How to QA the RAC setup

hi ,
EBS R12.1 + RAC
OEL 5.4
We have just outsourced(thru Oracle local support) the installation/migration/conversion of our EBS R12.1 from single node to RAC.
The setup/config is:
apps tier is on node1(apps2), and
the db tier (RAC) in on node2(rdbms1) and node3(rdbms2).
The support followed note 466649.1 in configuring/upgrading/migrating the EBS to RAC.
After that they showed to us that RAC was successfully configured, and also the PCP (parallel concurrent processing). The EBS apps is also running successfully connecting to the RAC db tier. The showed to us the apps "dashboard" that confirms everything set-up. This is the screen shot of the dashboard.
http://rapidshare.com/files/419559694/RAC_setup.JPG
Applications System Status
Host      Platform           Host Status      Admin      Database      Concurrent Processing      Forms      Web
APPS2      Linux x86-64 (64-bit)      check          check     blank          check               check     check
RDBMS1      Linux x86-64 (64-bit)      check          check     check          check               check     check
RDBMS2      Linux x86-64 (64-bit)      check          check     check          check               check     checkWe are left to test and do some maintaining of the systems.
My question is, (since we do not have the capacity to QA the setup or validate, because we do not have experience on RAC).
Is the output of the dashboard correct?
What are the list of things to do or check when you maintain a RAC EBS SYSTEM?
Thanks a lot,
Ms K

Hi user;
Please check below notes
RAC: Frequently Asked Questions [ID 220970.1]
RAC Assurance Support Team: RAC and Oracle Clusterware Starter Kit and Best Practices (Generic) [ID 810394.1
Regard
Helios

Similar Messages

How to configure the Easy Setup to match the sequence type for playback

Plesae provide some suggestion for how to configure the Easy Setup in FCP 6.05.
*Uncompressed HD 8-bit (1920 x 1080p30)video streams
e.g:
1. Choose Final Cut Pro > Easy Setup.
2. Choose ?? from the Format pop-up menu
3. Choose “all rates” from the Rate pop-up menu.
4. Click the USE pop-up menu, choose which format?
Also how about Uncompressed SD 8-bit (720 x 480p30) video streams ?
Thanks,

Thanks for the advice.
In the project, I created two sequences.
Import all my HD 8-bit clips into sequence 1, and say yes to mach the format
and import all my SD 8-bit clips into sequence 2 and say yes.
In Sequence-> setting-> I verified the configuration as following:
However, that is "Load sequence preset" button, I am not sure what is that for and also do I need to go to Final cut pro -> easy setup to configure the format again?
I just want to playback all my HD clips to make sure no dropped frame and
then playback my SD clips sequence to make sure the performace are OK.
Here are the format for HD clips:
HD 1920x1080 HDTV 1080i (16:9); upper; uncompress 4:2:2.
Here are the format for HD clips:
SD 720x480 NTSSC DV (3:2), NTSC-CCIR601, lower , uncmpress 8-bit 4:2:2.

HT1430 how long does the configure setup take when u first turn on the IPAD? mine seems stuck at the language choice. HELP

How long does the configure setup take when u first turn on the IPAD? Mine seems to be stuck in the language choice. Help!

It should not be stuck at the language choice. Is there a "Next" button in the upper right corner? Or a blue arrow pointing to the right?

How to perform the hardware setup without the CD?

In most of the support page I read, I am finding info about drivers and computer connectivity with the printer. In many occasion, we can read a paragraph like this one:
Important: Set up the HP hardware before installing the software. If you have not already done so, find the hardware setup document for your printer before starting the following steps.
Excerpt trom http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02273853&tmp_task=setupCategory&cc=us&dlc=en&lc...
This is exactly what I am trying to achieve, but nowhere HP seems to be providing guidance about this. At least that I can find. Where can I find the bundle to download that will allow me to connect the prionter to the WIFI network? Note that the automatic connection WPS generates an error on the printer. My router is a bran new Linksys EA6350.
Please do not refer me to the driver download page, this is not what I am looking for.
Thanks,

