How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

Hi guys,
Previously I have had no issues simply using Adobe Audition 3 for simple stereo recording and editing of a stereo feed taken from a mixer... well nearly no issues.... :-)
Today, I'm having a bad day or else it's because I'm getting used to being retired.. :-) ......
Query : How do I put two mono tracks into the usual stereo view in Edit view so they both display correctly there?
Put simply I have two mono wav files. Let's call them Left_wav and Right_wav.
I cannot seem to get them imported into a new clean Edit view (Normal stereo track layout) so that Left_wav is on the top half and Right_wav is on the bottom half.
Whenever I try, I just get either Left_wav or Right_wav taking up the whole of the edit view. i.e. it just shows one track.
Can anyone familiar with Audition 3 kindly help? I'd appreciate a simple step by step... I just can't see where I've been going wrong, and it's driving me bananas :-).
Thanks

There are various ways to do this in Audition 3. here's one.
Open both mono files separately in Edit view. Then convert Left_wav to Stereo by going to Edit/Convert Sample Type and under Channels select Stereo with Left Mix at 100% and Right Mix at 0%. This will give you a new stereo file with Left_wav on the top channel. Next go to the Right_wav and copy to the clipboard using Edit/Copy. Return to your new stereo file and enable Edit Right channel only in Edit/Edit Channel/Edit Right Channel. Then make sure that the cursor is at start of the stereo file and Paste Right_wav into the bottom channel of the new stereo file. Finally Save As.

Similar Messages

How do you combine 2 mono tracks into a single stereo track?

Question here:
How do I combine 2 mono tracks into a single stereo track in Logic?
I recorded using my left and right out of my keyboard to a hard-disk recorder (Korg d888). The files are made as two separate wav files. Is there way to combine these in Logic so I can treat it as one stereo track?
I have several files to do and am hoping Logic has something like a "combine tracks to stereo track" tool or something.

Solo both tracks and bounce them with no effects and faders at 0 dB.

Convert two mono tracks into one stereo?

I've imported a clip from my DV camera into Final Cut. For whatever reason, the clip audio is two mono tracks rather than one stereo track. Is there a way for me to convert this to a stereo track after the import?
Thanks very much,
Greg
G5 Dual 2.5 GHz Mac OS X (10.4.6)

Select both clips in the Timeline, then go to Modify->Stereo Pair (Option L). But if both clips contain the same audio information, it won't really be stereo ... just two tracks panned left & right.
If you want the audio to come in as stereo when you capture next time, make sure that you have the Capture settings for the audio set to "stereo."
-DH

How to make 48 mono tracks into 24 stereo tracks

When I opened a Final Cut Pro project in Audition 5.5 the Final Cut Pro project had 24 stereo pairs. The Audition project has 48 mono tracks. How do I convert every pair of mono tracks into a stereo track?

The FinalCut XML format that is used to send this only accomodates mono clips on mono tracks (just like FinalCut itself). If it supported Stereo clips on Stereo tracks like most DAWs or PremierePro, then it wouldn't really be an issue.
That being said, the linking between two adjacent clips in a stereo pairs in FinalCut doesn't transfer over because this version of Audition CS5.5 doesn't have the ability to group clips. If the source audio files are originally stereo, you could save the session as a SESX, and then perhaps make a script to modify the XML to change all the tracks to stereo, and find and combine 2 mono clips referencing a stereo file, and just make a single stereo clip. I'm not sure if that explanation helps (or even makes sense).
Perhaps you could post the session, and I could give more direct advice.

Two mono tracks to create a stereo tracks

I have a series of piano music a cousin made, but it is all mono. Is there anyway to double the mono track to make a stereo track for CDs?

Yes, you can fake a stereo recording. Duplicate the track, option-drag the region into it, then offset it slightly from the original, and finally pan one track left some, and the other right some.
--HangTime [Will Compute for Food] B-|>

How to put finder icon back into the dock?

does anyone know how to put the finder icon back into the dock because that icon just disappeared and i have no idea how to put it back in. thank you so much if you know how!
iBook 12-inch G4 Mac OS X (10.4.6)

lamfishy,
Welcome to Apple Discussions.
Find the com.apple.dock.plist file in your Macintosh HD/Users/yourusername/Library/Preferences Folder, drag it to the Desktop, log out/in or restart and let us know what happens.
;~)

How to put a Java Program into the System tray

Hi all of the forum!!
I have a question. I want to make a monitor program but I don't know how to put the program in the system tray or just to execute the program but automatically (no manual execute), but i dont want that the program appear in a window, just start to function when i start my PC. i hope anybody help me.
Thanks
Best Regards
Bucio, Francisco

There is a plenty of similar topics here, so you can use the Search on this forum or in Google to find out.
But shortly, you will need to use JNI or get a ready-to-use library like JNIWrapper (http://www.jniwrapper.com/winpack.jsp#tray), for example, that lets you do what you want.
Good luck,
EToporov

How to put imported Toolbar bookmarks into the toolbar instead of a submenu in Bookmarks

I imported my previous Bookmarks but they've all gone into the Bookmarks menu; how do I get the previous Toolbar ones back into the Toolbar instead of just having them in a sub-menu in Bookmarks?

