How to put up a calendar in VI for date selection?

Hi all,
I need to put up a calendar in my VI for date selection to view historical data like we find on websites of travel agents?
& also guide me how to get this kind of calendar.....
please guide me...
Thanking You,
Vaibhav Gandhi
B.E. Instrumentation & Control,
INDIA
Solved!
Go to Solution.

Thank you so much GURU for your very quick & accurate reply.
Further I need to know, that how I can remove the word 'value' from indicator? i.e. it is giving "Value -> 6/1/2009" on indicator.. I just need '6/1/2009' on indicator...
Can it be possible?
Thanks,
Vaibhav Gandhi
B.E. Instrumentation & Control,
INDIA

Similar Messages

Calendar...list function shows only events for date select instead of events from that date forward.

Calendar list function shows only events for date selected....instead of events for date selected and events forward from that date. Is there a setting change needed? Help!

Hi,
Did you check that your universe object referring "Date of Completion" has Date data type?
Can you also provide the BOE verson you are using?
I remembered that the calendars were not displayed in XIR2 version.
Didier

How to put Mediation Server on Maintenance Mode for LYNC server 2013

how to put the LYNC 2013 Mediation server on Maintenance mode???

Hi,
Did you solve the issue with the help the people above provided?
If you mean server draining feature you can also check Topology option on Lync Server Control Panel, on Topology interface, click “Action” and there is an action called “Prevent new sessions for service”.
Here is a similar case may help you:
http://social.technet.microsoft.com/Forums/lync/en-US/ef3515a9-54c0-4b7a-ab48-45196764d837/how-to-use-lync-server-draining-feature?forum=ocsplanningdeployment
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to generate a new calendar without previous year data

In iCal I previously could, at the end of the year or early in the new year, create a new complete calendar and delete the old data of the previous year leaving only the current year entries. Ever since there was an iCal, I was able to do that.
I think I created an archive for the previous year and then was able to delete the old daily data in a single step to create the new year. There doesn't seem to be any capability to do this.
I have created an archive of my 2012 events but don't want to manually delete hundreds and hundreds (probablty over a thousand) of 2012 entries one by one just to make a calendar with only the few days of 2013 presently in my calendar.
I do NOT use the cloud to store my calendar or any of my information. If that might be the only way to purge old data, then there is a big flaw in Calendar.

I found information on how I created a clean Calendar in January of 2012 when using an older version of OS (probably Lion) and Calendar.
Selected backup option (now only have export or archive as available options)
set prefs to clear older than x days (no options now possible to do this)
create copy
close Calendar
repopen and unchecked the prefs
I have now created a new calendar by the extremely tedious process of deleting over 1000 entries in the 2012 calendar one at a time.
This is a really big flaw in the current Calendar not allowing the easy creation of a new Calendar as was possible just a year ago!!!!! This was possibe every year since we got iCal until now.

How to put a table's all fields on a selection screen?

Hi, I am new here. I am currently create a report in which I need to put a transparent table's all fields on selection screen. Please give me hints about it. Thank you very much in advance.
Tom

Hi,
Use parameter or select-options for all the fields in the transparent table..I am not sure if there is any dynamic way of creating the parameters..
Otherwise you can create a dynamic report..
Check this example for dynamic report..
DATA: p_temp(30) TYPE c DEFAULT 'ZTEST_REPORT'.
TYPES: BEGIN OF t_abapcode occurs 0,
row(72) TYPE c,
END OF t_abapcod.
T_ABAPCODE-ROW = 'REPORT ZTEST_REPORT.'.
APPEND T_ABAPCODE.
T_ABAPCODE-ROW = 'PARAMETERS: P_MATNR LIKE MARA-MATNR.'.
APPEND T_ABAPCODE.
T_ABAPCODE-ROW = 'WRITE: / P_MATNR. '.
APPEND T_ABAPCODE.
INSERT REPORT p_temp FROM it_abapcode.
SUBMIT (p_temp) AND RETURN.
Thanks,
Naren

How to add in ODBC connection and configuration for data connection

Hello expert,
on my computor, there is a oracle client for oracle 10g. now there is new oracle 11g installed , I want to create a ODBC connection to this new database. but when I create ODBC , I can't find server type for oracle 11g , there only has driver for oracle 10g. will you please tell me how to create ODBC for this new DB? will you please tell me where is the configuration file for data source on my computor?
Many Thanks,

918440 wrote:
Hello expert,
on my computor, there is a oracle client for oracle 10g. now there is new oracle 11g installed , I want to create a ODBC connection to this new database. but when I create ODBC , I can't find server type for oracle 11g , there only has driver for oracle 10g. will you please tell me how to create ODBC for this new DB? will you please tell me where is the configuration file for data source on my computor?
Many Thanks,So, on this machine you have
- Oracle 10g client (only), and in a seperate ORACLE_HOME
- Oracle 11g rdbms
First, the 10g client will connect quite well to the 11g database
Second, the 11g database includes the basic client admin software, but the odbc drivers are not installed by default. You have to run OUI and choose 'custom' installation, then select 'windows components' from the list of available components.
I've never wanted to install the odbc driver as part of the database installation. Only on remote client installations.
What are you really trying to achieve?