New plan... I have done some reaserach and may have found a way!
We will put the computer on the printers network, and then print a report to get the printers IP address. At this point we can access the embedded web server (EWS) and run the wireless wizard from there. Once the printer is on the home network with the router we can put the computer back on the network and vuala the printer and computer will both be on your network.
To restore network defaults - since you have done this before I imagine you know how but for others who may view the post, here are the steps
Press the Wireless button
Select Wireless Settings
Scroll down and select Restore Network Defaults. Press Yes to acknowledge
The radio will turn off (the blue LED will go out). You may need to press the wireless button again to Enable Wireless
Put the computer on the printers network (temporary)
1. Click on the Airport symbol on the top left side of the Mac screen
2. Choose the network that look relative to the printer (might say HP setup or some variation of your printer name) - it may take a few minutes for it to appear
Print the wireless network test - wait a few minutes to ensure the and computer have established an adhoc connection otherwise the report will not have an IP address
Press the Scan button (it also the Wireless menu button)
Select Wireless Settings
Navigate to Wireless test and select.
The Wireless Network Test prints, look for and note the IP address.
Open an Internet browser (Safari) and enter the IP address into the URL (address bar).
Click on the network tab, on the left click on wireless or 802.11.
At this point we are looking fore "start wizard" should be on the right hand side.
Once we have successful configured the printer for your network you can put your computer back on your own network.
Now you can add the printer to the System Preferences and print
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

How to get the Seperation setup color plates count in Illustrator 10 SDK?

Hi All,
Im using Microsoft VC++6.0 & Illustrator 10 SDK.
How can i get access to "Seperation setup " property of the document.
Actually i need to get the number of color plates inside the separation setup.
Any sample code please.
Thanks in advance
Regards
myRiaz

It sounds like you need to figure out which part of the API deals with colour separation. It could be AIDocument.h or it could be AIColor.h. I'm afraid you'll just have to check the headers until you find something that looks like you want. You could also try searching the API for a piece of text that you'd expect to find associated with the values you're trying to pull -- that might point you in the right direction.

How to list the rac databases on unix terminal

Hi guys, I am trying to find out how to list all the rac databases on the unix terminal.
the following command gives the list of all the databases running on a server
*'ps -ef |grep smon | awk '{print $8}' | awk -F"_" '{print $3}''*
of those databases i am trying to find the all the databases which are rac enabled.
I tried srvctl status database -d 'database name'
but with that i could find info on only one database at a time. So I am looking for a single command that lists out all the rac databases at a single go.
can someone please help me figure out that command
Thank You

Try:
srvctl config database

8 hrs downtime, how to do the init setup tables

Hello BW Experts,
I have 8 hrs downtime per day and i have to do the fill of 30 million records to the init setup tables. If i could breakdown each day init setup table fill based on the company code + sales org.
day 1 fill cc1
day 2 fill cc2
How what happens if someone does any records changess in the cc1 on day2. how is that captured. what is the solution.
Please explain.
Regards,
BWer

After your initialization Setup Tables you must do a Init Delta Queue for that company only.....the delta load is cummulative respecto to the init delta loads....
If yo u have three init delta one for each company ...the delta loads load the data for alll three companies at same time.....you can initialize companies one by one and load delta..
This prevents lost changes in companies that you have setting up...
I hope this helps you
Regards
Message was edited by:
Oscar Díaz

How to measure the Data setup time

I want to do a SPI timing AC characteristics.
I use labview capture a frame of SPI data package from a oscilloscope and display in a waveform Graph.
Lead time, Data setup time, data hold time... should be measured.
So, what is the next step should i do?
Thanks

Thank you, asastet.
I test the SPI module of a MCU. I have download a code to init the SPI and transfer a data package continuously.
The 4 channels of oscilloscope connected with SS, CLK, MOSI, MISO.
In labview, I capture a frame of SPI data package from oscilloscope and display in waveform graph control.
My project will automatically measure the data setup time and data hold time according CLK vs. MOSI.
Thanks.

