How to put your number on a disconnected iPhone

How can you put your old number back on your discontent iPhone ?

You take your unhappy iPhone to your carrier and have them assign your old phone number to the device.

Similar Messages

How to put your PS3 or PS4 into a DMZ

Hello!
You're most likely here because you've thrown something out of your window in frustration at being randomly booted from an epic game of Modern Warfare 2. It's no fun, we know. But we're here to help you out...
Most problems like this can be resolved by placing your PlayStation 3 Console in a De-Militarised Zone (or DMZ). This means that your router will not block any internet traffic to your console, leaving you free to breathe the open air of MW2 multiplayer goodness. Ahhh....
Placing your console in a DMZ is not a difficult thing to do, but you will need to set aside half an hour to get to grips with the process - and you'll need administrator access to your router.
First things first, turn on your console and go to Settings > Network Settings.
From here, you can change all the bits and gubbins which help your PS3 connect to the internet.
You will need to give your PS3 a static IP address. IP addresses are like street addresses, only for your internet network. A static IP address will ensure that your router always knows where it can find your PS3.
To do this, first you'll need to go to the Settings and Connection Status List and make a note of 2 numbers:
1. The 'IP Address'
2. The 'Default Router'
Once you've got these, back out of this menu and go to the Internet Connection Settings menu. From here, follow these steps:
1. Select 'Custom'
2. Select the type of connection your using (If your PS3 is plugged in to the router, select 'Wired', if not you're using a wireless connection, select that intead.)
3. If you selected wireless, set up your connection as normal untill you get to the IP Address menu.
4. If you selected wired, select 'Auto-Detect' at the next screen and continue to the IP Address menu.
5. At the IP Address menu, select 'Manual'.
Remember those numbers you marked down earlier? Here's why you noted them!
You'll now see a screen with 5 options:
IP Address
Here, you need to input the number you noted down earlier. However, you should change the last group of 3 digits to something else. Your safest bet is to increase this number by 50 and use that. So, if the IP address you noted earlier was 192.168.0.50 then your new IP address would be 192.168.0.100
Note that the numbers here only go up to 255, so use that as a maximum if you need to. Be sure to ONLY change the last group of numbers! Make a note of the number you decided to go with.
Subnet Mask
This is almost always 255.255.255.0, don't change this unless you have a specific reason to do so.
Default Router
The second of the numbers you wrote down, all you need to do here is input the IP address of your router.
Primary DNS
This bit is super easy. Remember the number you placed in 'Default Router'? Whack it in here again!
Secondary DNS
You don't need anything at all here, unless you have a specific reason to input a Secondary DNS.
Once you're done here, make sure to make a note of the IP address you entered at this menu and hit right on the d-pad to advance.
6. For MTU - select Automatic
7. Do not use a proxy server, unless you have a specific reason to use one!
8. UPnP - it's usually a good idea to enable this, but if you have voice comms trouble after using this guide, try disabling it.
9. Review the settings and test the connection!
Now, don't panic. Your PS3 may scream at you that it cant connect to PSN. In the words of Revolver Ocelot, "We're not finished yet!"
Your next task is to log on to your router as an administrator. Check your router's manual for details on how to do this (alternatively, google is your friend).
Somewhere in the plethora of settings and techy bits that make up your router's menu will be an option to assign a 'DMZ'. I cant point you directly to this since every router differs, your best bet is that good ole' friend google.
Once you find it, you'll be asked to input an IP address for your DMZ. Here, you need to put in the IP address you gave your PS3 earlier, the one you noted down after step 5 of this guide. Once you've done that, save your settings, wait for your router to sort itself out, then dance a bit - you're nearly done.
Troop over to your PS3 and go back into Network Settings. From here, select Internet Connection Test. If all has gone swimmingly, your test will be successful and your NAT Type will read '2'. Hurrah! Your console is demilitarised and has nothing to fear from aerial bombings* or multiplayer connection troubles.
If it fails, something has gone horribly wrong. Maybe terrorists intercepted your traffic and changed an IP address whilst you weren't looking, or maybe you forgot something. Fear not - post in this thread with the results of your internet connection test and our lovely community will do their best to help you out.
Enjoy!
MusterBuster.
*I cant guarantee your PlayStation will survive an actual aerial bombing. Sorry bout that.

gazzagb wrote:
"De-Militarised Zone" sounds a bit scary lol. So "your router will not block any internet traffic to your console" but what does that actually mean? Could someone hack your PS3 or something? Are there any other benefits of putting your PS3 in DMZ?
We're yet to hear of anyone hacking a PS3, no one has ever done it from over the internet, and we're pretty confident that no one can.
Mind you, coming from me that will sound very biased! But perhaps our community members can reassure you that this is safe?
My PS3 is in a DMZ, if that'll reassure you
The benefits are that your side of gaming wont cause any connection problems. What it cannot do is protect you from dropouts/disconnects from users who are connecting from behind a ridiculously secure network.