How to find the info packages which have periodic data selections?

Hi,
is there any way we can find the list of infopackages that have data selection enabled only on time? ( say calendar day )
if not, is there anyway to find the list of infopackages which has data selection?
Thanks,
Ravi

Hi Ravi,
what do you mean exactly?
if you are in SE16 or SE11 in the selection screen, you can enable these fields for the selection via menu Setting / fields for selection; then mark FIELDNAME and IOBJNM.
then enter OBJVERS = 'A'
and e.g. IOBJNM = 0CALDAY
or double click in the input box of IOBJNM and select "not equal to" and leave the input box empty in order to see all IPack with a selection on any IObj.
hope this helps otherwise pls let me know
Olivier.

How can i get iPad calendar/contacts style for my iMac (lion)?

how can i get my iMac (10.7.4) to use the VERY HANDY, MUCH FASTER iPad style calendar & contacts views?
iPad3/new iPad - date bar w/ months & arrows at the bottom, day-week-month-year- & LIST option at top - THIS IS QUICK!!!
iMac -sloowwww flip a month - OR click to view months - click here to view date..... even adding a month bar to quick click at top would be faster.
it's also like this w/ contacts -
iPad3/new iPad- QUICK alpha tabs on side that show name on left w/ info on right w/ QUICK contact options to message, FT, share.
iMac contacts - groups/or all - scroll to find/click names or search - no quick contact tabs like the iPad.
Does anyone know how to incorporate the FAST features of the iPad3/new iPad to my iMac?
Lack of these options must be an oversite and hopefully an update will soon be comming out implement these quick features across the board on all apple devices?!?! Until then - any ideas?
Quick, userfriendly... we all want that!

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

I don't know how to put an image instead of colours for background

I am usin awt and I want to put an image from my HD as background instead typical colours. How can I do this?

Ah. This one is mine. You can try making a Frame anonymus class and overriding paint(). Do you know how to get your picture?
{=^)

How to put a report which contains code for BDC in background

Hello Experts ,
Please provide your valuable opinions on following issue,
My BDC execution is taking longer time and it gives time out error. To avoid this problem i have created a separate report which l contains the BDC code (Call transaction ) and i have put this report for background execution. But upon doing this My BDC code is not performing the transaction call which it was performing when it was executed individually. In sm37 it shown the job that i am creating but nothing is actually happening as a result of transaction call.
The code that i have written is :
RFC code
SUBMIT ZREPORT AND RETURN.
RFC end
Z_REPORT .
PERFORM open_job.
PERFORM get_print_parameters.
PERFORM job_submit. here in Submit i have specified the another report name(zbdcreport) which contains the actual logic for bdc
PERFORM job_close.
Report END.
zbdcreport
The call transaction is as follows :
( CALL TRANSACTION TCODE USING BDCDATA
                     MODE   'N' "CTUMODE "N
                     UPDATE 'S' "CUPDATE "S
                     MESSAGES INTO MESSTAB .)
end zbdcreport
Can anybody provide the reason for the error .
Regards,
Uma

Hi
Check the code using this...
DATA: number           TYPE tbtcjob-jobcount,
      name             TYPE tbtcjob-jobname VALUE 'JOB_TEST',
      print_parameters TYPE pri_params.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
    jobname          = name
IMPORTING
    jobcount         = number
EXCEPTIONS
    cant_create_job = 1
    invalid_job_data = 2
    jobname_missing = 3
    OTHERS           = 4.
IF sy-subrc = 0.
SUBMIT submitable TO SAP-SPOOL
                    SPOOL PARAMETERS print_parameters
                    WITHOUT SPOOL DYNPRO
                    VIA JOB name NUMBER number
                    AND RETURN.
IF sy-subrc = 0.
    CALL FUNCTION 'JOB_CLOSE'
      EXPORTING
        jobcount             = number
        jobname              = name
        strtimmed            = 'X'
      EXCEPTIONS
        cant_start_immediate = 1
        invalid_startdate    = 2
        jobname_missing      = 3
        job_close_failed     = 4
        job_nosteps          = 5
        job_notex            = 6
        lock_failed          = 7
        OTHERS               = 8.
    IF sy-subrc <> 0.
    ENDIF.
ENDIF.
ENDIF.

How to put video files on external drive for Final Cut Pro?