If you import an HTML file then those bookmarks are added at the bottom of the Bookmarks Menu folder.<br />
If you want to have them on the Bookmarks Toolbar then you can move them to the folder with that name via a Cut and Paste action in the sidebar or in the Bookmarks Manager.
See http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

HT1473 Please help!How to put two iTunes accounts on the same computer?

I have an Ipod and my mum has an IPhone. The songs from my IPod are backed up on my computer and we would like to have different music, but both backed up on the same computer. How do i do this without erasing all the music etc that is already on my mums phone?

Launch iTunes with the Shift key held down, create a new library, and import her song files to it. Alternatively, create a new user account on the computer, move the song files to a shared area, and then import them.
(104363)

How to let Premiere or Audition put Extracted audio clips into a desired folder when clicking "Edit clips in Audition"?

I recently did Volume Match for entire feature film dialogue clips, what happened is I found lots of extracted audio clips scattered around in my Media hard disk, luckily I only have one Hard disk for all media, I look it in Preferences in both Premiere and Audition, there is no such setting to put all extracted audio clips in one designated folder. Anyone has any solution to that?

When I send a Premiere sequence to Audition it makes a subfolder with the same name as the Premiere sequence I sent from automatically. All I have to do is specify a path before I hit OK. If you are sending one clip at a time it seems to save that extract next to the Premiere project file.

Mono tracks into stereo

I am using commnad L to link two mono tracks into stereo.
The two tracks are of the same video material.
I need them linked so I can edit them in a smooth manner but when selcted and using the command L fuction they are not linked.
How can I fix this?

You want to make the two audio tracks a Stereo Pair, by selecting them on the timeline and the using Option-L.
MtD

Joining two mono tracks

How do I join two mono tracks to create a stereo track? Somehow when I exported my project from FCP, the stereo music clip ended up as two mono clips... Instead of showing up on track A7&A8, they show up individually on track A7 and track A8, which makes changing levels and keyframing a pain!
In the same vain, how do I split a stereo clip into two mono clips?
thanks in advance!

Yeah, too far in on my STP to go back to FCP and re-export. Did find, however ctrl-clicking on the clip, and selecting channels that way to be of help.
Thanks for the reply!

Possible to Join Two Mono Tracks to Stereo, Or Change Panning of a Stereo?

In the new Garage Band 11, is it possible to Join Two Mono Tracks to Stereo, or Change the Panning of a Stereo track, or split a stereo track into two mono files?
Sometimes it would be convenient when I have a lot of tracks to combine two mono tracks into one stereo track to eliminate an additional track.
Also, I find that I often want to change the panning of a stereo track to either make it wider, or merge the two channels, even reverse L&R. If no way to change the panning of a stereo track can a stereo track be split into two mono tracks to be panned differently?

Woodwyn wrote:
is it possible to Join Two Mono Tracks to Stereo
only by exporting the two tracks
or Change the Panning of a Stereo track
you can pan a stereo track in every version of GB with the pan knob
or split a stereo track into two mono files?
indirectly:
http://www.bulletsandbones.com/GB/GBFAQ.html#stereotomono
(Let the page FULLY load. The link to your answer is at the top of your screen)
want to change the panning of a stereo track to either make it wider, or merge the two channels
that's different. no, you'd have to split the track into two mono files as described above.
even reverse L&R.
same answer

How to make two mono audio tracks into a stereo pair?

My video clip, brought over into Premiere CS6 from Final Cut Pro 5, has the usual left and right audio tracks, but in Premiere they are not linked into a stereo pair. Thus the volume level has to be adjusted separately in each track.
In Final Cut, I can quickly convert two independent audio tracks into a stero pair by selecting the tracks and then going to the menu Modify > Stereo Pair. I can't figure out how to do this in Premiere.
When two audio tracks are not linked, the volume level has to be adjusted separately in each track, which wastes time. But after two tracks are linked into a Stereo Pair in Final Cut, adjusting either track adjusts them both, together. That's what I want to do now in Premiere.
So, how do I make two separate audio tracks into a linked Stereo Pair in Premiere?
Tom