How to put a number on reject list from iPhone 4?

How do I put a number on reject list so when that number calls it does not ring or alert? Or maybe just go straight to voicemail.

That's not a function of your phone. You can contact your carrier and see if they offer blocking features (all do in the U.S.). If it's a specific number you can simply assign a customer ringtone of silence to it.

How to put your i-pod 2nd gen in passcode mode or how to never go back there!

I do not like the enter passcode mode!

Go to Settings>General>Passcode Lock and turn it off. There is no way to prevent someone from turning it back on if the iPod gets out of your possessing.
For a
Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
However, many apps have been updated and the updated apps are no longer compatible with a 2G

How to put profissional number of doctor in tcode CBIHT22

hello masters, i have to put the professional number of doctor and im trying to do this in tcode CHIHT22... but i don't know where to put professional number. could someone help me or tell me another tcode to put this number.
regards and thanks in advance.
Mário

You have not stated what portal you are using. What you will need is a portal container e.g. Pluto, Jetspeed to manage the portlets:
Pluto: http://portals.apache.org/pluto/
Jetspeed: http://portals.apache.org/jetspeed-2/
These are Apache projects but there are alternatives out there e.g. Liferay, iPoint, JBoss Portal, StringBeans and commercial offerings including one from Sun. All of these have a management portlet (or similar) enabling you to control your portlets.
You will also need to do is lookup the spec for JSR168 as a reference document: http://www.jcp.org/en/jsr/detail?id=168 . Pluto is the reference portal JSC uses when building portlets but is not suitable for a live environment.
I am currently using JSC to create portlets which will be (hopefully) using the JBoss Portal. I will warn you now, that you will need to do some extra work to make your portlets work in certain portal containers even if they say its JSR168 compatible. I have discovered certain components don't quite work as well in JBoss portal as they do in the JSC/Pluto setup, but it can be fixed with a bit of lateral thinking.
Fortunately it is not a difficult task to make JSC portlets work but you may have to look for the info depending on the container. I picked JBoss as the management of the portlets was, I found, easier to figure out than others as well as having good documentation but the downside is that it is framework on which you put your portlets rather than have ready-to-use portlets. It is a case of trying them out and finding which one you feel comfortable with.

How to put both number and char in values?

Hi ,
Cud anyone tell me how can i put both number and char value in one colun. Such as i want to put ..(A121)..in REFNo column . so it includes both number and char .how can i do this?

Hi,
If you will ever want to treat the numeric part of refno as a NUMBER, then I suggest you store the values in two separate columns, refno_alpha and refo_num. For example, if "ORDER BY refno" should produce:
A1
A1.1
A2
A10
A11
A100
A121
B1then it will be easier to have two columns.
When necessary, you can always combine the two columns (using "refno_alpha || refno_num"). You can create a function-based index and/or a view with that expression if it helps you.
Also, as William said, validation is easier if the numbers are separate.

Putting your number on its own plan

i am on a family plan and want to know how i can put my phone on its own plan and not be part of the family plan anymore

@zachm89
It sounds as though you want to become independent from the family plan you're currently a part of! I would love to provide more information on the process of assuming liability of your line. http://bit.ly/RI6Tyh Let me know if you have any further questions or concerns. Thanks!
AnthonyTa_VZW
VZW Support
Follow us on Twitter @VZWSupport

GUIDE: How to put your iPhone into Recovery/DFU Mode

As most iPhone owners will be aware, you can reset your device by holding down both the home button and sleep/wake button together until the device reboots. This will cure the majority of crashes and issues.
However, there may also be occasions where the phone goes seriously wrong and may appear to be 'dead'. Not everybody is aware that there is a second method which can be used to bring a phone back to life when all else seems lost. Consider it a 'last resort' if you like!
The second method involves putting the phone into recovery, or DFU (Device Firmware Update) mode. Putting the phone into recovery mode lets iTunes know that it needs to perform a full restore on the handset. Here's how to do it:
1. Ensure that the iPhone is OFF before starting.
2. On your computer, open iTunes.
3. Connect your iPhone to your computer using the USB cable.
4. Hold down the SLEEP/WAKE Button and the HOME button together.
5. After 10 seconds, let go of the SLEEP/WAKE button (keep the home button held down).
6. Keep holding the HOME button until iTunes displays a message saying that it has detected a phone in recovery mode.
You will then be prompted to restore the phone using iTunes. Follow the on screen instructions and your iPhone will be restored.
You may also have the option to restore your iPhone from a backup, but I would not advise doing this if you think that an app may have caused your device to go wrong in the first place.
The above method can also be used to get around forgotten PIN numbers. I've used it to restore several of our company handsets when people have handed their phones back in but forgotten to provide their PINs!
I hope this helps. If anyone reading this needs a hand, just drop me a message and I'll be happy to talk you through it
Mark

