How to put vertical Scroll Bar on the LEFT side of a VBox?

The default is on the RIGHT side. It seems no easy solution on this question.

Hi Darren,
Thanks for your reply. I've narrowed the problem down to this strange behavior only happening when the viewport component is a tree-table (a JTable with a JTree for a column renderer). The tree-table works okay in JDK 1.3, but not in JDK 1.4. When I remove the JTree column renderer, the table draws correctly, but without the tree. It looks like the viewport position is being set wrong somewhere.
When a column is resized, an AdjustmentEvent is created. So that's why resizing the column looked like it had the same effect as the horizontal scroll bar.
If you're interested, then I will be happy to let you know how I fixed it, if I can.
The complete code that creates the scroll pane with the vertical scroll bar on the left is below. There's too much code to post the JTree column renderer.
Thank you,
Don
m_leftScrollPane = new JScrollPane(m_sourceTable,
JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
JScrollPane.HORIZONTAL_SCROLLBAR_ALWAYS);
m_leftScrollPane.setComponentOrientation
(ComponentOrientation.RIGHT_TO_LEFT);

Similar Messages

  • Firefox crashed yesterday and today it opened with the scroll bar on the left side, not the right. How do I fix this?

    Firefox crashed last night as I was closing it down. Today, when I started up my laptop and opened firefox, the scroll bar was on the left. I'm not sure how to move it back to the right side of the page.

    RichTQ wrote:
    just yesterday i have lost connection with the Vodafone network.
    Have you contacted Vodafone ?

  • Freeze column headers in a table and enable vertical scroll bar on the rows

    I have seen demos of BI Publisher running an html view of a report that displays a table of data with a vertical scroll bar on the table. The table header is always visible as you scroll down on the rows of the table. Any idea how this is achievable?

    Hi,
    Have you find a way to do this? Im looking for the exact same thing!
    Where did you see this demo?
    Br
    Magnus

  • Removing the Vertical scroll bar from the content area.

    Hello,
    Is there a way to remove the vertical scroll bar from the content area?
    I am trying to create a new light portal frame work.
    Everything works fine except that I see two vertical scroll bars, one from the content area and another from the page(frame).
    Thanks in advance.
    -Sudheer

    Hi
    There are a couple of ways in which to achieve this
    1) Try and make the content flat. What I mean by this is that the content area (when using the standard light framework) doesn't contain an iframe, meaning that the iview defined on the page has "EMBEDDED" isolation mode. This should mean that you only have one scrollbar (if the content extends past the size of the browser)
    2) If you need to make the iview URL isolation, then try and get the domain of the content to be of a similar domain to your portal server, i.e. your portal is portal.company.com and the content is content.company.com. In this way you can make the pages expand.
    NOTE: One thing to note is that when using URL isolation iviews doesn't allow the automatic expanding of the iframe content. This is because the standard javascript doesn't allow this. Therefore you may have to write your own javascript function (or content area page) to do this
    I hope this helps
    Darrell

  • Vertical scroll bar for the table

    Hi,
    I have a table which will contain more than 100 rows. First Visible rows will be 10.
    i want a vertical scroll bar for the table, so that i can see all the rows using vertical scroll bar. While scrolling down, the header row, which contain names of the column should be static (ie visible even scroll down) and the footer of the table should be visible even goes up.
    If I use Scroll container, it will take whole table and the header row, row with name of column will move up invisible when i scroll down. So it is not useful if i use scroll contatiner.
    I need a fnctionality were table has a vertical scroll bar to it.
    Thanks
    Maha

    Hi,
    Your requirement is one of the default properties of the Table UI element in NWDS CE version.
    Regards,
    Alka.

  • How to get a scroll bar to the applications popup by default?

    How to get a scroll bar to the applications popup by default when clicked the applications folder from the dock? If I have so many applications that they do not fit in the default area, I have to find out myselft that I have to scroll the content before the scroll bar appears. This leads to "where is my missing applications questions" by the novice users with Mountain Lion.

    System Preferences > General > Show scroll bars.
    Click the button by the side of "Always".
    Best.

  • HT1338 How do you consistently get the scroll bar on the right side of the page

    How do you consistently get the scroll bar on the right side of the page.

    Go into System Preferences, select General and set "Show scroll bars" to "Always".

  • Why is the scroll bar on the left?