Toshiba P875 S7102 How To Enter The Bios Setup

I have been tring everything to get to the bios screen of the computer. I have tried holding Esc, F1, F2, F10, F12, Delete, but that has not worked. I have found a toshiba manual that said to hold F2 until you see the toshiba logo then release it. Nothing has worked, it just continues to boot to windows 8.
I have searched and searched, this forum and the web, but I have not found anything that has worked to get into the BIOS setup screen.
What is the proper key stroke to get into the bios screen for P875 S7102 laptop?
Thanks.

The "secret" is what you do when shutting down before attempting to access the BIOS. Press the shift key as you click Shutdown. Then on startup, tap F2 to take you to the BIOS screen.
This applies to Toshiba laptops that came PRE-INSTALLED with Windows 8. It does NOT apply to Windows 7 machines or those that were UPGRADED from Windows 7 to Windows 8.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

How to use the RAC

We have used 9i before ,now We install the 10g RAC, but I wannt to know how to connect database by use jdbc for application .
We use jdbc:ipaddress:instancename:port before ,but now how to deal with it ?
10g RAC have two instance name, but 9i have one .

Hi, You can connect to RAC using the thin or oci jdbc, for example
thin driver without connection failover:
jdbc:oracle:thin:@//host1-vip:1521/db-service
thin driver with connection failover
jdbc:oracle:thin:@
     (DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = host1-vip)(PORT = 1521))
     (ADDRESS = (PROTOCOL = TCP)(HOST = host2-vip)(PORT = 1521))
     (LOAD_BALANCE = yes)
     (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = db-service)
          (FAILOVER_MODE =(TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 5))
oci driver:
jdbc:oracle:oci:@TNS_ALIAS
Regards,
Efrain.

How to change the header in all pages at once?

I'm new to iWeb and can't figure out how to change the headers of all pages without having to go through and do it to every page. There should be a way, but is this a feature iWeb doesn't have?

Hi,
Refer following link which states how to change the Page Setup setting (just an addition to above poster's explanation):-
http://docs.oracle.com/cd/E12825_01/epm.111/fr_user/frameset.htm?1900.html
Regards,
Edited by: 918547 on Dec 14, 2012 6:17 PM

How to reset the router?

I tryed to secure the router with the easy-link program and i want to reset the whole thing.Also if anyone know how to reset the netowrk setup from the control panel that would be great too.

What router are you using?
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: some routers have a user name of "admin" ), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

Hardware requirements for RAC Setup on Linux

Hi,
Can any body help me...We are soon going for the RAC setup on linux operating system.So,i need to provide the customer,the hardware needed for this setup.
Please send me the list of all the things right from small things....
regards,
Mohammed

Hi Mohammed,
In addition you may find good information in below doc:
http://download.oracle.com/docs/cd/B19306_01/rac.102/b28759/toc.htm
Regards,
Marcello M.

How to overcome the Memory leakage issue in crystal report 2008 SP2 setup.