MI5 wrote:
Last one I did asked me to log in with original apple ID after I'd restored the firmware.Weird? The only thing I can think of is that the staff who had the iPhones didn't use an Apple ID, but then they must have done as they would have needed to have downloaded a couple of apps for work! We'll call it an 'anomaly'..

How to put your money from one apple ID to a different apple ID

does any one know how to do that if u do pls help

Click here and ask the iTunes Store staff to put it back onto the card; they'll only do this if none of the balance has been spent.
(100931)

Can anyone tell me how to put your backup discs on i tunes

i have back up discs with songs on it and i cant seem to put them back on my i tunes. can anyone help me

i have the music already backed up im just trying to restore it, it doesnt work. how can i do this

How to put your ipod in recovery mode

how do i put my ipod in recovery mode because i forget my password

See:
iOS: Unable to update or restore

Photoshop: how to put your page in the middle

i've made my first page of my new website with photoshop cs2
but i want to see it in the middle when i use IE or firefox
how can i do that with dreamweaver
my page
thanks a lot

Table height is invalid HTML.
There is no align center option for an image.
Your code will give horizontal but not vertical centering. To
get valid,
vertical centering, read this -
http://www.apptools.com/examples/tableheight.php
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Pay Low Books!" <[email protected]> wrote
in message
news:f47f99$e9c$[email protected]..
> Your page contains the photo only. Do you want to make
the photo in the
> middle?
> Here is how to do it in Dreamweaver CS3:
> Because your page looks like it contains many photos
when I tried it in my
> Dreamweaver, so you should select the whole image by the
mouse. At the
> bottom
> of Dreamweaver, you will find properties window at the
bottom.
> You will find Align optin, choose Center from options
beside it.
> Another way, you can do it through HTML.
> Using Dreamweaver, look at the code by selecting
clicking on Code on the
> left
> up corner in Dreamweaver. If you wrote this page, you
will find HTML table
> tags.
> If you did not, look for this:
> <table width="901" height="601" border="0"
cellpadding="0" cellspacing="0"
> id="Tableau_01"> in your code.
> Inside this tage add Align="center", so it should look
like this:
> <table width="901" height="601" border="0"
cellpadding="0" cellspacing="0"
> id="Tableau_01" align="center">
>
> I hope my answer is helpful!
>

How to Put Serial Number in "UUT Information" Screen

Hi guys!
I'm reading the Serial Number using a Cemera and a 2D code on Units, and I would like to put the serial number in the corresponding box of "UUT Information".
At this time I'm puting the serial number on Report using "RunState.Caller.Locals.UUT.SerialNumber".
I need to keep the "UUT information" screen on front.
Thank you

When I click "Next UUT" (without a serial number on the box), I'm reading the serial number using Camera and LabView signal procesing, I would like to write the readed serial number to UUT information Box...
It's any way to do that without modify and overide the PreUUT?
Thanks

How to put music library files onto new iPhone 6 with iTunes

I set up my new iPhone 6 on my Macbook Pro for backup to the cloud using wi fi. I also set it up as a phone, not as an ipod. But when I synced the phone, no music library files copied onto the phone, which has 128 gigs, only reference graphics showing an iCloud icon, so I have to play everything by streaming from a hotspot or using cellular data. How do I just put the music library on the phone?

Thanks! Fascinating, but playing the very same files for the first time through my car's stereo system, the volume required was much lower and the sound was much better. I think the old 4s must have been deteriorating, or the new 6 is far more powerful and better.

How i put my backup of the old iPhone in the new 4s??

I had the Iphone 3Gs and now I bought the new 4s. How can I transfer my backup of the old 3Gs on my new 4s?

Once again thank you for your eagle eye .I was aware of no computer .I generally do read the OPs carefully
I was referring to itunes on the device as was the App store .I do believe they are the correct terminology and since the OP has no computer would know of nothing else
It is so good to feel you are watching over me and my posts Thank you again

How to put your number on a disconnected iPhone

Similar Messages

Maybe you are looking for