and so when i put it in recovery mode and tried to set it up it said that i had to enter the apple id that i used to set up the phone the first time but i dont know the information to my old account what do i do?

I recently wanted to update my phone and so when i put it in recovery mode and tried to set it up it said that i had to enter the apple id that i used to set up the phone the first time but i dont know the information to my old account what can i do?

You will need to remember or find the id that you used, without it you won't be able to re-activate your phone - if you are on the activation screen then does that show the first letter of the id and the email provider's name ?
Do you know if you have any of the account's downloads in computer's iTunes library - if you do then you can get the id form that : Recovering a forgotten iTunes Store account name.
If not then see if you can find it via http://appleid.apple.com : Apple ID: How to find your Apple ID.

TS1369 my ipod says that it is locked out for 22,696,574 minutes. ive tried to put it in recovery mode and DFU mode but i tunes wont even recgonize my ipod at all SOMEONE HELP

My ipod says that it is locked out for 22,696,574 minutes. ive tried putting it in recovery mode and DFU mode but nothing works AND itunes wont even recongize my ipod and when i plug it into my computer it says UNKNOWN DEVICE, SOMEBODY PLEASE HELP ME I NEED PICTURES OFF OF IT FOR MOTHERS DAY

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New

My iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

my iphone 4s wont turn on with out being pluged in and when i unplug it it dies instantly i pluged it in put it in dfu mode and tried to restore it hoping it might help but its stuck in dfu and has restore error 21 help!!!

Hey jestinsinclairr,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like you had one issue and then got a second trying to resolve the first. A frustrating situation for sure. The first article linked has what to do if it is not powering on unless plugged in. The second article addresses the error you are receiving when trying to restore.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Resolve iOS update and restore errors
http://support.apple.com/kb/TS3694#10
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
Have a nice day,
Mario

HT201263 ok i pod is disabled but when i put it in recovery mode and it does all the step you have in the above sentece at the top of the pg of itunes it says updateing system and 3 hrs remaining(why's dat) n it also goes bck 2 the main screem(y's that

I have an ipod touch and i put it in recovery mode and to reset it and it does all the main process when i hold the honme button and for 10 sec and then put conenct it to itunes.................and it does the process and its in recovery mode but at the top of the aple pg it has updateding/downloading system ( remaining time 3 hours) why does it says that and another thing and when it startes recoverying from itunes the i pod cuts on by its self and goes back to the main screem, by its self i have touch anything on the ipod .................why does it does that and what i can do to get my ipod back on track and working and i pod is in disabled mode( connect to itunes) i did that but no hlp so what can i do

and it stills have warrenty on it but i dnt wnt to send it back because it still is in good condition and look brand new no straches on screem or etc just plain new looking thats y im trying yo get it recovered but its disabled all the way now and i cant do anything and i have connected it to the ituners on my computer but no help on gettingthe ipod back to standared requalar mode yet.................so any hlp or info or suggestions if so plx feel free to reply or email me [email protected] or txt 334 316 4563 thanks and yeah i know some of u might say sum about my number i put up but its a lil prepaid fne i just bought to get hlp with my ipod and i just wnt to get the ipod fixed quickly asap....( this is not my permanitly fne just a 9.99 phone from dollars general..lol but help me on the ipod or cll the fne on the number i provided or email me at the email or reply on this note

My computer refuses my new iphone 5 and has put it into recovery mode and my computer wont accept hardware download

my computer refuses my new iphone 5 and has put it into recovery mode and itunes has crashed on my computer. Can i get it out of recovery mode without a computer

No, you can't.

When i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.

Hi there,
When I inspect your site in browser tools, I'm getting 404 errors from your page:
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
BarnardosIreland wrote:
I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
Thanks,
Joe

Ipad wont turn on unless i put it in dfu mode, and then it still turns off within a few minutes, ipad wont turn on unless i put it in dfu mode, and then it still turns off within a few minutes

my ipad 2 turns off by its self, it works perfectly fine otherwise, the condition is very good and it has never been dropped or anything. it turns off by itself and then i have to put it in dfu mode and recover it to turn it back on otherwise nothing else works. once i put it in dfu mode, the ipad turns on once fully recoved and restored to orginal settings but a few minutes later the process repeats, and turns off again. any helpp?

If your iPad is jailbroken, we can't help you.
 Cheers, Tom

I have a lock field(boot.efi) in recycle bin how to put it out (for unlock and empty my recycle bin)

I have a lock field(boot.efi) in recycle bin how to put it out (for unlock and empty my recycle bin)

Trying logging out/in or a restart.
If that doesn't allow you to empty the trash:
Trash – Empty When File is Locked or in Use
Trash FAQ
Maybe this will help:
https://discussions.apple.com/message/17029415#17029415

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.

I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

I have a dual 1.8 ghz pwer pc g5 and sometimes i put it in sleep mode and come home on my lunch break and the fan is running at full speed and the computer has frozen up...what is going on here?

and sometimes i put it in sleep mode and come home on my lunch break and the fan is running at full speed and the computer has frozen up...what is going on here? is it a virus or has my computer been hijacked? it cant be good for the computer...anyone ever had this problem..?

Your problem has been reported many times, but causes are as varied as individuals.
Can we assume that a hard shutdown allows a normal restart?
Can I assume that you have used Disk Utility from your OS X install disc to repair the hard drive directory? The freezes and hard shutdowns require that the drive be repaired (not permissions) or soon the machine won't boot at all.
If the root issue is software related, in Console (the application) under Logs, there should be loggings around the time of sleep and logs that tell you what process went wild and froze the machine.
Network activity is also a common casue.
Other info:
http://support.apple.com/kb/ht1776
If hardware related, such as an external drive, other USB device (Wacom tablet) or USB PCI card, ejecting, disconnecting, removing, or in the case of the Wacom, updating drivers, are all potential remedies.

How to put router in trunk mode and link to switch [Solved]

Similar Messages

Maybe you are looking for