    I had to do a systems restore (using Vista) and now the scroll bar is on the left; it used to be on the right. If I use IE9 the scroll bar is on the right. What happened.

    Set the pref layout.scrollbar.side to '2' to place the scroll bar at the right side.
    See http://kb.mozillazine.org/layout.scrollbar.side (default is 0: user interface)

  • HT3819 How do I turn on homesharing on iPad? I do not see the menu bar on the left side in iTunes. Thank you in advance

    How do I turn on homesharing on iPad? I do not see the menu bar on the left side in iTunes. Thank you in advance

    Home sharing support
    http://www.apple.com/support/homesharing/
    Understanding Home Sharing
    http://support.apple.com/kb/HT3819
    Troubleshooting home sharing
    http://support.apple.com/kb/TS2972

  • The new Pages in Mavericks OS:  How can I get a ruler down the left side?  When I click on "Show Rulers,"  all I get is a ruler at the top.

    In the new Mavericks OS, when I use Pages, I cannot find a way to get a ruler on the left side of the document.  When I click on "Show rulers," all I get is a ruler at the top of the document.  How can I get a ruler on the left side?

    Wait for an Apple update to Pages which is suppose to put the vertical ruler feature back in.

  • When I render my video I get a black bar on the left side of the screen

    I just upgraded to FCS 2 and so far it's been a complete waste of money. I'm having nothing but problems with FCP, Compressor, and QMaster. I will just post my FCP problem here.
    I've edited a weekly video podcast and everything looks great, until I render it and export it. When I render it, I get a constant, solid black bar on the far left of the video that takes up about 5% of the screen. My layers are definitely sized correctly to fill up the entire canvas, and they are all centered. I cannot figure out why I am getting this black bar or how to get rid of it without ditching the upgrade and going back to FCP5.1.
    I have already tried completely uninstalling the FCS suite and reinstalling. No luck. Any help would be GREATLY appreciated.

    Thanks for the reply.
    My original source material is in Apple Intermediate Codec, with 32-bit float audio and a variable frame rate. This has not been friendly to FCP, so I use Quicktime to convert it to Apple ProRes with 24-bit audio and 29.97 frame rate. This is what I import into FCP.
    My sequence settings are set to the same specs as my source material. 854x480, square pixels, no field dominance, Apple ProRes compression.
    The black bar on the left side of the screen shows up before I even export. It shows up when I render everything.
    I am exporting with Quicktime Conversion to:
    MP4
    h.264 codec
    720x405
    1000 video bit rate
    Main Profile
    No cropping/filters or anything.
    The ONLY thing I did different before upgrading to FCP6 was that I used Apple Intermediate Codec all the way through. I was told by an FCP instructor that writes and publishes all kinds of FCP training material that I should upgrade to FCP6 and use the Apple ProRes422 Codec instead, so that's what I'm trying to do.
    I am going back to restart my project using Apple Intermediate Codec all the way through like I used to, but it will be awhile before I can tell if that solved the problem. Either way, I would like to be using the ProRes codec....
    Thoughts?

  • Vertical scroll bars remain the older OSX pill type (pre 10.8) in Firefox on OSX 10.9. How can I fix this?

    The Firefox installation on my iMac (2009) spans at least 3 operating systems. I recently updated to OS X 10.9 from 10.6.x but the scroll bars in Firefox are not the default OSX 10.9 but the older 10.6 ones. There are 4 other users on this computer and their scroll bars are the correct ones. Resetting my profile and full re-install has not corrected this problem. I have used Firefox since OSX 10.2 and transferred my profile from an older Mac to this iMac some time ago. This is probably some bit of code or style or something from some theme that was installed under 10.6 or earlier that needs to be removed. I have not tried the nuclear option of completely deleting my profile and hunting down every preference related to Firefox or Mozilla in my account. This is not so much a problem as an irritation.

    Thanks for the suggestion, but no go. Some bit of an old Mozilla/Firefox theme or some other 3rd party OSX utility is stuck somewhere. Like I said, more an irritation than a problem, doesn't effect the performance of the browser--its just weird.

  • How to get vertical scroll bars for a window?

    hi All,
    i have a window in my smart form ( not main window ) . it displays long text of a PO header. since user can enter huge amount of long text i want to enable vertical scroll bar in smart form window so that it shows all the long text.
    How to enable that for a window in smart form? any pointers would be highly appreciated.
    Thanks,
    Sreekanth.