Hi Tom,
Tom77 wrote:
I need to do in my videos that I either can't do in Premiere or that require involved workarounds like this, things that I can do instantly
I used to think like you do. These aren't workarounds, per se. The issue is that Premiere Pro is a different program, so you have to approach some things slightly differently.
Actually, Premiere Pro's audio capability is more like a DAW than Final Cut was, and more powerful too, so if you know that workflow it makes more sense. A lot of FCP people don't have training in programs like ProTools or Audition, so it's more difficult for folks like yourself (and me, too) to catch on. Once you learn it, though, you begin to see its power.
Tom77 wrote:
things that I can do instantly with the flick of a keyboard command in Final Cut, such as link and unlink audio tracks.
In Premiere Pro CC, you can link and unlink audio and video tracks with a keyboard shortcut for "Linked Selection." You have to create it in your Keyboard Shortcuts dialog box, but it works just like the one in FCP. Make it Shift + L if you like.
Tom77 wrote:
Not to mention the fact that I can have as many projects open in Final Cut as I want, and copy and paste between them. Each open project becomes a tab on the timeline, and I can jump beween projects by just clicking on their tabs. I was shocked when I tried to open two projects in Premiere to find that it only allows one at a time to be open. That seems really primitive--
Again, you can achieve what you want (copying and using items from other projects), you just have to go about it differently. All you do is navigate to the other project files in the Media Browser and import items that you need in this fashion. So, no, you don't have more than one project open at a time, but you got what you wanted, stuff from another projects in your current project. That works for me, anyway.
Again, Premiere Pro is a different program. You can achieve the same goals, but sometimes have to go about it differently. Some things are faster, some slower. Some are easier to learn, some harder. Hopefully, you see my point.
I need video generators to make arrows, circles, squares, etc. and transitions such as edge wipes and clock wipes to animate them, all to point out and emphasize things that I'm demonstrating and explaining in my videos. Premiere has no such generators, nor are there any third-party plug-ins available to add them, that I've been able to find.
Do you know about the Titler? It has a lot of useful shapes. You can also create shapes in After Effects and Photoshop and import them. The shapes you make in those programs can look a lot better than the stock FCP effects.
There are lots of third party effects, some that have generators. Check out Boris Continuum, FX Factory, CoreMelt, Film Impact, and more.
There are pitifully few transitions in Premiere at all (the Mac version) compared to Final Cut.
I'm really not a transitions person, and I find the FCP transitions looking tired anyway. The only one I really need is a white flash and I can either create it, or use a third party flash effect. If you need cool, modern transitions, check out Film Impact or the other third party plug in foundries I mentioned. There is an Edge Wipe transition, called "Wipe." If you need feathering, check out the Wipe Effect, which you can keyframe to look like a transition.
More and more I would like to be moving completely into Premiere, but I keep running into these inadequacies in the program, these roadblocks, for my purposes at least.
The more you work with it, the less you'll be working with FCP. That's what most people are saying anyway. Sure, there are minor annoyances associated with learning a new app, but you also take the good along with it. I suggest you just dive right in. It may take longer at first, but you can get your speed up in time.
I have no doubt that sometime in the future Premiere will become everything that I want it to be, and at that time I can finally abandon Final Cut for good, as I wish I could do right now.
I also came from FCP, taught FCP for nearly a decade, wrote a book about FCP, help start the first FCPUG, worked at Apple on two versions of FC Studio, so I do know what you are going through. Just keep at it and keep posting here. I'll be glad to help you with any workarounds or confusion related to moving over from FCP.
Thanks,
Kevin

HOW TO PUT TWO PANNEL IN THE SAME PAGE

HI ALL
I NEED TO KNOW HOW TO PUT TWO PANNEL IN THE SAME PAGE TO FULLY UTILIZE FULL PAGE AREA BECAUSE THE PANNEL WIDTH IS TOO SMALL , SO I WANT TO MAKE THE PAPER CONTAIN TO PANNELS VERTICALLY.
THANK YOU

So Barb,
I like to use multiple desktops and move back and forth between then using gestures. At the moment I have 5 open: Chrome, Firefox, Safari, Photoshop CS 6 and a desktop. I use "gestures" to navigate between them:
Mac Basics: Multi-Touch gestures - Apple Support
and I use Mission Control (F3) to move the various desktops around in the order I want them.
Mac Basics: Mission Control - Apple Support
So say I'm searching for a photo to open in CS 6, I find it on the open desktop then hit select "open" in CS 6 and go to that folder in the select pane.
Even right now I'm typing this in Safari and "gesturing" back to Chrome where I did the search about multi touch and mission control. I drag copy the URL there and gestured back here to paste the URL into this text.
If you did a lot of photo searches, I set professional clients of mine in Chicago up with dual monitors (In this case you'd have an external monitor on extended desktop.). So all you need to do is just glance over at the second monitor slide your cursor over there open stuff up find your photo and go back to Photoshop and open it up.
Hope this helps.

How to put two mono tracks into the usual stereo view in Edit view of Audition 3 ?

Similar Messages

Maybe you are looking for