Sorry for the stupid post, but I'm on day one of trying out final cut pro. (Tired of the very limiting imovie) I have a Sony HD video camera and a Go Pro HD camera. I want to store all my video on my 1TB external drive and edit from it. How do I set that up? I'm not up on the lingo that's used in the program, nor can I figure out how to do this so far.
Thanks in advance.

Hiya mate, first off no such thing as a stupid post. Better to ask if you're not sure!
There are a lot of variables to think about, what codec you want to edit in, i.e. HDV, IMX, ProRes then there's frame rate, 25, 29.97 etc. Best practice is to work native to with the codec you've shot. i.e. if the camera is HDV ingest at HDV. If you want work at a higher codec, ingest or transcode to that codec then work with it in FCP. FCP works best with all assets at the on the same timebase and codec.
You also have to think about disk speed and bandwidth from the external HD to Mac. FCP will only be able to handle 'x' amount of streams and layers depending on the codec.
Anyways...bsck to the question at hand. Im not sure what camera you have shot in but if its HDV you easy set up to set your project to HDV/PAL/NTSC/25/29.97, then set your scratch location to the external drive, and then save your project (make sure you have named it correctly as the scratch location aka capture scratch folder, will be named with the same name as the project). Connect up the camera over firewire then go to log and capture (cmd+8) and ingest.
Hope this helps!
Regards,
SJ

How to put Dynamic Query description based on the Input selections?

Hi All,
I have a requirement wherien there will be 4 input selections for a report namely A, B, C & D alongwith Fiscal year period. wherin Fiscal Year period will be mandatory field
Now, the output of the report should show the description of the report as follows:
For E.g: if Fiscal year Period = 011/2011
When User Enters input value for 'A', then report nameshould be displayed as A 011/2011
When User Enters input value for 'B', then report nameshould be displayed as B 011/2011
When User Enters input value for 'C', then report nameshould be displayed as C 011/2011
When User Enters input value for 'D', then report nameshould be displayed as D 011/2011
Please advice if this requirement is possible and if yes, please guide me how?
Thanks& Regards
Sneha Santhanakrishnan

change the code as below and see
WHEN 'ZREP_DESC'.
data: wa_data TYPE rrrangesid.
      CLEAR : wa_var_range.
      READ TABLE i_t_var_range INTO wa_var_range WITH KEY vnam = 'ZVALUE'.   "ZVALUE is variable for A,B,C,D field
      l_no = wa_var_range-low.
      CLEAR wa_var_range.
      READ TABLE i_t_var_range INTO wa_var_range WITH KEY vnam = 'ZFISCPER' iobjnm = '0FISCPER'.
      IF wa_var_range-low IS NOT INITIAL.
        gv_var = wa_var_range-low.
concatenate l_no gv_var into wa_data-low
      ENDIF.
      wa_data-sign = 'I'.
      wa_data-opt = 'BT'.
      APPEND wa_data TO e_t_range.
ENDCASE.

How to set a shared calendar 'read only' for SOME users in ML server

I am setting up Mountain Lion Server and wish to set up a series of calendars to be used by a studio of approx 20 people - two calendars will show the kind of thing I'm trying to achieve.
Calendar A shows appointments and meetings - it can be viewd and edited by all
Calendar B shows who is taking leave and when - it can be viewed by all, but edited by only a small group of people
What is the best way to set this up? On The earlier version of the server we had set up calendars on the server and delegated - this is not possible on Mountain Lion Server.

I don't think you can do this strictly by personalization since you need to use SPEL, unless the attribute you will be using for the display to control readonly is already present in the VO. Basically you need to check a value, say Supplier, and have another attribute say readOnly, tthat is set to TRUE if the supplier equals your desired supplier and FALSE for all other suppliers.
Regards,
LC

How do I attach a calendar icon to a date field? Is it not default?

I expected to see the calendar icon when I used the date field in FormsCentral. I thought it would be the default option.

This FAQ explains what features are not supported in PDF: http://forums.adobe.com/docs/DOC-2013
Randy

Can't figure out how to put a Line "-" over and "E" for pronunciation...

I can see how to do it for other accent marks but not for the straight line.
Using Appleworks, I would like the "E" in "TELA" to have a line "-"over it, so it is pronounced properly.
I have been at this for at least two hours.
Any suggestions?
thanks
Powerbook Mac OS X (10.4.6)

One could use the Equation Editor to construct any character under a bar quite easily. Launch Equation Editor from the Edit menu. Choose a font that matches your text and set the style to "text". Begin typing your word. When you get to the letter(s) requiring the overbar, select the overbar from the appropriate dropdown menu (the one you want is just right of center in the bottom row), then type your character(s). Hit the right arrow one time (and you'll probably have to reset the font style to "text" again) and continue typing your word. Close the Equation Editor window to place the entry into your document.

How to put up a calendar in VI for date selection?

Similar Messages

Maybe you are looking for