I have developed the small windows based application tool with help of Visual studio 2008 for identify the memory consumption of crystal report object. It helps to load the crystal report objects in the memory and then released the object from the memory. The tool simply does the u201CLoading and Unloadingu201D the objects in the memory.
The tool will be started once u201CTest_MemoryConsumption.Exeu201D executed. The u201CTest_MemoryConsumption.Exeu201D consumes u201C9768 KBu201D memory before load the crystal report object in memory. It means, 9768 KB is normal memory consumption for run the tool.
Crystal report object initiated by the tool and object help to load the report in memory once the tool initiated the crystal report object. Now u201CTest_MemoryConsumption.Exeu201D consumes u201C34980 KBu201D memory during the crystal report object creation and report load process. The actual memory consumption of crystal report object is 34980u20139768=u201C25212u201DKBu201D.
The memory consumption u201C34980 KBu201D will be continued till the end of the process. The memory consumption will be reduced to u201C34652 KBu201D from u201C34980 KBu201D once report load process completed. It means, u201C328 KBu201D memory only released from the memory consumption. Tool enables the Release command for the crystal report object. But crystal report object does not respond to the command and will not release his memory consumption.
The memory consumption u201C34652 KBu201D will be stayed in the memory once job ends. If i again initiate the crystal report object then it crystal report object start to consume the memory from 34652 KB.
Database objects and crystal report objects are properly used in the tool. The object release commands properly communicated to crystal report setup. But the u201CCrystal report service pack 2u201D setup unable to respond the commands which has enabled from .Net Tool. Crystal report objects are properly initiated and disposed in the tool. But the crystal report unable to release from the server.
The memory consumption will be reduced once the server restarted or kill the application.
Crystal report 2008 and crystal report 2008 SP2 setup available in the server.
Microsoft .Net Framework 2.0 SP2, Microsoft .Net Framework 3.0 SP2 and Microsoft .Net Framework 3.5 SP1 are available in the server,
Could you please suggesst how to avoid the memory consumption keep increasing and how to release the memory consumption once the crystal object disposed???

Hi Don..
My case is different one. I hope, the problem with Run time Installation setup file (Crystal report 2008 Serivce Pack2 installer) which we installed in the server.
Let me explain with Live scenario which our client faced in crystal report 2008 Service pack2 Installer.
Our client is using a application to help to print their reports. The application is developed with Windows service.
Windows service keep on running in the server. Windows service executes the client 's crystal reports( Labels Report, Stock report) which designed for clients need and the reports will be printed from printer.
10 Same type report (Label Report) will be printed in 1 minute. Reports are not printing during non business hours. But the windows service keep on running. Memory cosumption of application will be 160 MB in business hours.
For Example, On Monday the application memory consumption starts with 160 MB. The Memory consumption will be reached 165 MB in peak business hours. Then the memory will be ended in163 MB in the End of Monday. It means, The memory consumption will be in 163 MB during the non business hours. Reports will not be printed in non business hours.
On Tuesday, the application memory consumption starts with 163 MB and it will be reached 168 MB during the peak hours. The Memory consumption will be ended in 165 MB in the end of Tuesday. The same process contiues till friday. End of friday, the memory consumption of the application will be ended with 170 MB.
Application Memory Consumption slowly increasing in the server. In 5 days, Memory consumption reached Threshold value (170 MB) of the server. Application gets hanged up once the memory consumption reached 170 MB. We got the error messages as "Attempted to read write protected memory " / "Not Enough memory for process". If we restart server / If we restart the service then memory consumption of application get reduced to 160 MB.
From the above scenario, We came know that the either the problem with Application object or the problem crystal report object. In the application, We have checked dispose methods of application objects completly. I am sure that application objects are properly disposed in the application. I hope the problem not with application objects. The problem with Crystal report objects.
Application properly communicates the dispose methods to crystal report objects. Crystal report objects are not released from
the memory.
Crystal report 2008 Serive Pack 2 setup installed in the server.
As you said, If Crystal report runtime is not released from memory then memory consumption keep increase??? In service oriented architecture application, how to unload the crystal report runtime??
Do you any fix for this kind of issue??
Willl Crystal report 2008 service pack 3 help on this issue??

Just got the iPhone6 and did the iCloud setup from a previous backup of my old iPhone5. iPhone6 is now continuously trying to download the renweb app. When I try to delete the renweb app, it will not delete. How can I get rid of the app??

How can I delete the app off my phone without going through the entire setup of the new phone again? App will not delete the normal way. I hit delete and it just stays on the phone and tries to download over and over.

If it has a cloud icon it means its no longer on your device. Tapping on the cloud will effectively reinstall the App from scratch to your device.
There is no way to remove it from the cloud because its not yours to remove from there. Its the general App repository, you are just given access to it to download content you've already purchased.

How to QA the RAC setup

Similar Messages

Maybe you are looking for