    Hi
    Only the main window can have a dynamic heigh, all other windows have a static size: so u make sure the long text can be displayed in the window .
    Max

  • Vertical Scroll Bar on the device display

    Hello,
    I had the problem with both horizontal and vertical scroll bars. Managed to get rid of the horizontal scroll bas using the parameters ~itsmobileelemfactor and ~itsmobileelemunits but the vertical scroll bar is still there. As our transactions are developed internally, I managed to sqeeze the screen elements but still the vertical scroll bars are there.
    I am testing with Intermec CK3 device with Intermec Browser.
    I was going thru this forum and someone has suggested to modify the CSS.
    Can someone help me which html parameters are required and under which css class e.g. font size, line-height etc to reduce the overall screen size? I am not good in HTML.
    Thanks in advance.
    Regards
    Narottam

    Hi Oisin,
    Parameters in SE80:
    ~GENERATEDYNPRO = 1
    ~ITSMOBILE = 1
    ~SOURCES = ZZITS_IB_LM00,ITSMOBILE01,ITSMOBILE
    ~THEME = 99
    ~TRANSACTION = LM01
    Parameters in SICF:
    ~ITSMOBILE = 1
    ~TRANSACTION = LM01
    ~THEME = 99
    ~SOURCES = ZZITS_IB_LM00, ITSMOBILE01,ITSMOBILE
    ~POPUPS = 1
    ~WEBTRANSACTIONTYPE = EWT
    ~ITSMOBILEDEVICEINCLUDE = ZZ_IBROWSE
    ~ITSMOBILEELEMFACTOR = 8
    ~ITSMOBILEELEMUNIT = px
    I know you helped me earlier and provided two OSS notes. Those nores are installed.
    Again, please let me know what I am missing to get rid of the vertical scroll bar. Strictly we have followed 16X20 screen size which is SAP RF standard.
    Regards
    Narottam

  • Table Grid resizing,How to avoid getting scroll bar in the browser

    Hi All,
    Requirement is to enable Grid Resizing feature in the Table UI element. The table will have  approx 12-30 columns
    For providing this feature on the table UI element, we have set the following properties
    'ScrollableColCount' Property of table UI is set to -1.
    'Resizable' property of each column is set to true.
    This will remove the scrollbar at table level and all the columns will be shown on the screen at one time.
    Problem encountered:
    1. Horizontal  scroll bar will be introduced on the screen.We tried giving width in pixels  to individual column grid but unable to eliminate this scroll bar in the screen.   
    2. Also the resizing properties modified for a table grid will be applied on the similar task screen having table UI element.
       For Example: In GP Workflow,if USer1 holds 2 task(Task A and B) of an application. If he resizes the column of the table in A task then these changes will be reflected in the B task table UI also.
    Please provide pointers on this.
    Thanks and Regards,
    Pradeep

    Hi,
    In table set tablecellEditor wrapping property to true,by default its false.
    By this you can get value in many rows(per row size is depend on whatever u have given for column width).
    this way you can avoid scroll bar.
    Regards
    Trilochan

Maybe you are looking for

  • How do i find my ipod that has NO battery?

    I had been studying for some tests i had and doing homework and i had no time to charge my ipod 5g. Its dead so there is no wifi or gps or anything like that. I was wondering if there is an app to find it and that i did not have to install beforehand

  • Getting images from the web

    When I copy an image from the web and paste it in AI the URL is inserted and not the image.  How do I change that?

  • AP Fall back issue for WLC

    Hi, i have two WLC 4402 with same ios 4.2.99.0 & configured fail over based on below link http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008064a294.shtml#c5 AP failover occurred but the fall back option like prima

  • Label Printer - to print a colored strip on a label

    I am looking for a printer, which could print labels with color coding. Let me explain, what I am trying to acheive.. 1. I should be able to print labels, - labels of size 4 X 6 IN, or 3 X 2 IN or any sizes of label -- > the label is not colored, jus

  • OraInstall timestamp folder gets created daily at /tmp + GridControl.

    i have a environment with oracle 11g grid control and in few servers exactly at midnight everyday orainstall<TimeStamp> directories are getting created. So i think daily there is some kind of silent install getting triggered. so i have checked deploy